Rfc9483
TitleLightweight Certificate Management Protocol (CMP) Profile
AuthorH. Brockhaus, D. von Oheimb, S. Fries
DateNovember 2023
Format:HTML, TXT, PDF, XML
Status:PROPOSED STANDARD





Internet Engineering Task Force (IETF)                      H. Brockhaus
Request for Comments: 9483                                 D. von Oheimb
Category: Standards Track                                       S. Fries
ISSN: 2070-1721                                                  Siemens
                                                           November 2023


       Lightweight Certificate Management Protocol (CMP) Profile

Abstract

   This document aims at simple, interoperable, and automated PKI
   management operations covering typical use cases of industrial and
   Internet of Things (IoT) scenarios.  This is achieved by profiling
   the Certificate Management Protocol (CMP), the related Certificate
   Request Message Format (CRMF), and transfer based on HTTP or
   Constrained Application Protocol (CoAP) in a succinct but
   sufficiently detailed and self-contained way.  To make secure
   certificate management for simple scenarios and constrained devices
   as lightweight as possible, only the most crucial types of operations
   and options are specified as mandatory.  More specialized or complex
   use cases are supported with optional features.

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 7841.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   https://www.rfc-editor.org/info/rfc9483.

Copyright Notice

   Copyright (c) 2023 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Revised BSD License text as described in Section 4.e of the
   Trust Legal Provisions and are provided without warranty as described
   in the Revised BSD License.

Table of Contents

   1.  Introduction
     1.1.  How to Read This Document
     1.2.  Conventions and Terminology
     1.3.  Motivation for a Lightweight Profile of CMP
     1.4.  Special Requirements of Industrial and IoT Scenarios
     1.5.  Existing CMP Profiles
     1.6.  Compatibility with Existing CMP Profiles
     1.7.  Use of CMP in SZTP and BRSKI Environments
     1.8.  Scope of This Document
     1.9.  Structure of This Document
   2.  Solution Architecture
   3.  Generic Aspects of PKI Messages and PKI Management Operations
     3.1.  General Description of the CMP Message Header
     3.2.  General Description of the CMP Message Protection
     3.3.  General Description of CMP Message ExtraCerts
     3.4.  Generic PKI Management Operation Prerequisites
     3.5.  Generic Validation of a PKI Message
     3.6.  Error Handling
       3.6.1.  Reporting Error Conditions Upstream
       3.6.2.  Reporting Error Conditions Downstream
       3.6.3.  Handling Error Conditions on Nested Messages Used for
               Batching
       3.6.4.  PKIStatusInfo and Error Messages
   4.  PKI Management Operations
     4.1.  Enrolling End Entities
       4.1.1.  Enrolling an End Entity to a New PKI
       4.1.2.  Enrolling an End Entity to a Known PKI
       4.1.3.  Updating a Valid Certificate
       4.1.4.  Enrolling an End Entity Using a PKCS #10 Request
       4.1.5.  Using MAC-Based Protection for Enrollment
       4.1.6.  Adding Central Key Pair Generation to Enrollment
         4.1.6.1.  Using the Key Transport Key Management Technique
         4.1.6.2.  Using the Key Agreement Key Management Technique
         4.1.6.3.  Using the Password-Based Key Management Technique
     4.2.  Revoking a Certificate
     4.3.  Support Messages
       4.3.1.  Get CA Certificates
       4.3.2.  Get Root CA Certificate Update
       4.3.3.  Get Certificate Request Template
       4.3.4.  CRL Update Retrieval
     4.4.  Handling Delayed Delivery
   5.  PKI Management Entity Operations
     5.1.  Responding to Requests
       5.1.1.  Responding to a Certificate Request
       5.1.2.  Responding to a Confirmation Message
       5.1.3.  Responding to a Revocation Request
       5.1.4.  Responding to a Support Message
       5.1.5.  Initiating Delayed Delivery
     5.2.  Forwarding Messages
       5.2.1.  Not Changing Protection
       5.2.2.  Adding Protection and Batching of Messages
         5.2.2.1.  Adding Protection to a Request Message
         5.2.2.2.  Batching Messages
       5.2.3.  Replacing Protection
         5.2.3.1.  Not Changing Proof-of-Possession
         5.2.3.2.  Using raVerified
     5.3.  Acting on Behalf of Other PKI Entities
       5.3.1.  Requesting a Certificate
       5.3.2.  Revoking a Certificate
   6.  CMP Message Transfer Mechanisms
     6.1.  HTTP Transfer
     6.2.  CoAP Transfer
     6.3.  Piggybacking on Other Reliable Transfer
     6.4.  Offline Transfer
       6.4.1.  File-Based Transfer
       6.4.2.  Other Asynchronous Transfer Protocols
   7.  Conformance Requirements
     7.1.  PKI Management Operations
     7.2.  Message Transfer
   8.  IANA Considerations
   9.  Security Considerations
   10. References
     10.1.  Normative References
     10.2.  Informative References
   Appendix A.  Example CertReqTemplate
   Acknowledgements
   Authors' Addresses

1.  Introduction

   This document specifies PKI management operations supporting machine-
   to-machine and IoT use cases.  Its focus is to maximize automation
   and interoperability between all involved PKI entities, ranging from
   end entities (EEs) over any number of intermediate PKI management
   entities, such as registration authorities (RAs), to the Certificate
   Management Protocol (CMP) [RFC4210] endpoints of certification
   authority (CA) systems.  This profile makes use of the concepts and
   syntax specified in CMP [RFC4210] [RFC9480] [RFC9481], Certificate
   Request Message Format (CRMF) [RFC4211] [RFC9045], Cryptographic
   Message Syntax (CMS) [RFC5652] [RFC8933], HTTP transfer for CMP
   [RFC6712], and CoAP transfer for CMP [RFC9482].  CMP, CRMF, and CMS
   are feature-rich specifications, but most application scenarios use
   only a limited subset of the same specified functionality.
   Additionally, the standards are not always precise enough on how to
   interpret and implement the described concepts.  Therefore, this
   document aims to tailor the available options and specify how to use
   them in adequate detail to make the implementation of interoperable
   automated certificate management as straightforward and lightweight
   as possible.

   While this document was being developed, documents intended to
   obsolete RFC 4210 [PKIX-CMP] and RFC 6712 [HTTP-CMP] were posted, and
   they include the full set of changes described in CMP Updates
   [RFC9480].

1.1.  How to Read This Document

   This document has become longer than the authors would have liked it
   to be.  Yet apart from studying Section 3, which contains general
   requirements, the reader does not have to work through the whole
   document.  The guidance in Sections 1.9 and 7 should be used to
   figure out which parts of Sections 4 to 6 are relevant for the target
   certificate management solution, depending on the PKI management
   operations, their variants, and types of message transfer needed.

   Since conformity to this document can be achieved by implementing
   only the functionality declared mandatory in Section 7, the profile
   can still be called lightweight because, in particular for end
   entities, the mandatory-to-implement set of features is rather
   limited.

1.2.  Conventions and Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in BCP
   14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

   The term "PROHIBITED" is to be interpreted to mean that the
   respective ASN.1 field SHALL NOT be present or used.

   Technical terminology is used in conformance with [RFC4210],
   [RFC4211], [RFC5280], and IEEE 802.1AR [IEEE.802.1AR_2018].  The
   following terminology is used:

   CA:    Certification authority, which issues certificates.

   RA:    Registration authority, an optional PKI component to which a
          CA delegates certificate management functions, such as end
          entity authentication and authorization checks for incoming
          requests.  An RA can also provide conversion between various
          certificate management protocols and other protocols providing
          some operations related to certificate management.

   LRA:   Local registration authority, a specific form of RA with
          proximity to the end entities.

          Note: For ease of reading, this document also uses the term
          "RA" for LRAs in all cases where the difference is not
          relevant.

   KGA:   Key generation authority, an optional system component,
          typically colocated with an RA or CA, that offers key
          generation services to end entities.

   EE:    End entity, typically a device or service that holds a public-
          private key pair for which it manages a public key
          certificate.  An identifier for the EE is given as the subject
          of its certificate.

   The following terminology is reused from [RFC4210] as follows:

   PKI management operation:    All CMP messages belonging to a single
                                transaction.  The transaction is
                                identified by the transactionID field of
                                the message headers.

   PKI management entity:       A non-EE PKI entity, i.e., an RA or a
                                CA.

   PKI entity:                  An EE or PKI management entity.

   CMP messages are referred to by the names of PKIBody choices defined
   in Section 5.1.2 of [RFC4210] and are further described in Section 4
   of this document.

   The following terms are introduced in this document:

   CMP protection key:          The private key used to sign a CMP
                                message.

   CMP protection certificate:  The certificate related to the CMP
                                protection key.  If the keyUsage
                                extension is present, it MUST include
                                digitalSignature.

1.3.  Motivation for a Lightweight Profile of CMP

   CMP was standardized in 1999 and is implemented in several PKI
   products.  In 2005, a completely reworked and enhanced version 2 of
   CMP [RFC4210] and CRMF [RFC4211] has been published, followed by a
   document specifying a transfer mechanism for CMP messages using HTTP
   [RFC6712] in 2012.

   CMP is a capable protocol and could be used more widely.  CMP
   [RFC4210] and CMP Updates [RFC9480] offer a very large set of
   features and options.  On one hand, this makes CMP applicable to a
   very wide range of scenarios; on the other hand, a full
   implementation supporting all options is not realistic because this
   would take undue effort.

   In order to reduce complexity, the set of mandatory PKI management
   operations and variants required by this specification has been kept
   lean.  This limits development efforts and minimizes resource needs,
   which is particularly important for memory-constrained devices.  To
   this end, when there was design flexibility to either have necessary
   complexity on the EE or in the PKI management entity, this profile
   chose to include it in the PKI management entities where typically
   more computational resources are available.  Additional recommended
   PKI management operations and variants support some more complex
   scenarios that are considered beneficial for environments with more
   specific demands or boundary conditions.  The optional PKI management
   operations support less common scenarios and requirements.

   Moreover, many details of the Certificate Management Protocol have
   been left open or have not been specified in full preciseness.  The
   profiles specified in Appendices D and E of [RFC4210] define some
   more detailed PKI management operations.  Yet the specific needs of
   highly automated scenarios for machine-to-machine communication are
   not covered sufficiently.

   Profiling is a way to reduce feature richness and complexity of
   standards to what is needed for specific use cases. 3GPP and UNISIG
   already use profiling of CMP as a way to cope with these challenges.
   To profile means to take advantage of the strengths of the given
   protocol while explicitly narrowing down the options it provides to
   those needed for the purpose(s) at hand and eliminating all
   identified ambiguities.  In this way, the general aspects of the
   protocol are utilized and only the special requirements of the target
   scenarios need to be dealt with using distinct features the protocol
   offers.

   Defining a profile for a new target environment takes high effort
   because the range of available options needs to be well understood
   and the selected options need to be consistent with each other and
   suitably cover the intended application scenario.  Since most
   industrial PKI management use cases typically have much in common, it
   is worth sharing this effort, which is the aim of this document.
   Other standardization bodies can reference this document and further
   tailor the PKI management operations to their needs to avoid coming
   up with individual profiles from scratch.

1.4.  Special Requirements of Industrial and IoT Scenarios

   The profiles specified in Appendices D and E of [RFC4210] have been
   developed particularly for managing certificates of human end
   entities.  With the evolution of distributed systems and client-
   server architectures, certificates for machines and applications on
   them have become widely used.  This trend has strengthened even more
   in emerging industrial and IoT scenarios.  CMP is sufficiently
   flexible to support them well.

   Today's IT security architectures for industrial solutions typically
   use certificates for endpoint authentication within protocols like
   IPsec, TLS, or Secure Shell (SSH).  Therefore, the security of these
   architectures highly relies upon the security and availability of the
   implemented certificate management operations.

   Due to increasing security and availability needs in operational
   technology, especially when used for critical infrastructures and
   systems with a high number of certificates, a state-of-the-art
   certificate management system must be constantly available and cost-
   efficient, which calls for high automation and reliability.
   Consequently, "Framework for Improving Critical Infrastructure
   Cybersecurity" [NIST.CSWP.04162018] refers to proper processes for
   issuance, management, verification, revocation, and audit of
   authorized devices, users, and processes involving identity and
   credential management.  According to commonly accepted best
   practices, such PKI management operations are also required in
   [IEC.62443-3-3] for security level 2 and higher.

   Further challenges in many industrial systems are network
   segmentation and asynchronous communication.  Also, PKI management
   entities like certification authorities (CAs) are not typically
   deployed on-site but in a highly protected data center environment,
   e.g., operated according to ETSI Policy and security requirements for
   Trust Service Providers issuing certificates [ETSI-EN.319411-1].
   Certificate management must be able to cope with such network
   architectures.  CMP offers the required flexibility and
   functionality, namely authenticated self-contained messages,
   efficient polling, and support for asynchronous message transfer
   while retaining end-to-end authentication.

1.5.  Existing CMP Profiles

   As already stated, [RFC4210] contains profiles with mandatory and
   optional PKI management operations in Appendices D and E of
   [RFC4210].  Those profiles focus on management of human user
   certificates and only partly address the specific needs of
   certificate management automation for unattended devices or machine-
   to-machine application scenarios.

   Both Appendices D and E of [RFC4210] focus on PKI management
   operations between an EE and an RA or CA.  They do not address
   further profiling of RA-to-CA communication, which is typically
   needed for full backend automation.  All requirements regarding
   algorithm support for Appendices D and E of [RFC4210] have been
   updated by Section 7.1 of CMP Algorithms [RFC9481].

   3GPP makes use of CMP [RFC4210] in its Technical Specification 33.310
   [ETSI-3GPP.33.310] for automatic management of IPsec certificates in
   3G, LTE, and 5G backbone networks.  Since 2010, a dedicated CMP
   profile for initial certificate enrollment and certificate update
   operations between EEs and RAs/CAs is specified in that document.

   In 2015, UNISIG included a CMP profile for enrollment of TLS
   certificates in the Subset-137 specifying the ETRAM/ETCS online key
   management for train control systems [UNISIG.Subset-137].

   Both standardization bodies tailor CMP [RFC4210], CRMF [RFC4211], and
   HTTP transfer for CMP [RFC6712] for highly automated and reliable PKI
   management operations for unattended devices and services.

1.6.  Compatibility with Existing CMP Profiles

   The profile specified in this document is compatible with Appendices
   D and E of [RFC4210], with the following exceptions:

   *  signature-based protection is the default protection; an initial
      PKI management operation may also use protection based on the
      message authentication code (MAC),

   *  certification of a second key pair within the same PKI management
      operation is not supported,

   *  proof-of-possession (POP) with the self-signature of the certReq
      containing the certTemplate (according to [RFC4211], Section 4.1,
      clause 3) is the recommended default POP method (deviations are
      possible for EEs when requesting central key generation, for RAs
      when using raVerified, and if the newly generated keypair is
      technically not capable to generate digital signatures),

   *  confirmation of newly enrolled certificates may be omitted, and

   *  all PKI management operations consist of request-response message
      pairs originating at the EE, i.e., announcement messages
      (requiring a push model, a CMP server on the EE) are excluded in
      favor of a lightweight implementation on the EE.

   The profile specified in this document is compatible with the CMP
   profile for 3G, LTE, and 5G network domain security and
   authentication framework [ETSI-3GPP.33.310], except that:

   *  protection of initial PKI management operations may be MAC-based,

   *  the subject field is mandatory in certificate templates, and

   *  confirmation of newly enrolled certificates may be omitted.

   The profile specified in this document is compatible with the CMP
   profile for online key management in rail networks as specified in
   [UNISIG.Subset-137], except that:

   *  A certificate enrollment request message consists of only one
      certificate request (CertReqMsg).

   *  [RFC4210] requires that the messageTime is Greenwich Mean Time
      coded as generalizedTime.

      Note: As Table 5 of [UNISIG.Subset-137] explicitly states that the
      messageTime is required to be "UTC time", it is not clear if this
      means a coding as UTCTime or generalizedTime and if time zones
      other than Greenwich Mean Time shall be allowed.  Both time
      formats are described in Section 4.1.2.5 of [RFC5280].

   *  The same type of protection is required to be used for all
      messages of one PKI management operation.  This means, in case the
      request message protection is MAC-based, the response, certConf,
      and pkiConf messages must also have MAC-based protection.

   *  Use of caPubs is not required but is typically allowed in
      combination with MAC-based protected PKI management operations.
      On the other hand, Table 12 of [UNISIG.Subset-137] requires using
      caPubs.

      Note: It remains unclear from UNISIG Subset-137 which
      certificate(s) for the caPubs field should be used.  For security
      reasons, it cannot be used for delivering the root CA certificate
      needed to validate the signature-based protection of the given
      response message (as stated indirectly also in Section 6.3.1.5.2 b
      of [UNISIG.Subset-137]).

   *  This profile requires that the certConf message have one
      CertStatus element where the statusInfo field is recommended.

      Note: In contrast, Table 18 of [UNISIG.Subset-137] requires that
      the certConf message has one CertStatus element where the
      statusInfo field must be absent.  This precludes sending a
      negative certConf message in case the EE rejects the newly
      enrolled certificate.  This results in violating the general rule
      that a certificate request transaction must include a certConf
      message (moreover, since using implicitConfirm is not allowed
      there either).

1.7.  Use of CMP in SZTP and BRSKI Environments

   In Secure Zero Touch Provisioning (SZTP) [RFC8572] and other
   environments using Network Configuration Protocol (NETCONF) / YANG
   modules, [SZTP-CSR] offers a YANG module that includes several types
   of certificate requests to obtain a public key certificate for a
   locally generated key pair.  Such messages are of the form ietf-ztp-
   types:cmp-csr from module ietf-ztp-csr and offer both proof-of-
   possession and proof-of-identity.  To allow PKI management entities
   that use the module ietf-ztp-csr and also wish to comply with this
   profile, the ir, cr, kur, or p10cr message MUST be formatted by the
   EE as described in Section 4.1, and it MAY be forwarded, as specified
   in Section 5.2.

   In Bootstrapping Remote Secure Key Infrastructure (BRSKI) [RFC8995]
   environments, "BRSKI-AE: Alternative Enrollment Protocols in BRSKI"
   [BRSKI-AE] describes a generalization regarding the employed
   enrollment protocols to allow alternatives to Enrollment over Secure
   Transport (EST) [RFC7030].  For the use of CMP, it requires adherence
   to this profile.

1.8.  Scope of This Document

   On one hand, this profile intends to reduce the flexibility of CMP to
   the generic needs of automated certificate management of machine end
   entities.  On the other hand, it offers a variety of PKI management
   operations and options relevant for industrial use cases.  Therefore,
   it is still a framework that supports further profiling by those
   addressing a specific use case or scenario, e.g., 3GPP/ETSI or
   UNISIG.  There is room to further tailor this profile.  This enables
   stricter profiling to meet the concrete needs in application areas.

   To minimize ambiguity and complexity through needless variety, this
   document specifies exhaustive requirements for generating PKI
   management messages on the sender side.  However, it gives only
   minimal requirements on checks by the receiving side and how to
   handle error cases.

   Especially on the EE side, this profile aims at a lightweight
   implementation.  This means that the number of PKI management
   operation implementations are reduced to a reasonable minimum to
   support typical certificate management use cases in industrial
   machine-to-machine environments.  On the EE side, only limited
   resources are expected, while on the side of the PKI management
   entities, the profile accepts higher requirements.

   For the sake of interoperability and robustness, implementations
   should, so long as security is not affected, adhere to Postel's law:
   "Be conservative in what you do, be liberal in what you accept from
   others" (often reworded as: "Be conservative in what you send, be
   liberal in what you receive").

   Fields used in ASN.1 syntax in Sections 3, 4, or 5 are specified in
   CMP [RFC4210] [RFC9480], CRMF [RFC4211], and CMS [RFC5652] [RFC8933].
   When these sections do not explicitly discuss a field, then the field
   SHOULD NOT be used by the sending entity.  The receiving entity MUST
   NOT require the absence of such a field and, if the field is present,
   MUST handle it gracefully.

1.9.  Structure of This Document

   Section 2 introduces the general PKI architecture and approach to
   certificate management that is assumed in this document.

   Section 3 profiles the generic aspects of the PKI management
   operations specified in detail in Sections 4 and 5 to minimize
   redundancy in the description and to ease implementation.  This
   covers the general structure and protection of messages, as well as
   generic prerequisites, validation, and error handling.

   Section 4 profiles the exchange of CMP messages between an EE and the
   PKI management entity.  There are various flavors of certificate
   enrollment requests, optionally with polling, central key generation,
   revocation, and general support PKI management operations.

   Section 5 profiles responding to requests, exchanges between PKI
   management entities, and operations on behalf of other PKI entities.
   This may include delayed delivery of messages, which involves polling
   for responses, and nesting of messages.

   Section 6 outlines several mechanisms for CMP message transfer,
   including HTTP-based transfer [RFC6712] optionally using TLS, CoAP-
   based transfer [RFC9482] optionally using DTLS, and offline file-
   based transport.

   Section 7 defines which parts of the profile are mandatory,
   recommended, optional, or not relevant to implement for which type of
   entity.

2.  Solution Architecture

   To facilitate secure automatic certificate enrollment, the device
   hosting an EE is typically equipped with a manufacturer-issued device
   certificate.  Such a certificate is typically installed during
   production and is meant to identify the device throughout its
   lifetime.  This certificate can be used to protect the initial
   enrollment of operational certificates after installation of the EE
   in its operational environment.  In contrast to the manufacturer-
   issued device certificate, operational certificates are issued by the
   owner or operator of the device to identify the device or one of its
   components for operational use, e.g., in a security protocol like
   IPsec, TLS, or SSH.  In IEEE 802.1AR [IEEE.802.1AR_2018], a
   manufacturer-issued device certificate is called an Initial Device
   Identifier (IDevID) certificate and an operational certificate is
   called a Locally Significant Device Identifier (LDevID) certificate.

   Note: The owner or operator using the manufacturer-issued device
   certificate for authenticating the device during initial enrollment
   of operational certificates MUST trust the respective trust anchor
   provided by the manufacturer.

   Note: According to IEEE 802.1AR [IEEE.802.1AR_2018], a DevID
   comprises the triple of the certificate, the corresponding private
   key, and the certificate chain.

   All certificate management operations specified in this document
   follow the pull model, i.e., they are initiated by an EE (or by an RA
   acting as an EE).  The EE creates a CMP request message, protects it
   using some asymmetric credential or shared secret information, and
   sends it to a PKI management entity.  This PKI management entity may
   be a CA or more typically an RA, which checks the request and
   responds to it itself or forwards the request upstream to the next
   PKI management entity.  In case an RA changes the CMP request message
   header or body or wants to demonstrate successful verification or
   authorization, it can apply a protection of its own.  The
   communication between an LRA and RA can be performed synchronously or
   asynchronously.  Asynchronous communication typically leads to
   delayed message delivery as described in Section 4.4.

   +-----+            +-----+                +-----+            +-----+
   |     |            |     |                |     |            |     |
   | EE  |<---------->| LRA |<-------------->| RA  |<---------->| CA  |
   |     |            |     |                |     |            |     |
   +-----+            +-----+                +-----+            +-----+

           synchronous        (a)synchronous       (a)synchronous
      +----connection----+------connection------+----connection----+

                                     operators        service partner
   +---------on site---------+---back-end services--+---trust center--+

                <--- downstream <--- | ---> upstream --->

           Figure 1: Certificate Management Architecture Example

   In operational environments, the certificate management architecture
   can have multiple LRAs bundling requests from multiple EEs at
   dedicated locations and one (or more than one) central RA aggregating
   the requests from the LRAs.  Every LRA in this scenario has shared
   secret information (one per EE) for MAC-based protection or a CMP
   protection key and certificate, allowing it to protect CMP messages
   it processes using its own credentials.  The figure above shows an
   architectural example with one LRA, RA, and CA.  It is also possible
   not to have an RA or LRA or that there is no CA with a CMP interface.
   Depending on the network infrastructure, the message transfer between
   PKI management entities may be based on synchronous online
   connections, asynchronous connections, or even offline (e.g., file-
   based) transfer.

   Note: In contrast to the pull model used in this document, other
   specifications could use the messages specified in this document to
   implement the push model.  In this case, the EE is pushed (triggered)
   by the PKI management entity to provide the CMP request; therefore,
   the EE acts as the receiver, not initiating the interaction with the
   PKI.  For example, when the device itself only acts (as a server as
   described in BRSKI with Pledge in Responder Mode [BRSKI-PRM]),
   support of certificate enrollment in a push model is needed.  While
   BRSKI-PRM currently utilizes its own format for the exchanges, CMP in
   general and the messages specified in this profile offer all required
   capabilities.  Nevertheless, the message flow and state machine as
   described in Section 4 must be adapted to implement a push model.

   Note: Third-party CAs not conforming to this document may implement
   other variants of CMP, different standardized protocols, or even
   proprietary interfaces for certificate management.  In such cases, an
   RA needs to adapt the exchanged CMP messages to the flavor of
   certificate management interaction required by such a nonconformant
   CA.

3.  Generic Aspects of PKI Messages and PKI Management Operations

   This section covers the generic aspects of the PKI management
   operations specified in Sections 4 and 5 as upfront general
   requirements to minimize redundancy in the description and to ease
   implementation.

   As described in Section 5.1 of [RFC4210], all CMP messages have the
   following general structure:

              +--------------------------------------------+
              | PKIMessage                                 |
              | +----------------------------------------+ |
              | | header                                 | |
              | +----------------------------------------+ |
              | +----------------------------------------+ |
              | | body                                   | |
              | +----------------------------------------+ |
              | +----------------------------------------+ |
              | | protection (OPTIONAL)                  | |
              | +----------------------------------------+ |
              | +----------------------------------------+ |
              | | extraCerts (OPTIONAL)                  | |
              | +----------------------------------------+ |
              +--------------------------------------------+

                      Figure 2: CMP Message Structure

   The general contents of the message header, protection, and
   extraCerts fields are specified in the following three subsections.

   In case a specific PKI management operation needs different contents
   in the header, protection, or extraCerts fields, the differences are
   described in the respective subsections of Sections 4 and 5.

   The CMP message body contains the PKI management operation-specific
   information.  It is described in Sections 4 and 5.

   Note: In the description of CMP messages, the presence of some fields
   is stated as OPTIONAL or RECOMMENDED.  The following text that states
   requirements on such a field applies only if the field is present.

   The generic prerequisites needed by the PKI entities in order to
   perform PKI management operations are described in Section 3.4.

   The generic validation steps to be performed by PKI entities upon
   receiving a CMP message are described in Section 3.5.

   The generic aspects of handling and reporting errors are described in
   Section 3.6.

3.1.  General Description of the CMP Message Header

   This section describes the generic header fields of all CMP messages.

   Any fields or variations specific to PKI management operation are
   described in Sections 4 and 5.

   header
     pvno                        REQUIRED
       -- MUST be 3 to indicate CMP v3 in all cases where EnvelopedData
       --   is supported and expected to be used in the current
       --   PKI management operation
       -- MUST be 3 to indicate CMP v3 in certConf messages when using
       --   the hashAlg field
       -- MUST be 2 to indicate CMP v2 in all other cases
       -- For details on version negotiation, see [RFC9480]
     sender                      REQUIRED
       -- Contains a name representing the originator, which also
       --   protects the message
       -- For signature-based protection, MUST be the subject field of
       --   the CMP protection certificate
       -- For MAC-based protection, MUST contain a name the PKI
       --   management entity can use to identify the shared secret
       --   information. This name MUST be placed in the commonName
       --   field of the directoryName choice.
       -- In a multihop scenario, the receiving entity cannot rely
       --   on the correctness of the sender field.
     recipient                   REQUIRED
       -- SHOULD be the name of the intended recipient; otherwise, the
       --   NULL-DN MUST be used
       -- In the first message of a PKI management operation, SHOULD be
       --   the subject DN of the CA the PKI management operation is
       --   requested from
       -- In all other messages, SHOULD contain the value of the sender
       --   field of the previous message in the same PKI management
       --   operation
       -- The recipient field shall be handled gracefully by the
       --   receiving entity, because in a multihop scenario, its
       --   correctness cannot be guaranteed.
     messageTime                 OPTIONAL
       -- MUST be present if the confirmWaitTime field is present
       -- MUST be the time at which the message was produced, if present
       -- MAY be set by a PKI management entity to provide the current
       --   time
       -- MAY be used by the end entity for time synchronization if the
       --   response was received within a short time frame
     protectionAlg               REQUIRED
       -- MUST be an algorithm identifier indicating the algorithm
       --   used for calculating the protection bits
       -- If it is a signature algorithm, its type MUST be
       --   MSG_SIG_ALG as specified in Section 3 of [RFC9481] and
       --   MUST be consistent with the subjectPublicKeyInfo field of
       --   the CMP protection certificate
       -- If it is a MAC algorithm, its type MUST be MSG_MAC_ALG, as
       --   specified in [RFC9481], Section 6.1
     senderKID                   RECOMMENDED
       -- For signature-based protection, MUST be used and contain the
       --   value of the SubjectKeyIdentifier if present in the CMP
       --   protection certificate
       -- For MAC-based protection, MUST be used and contain the same
       --   name as in the commonName field of the sender field
     transactionID               REQUIRED
       -- In the first message of a PKI management operation, MUST be
       --   128 bits of random data to minimize the probability of
       --   having the transactionID already in use at the server
       -- In all other messages, MUST be the value from the previous
       --   message in the same PKI management operation
     senderNonce                 REQUIRED
       -- MUST be cryptographically secure and fresh 128 random bits
     recipNonce                  RECOMMENDED
       -- If this is the first message of a transaction, MUST be absent
       -- If this is a delayed response message, MUST be present and
       --   contain the value of the senderNonce of the respective
       --   request message in the same transaction
       -- In all other messages, MUST be present and contain the value
       --   of the senderNonce of the previous message in the same
       --   transaction
     generalInfo                 OPTIONAL
       implicitConfirm           OPTIONAL
       -- RECOMMENDED in ir/cr/kur/p10cr messages,
       -- OPTIONAL in ip/cp/kup response messages, and
       -- PROHIBITED in other types of messages
       -- Added to request messages to request omission of the certConf
       --   message
       -- Added to response messages to grant omission of the certConf
       --   message
       -- See [RFC4210], Section 5.1.1.1.
         ImplicitConfirmValue   REQUIRED
       -- ImplicitConfirmValue MUST be NULL
       confirmWaitTime           OPTIONAL
       -- RECOMMENDED in ip/cp/kup messages if implicitConfirm is
       --   not included
       -- PROHIBITED if implicitConfirm is included
       -- See [RFC4210], Section 5.1.1.2.
         ConfirmWaitTimeValue    REQUIRED
       -- ConfirmWaitTimeValue MUST be a GeneralizedTime value
       --   specifying the point in time up to which the PKI management
       --   entity will wait for the certConf message.  The accepted
       --   length of the waiting period will vary by use case.
       certProfile               OPTIONAL
       -- MAY be present in ir/cr/kur/p10cr and in genm messages of type
       --   id-it-certReqTemplate
       -- MUST be omitted in all other messages
       -- See [RFC9480].
         CertProfileValue        REQUIRED
       -- MUST contain a sequence of one UTF8String element
       -- MUST contain the name of a certificate profile

3.2.  General Description of the CMP Message Protection

   This section describes the generic protection field contents of all
   CMP messages.  For signature-based protection, which is the default
   protection mechanism for all CMP messages described in this profile,
   the CMP protection key and CMP protection certificate are used.  For
   MAC-based protection, shared secret information is used as described
   in Section 4.1.5.

   protection
       -- If present, the same kind of protection MUST be used for all
       --   messages of that PKI management operation.
       -- MUST be present, except if protection is not possible for
       --   error messages as described in Section 3.6.4
       -- For signature-based protection, MUST contain the signature
       --   calculated using the CMP protection key of the entity
       --   protecting the message
       -- For MAC-based protection, MUST contain a MAC calculated using
       --   the shared secret information
       -- The protection algorithm used MUST be given in the
       --   protectionAlg field.

   The CMP message protection provides, if available, message origin
   authentication and integrity protection for the header and body.  The
   CMP message extraCerts field is not covered by this protection.

   Note: The extended key usages described in Section 2.2 of CMP Updates
   [RFC9480] can be used for authorization of a sending PKI management
   entity.

3.3.  General Description of CMP Message ExtraCerts

   This section describes the generic extraCerts field of all CMP
   messages.  Any specific requirements on the extraCerts are specified
   in the respective PKI management operation.

   extraCerts
       -- MUST be present for signature-based protection and contain the
       --   CMP protection certificate together with its chain for the
       --   first request and response message of a PKI management
       --   operation.  MAY be omitted in certConf, PKIConf, pollReq,
       --   and pollRep messages.  The first certificate in this field
       --   MUST be the CMP protection certificate followed by its
       --   chain, where each element should directly certify the one
       --   immediately preceding it.
       -- MUST be present in ip, cp, and kup messages and contain the
       --   chain of a newly issued certificate.
       -- Self-signed certificates should be omitted from extraCerts and
       --   MUST NOT be trusted based on their inclusion in any case

   Note: One reason for adding a self-signed certificate to extraCerts
   is if it is the CMP protection certificate or a successor root CA
   self-signed certificate as indicated in the HashOfRootKey extension
   of the current root CA certificate; see [RFC8649].  Another reason
   for including self-signed certificates in the extraCerts is, for
   instance, due to storage limitations.  A receiving PKI entity may not
   have the complete trust anchor information available but just a
   unique identification of it and thus needs the full trust anchor
   information carried in a self-signed certificate for further
   processing (see Section 9).

   For maximum interoperability, all implementations SHOULD be prepared
   to handle potentially additional certificates and arbitrary orderings
   of the certificates.

3.4.  Generic PKI Management Operation Prerequisites

   This subsection describes what is generally needed by the PKI
   entities to be able to perform PKI management operations.

   Identification of PKI entities:

   *  For signature-based protection, each EE knows its own identity
      from the CMP protection certificate; for MAC-based protection, it
      MAY know its identity to fill the sender field.

   *  Each EE MAY know the intended recipient of its requests to fill
      the recipient field, e.g., the name of the addressed CA.

      Note: This name may be established using an enrollment voucher (as
      described in [RFC8366]), the issuer field from a CertReqTemplate
      response message content, or by other configuration means.

   Routing of CMP messages:

   *  Each PKI entity sending messages upstream MUST know the address
      needed for transferring messages to the next PKI management entity
      in case online transfer is used.

      Note: This address may depend on the recipient, the certificate
      profile, and the used transfer mechanism.

   Authentication of PKI entities:

   *  Each PKI entity MUST have credentials to authenticate itself.  For
      signature-based protection, it MUST have a private key and the
      corresponding certificate along with its chain.

   *  Each PKI entity MUST be able to establish trust in the PKI it
      receives responses from.  When signature-based protection is used,
      it MUST have the trust anchor(s) and any certificate status
      information needed to perform path validation of CMP protection
      certificates used for signature-based protection.

      Note: A trust anchor is usually a root certificate of the PKI
      addressed by the requesting EE.  It may be established by
      configuration or in an out-of-band manner.  For an EE, it may be
      established using an enrollment voucher [RFC8366] or in-band of
      CMP by the caPubs field in a certificate response message.

   Authorization of PKI management operations:

   *  Each EE or RA MUST have sufficient information to be able to
      authorize the PKI management entity to perform the upstream PKI
      management operation.

      Note: This may be achieved, for example, by using the cmcRA
      extended key usage in server certificates, by local configuration
      (such as specific name patterns for subject Distinguished Name
      (DN) or Subject Alternative Name (SAN) portions that may identify
      an RA) and/or by having a dedicated root CA usable only for
      authenticating PKI management entities.

   *  Each PKI management entity MUST have sufficient information to be
      able to authorize the downstream PKI entity requesting the PKI
      management operation.

      Note: For authorizing an RA, the same examples apply as above.
      The authorization of EEs can be very specific to the application
      domain based on local PKI policy.

3.5.  Generic Validation of a PKI Message

   This section describes generic validation steps of each PKI entity
   receiving a PKI request or response message before any further
   processing or forwarding.  If a PKI management entity decides to
   terminate a PKI management operation because a check failed, it MUST
   send a negative response or an error message as described in
   Section 3.6.  The PKIFailureInfo bits given below in parentheses MAY
   be used in the failInfo field of the PKIStatusInfo as described in
   Section 3.6.4; also see Appendix F of [RFC4210].

   All PKI message header fields not mentioned in this section, like the
   recipient and generalInfo fields, SHOULD be handled gracefully upon
   receipt.

   The following list describes the basic set of message input
   validation steps.  Without these checks, the protocol becomes
   dysfunctional.

   *  The formal ASN.1 syntax of the whole message MUST be compliant
      with the definitions given in CMP [RFC4210] [RFC9480], CRMF
      [RFC4211], and CMS [RFC5652] [RFC8933]. (failInfo: badDataFormat)

   *  The pvno MUST be cmp2000(2) or cmp2021(3). (failInfo bit:
      unsupportedVersion)

   *  The transactionID MUST be present. (failInfo bit: badDataFormat)

   *  The PKI message body type MUST be one of the message types
      supported by the receiving PKI entity and MUST be allowed in the
      current state of the PKI management operation identified by the
      given transactionID. (failInfo bit: badRequest)

   The following list describes the set of message input validation
   steps required to ensure secure protocol operation:

   *  The senderNonce MUST be present and MUST contain at least 128 bits
      of data. (failInfo bit: badSenderNonce)

   *  Unless the PKI message is the first message of a PKI management
      operation,

      -  the recipNonce MUST be present and MUST equal the senderNonce
         of the previous message or equal the senderNonce of the most
         recent request message for which the response was delayed, in
         case of delayed delivery as specified in Section 4.4. (failInfo
         bit: badRecipientNonce)

   *  Messages without protection MUST be rejected except for error
      messages as described in Section 3.6.4.

   *  The message protection MUST be validated when present, and
      messages with an invalid protection MUST be rejected.

      -  The protection MUST be signature-based except if MAC-based
         protection is used as described in Sections 4.1.5 and 4.1.6.3.
         (failInfo bit: wrongIntegrity)

      -  If present, the senderKID MUST identify the key material needed
         for verifying the message protection. (failInfo bit:
         badMessageCheck)

      -  If signature-based protection is used, the CMP protection
         certificate MUST be successfully validated, including path
         validation using a trust anchor, and MUST be authorized
         according to local policies.  If the keyUsage extension is
         present in the CMP protection certificate, the digitalSignature
         bit MUST be set. (failInfo bit: badAlg, badMessageCheck, or
         signerNotTrusted)

      -  The sender of a request message MUST be authorized to request
         the operation according to PKI policies. (failInfo bit:
         notAuthorized)

   Note: The requirements for checking certificates given in [RFC5280]
   MUST be followed for signature-based CMP message protection.  Unless
   the message is a positive ip/cp/kup, where the issuing CA certificate
   of the newly enrolled certificate is the same as the CMP protection
   certificate of that message, certificate status checking SHOULD be
   performed on the CMP protection certificates.  If the response
   message contains the caPubs field to transfer new trust anchor
   information, the CMP protection is crucial and certificate status
   checking is REQUIRED.  For other cases, it MAY be acceptable to omit
   certificate status checking when respective information is not
   available.

   Depending on local policies, one or more of the input validation
   checks described below need to be implemented:

   *  If signature-based protection is used, the sender field MUST match
      the subject of the CMP protection certificate. (failInfo bit:
      badMessageCheck)

   *  If the messageTime is present and

      -  the receiving system has a reliable system time, the
         messageTime MUST be close to the current time of the receiving
         system, where the threshold will vary by use case. (failInfo
         bit: badTime)

      -  the receiving system does not have a reliable system time, the
         messageTime MAY be used for time synchronization.

3.6.  Error Handling

   This section describes how a PKI entity handles error conditions on
   messages it receives.  Each error condition should be logged
   appropriately to allow root-cause analysis of failure cases.

3.6.1.  Reporting Error Conditions Upstream

   An EE SHALL NOT send error messages.  PKI management entities SHALL
   NOT send error messages in the upstream direction either.

   In case an EE rejects a newly issued certificate contained in an ip,
   cp, or kup message and implicit confirmation has not been granted,
   the EE MUST report this using a certConf message with "rejection"
   status and await the pkiConf response as described in Section 4.1.1.

   On all other error conditions regarding response messages, the EE or
   PKI management entity MUST regard the current PKI management
   operation as terminated with failure.  The error conditions include:

   *  invalid response message header, body type, protection, or
      extraCerts, according to the checks described in Section 3.5,

   *  any issue detected with response message contents,

   *  receipt of an error message from upstream,

   *  timeout occurred while waiting for a response, and

   *  rejection of a newly issued certificate while implicit
      confirmation has been granted.

   Upstream PKI management entities will not receive any CMP message to
   learn that the PKI management operation has been terminated.  In case
   they expect a further message from the EE, a connection interruption
   or timeout will occur.  The value set for such timeouts will vary by
   use case.  Then they MUST also regard the current PKI management
   operation as terminated with failure and MUST NOT attempt to send an
   error message downstream.

3.6.2.  Reporting Error Conditions Downstream

   In case the PKI management entity detects an error condition, e.g.,
   rejecting the request due to policy decision, in the body of an ir,
   cr, p10cr, kur, or rr message received from downstream, it MUST
   report the error in the specific response message, i.e., an ip, cp,
   kup, or rp with "rejection" status, as described in Sections 4.1.1
   and 4.2.  This can also happen in case of polling.

   In case the PKI management entity detects any other error condition
   on requests (including pollReq, certConf, genm, and nested messages)
   received from downstream and on responses received from upstream
   (such as invalid message header, body type, protection, or
   extraCerts, according to the checks described in Section 3.5), it
   MUST report them downstream in the form of an error message as
   described in Section 3.6.4.

3.6.3.  Handling Error Conditions on Nested Messages Used for Batching

   Batching of messages using nested messages as described in
   Section 5.2.2.2 requires special error handling.

   If the error condition is on an upstream nested message containing
   batched requests, it MUST NOT attempt to respond to the individual
   requests included in it but to the nested message itself.

   In case a PKI management entity receives an error message in response
   to a nested message, it must propagate the error by responding with
   an error message to each of the request messages contained in the
   nested message.

   In case a PKI management entity detects an error condition on the
   downstream nested message received in response to a nested message
   sent before and the body of the received nested message still parses,
   it MAY ignore this error condition and handle the included responses
   as described in Section 5.2.2.2.  Otherwise, it MUST propagate the
   error by responding with an error message to each of the requests
   contained in the nested message it sent originally.

3.6.4.  PKIStatusInfo and Error Messages

   When sending any kind of negative response, including error messages,
   a PKI entity MUST indicate the error condition in the PKIStatusInfo
   structure of the respective message as described below.  Then it MUST
   regard the current PKI management operation as terminated with
   failure.

   The PKIStatusInfo structure is used to report errors.  It may be part
   of various message types, in particular, ip, cp, kup, certConf, and
   error.  The PKIStatusInfo structure consists of the following fields:

   status:  Here, the PKIStatus value "rejection" MUST be used in case
      an error was detected.  When a PKI management entity indicates
      delayed delivery of a CMP response message to the EE with an error
      message as described in Section 4.4, the status "waiting" MUST be
      used there.

   statusString:  Here, any human-readable valid value for logging or to
      display via a user interface should be added.

   failInfo:  Here, the PKIFailureInfo bits MAY be used in the way
      explained in Appendix F of [RFC4210].  PKIFailureInfo bits
      regarding the validation described in Section 3.5 are referenced
      there.  The PKIFailureInfo bits referenced in Sections 5.1 and 6
      are described here:

      badCertId:  A kur, certConf, or rr message references an unknown
         certificate.

      badPOP:  An ir/cr/kur/p10cr contains an invalid proof-of-
         possession.

      certRevoked:  Revocation is requested for a certificate that is
         already revoked.

      badCertTemplate:  The contents of a certificate request are not
         accepted, e.g., a field is missing or has an unacceptable value
         or the given public key is already in use in some other
         certificate (depending on policy).

      transactionIdInUse:  This is sent by a PKI management entity in
         case the received request contains a transactionID that is
         currently in use for another transaction.  An EE receiving such
         an error message should resend the request in a new transaction
         using a different transactionID.

      notAuthorized:  The sender of a request message is not authorized
         for requesting the operation.

      systemUnavail:  This is sent by a PKI management entity in case a
         back-end system is not available.

      systemFailure:  This is sent by a PKI management entity in case a
         back-end system is currently not functioning correctly.

   An EE receiving a systemUnavail or systemFailure failInfo should
   resend the request in a new transaction after some time.

   Detailed Message Description:

   Error Message -- error

   Field                         Value

   header
       -- As described in Section 3.1

   body
       -- The message indicating the error that occurred
     error                       REQUIRED
       pKIStatusInfo             REQUIRED
         status                  REQUIRED
       -- MUST have the value "rejection"
         statusString            OPTIONAL
       -- This field should contain any human-readable text for
       --   debugging, for logging, or to display in a GUI
         failInfo                OPTIONAL
       -- MAY be present and contain the relevant PKIFailureInfo bits

   protection                    RECOMMENDED
       -- As described in Section 3.2

   extraCerts                    RECOMMENDED
       -- As described in Section 3.3

   Protecting the error message may not be technically feasible if it is
   not clear which credential the recipient will be able to use when
   validating this protection, e.g., in case the request message was
   fundamentally broken.  In these exceptional cases, the protection of
   the error message MAY be omitted.

4.  PKI Management Operations

   This section focuses on the communication of an EE with the PKI
   management entity it directly talks to.  Depending on the network and
   PKI solution, this can be an RA or directly a CA.  Handling of a
   message by a PKI management entity is described in Section 5.

   The PKI management operations specified in this section cover the
   following:

   *  requesting a certificate with variations like initial enrollment,
      certificate updates, central key generation, and MAC-based
      protection

   *  revoking a certificate

   *  support messages

   *  polling for delayed response messages

   These operations mainly specify the message body of the CMP messages
   and utilize the specification of the message header, protection, and
   extraCerts, as specified in Section 3.  The messages are named by the
   respective field names in PKIBody, like ir, ip, cr, cp, etc.; see
   Section 5.1.2 of [RFC4210].

   The following diagram shows the EE state machine covering all PKI
   management operations described in this section, including negative
   responses, error messages described in Section 3.6.4, ip/cp/kup/error
   messages with status "waiting", and pollReq and pollRep messages as
   described in Section 4.4.

   On receiving messages from upstream, the EE MUST perform the general
   validation checks described in Section 3.5.  In case an error occurs,
   the behavior is described in Section 3.6.

   End Entity State Machine:

                            start
                              |
                              | send ir/cr/kur/p10cr/rr/genm
                              v
                    waiting for response
                              v
   +--------------------------+--------------------------+
   |                          |                          |
   | receives ip/cp/kup with  | received ip/cp/kup/error | received
   | status "accepted" or     | with status "waiting"    | rp/genp or
   | "grantedWithMods"        |                          | ip/cp/kup/
   |                          v                          | error
   |             +-------> polling                       | with status
   |             |            |                          | "rejection"
   |             | received   | send                     |
   |             | pollRep    | pollReq                  |
   |             |            v                          |
   |             |   waiting for response                |
   |             |            v                          |
   |             +------------+--------+                 |
   |                          |        |                 |
   |       received ip/cp/kup |        | received        |
   |   with status "accepted" |        | rp/genp or      |
   |     or "grantedWithMods" |        | ip/cp/kup/error |
   |                          |        | with status     |
   +---------->+<-------------+        | "rejection"     |
               v                       |                 |
   +-----------+-----+                 |                 |
   |                 |                 |                 |
   | implicitConfirm | implicitConfirm |                 |
   | granted         | not granted     |                 |
   |                 |                 |                 |
   |                 | send certConf   |                 |
   |                 v                 |                 |
   |        waiting for pkiConf*)      |                 |
   |                 |                 |                 |
   |                 | received        |                 |
   |                 v pkiConf         v                 |
   +---------------->+------->+<-------+<----------------+
                              |
                              v
                             end

   *)  In case of a delayed delivery of pkiConf responses, the same
      polling mechanism is initiated as for rp or genp messages by
      sending an error message with status "waiting".

   Note: All CMP messages belonging to the same PKI management operation
   MUST have the same transactionID because the message receiver
   identifies the elements of the operation in this way.

   This section is aligned with CMP [RFC4210], CMP Updates [RFC9480],
   and CMP Algorithms [RFC9481].

   Guidelines as well as an algorithm use profile for this document are
   available in CMP Algorithms [RFC9481].

4.1.  Enrolling End Entities

   There are various approaches for requesting a certificate from a PKI.

   These approaches differ in the way the EE authenticates itself to the
   PKI, in the form of the request being used, and how the key pair to
   be certified is generated.  The authentication mechanisms may be as
   follows:

   *  using a certificate from an external PKI, e.g., a manufacturer-
      issued device certificate, and the corresponding private key

   *  using a private key and certificate issued from the same PKI that
      is addressed for requesting a certificate

   *  using the certificate to be updated and the corresponding private
      key

   *  using shared secret information known to the EE and the PKI
      management entity

   An EE requests a certificate indirectly or directly from a CA.  When
   the PKI management entity handles the request as described in
   Section 5.1.1 and responds with a message containing the requested
   certificate, the EE MUST reply with a confirmation message unless
   implicitConfirm was granted.  The PKI management entity MUST then
   handle it as described in Section 5.1.2 and respond with a
   confirmation, closing the PKI management operation.

   The message sequences described in this section allow the EE to
   request certification of a locally or centrally generated public-
   private key pair.  The public key and the subject name identifying
   the EE MUST be present in the certTemplate of the certificate request
   message.

   Note: If the EE does not know for which subject name to request the
   certificate, it can use the subject name from the CMP protection
   certificate in case of signature-based protection or the identifier
   of the shared secret in case of MAC-based protection.

   Typically, the EE provides a signature-based proof-of-possession of
   the private key associated with the public key contained in the
   certificate request, as defined by [RFC4211], Section 4.1, clause 3.
   To this end, it is assumed that the private key can technically be
   used for signing.  This is the case for the most common algorithms
   RSA, ECDSA, and EdDSA, regardless of potentially intended
   restrictions of the key usage.

   Note: Section 4 of [RFC4211] allows for providing proof-of-possession
   using any method that a key can be used for.  In conformance with
   Section 8.1.5.1.1.2 of [NIST.SP.800-57p1r5], the newly generated
   private key may be used for self-signature, if technically possible,
   even if the keyUsage extension requested in the certificate request
   prohibits generation of digital signatures.

   The requesting EE provides the binding of the proof-of-possession to
   its identity by signature-based or MAC-based protection of the CMP
   request message containing that POP.  An upstream PKI management
   entity should verify whether this EE is authorized to obtain a
   certificate with the requested subject and other fields and
   extensions.

   The proof-of-possession is provided by signing the certReq containing
   the certTemplate with the subject name and public key.  To bind this
   proof-of-possession to the proof-of-identity of the requesting EE,
   the subject name in the certTemplate needs to identify the same
   entity as the subject name in the CMP protection certificate or match
   the identifier used with MAC-based protection.

   Note: This binding may be lost if a PKI management entity reprotects
   this request message.

   The EE MAY indicate the certificate profile to use in the certProfile
   extension of the generalInfo field in the PKIHeader of the
   certificate request message as described in Section 3.1.

   In case the EE receives a CA certificate in the caPubs field for
   installation as a new trust anchor, it MUST properly authenticate the
   message and authorize the sender as a trusted source of the new trust
   anchor.  This authorization is typically indicated using shared
   secret information for protecting an Initialization Response (ip)
   message.  Authorization can also be signature-based, using a
   certificate issued by another PKI that is explicitly authorized for
   this purpose.  A certificate received in caPubs MUST NOT be accepted
   as a trust anchor if it is the root CA certificate of the certificate
   used for protecting the message.

4.1.1.  Enrolling an End Entity to a New PKI

   This PKI management operation should be used by an EE to request a
   certificate from a new PKI using an existing certificate from an
   external PKI, e.g., a manufacturer-issued IDevID certificate
   [IEEE.802.1AR_2018], to authenticate itself to the new PKI.

   Note: In Bootstrapping Remote Secure Key Infrastructure (BRSKI)
   [RFC8995] environments, "BRSKI-AE: Alternative Enrollment Protocols
   in BRSKI" [BRSKI-AE] describes a generalization regarding enrollment
   protocols alternative to EST [RFC7030].  As replacement of EST
   simpleenroll, BRSKI-AE uses this PKI management operation for
   bootstrapping LDevID certificates.

   Specific prerequisites augmenting the prerequisites in Section 3.4
   are as follows:

   *  The certificate of the EE MUST have been enrolled by an external
      PKI, e.g., a manufacturer-issued device certificate.

   *  The PKI management entity MUST have the trust anchor of the
      external PKI.

   *  When using the generalInfo field certProfile, the EE MUST know the
      identifier needed to indicate the requested certificate profile.

   Message Flow:

   Step# EE                                  PKI management entity
     1   format ir
     2                      ->   ir      ->
     3                                        handle or
                                                forward ir
     4                                        format or receive ip
     5                                        possibly grant
                                                implicitConfirm
     6                      <-   ip      <-
     7   handle ip

   -----------------  if implicitConfirm not granted  -----------------

     8   format certConf
     9                      ->   certConf ->
    10                                        handle or
                                                forward certConf
    11                                        format or receive pkiConf
    12                      <-   pkiConf  <-
    13   handle pkiConf

   For this PKI management operation, the EE MUST include a sequence of
   one CertReqMsg in the ir.  If more certificates are required, further
   requests MUST be sent using separate PKI management operations.

   The EE MUST include the generalInfo field implicitConfirm in the
   header of the ir message as described in Section 3.1, unless it
   requires certificate confirmation.  This leaves the PKI management
   entities the choice of whether or not the EE must send a certConf
   message upon receiving a new certificate.  Depending on the PKI
   policy and requirements for managing EE certificates, it can be
   important for PKI management entities to learn if the EE accepted the
   new certificate.  In such cases, when responding with an ip message,
   the PKI management entity MUST NOT include the implicitConfirm
   extension.  In case the EE included the generalInfo field
   implicitConfirm in the request message and the PKI management entity
   does not need any explicit confirmation from the EE, the PKI
   management entity MUST include the generalInfo field implicitConfirm
   in the response message.  This prevents explicit certificate
   confirmation and saves the overhead of a further message round trip.
   Otherwise, the PKI management entity SHOULD include confirmWaitTime
   as described in Section 3.1.

   If the EE did not request implicit confirmation or implicit
   confirmation was not granted by the PKI management entity,
   certificate confirmation MUST be performed as follows.  If the EE
   successfully received the certificate, it MUST send a certConf
   message in due time.  On receiving a valid certConf message, the PKI
   management entity MUST respond with a pkiConf message.  If the PKI
   management entity does not receive the expected certConf message in
   time, it MUST handle this like a rejection by the EE.  In case of
   rejection, depending on its policy, the PKI management entity MAY
   revoke the newly issued certificate, notify a monitoring system, or
   log the event internally.

   Note: Depending on PKI policy, a new certificate may be published by
   a PKI management entity, and explicit confirmation may be required.
   In this case, it is advisable not to do the publication until a
   positive certificate confirmation has been received.  This way, the
   need to revoke the certificate on negative confirmation can be
   avoided.

   If the certificate request was rejected by the CA, the PKI management
   entity MUST return an ip message containing the status code
   "rejection" as described in Section 3.6, and the certifiedKeyPair
   field SHALL be omitted.  The EE MUST NOT react to such an ip message
   with a certConf message, and the PKI management operation MUST be
   terminated.

   Detailed Message Description:

   Initialization Request -- ir

   Field                         Value

   header
       -- As described in Section 3.1

   body
       -- The request of the EE for a new certificate
     ir                          REQUIRED
       -- MUST contain a sequence of one CertReqMsg
       -- If more certificates are required, further PKI management
       --   operations needs to be initiated
       certReq                   REQUIRED
         certReqId               REQUIRED
       -- MUST be 0
         certTemplate            REQUIRED
           version               OPTIONAL
       -- MUST be 2 if supplied
           subject               REQUIRED
       -- The EE's identity MUST be carried in the subject field
       --   and/or the subjectAltName extension.
       -- If subject name is present only in the subjectAltName
       --   extension, then the subject field MUST be NULL-DN
           publicKey             OPTIONAL
       -- MUST be present if local key generation is used
       -- MAY be absent if central key generation is requested
             algorithm           OPTIONAL
       -- MUST be present if local key generation is used and MUST
       --   include the subject public key algorithm identifier
       -- MAY be present if central key generation is requested and,
       --   if present, informs the KGA of algorithm and parameter
       --   preferences regarding the to-be-generated key pair
             subjectPublicKey    REQUIRED
       -- MUST contain the public key to be certified in case of local
       --   key generation
       -- MUST be a zero-length BIT STRING if central key generation
       --   is requested
           extensions            OPTIONAL
       -- MAY include end-entity-specific X.509 extensions of the
       --   requested certificate, like subject alternative name, key
       --   usage, and extended key usage
       -- The subjectAltName extension MUST be present if the EE subject
       --   name includes a subject alternative name.
       popo                      OPTIONAL
       -- MUST be present if local key generation is used
       -- MUST be absent if central key generation is requested
         signature               OPTIONAL
       -- MUST be used by an EE if the key can be used for signing, and
       --   if used, it MUST have the type POPOSigningKey
           poposkInput           PROHIBITED
       -- MUST NOT be used; it is not needed because subject and
       --   publicKey are both present in the certTemplate
           algorithmIdentifier   REQUIRED
       -- The signature algorithm MUST be consistent with the publicKey
       --   algorithm field of the certTemplate
           signature             REQUIRED
       -- MUST contain the signature value computed over the DER-encoded
       --   certReq
         raVerified              OPTIONAL
       -- MAY be used by an RA after verifying the proof-of-possession
       --   provided by the EE

   protection                    REQUIRED
       -- As described in Section 3.2

   extraCerts                    REQUIRED
       -- As described in Section 3.3


   Initialization Response -- ip

   Field                         Value

   header
       -- As described in Section 3.1

   body
       -- The response of the CA to the request as appropriate
     ip                          REQUIRED
       caPubs                    OPTIONAL
       -- MAY be used if the certifiedKeyPair field is present
       -- If used, it MUST contain only a trust anchor, e.g., root
       --   certificate, of the certificate contained in certOrEncCert
       response                  REQUIRED
       -- MUST contain a sequence of one CertResponse
         certReqId              REQUIRED
       -- MUST be 0
         status                  REQUIRED
       -- PKIStatusInfo structure MUST be present
           status                REQUIRED
       -- positive values allowed: "accepted", "grantedWithMods"
       -- negative values allowed: "rejection"
       -- "waiting" only allowed with a polling use case as described
       --   in Section 4.4
           statusString          OPTIONAL
       -- MAY be any human-readable text for debugging, for logging, or
       --   to display in a GUI
           failInfo              OPTIONAL
       -- MAY be present if status is "rejection"
       -- MUST be absent if status is "accepted" or "grantedWithMods"
         certifiedKeyPair        OPTIONAL
       -- MUST be present if status is "accepted" or "grantedWithMods"
       -- MUST be absent if status is "rejection"
           certOrEncCert         REQUIRED
       -- MUST be present if status is "accepted" or "grantedWithMods"
             certificate         REQUIRED
       -- MUST be present when certifiedKeyPair is present
       -- MUST contain the newly enrolled X.509 certificate
           privateKey            OPTIONAL
       -- MUST be absent in case of local key generation or "rejection"
       -- MUST contain the encrypted private key in an EnvelopedData
       --   structure as specified in Section 4.1.6 in case the
       --   private key was generated centrally

   protection                    REQUIRED
       -- As described in Section 3.2

   extraCerts                    REQUIRED
       -- As described in Section 3.3
       -- MUST contain the chain of the certificate present in
       --   certOrEncCert
       -- Duplicate certificates MAY be omitted


   Certificate Confirmation -- certConf

   Field                         Value

   header
       -- As described in Section 3.1

   body
       -- The message of the EE sends a confirmation to the PKI
       --   management entity to accept or reject the issued
       --   certificates
     certConf                    REQUIRED
       -- MUST contain a sequence of one CertStatus
       CertStatus                REQUIRED
         certHash                REQUIRED
       -- The hash algorithm to use MUST be the hash algorithm indicated
       --   in the below hashAlg field.  If the hashAlg field is not
       --   set, it MUST be the hash algorithm defined by the algorithm
       --   identifier of the certificate signature or the dedicated
       --   hash algorithm defined in [RFC9481] for the used certificate
       --   signature algorithm.
         certReqId               REQUIRED
       -- MUST be 0
         statusInfo              OPTIONAL
       -- PKIStatusInfo structure should be present
       -- Omission indicates acceptance of the indicated certificate
           status                REQUIRED
       -- positive values allowed: "accepted"
       -- negative values allowed: "rejection"
           statusString          OPTIONAL
       -- MAY be any human-readable text for debugging, for logging, or
       --   to display in a GUI
           failInfo              OPTIONAL
       -- MAY be present if status is "rejection"
       -- MUST be absent if status is "accepted"
         hashAlg                 OPTIONAL
       -- The hash algorithm to use for calculating the above certHash
       -- If used, the pvno field in the header MUST be cmp2021 (3).
       --   For backward compatibility, use of this field is
       --   NOT RECOMMENDED if the hash algorithm to use can be
       --   identified by other means; see above.

   protection                    REQUIRED
       -- As described in Section 3.2
       -- MUST use the same credentials as in the first request message
       --   of this PKI management operation

   extraCerts                    RECOMMENDED
       -- As described in Section 3.3
       -- MAY be omitted if the message size is critical and the PKI
       --   management entity caches the CMP protection certificate from
       --   the first request message of this PKI management operation


   PKI Confirmation -- pkiConf

   Field                         Value

   header
       -- As described in Section 3.1

   body
     pkiconf                     REQUIRED
       -- The content of this field MUST be NULL

   protection                    REQUIRED
       -- As described in Section 3.2
       -- MUST use the same credentials as in the first response
       --   message of this PKI management operation

   extraCerts                    RECOMMENDED
       -- As described in Section 3.3
       -- MAY be omitted if the message size is critical and the EE has
       --   cached the CMP protection certificate from the first
       --   response message of this PKI management operation

4.1.2.  Enrolling an End Entity to a Known PKI

   This PKI management operation should be used by an EE to request an
   additional certificate of the same PKI it already has certificates
   from.  The EE uses one of these existing certificates to authenticate
   itself by signing its request messages using the respective private
   key.

   Specific prerequisites augmenting the prerequisites in Section 3.4
   are as follows:

   *  The certificate used by the EE MUST have been enrolled by the PKI
      it requests another certificate from.

   *  When using the generalInfo field certProfile, the EE MUST know the
      identifier needed to indicate the requested certificate profile.

   The message sequence for this PKI management operation is identical
   to that given in Section 4.1.1, with the following changes:

   1.  The body of the first request and response SHOULD be cr and cp.
       Otherwise, ir and ip MUST be used.

       Note: Since the difference between ir/ip and cr/cp is
       syntactically not essential, an ir/ip may be used in this PKI
       management operation.

   2.  The caPubs field in the certificate response message MUST be
       absent.

4.1.3.  Updating a Valid Certificate

   This PKI management operation should be used by an EE to request an
   update for one of its certificates that is still valid.  The EE uses
   the certificate it wishes to update as the CMP protection
   certificate.  Both for authenticating itself and for proving
   ownership of the certificate to be updated, it signs the request
   messages with the corresponding private key.

   Specific prerequisites augmenting the prerequisites in Section 3.4
   are as follows:

   *  The certificate the EE wishes to update MUST NOT be expired or
      revoked and MUST have been issued by the addressed CA.

   *  A new public-private key pair should be used.

   *  When using the generalInfo field certProfile, the EE MUST know the
      identifier needed to indicate the requested certificate profile.

   The message sequence for this PKI management operation is identical
   to that given in Section 4.1.1, with the following changes:

   1.  The body of the first request and response MUST be kur and kup,
       respectively.

   2.  Protection of the kur MUST be performed using the certificate to
       be updated.

   3.  The subject field and/or the subjectAltName extension of the
       certTemplate MUST contain the EE subject name of the existing
       certificate to be updated, without modifications.

   4.  The certTemplate SHOULD contain the subject and/or subjectAltName
       extension and publicKey of the EE only.

   5.  The oldCertId control MAY be used to make clear which certificate
       is to be updated.

   6.  The caPubs field in the kup message MUST be absent.

   As part of the certReq structure of the kur, the oldCertId control is
   added after the certTemplate field.

       controls
         type                    RECOMMENDED
       -- MUST be the value id-regCtrl-oldCertID, if present
         value
           issuer                REQUIRED
           serialNumber          REQUIRED
       -- MUST contain the issuer and serialNumber of the certificate
       --   to be updated

4.1.4.  Enrolling an End Entity Using a PKCS #10 Request

   This PKI management operation can be used by an EE to request a
   certificate using the PKCS #10 [RFC2986] format to interoperate with
   CAs not supporting CRMF [RFC4211].  This offers a variation of the
   PKI management operations specified in Sections 4.1.1 to 4.1.3.

   In this PKI management operation, the public key and all further
   certificate template data MUST be contained in the subjectPKInfo and
   other certificationRequestInfo fields of the PKCS #10 structure.

   The prerequisites are the same as given in Section 4.1.2.

   The message sequence for this PKI management operation is identical
   to that given in Sections 4.1.1 to 4.1.3, with the following changes:

   1.  The body of the first request and response MUST be p10cr and cp,
       respectively.

   2.  The certReqId in the cp message MUST be -1.

   Detailed Message Description:

   Certification Request -- p10cr

   Field                         Value

   header
       -- As described in Section 3.1

   body
       -- The request of the EE for a new certificate using a PKCS #10
       --   certificate request
     p10cr                       REQUIRED
       certificationRequestInfo  REQUIRED
         version                 REQUIRED
       -- MUST be 0 to indicate PKCS #10 v1.7
         subject                 REQUIRED
       -- The EE subject name MUST be carried in the subject field
       --   and/or the subjectAltName extension.
       -- If subject name is present only in the subjectAltName
       --   extension, then the subject field MUST be NULL-DN
         subjectPKInfo           REQUIRED
           algorithm             REQUIRED
       -- MUST include the subject public key algorithm identifier
           subjectPublicKey      REQUIRED
       -- MUST include the public key to be certified
         attributes              OPTIONAL
       -- MAY include end-entity-specific X.509 extensions of the
       --   requested certificate like subject alternative name,
       --   key usage, and extended key usage
       -- The subjectAltName extension MUST be present if the EE
       --   subject name includes a subject alternative name.
       signatureAlgorithm        REQUIRED
       -- The signature algorithm MUST be consistent with the
       --   subjectPKInfo field.
       signature                 REQUIRED
       -- MUST contain the self-signature for proof-of-possession

   protection                    REQUIRED
       -- As described in Section 3.2

   extraCerts                    REQUIRED
       -- As described for the underlying PKI management operation

4.1.5.  Using MAC-Based Protection for Enrollment

   This is a variant of the PKI management operations described in
   Sections 4.1.1, 4.1.2, and 4.1.4.  It should be used by an EE to
   request a certificate of a new PKI in case it does not have a
   certificate to prove its identity to the target PKI but has some
   secret information shared with the PKI management entity.  Therefore,
   the request and response messages are MAC-protected using this shared
   secret information.  The distribution of this shared secret is out of
   scope for this document.  The PKI management entity checking the MAC-
   based protection MUST replace this protection according to
   Section 5.2.3, as the next hop may not know the shared secret
   information.

   Note: The entropy of the shared secret information is crucial for the
   level of protection when using MAC-based protection.  Further
   guidance is available in the security considerations updated by CMP
   Updates [RFC9480].

   Specific prerequisites augmenting the prerequisites in Section 3.4
   are as follows:

   *  Rather than using private keys, certificates, and trust anchors,
      the EE and the PKI management entity MUST share secret
      information.

      Note: The shared secret information MUST be established out of
      band, e.g., by a service technician during initial local
      configuration.

   *  When using the generalInfo field certProfile, the EE MUST know the
      identifier needed to indicate the requested certificate profile.

   The message sequence for this PKI management operation is identical
   to that given in Sections 4.1.1, 4.1.2, and 4.1.4, with the following
   changes:

   1.  The protection of all messages MUST be MAC-based.  Therefore,
       extraCerts fields of all messages do not contain CMP protection
       certificates and associated chains.

   2.  The sender field MUST contain a name the PKI management entity
       can use to identify the shared secret information used for
       message protection.  This name MUST be placed in the commonName
       field of the directoryName choice.  The senderKID MUST contain
       the same name as in the commonName field of the sender field.  In
       case the sending entity does not yet know for which name to
       request the certificate, it can use this commonName in the
       subject field of the certTemplate.

   See Section 6 of CMP Algorithms [RFC9481] for details on message
   authentication code algorithms (MSG_MAC_ALG) to use.  Typically,
   parameters are part of the protectionAlg field, e.g., used for key
   derivation, like a salt and an iteration count.  Such parameters
   should remain constant for message protection throughout this PKI
   management operation to reduce the computational overhead.

4.1.6.  Adding Central Key Pair Generation to Enrollment

   This is a variant of the PKI management operations described in
   Sections 4.1.1 to 4.1.4 and the variant described in Section 4.1.5.
   It needs to be used in case an EE is not able to generate its new
   public-private key pair itself or central generation of the EE key
   material is preferred.  Which PKI management entity will act as Key
   Generation Authority (KGA) and perform the key generation is a matter
   of the local implementation.  This PKI management entity MUST use a
   certificate containing the additional extended key usage extension
   id-kp-cmKGA in order to be accepted by the EE as a legitimate key
   generation authority.

   Note: As described in Section 5.3.1, the KGA can use the PKI
   management operation described in Section 4.1.2 to request the
   certificate for this key pair on behalf of the EE.

   When an EE requests central key generation for a certificate update
   using a kur message, the KGA cannot use a kur message to request the
   certificate on behalf of the EE, as the old EE credential is not
   available to the KGA for protecting this message.  Therefore, if the
   EE uses the PKI management operation described in Section 4.1.3, the
   KGA MUST act as described in Section 4.1.2 to request the certificate
   for the newly generated key pair on behalf of the EE from the CA.

   Generally speaking, it is strongly preferable to generate public-
   private key pairs locally at the EE.  This is advisable to make sure
   that the entity identified in the newly issued certificate is the
   only entity that knows the private key.

   Reasons for central key generation may include the following:

   *  lack of sufficient initial entropy

      Note: Good random numbers are not only needed for key generation
      but also for session keys and nonces in any security protocol.
      Therefore, a decent security architecture should anyways support
      good random number generation on the EE side or provide enough
      initial entropy for the random number generator seed to guarantee
      good pseudorandom number generation.  Yet maybe this is not the
      case at the time of requesting an initial certificate during
      manufacturing.

   *  lack of computational resources, in particular, for RSA key
      generation

      Note: Since key generation could be performed in advance to the
      certificate enrollment communication, it is often not time
      critical.

   Note: As mentioned in Section 2, central key generation may be
   required in a push model, where the certificate response message is
   transferred by the PKI management entity to the EE without a previous
   request message.

   The EE requesting central key generation MUST omit the publicKey
   field from the certTemplate or, in case it has a preference on the
   key type to be generated, provide this preference in the algorithm
   sub-field and fill the subjectPublicKey sub-field with a zero-length
   BIT STRING.  Both variants indicate to the PKI management entity that
   a new key pair shall be generated centrally on behalf of the EE.

   Note: As the protection of centrally generated keys in the response
   message has been extended to EncryptedKey by Section 2.7 of CMP
   Updates [RFC9480], EnvelopedData is the preferred alternative to
   EncryptedValue.  In CRMF [RFC4211], Section 2.1, point 9, the use of
   EncryptedValue has been deprecated in favor of the EnvelopedData
   structure.  Therefore, this profile requires using EnvelopedData, as
   specified in Section 6 of CMS [RFC5652].  When EnvelopedData is to be
   used in a PKI management operation, CMP v3 MUST be indicated in the
   message header already for the initial request message; see
   Section 2.20 of CMP Updates [RFC9480].

                   +----------------------------------+
                   | EnvelopedData                    |
                   | [RFC5652], Section 6             |
                   | +------------------------------+ |
                   | | SignedData                   | |
                   | | [RFC5652], Section 5         | |
                   | | +--------------------------+ | |
                   | | | AsymmetricKeyPackage     | | |
                   | | | [RFC5958]                | | |
                   | | | +----------------------+ | | |
                   | | | | private key          | | | |
                   | | | +----------------------+ | | |
                   | | +--------------------------+ | |
                   | +------------------------------+ |
                   +----------------------------------+

                 Figure 3: Encrypted Private Key Container

   The PKI management entity delivers the private key in the privateKey
   field in the certifiedKeyPair structure of the response message also
   containing the newly issued certificate.

   The private key MUST be provided as an AsymmetricKeyPackage structure
   as defined in [RFC5958].

   This AsymmetricKeyPackage structure MUST be wrapped in a SignedData
   structure, as specified in Section 5 of CMS [RFC5652] and [RFC8933],
   and signed by the KGA generating the key pair.  The signature MUST be
   performed using a private key related to a certificate asserting the
   extended key usage id-kp-cmKGA, as described in Section 2.2 of CMP
   Updates [RFC9480], to demonstrate authorization to generate key pairs
   on behalf of an EE.  For response messages using signature-based
   protection, the EE MUST validate the signer certificate contained in
   the SignedData structure and SHOULD authorize the KGA considering any
   given id-kp-cmKGA extended key usage in the signer certificate.  For
   response messages using MAC-based protection, the EE MAY omit the
   validation as it may not be possible or meaningful to the EE.  In
   this case, the EE authorizes the KGA using the shard secret
   information.

   The SignedData structure MUST be wrapped in an EnvelopedData
   structure, as specified in Section 6 of CMS [RFC5652], encrypting it
   using a newly generated symmetric content-encryption key.

   This content-encryption key MUST be securely provided as part of the
   EnvelopedData structure to the EE using one of three key management
   techniques.  The choice of the key management technique to be used by
   the PKI management entity depends on the authentication mechanism the
   EE chose to protect the request message.  See Section 2.7 of CMP
   Updates [RFC9480] for details on which key management technique to
   use.

   *  Signature-based protection of the request message:

      In this case, the choice depends on the type of public key in the
      CMP protection certificate used by the EE in its request.

      -  The content-encryption key SHALL be protected using the key
         transport key management technique (see Section 4.1.6.1) if the
         key type supports this.

      -  The content-encryption key SHALL be protected using the key
         agreement key management technique (see Section 4.1.6.2) if the
         key type supports this.

   *  MAC-based protection of the request message:

      -  The content-encryption key SHALL be protected using the
         password-based key management technique (see Section 4.1.6.3)
         if and only if the EE used MAC-based protection for the request
         message.

   Specific prerequisites augmenting those of the respective certificate
   enrollment PKI management operations are as follows:

   *  If signature-based protection is used, the EE MUST be able to
      authenticate and authorize the KGA using suitable information,
      which includes a trust anchor.

   *  If MAC-based protection is used, the KGA MUST also know the shared
      secret information to protect the encrypted transport of the newly
      generated key pair.  Consequently, the EE can also authorize the
      KGA.

   *  The PKI management entity MUST have a certificate containing the
      additional extended key usage extension id-kp-cmKGA for signing
      the SignedData structure containing the private key package.

   *  For encrypting the SignedData structure, a fresh content-
      encryption key to be used by the symmetric encryption algorithm
      MUST be generated with sufficient entropy.

      Note: The security strength of the protection of the generated
      private key should be similar or higher than the security strength
      of the generated private key.

   Detailed Description of the privateKey Field:

           privateKey            REQUIRED
       -- MUST be an EnvelopedData structure, as specified in
       --   Section 6 of CMS [RFC5652]
             version             REQUIRED
       -- MUST be 2 for recipientInfo type KeyAgreeRecipientInfo and
       --   KeyTransRecipientInfo
       -- MUST be 0 for recipientInfo type PasswordRecipientInfo
             recipientInfos      REQUIRED
       -- MUST contain a sequence of one RecipientInfo, which MUST be
       --   ktri of type KeyTransRecipientInfo (see Section 4.1.6.1),
       --   kari of type KeyAgreeRecipientInfo (see Section 4.1.6.2), or
       --   pwri of type PasswordRecipientInfo (see Section 4.1.6.3)
             encryptedContentInfo
                                 REQUIRED
               contentType       REQUIRED
       -- MUST be id-signedData
               contentEncryptionAlgorithm
                                 REQUIRED
       -- MUST be the algorithm identifier of the algorithm used for
       --   content encryption
       -- The algorithm type MUST be PROT_SYM_ALG as specified in
       --   [RFC9481], Section 5
               encryptedContent  REQUIRED
       -- MUST be the SignedData structure, as specified in Section 5
       -- of CMS [RFC5652] and [RFC8933], in encrypted form
                 version         REQUIRED
       -- MUST be 3
                 digestAlgorithms
                                 REQUIRED
       -- MUST contain a sequence of one AlgorithmIdentifier element
       -- MUST be the algorithm identifier of the digest algorithm
       --   used for generating the signature and match the signature
       --   algorithm specified in signatureAlgorithm; see [RFC8933]
                 encapContentInfo
                                 REQUIRED
       -- MUST contain the content that is to be signed
                   eContentType  REQUIRED
       -- MUST be id-ct-KP-aKeyPackage as specified in [RFC5958]
                   eContent      REQUIRED
       -- MUST be of type AsymmetricKeyPackage and
       -- MUST contain a sequence of one OneAsymmetricKey element
                     version     REQUIRED
       -- MUST be 1 (indicating v2)
                     privateKeyAlgorithm
                                 REQUIRED
       -- The privateKeyAlgorithm field MUST contain the algorithm
       --   identifier of the asymmetric key pair algorithm
                     privateKey  REQUIRED
                     publicKey   REQUIRED
       -- MUST contain the public key corresponding to the private key
       --   for simplicity and consistency with v2 of OneAsymmetricKey
                 certificates    REQUIRED
       -- MUST contain the certificate for the private key used to sign
       --   the signedData content, together with its chain
       -- The first certificate in this field MUST be the KGA
       --   certificate used for protecting this content
       -- Self-signed certificates should not be included and MUST NOT
       --   be trusted based on their inclusion in any case
                   signerInfos   REQUIRED
       -- MUST contain a sequence of one SignerInfo element
                   version       REQUIRED
       -- MUST be 3
                   sid           REQUIRED
                     subjectKeyIdentifier
                                 REQUIRED
       -- MUST be the subjectKeyIdentifier of the KGA certificate
                   digestAlgorithm
                                 REQUIRED
       -- MUST be the same as in the digestAlgorithms field of
       --   encryptedContent
                   signedAttrs   REQUIRED
       -- MUST contain an id-contentType attribute containing the value
       --   id-ct-KP-aKeyPackage
       -- MUST contain an id-messageDigest attribute containing the
       --   message digest of eContent
       -- MAY contain an id-signingTime attribute containing the time
       --   of a signature.  It SHOULD be omitted if the transactionTime
       --   field is not present in the PKIHeader.
       -- For details on the signed attributes, see Sections 5.3 and
       --   11 of CMS [RFC5652] and [RFC8933]
                   signatureAlgorithm
                                 REQUIRED
       -- MUST be the algorithm identifier of the signature algorithm
       --   used for calculation of the signature bits
       -- The signature algorithm type MUST be MSG_SIG_ALG, as
       --   specified in [RFC9481], Section 3, and MUST be consistent
       --   with the subjectPublicKeyInfo field of the KGA certificate
                   signature     REQUIRED
       -- MUST be the digital signature of the encapContentInfo

   As stated in Section 1.8, all fields of the ASN.1 syntax that are
   defined in [RFC5652] but are not explicitly specified here SHOULD NOT
   be used.

4.1.6.1.  Using the Key Transport Key Management Technique

   This variant can be applied in combination with the PKI management
   operations specified in Sections 4.1.1 to 4.1.3 using signature-based
   protection of CMP messages.  The EE certificate used for the
   signature-based protection of the request message MUST contain a
   public key supporting key transport and allow for the key usage
   "keyEncipherment".  The related key pair MUST be used for
   encipherment of the content-encryption key.  For this key management
   technique, the KeyTransRecipientInfo structure MUST be used in the
   contentInfo field.

   The KeyTransRecipientInfo structure included into the EnvelopedData
   structure is specified in Section 6.2.1 of CMS [RFC5652].

   Detailed Description of the KeyTransRecipientInfo Structure:

               ktri              REQUIRED
       -- MUST be KeyTransRecipientInfo as specified in Section 6.2.1
       --   of CMS [RFC5652]
                 version         REQUIRED
       -- MUST be 2
                 rid             REQUIRED
       -- MUST contain the subjectKeyIdentifier of the CMP protection
       --   certificate, if available, in the rKeyId choice, and the
       --   subjectKeyIdentifier MUST equal the senderKID in the
       --   PKIHeader.
       -- If the CMP protection certificate does not contain a
       --   subjectKeyIdentifier, the issuerAndSerialNumber choice MUST
       --   be used.
                 keyEncryptionAlgorithm
                                 REQUIRED
       -- MUST be the algorithm identifier of the key transport
       --   algorithm.  The algorithm type MUST be KM_KT_ALG as
       --   specified in [RFC9481], Section 4.2
                 encryptedKey    REQUIRED
       -- MUST be the encrypted content-encryption key

4.1.6.2.  Using the Key Agreement Key Management Technique

   This variant can be applied in combination with the PKI management
   operations specified in Sections 4.1.1 to 4.1.3, using signature-
   based protection of CMP messages.  The EE certificate used for the
   signature-based protection of the request message MUST contain a
   public key supporting key agreement and allow for the key usage
   "keyAgreement".  The related key pair MUST be used for establishment
   of the content-encryption key.  For this key management technique,
   the KeyAgreeRecipientInfo structure MUST be used in the contentInfo
   field.

   The KeyAgreeRecipientInfo structure included into the EnvelopedData
   structure is specified in Section 6.2.2 of CMS [RFC5652].

   Detailed Description of the KeyAgreeRecipientInfo Structure:

               kari              REQUIRED
       -- MUST be KeyAgreeRecipientInfo as specified in Section
       --   6.2.2 of CMS [RFC5652]
                 version         REQUIRED
       -- MUST be 3
                 originator      REQUIRED
       -- MUST contain the subjectKeyIdentifier of the CMP protection
       --   certificate, if available, in the subjectKeyIdentifier
       --   choice, and the subjectKeyIdentifier MUST equal the
       --   senderKID in the PKIHeader.
       -- If the CMP protection certificate does not contain a
       --   subjectKeyIdentifier, the issuerAndSerialNumber choice MUST
       --   be used.
                 ukm             RECOMMENDED
       -- MUST be used when 1-Pass Elliptic Curve Menezes-Qu-Vanstone
       --   (ECMQV) is used; see [RFC5753]
       -- SHOULD be present to ensure uniqueness of the key
       --   encryption key
                 keyEncryptionAlgorithm
                                 REQUIRED
       -- MUST be the algorithm identifier of the key agreement
       --   algorithm
       -- The algorithm type MUST be KM_KA_ALG as specified in
       --   [RFC9481], Section 4.1
       -- The parameters field of the key agreement algorithm MUST
       --   contain the key wrap algorithm.  The algorithm type
       --   MUST be KM_KW_ALG as specified in [RFC9481], Section 4.3
                 recipientEncryptedKeys
                                 REQUIRED
       -- MUST contain a sequence of one RecipientEncryptedKey
                   rid           REQUIRED
       -- MUST contain the subjectKeyIdentifier of the CMP protection
       --   certificate, if available, in the rKeyId choice, and the
       --   subjectKeyIdentifier MUST equal the senderKID in the
       --   PKIHeader.
       -- If the CMP protection certificate does not contain a
       --   subjectKeyIdentifier, the issuerAndSerialNumber choice MUST
       --   be used
                     encryptedKey
                                 REQUIRED
       -- MUST be the encrypted content-encryption key

4.1.6.3.  Using the Password-Based Key Management Technique

   This variant can be applied in combination with the PKI management
   operation specified in Section 4.1.5, using MAC-based protection of
   CMP messages.  The shared secret information used for the MAC-based
   protection MUST also be used for the encryption of the content-
   encryption key but with a different salt value applied in the key
   derivation algorithm.  For this key management technique, the
   PasswordRecipientInfo structure MUST be used in the contentInfo
   field.

   Note: The entropy of the shared secret information is crucial for the
   level of protection when using a password-based key management
   technique.  For centrally generated key pairs, the entropy of the
   shared secret information SHALL NOT be less than the security
   strength of the centrally generated key pair.  Further guidance is
   available in Section 9.

   The PasswordRecipientInfo structure included into the EnvelopedData
   structure is specified in Section 6.2.4 of CMS [RFC5652].

   Detailed Description of the PasswordRecipientInfo Structure:

               pwri              REQUIRED
       -- MUST be PasswordRecipientInfo as specified in
       --   Section 6.2.4 of CMS [RFC5652]
                 version         REQUIRED
       -- MUST be 0
                 keyDerivationAlgorithm
                                 REQUIRED
       -- MUST be the algorithm identifier of the key derivation
       --   algorithm
       -- The algorithm type MUST be KM_KD_ALG as specified in
       --   [RFC9481], Section 4.4
                 keyEncryptionAlgorithm
                                 REQUIRED
       -- MUST be the algorithm identifier of the key wrap algorithm
       -- The algorithm type MUST be KM_KW_ALG as specified in
       --   [RFC9481], Section 4.3
                 encryptedKey    REQUIRED
       -- MUST be the encrypted content-encryption key

4.2.  Revoking a Certificate

   This PKI management operation should be used by an entity to request
   revocation of a certificate.  Here, the revocation request is used by
   an EE to revoke one of its own certificates.

   The revocation request message MUST be signed using the certificate
   that is to be revoked to prove the authorization to revoke.  The
   revocation request message is signature-protected using this
   certificate.  This requires that the EE still possesses the private
   key.  If this is not the case, the revocation has to be initiated by
   other means, e.g., revocation by the RA, as specified in
   Section 5.3.2.

   An EE requests revoking a certificate of its own at the CA that
   issued this certificate.  The PKI management entity handles the
   request as described in Section 5.1.3, and responds with a message
   that contains the status of the revocation from the CA.

   The specific prerequisite augmenting the prerequisites in Section 3.4
   is as follows:

   *  The certificate the EE wishes to revoke is not yet expired or
      revoked.

   Message Flow:

   Step# EE                                  PKI management entity
    1   format rr
    2                      ->   rr      ->
    3                                        handle or forward rr
    4                                        format or receive rp
    5                      <-   rp      <-
    6   handle rp

   For this PKI management operation, the EE MUST include a sequence of
   one RevDetails structure in the rr message body.  In the case no
   generic error occurred, the response to the rr MUST be an rp message
   containing a single status field.

   Detailed Message Description:

   Revocation Request -- rr

   Field                         Value

   header
       -- As described in Section 3.1

   body
       -- The request of the EE to revoke its certificate
     rr                          REQUIRED
       -- MUST contain a sequence of one element of type RevDetails
       -- If more revocations are desired, further PKI management
       --   operations need to be initiated
       certDetails               REQUIRED
       -- MUST be present and is of type CertTemplate
         serialNumber            REQUIRED
       -- MUST contain the certificate serialNumber attribute of the
       --   certificate to be revoked
         issuer                  REQUIRED
       -- MUST contain the issuer attribute of the certificate to be
       --   revoked
       crlEntryDetails           REQUIRED
       -- MUST contain a sequence of one reasonCode of type CRLReason
       --   (see [RFC5280], Section 5.3.1)
       -- If the reason for this revocation is not known or shall not
       --   be published, the reasonCode MUST be 0 (unspecified)
   protection                    REQUIRED
       -- As described in Section 3.2 and using the private key related
       --   to the certificate to be revoked

   extraCerts                    REQUIRED
       -- As described in Section 3.3


   Revocation Response -- rp

   Field                         Value

   header
       -- As described in Section 3.1

   body
       -- The response of the PKI management entity to the request as
       --   appropriate
     rp                          REQUIRED
       status                    REQUIRED
       -- MUST contain a sequence of one element of type PKIStatusInfo
         status                  REQUIRED
       -- positive value allowed: "accepted"
       -- negative value allowed: "rejection"
         statusString            OPTIONAL
       -- MAY be any human-readable text for debugging, for logging, or
       --   to display in a GUI
         failInfo                OPTIONAL
       -- MAY be present if the status is "rejection"
       -- MUST be absent if the status is "accepted"

   protection                    REQUIRED
       -- As described in Section 3.2

   extraCerts                    REQUIRED
       -- As described in Section 3.3

4.3.  Support Messages

   The following support messages offer on-demand, in-band delivery of
   content relevant to the EE provided by a PKI management entity.  CMP
   general messages and general response are used for this purpose.
   Depending on the environment, these requests may be answered by an RA
   or CA (see also Section 5.1.4).

   The general messages and general response messages contain
   InfoTypeAndValue structures.  In addition to those infoType values
   defined in [RFC4210] and CMP Updates [RFC9480], further OIDs MAY be
   used to define new PKI management operations or new general-purpose
   support messages as needed in specific environments.

   The following contents are specified in this document:

   *  Get CA certificates.

   *  Get root CA certificate update.

   *  Get certificate request template.

   *  Get new Certificate Revocation Lists (CRLs).

   The following message flow and contents are common to all general
   message (genm) and general response (genp) messages.

   Message Flow:

   Step# EE                                   PKI management entity
    1   format genm
    2                      ->   genm    ->
    3                                        handle or forward genm
    4                                        format or receive genp
    5                      <-   genp    <-
    6   handle genp

   Detailed Message Description:

   General Message -- genm

   Field                         Value

   header
       -- As described in Section 3.1

   body
       -- A request by the EE for information
     genm                        REQUIRED
       -- MUST contain a sequence of one element of type
       --   InfoTypeAndValue
       infoType                  REQUIRED
       -- MUST be the OID identifying one of the specific PKI
       --   management operations described below
       infoValue                 OPTIONAL
       -- MUST be as specified for the specific PKI management operation

   protection                    REQUIRED
       -- As described in Section 3.2

   extraCerts                    REQUIRED
       -- As described in Section 3.3


   General Response -- genp

   Field                         Value

   header
       -- As described in Section 3.1

   body
       -- The response of the PKI management entity providing
       --   information
     genp                        REQUIRED
       -- MUST contain a sequence of one element of type
       --   InfoTypeAndValue
       infoType                  REQUIRED
       -- MUST be the OID identifying the specific PKI management
       --   operation described below
       infoValue                 OPTIONAL
       -- MUST be as specified for the specific PKI management operation

   protection                    REQUIRED
       -- As described in Section 3.2

   extraCerts                    REQUIRED
       -- As described in Section 3.3

4.3.1.  Get CA Certificates

   This PKI management operation can be used by an EE to request CA
   certificates from the PKI management entity.

   An EE requests CA certificates, e.g., for chain construction, from a
   PKI management entity by sending a general message with OID id-it-
   caCerts, as specified in Section 2.14 of CMP Updates [RFC9480].  The
   PKI management entity responds with a general response with the same
   OID that either contains a SEQUENCE of certificates populated with
   the available intermediate and issuing CA certificates or no content
   in case no CA certificate is available.

   No specific prerequisites apply in addition to those specified in
   Section 3.4.

   The message sequence for this PKI management operation is as given
   above, with the following specific content:

   1.  the infoType OID to use is id-it-caCerts

   2.  the infoValue of the request MUST be absent

   3.  if present, the infoValue of the response MUST contain a sequence
       of certificates

   Detailed Description of the infoValue Field of genp:

         infoValue               OPTIONAL
       -- MUST be absent if no CA certificate is available
       -- MUST be present if CA certificates are available
       --   if present, MUST be a sequence of CMPCertificate

4.3.2.  Get Root CA Certificate Update

   This PKI management operation can be used by an EE to request an
   updated root CA certificate as described in Section 4.4 of [RFC4210].

   An EE requests an update of a root CA certificate from the PKI
   management entity by sending a general message with OID id-it-
   rootCaCert.  If needed for unique identification, the EE MUST include
   the old root CA certificate in the message body as specified in
   Section 2.15 of CMP Updates [RFC9480].  The PKI management entity
   responds with a general response with OID id-it-rootCaKeyUpdate that
   either contains the update of the root CA certificate consisting of
   up to three certificates or no content in case no update is
   available.

   Note: This mechanism may also be used to update trusted non-root
   certificates, e.g., directly trusted intermediate or issuing CA
   certificates.

   The newWithNew certificate is the new root CA certificate and is
   REQUIRED to be present if available.  The newWithOld certificate is
   REQUIRED to be present in the response message because it is needed
   for the receiving entity trusting the old root CA certificate to gain
   trust in the new root CA certificate.  The oldWithNew certificate is
   OPTIONAL because it is only needed in rare scenarios where other
   entities may not already trust the old root CA.

   No specific prerequisites apply in addition to those specified in
   Section 3.4.

   The message sequence for this PKI management operation is as given
   above, with the following specific content:

   1.  the infoType OID to use is id-it-rootCaCert in the request and
       id-it-rootCaKeyUpdate in the response

   2.  the infoValue of the request SHOULD contain the root CA
       certificate the update is requested for

   3.  if present, the infoValue of the response MUST be a
       RootCaKeyUpdateContent structure

   Detailed Description of the infoValue Field of genm:

         infoValue               RECOMMENDED
       -- MUST contain the root CA certificate to be updated if needed
       --   for unique identification

   Detailed Description of the infoValue Field of genp:

         infoValue               OPTIONAL
       -- MUST be absent if no update of the root CA certificate is
       --   available
       -- MUST be present if an update of the root CA certificate
       --   is available and MUST be of type RootCaKeyUpdateContent
           newWithNew            REQUIRED
       -- MUST be present if infoValue is present
       -- MUST contain the new root CA certificate
           newWithOld            REQUIRED
       -- MUST be present if infoValue is present
       -- MUST contain a certificate containing the new public
       --   root CA key signed with the old private root CA key
           oldWithNew            OPTIONAL
       -- MAY be present if infoValue is present
       -- MUST contain a certificate containing the old public
       --   root CA key signed with the new private root CA key

4.3.3.  Get Certificate Request Template

   This PKI management operation can be used by an EE to request a
   template with parameters for future certificate requests.

   An EE requests certificate request parameters from the PKI management
   entity by sending a general message with OID id-it-certReqTemplate as
   specified in Section 2.16 of CMP Updates [RFC9480].  The EE MAY
   indicate the certificate profile to use in the id-it-certProfile
   extension of the generalInfo field in the PKIHeader of the general
   message as described in Section 3.1.  The PKI management entity
   responds with a general response with the same OID that either
   contains requirements on the certificate request template or no
   content in case no specific requirements are imposed by the PKI.  The
   CertReqTemplateValue contains requirements on certificate fields and
   extensions in a certTemplate.  Optionally, it contains a keySpec
   field containing requirements on algorithms acceptable for key pair
   generation.

   The EE SHOULD follow the requirements from the received CertTemplate
   by including in the certificate requests all the fields requested,
   taking over all the field values provided and filling in any
   remaining fields values.  The EE SHOULD NOT add further fields, name
   components, and extensions or their (sub)components.  If deviating
   from the recommendations of the template, the certificate request
   might be rejected.

   Note: We deliberately do not use "MUST" or "MUST NOT" here in order
   to allow more flexibility in case the rules given here are not
   sufficient for specific scenarios.  The EE can populate the
   certificate request as wanted and ignore any of the requirements
   contained in the CertReqTemplateValue.  On the other hand, a PKI
   management entity is free to ignore or replace any parts of the
   content of the certificate request provided by the EE.  The
   CertReqTemplate PKI management operation offers means to ease a joint
   understanding of which fields and/or which field values should be
   used.  An example is provided in Appendix A.

   In case a field of type Name, e.g., subject, is present in the
   CertTemplate but has the value NULL-DN (i.e., has an empty list of
   relative distinguished name (RDN) components), the field SHOULD be
   included in the certificate request and filled with content provided
   by the EE.  Similarly, in case an X.509v3 extension is present but
   its extnValue is empty, this means that the extension SHOULD be
   included and filled with content provided by the EE.  In case a Name
   component, for instance, a common name or serial number, is given but
   has an empty string value, the EE SHOULD fill in a value.  Similarly,
   in case an extension has subcomponents (e.g., an IP address in a
   SubjectAltName field) with empty values, the EE SHOULD fill in a
   value.

   The EE MUST ignore (i.e., not include) empty fields, extensions, and
   subcomponents that it does not understand or does not know suitable
   values to fill in.

   The publicKey field of type SubjectPublicKeyInfo in the CertTemplate
   of the CertReqTemplateValue MUST be omitted.  In case the PKI
   management entity wishes to make a stipulation on algorithms the EE
   may use for key generation, this MUST be specified using the keySpec
   field as specified in Section 2.16 of CMP Updates [RFC9480].

   The keySpec field, if present, specifies the public key types
   optionally with parameters and/or RSA key lengths for which a
   certificate may be requested.

   The value of a keySpec element with the OID id-regCtrl-algId, as
   specified in Section 2.16 of CMP Updates [RFC9480], MUST be of type
   AlgorithmIdentifier and give an algorithm other than RSA.  For
   Elliptic Curve (EC) keys, the curve information MUST be specified as
   described in the respective standard documents.

   The value of a keySpec element with the OID id-regCtrl-rsaKeyLen, as
   specified in Section 2.16 of CMP Updates [RFC9480], MUST be a
   positive integer value and give an RSA key length.

   In the CertTemplate of the CertReqTemplateValue, the serialNumber,
   signingAlg, issuerUID, and subjectUID fields MUST be omitted.

   The specific prerequisites augmenting the prerequisites in
   Section 3.4 is as follows:

   *  When using the generalInfo field certProfile, the EE MUST know the
      identifier needed to indicate the requested certificate profile.

   The message sequence for this PKI management operation is as given
   above, with the following specific content:

   1.  the infoType OID to use is id-it-certReqTemplate

   2.  the id-it-certProfile generalInfo field in the header of the
       request MAY contain the name of the requested certificate request
       template

   3.  the infoValue of the request MUST be absent

   4.  if present, the infoValue of the response MUST be a
       CertReqTemplateValue containing a CertTemplate structure and an
       optional keySpec field

   Detailed Description of the infoValue Field of genp:

         InfoValue               OPTIONAL
       -- MUST be absent if no requirements are available
       -- MUST be present if the PKI management entity has any
       --   requirements on the contents of the certificate template
           certTemplate          REQUIRED
       -- MUST be present if infoValue is present
       -- MUST contain the required CertTemplate structure elements
       -- The SubjectPublicKeyInfo field MUST be absent
           keySpec               OPTIONAL
       -- MUST be absent if no requirements on the public key are
       --   available
       -- MUST be present if the PKI management entity has any
       --   requirements on the keys generated
       -- MUST contain a sequence of one AttributeTypeAndValue per
       --   supported algorithm with attribute id-regCtrl-algId or
       --   id-regCtrl-rsaKeyLen

4.3.4.  CRL Update Retrieval

   This PKI management operation can be used by an EE to request a new
   CRL.  If a CA offers methods to access a CRL, it may include CRL
   distribution points or authority information access extensions into
   the issued certificates as specified in [RFC5280].  In addition, CMP
   offers CRL provisioning functionality as part of the PKI management
   operation.

   An EE requests a CRL update from the PKI management entity by sending
   a general message with OID id-it-crlStatusList.  The EE MUST include
   the CRL source identifying the requested CRL and, if available, the
   thisUpdate time of the most current CRL instance it already has, as
   specified in Section 2.17 of CMP Updates [RFC9480].  The PKI
   management entity MUST respond with a general response with OID id-
   it-crls.

   The EE MUST identify the requested CRL either by a CRL distribution
   point name or issuer name.

   Note: CRL distribution point names can be obtained from a
   cRLDistributionPoints extension of a certificate to be validated or
   from an issuingDistributionPoint extension of the CRL to be updated.
   CRL issuer names can be obtained from the cRLDistributionPoints
   extension of a certificate, from the issuer field of the authority
   key identifier extension of a certificate or CRL, and from the issuer
   field of a certificate or CRL.

   If a thisUpdate value was given, the PKI management entity MUST
   return the latest CRL available from the referenced source if this
   CRL is more recent than the given thisUpdate time.  If no thisUpdate
   value was given, it MUST return the latest CRL available from the
   referenced source.  In all other cases, the infoValue in the response
   message MUST be absent.

   The PKI management entity should treat a CRL distribution point name
   as an internal pointer to identify a CRL that is directly available
   at the PKI management entity.  It is not intended as a way to fetch
   an arbitrary CRL from an external location, as this location may be
   unavailable to that PKI management entity.

   In addition to the prerequisites specified in Section 3.4, the EE
   MUST know which CRL to request.

   Note: If the EE does not want to request a specific CRL, it MAY
   instead use a general message with OID id-it-currentCrl as specified
   in Section 5.3.19.6 of [RFC4210].

   The message sequence for this PKI management operation is as given
   above, with the following specific content:

   1.  the infoType OID to use is id-it-crlStatusList in the request and
       id-it-crls in the response

   2.  the infoValue of the request MUST be present and contain a
       sequence of one CRLStatus structure

   3.  if present, the infoValue of the response MUST contain a sequence
       of one CRL

   Detailed Description of the infoValue Field of genm:

         infoValue               REQUIRED
       -- MUST contain a sequence of one CRLStatus element
           source                REQUIRED
       -- MUST contain the dpn choice of type DistributionPointName if
       --   the CRL distribution point name is available
       -- Otherwise, MUST contain the issuer choice identifying the CA
       --   that issues the CRL.  It MUST contain the issuer DN in the
       --   directoryName field of a GeneralName element.
           thisUpdate            OPTIONAL
       -- MUST contain the thisUpdate field of the latest CRL the EE
       --   has gotten from the issuer specified in the given dpn or
       --   issuer field
       -- MUST be omitted if the EE does not have any instance of the
       --   requested CRL

   Detailed Description of the infoValue Field of genp:

         infoValue               OPTIONAL
       -- MUST be absent if no CRL to be returned is available
       -- MUST contain a sequence of one CRL update from the referenced
       --   source if a thisUpdate value was not given or a more recent
       --   CRL is available

4.4.  Handling Delayed Delivery

   This is a variant of all PKI management operations described in this
   document.  It is initiated in case a PKI management entity cannot
   respond to a request message in a timely manner, typically due to
   offline or asynchronous upstream communication or due to delays in
   handling the request.  The polling mechanism has been specified in
   Section 5.3.22 of [RFC4210] and updated by [RFC9480].

   Depending on the PKI architecture, the entity initiating delayed
   delivery is not necessarily the PKI management entity directly
   addressed by the EE.

   When initiating delayed delivery of a message received from an EE,
   the PKI management entity MUST respond with a message including the
   status "waiting".  In response to an ir/cr/kur/p10cr message, it must
   place the status "waiting" in an ip/cp/kup message and for responses
   to other request message types in an error message.  On receiving
   this response, the EE MUST store in its transaction context the
   senderNonce of the preceding request message because this value will
   be needed for checking the recipNonce of the final response to be
   received after polling.  It sends a poll request with certReqId 0 if
   referring to the CertResponse element contained in the ip/cp/kup
   message, else -1 to refer to the whole message.  In case the final
   response is not yet available, the PKI management entity that
   initiated the delayed delivery MUST answer with a poll response with
   the same certReqId.  The included checkAfter time value indicates the
   minimum number of seconds that should elapse before the EE sends a
   new pollReq message to the PKI management entity.  Polling earlier
   than indicated by the checkAfter value may increase the number of
   message round trips.  This is repeated until a final response is
   available or any party involved gives up on the current PKI
   management operation, i.e., a timeout occurs.

   When the PKI management entity that initiated delayed delivery can
   provide the final response for the original request message of the
   EE, it MUST send this response to the EE.  Using this response, the
   EE can continue the current PKI management operation as usual.

   No specific prerequisites apply in addition to those of the
   respective PKI management operation.

   Message Flow:

   Step# EE                                  PKI management entity
    1   format request
          message
    2                  ->     request     ->
    3                                        handle or forward
                                               request
    4                                        format ip/cp/kup/error
                                               with status "waiting"
                                               response in case no
                                               immediate final response
                                               is available
    5                   <- ip/cp/kup/error <-
    6   handle
          ip/cp/kup/error
          with status
          "waiting"

   --------------------------  start polling  --------------------------

    7   format pollReq
    8                     ->    pollReq   ->
    9                                        handle or forward pollReq
   10                                        in case the final response
                                               for the original request
                                               is available, continue
                                               with step 14
                                             otherwise, format or
                                               receive pollRep with
                                               checkAfter value
   11                     <-    pollRep   <-
   12   handle pollRep
   13   let checkAfter
          time elapse and
          continue with
          step 7

   -----------------  end polling, continue as usual  ------------------

   14                                        format or receive
                                               final response on
                                               the original request
   15                     <-   response   <-
   16   handle final
          response

   Detailed Message Description:

   Response with Status "waiting" -- ip/cp/kup/error

   Field                         Value

   header
       -- As described in Section 3.1

   body
       -- As described for the respective PKI management operation, with
       --   the following adaptations:
         status                  REQUIRED -- in case of ip/cp/kup
         pKIStatusInfo           REQUIRED -- in case of error response
       -- PKIStatusInfo structure MUST be present
           status                REQUIRED
       -- MUST be status "waiting"
           statusString          OPTIONAL
       -- MAY be any human-readable text for debugging, for logging, or
       --   to display in a GUI
           failInfo              PROHIBITED

   protection                    REQUIRED
       -- As described in Section 3.2

   extraCerts                    OPTIONAL
       -- As described in Section 3.3


   Polling Request -- pollReq

   Field                         Value

   header
       -- As described in Section 3.1

   body
       -- The message of the EE asking for the final response or for a
       --   time to check again
     pollReq                     REQUIRED
       certReqId                 REQUIRED
       -- MUST be 0 if referring to a CertResponse element, else -1

   protection                    REQUIRED
       -- As described in Section 3.2
       -- MUST use the same credentials as in the first request message
       --   of the PKI management operation

   extraCerts                    RECOMMENDED
       -- As described in Section 3.3
       -- MAY be omitted if the message size is critical and the PKI
       --   management entity caches the CMP protection certificate from
       --   the first request message of the PKI management operation


   Polling Response -- pollRep

   Field                         Value

   header
       -- As described in Section 3.1

   body
       -- The message indicates the delay after which the EE SHOULD
       --   send another pollReq message for this transaction
     pollRep                     REQUIRED
       certReqId                 REQUIRED
       -- MUST be 0 if referring to a CertResponse element, else -1
       checkAfter                REQUIRED
       -- MUST be the time in seconds to elapse before a new pollReq
       --   should be sent
       reason                    OPTIONAL
       -- MAY be any human-readable text for debugging, for logging, or
       --   to display in a GUI

   protection                    REQUIRED
       -- As described in Section 3.2
       -- MUST use the same credentials as in the first response
       --   message of the PKI management operation

   extraCerts                    RECOMMENDED
       -- As described in Section 3.3
       -- MAY be omitted if the message size is critical and the EE has
       --   cached the CMP protection certificate from the first
       --   response message of the PKI management operation


   Final Response - Any Type of Response Message

   Field                         Value

   header
       -- MUST be the header, as described for the response message
       --   of the respective PKI management operation

   body
       -- The response of the PKI management entity to the initial
       --   request, as described in the respective PKI management
       --   operation

   protection                    REQUIRED
       -- MUST be as described for the response message of the
       --   respective PKI management operation

   extraCerts                    REQUIRED
       -- MUST be as described for the response message of the
       --   respective PKI management operation

5.  PKI Management Entity Operations

   This section focuses on request processing by a PKI management
   entity.  Depending on the network and PKI solution design, this can
   be an RA or CA, any of which may include protocol conversion or
   central key generation (i.e., acting as a KGA).

   A PKI management entity may directly respond to request messages from
   downstream and report errors.  In case the PKI management entity is
   an RA, it typically forwards the received request messages upstream
   after checking them and forwards respective response messages
   downstream.  Besides responding to messages or forwarding them, a PKI
   management entity may request or revoke certificates on behalf of
   EEs.  A PKI management entity may also need to manage its own
   certificates and thus act as an EE using the PKI management
   operations specified in Section 4.

5.1.  Responding to Requests

   The PKI management entity terminating the PKI management operation at
   CMP level MUST respond to all received requests by returning a
   related CMP response message or an error.  Any intermediate PKI
   management entity MAY respond, depending on the PKI configuration and
   policy.

   In addition to the checks described in Section 3.5, the responding
   PKI management entity MUST check that a request that initiates a new
   PKI management operation does not use a transactionID that is
   currently in use.  The failInfo bit value to use is
   transactionIdInUse as described in Section 3.6.4.  If any of these
   verification steps or any of the essential checks described in
   Section 3.5 and in the following subsections fails, the PKI
   management entity MUST proceed as described in Section 3.6.

   The responding PKI management entity MUST copy the sender field of
   the request to the recipient field of the response, MUST copy the
   senderNonce of the request to the recipNonce of the response, and
   MUST use the same transactionID for the response.

5.1.1.  Responding to a Certificate Request

   An ir/cr/kur/p10cr message is used to request a certificate as
   described in Section 4.1.  The responding PKI management entity MUST
   proceed as follows unless it initiates delayed delivery as described
   in Section 5.1.5.

   The PKI management entity MUST check the message body according to
   the applicable requirements from Section 4.1.  Possible failInfo bit
   values used for error reporting in case a check failed include
   badCertId and badCertTemplate.  It MUST verify the presence and value
   of the proof-of-possession (failInfo bit: badPOP) unless central key
   generation is requested.  If a signature-based proof-of-possession is
   present, the PKI management entity MUST verify, based on local PKI
   policy, that the subject name in the certTemplate identifies the same
   entity as the subject name in the CMP protection certificate or
   matches the identifier used with MAC-based protection.  In case this
   verification fails, the message MUST have been protected by an
   authorized PKI management entity (failInfo bit: notAuthorized).  If
   the special POP value "raVerified" is given, the PKI management
   entity should check that the request message was signed using a
   certificate containing the cmcRA extended key usage (failInfo bit:
   notAuthorized).  The PKI management entity should also perform any
   further checks on the certTemplate contents (failInfo:
   badCertTemplate) according to any applicable PKI policy and
   certificate profile.

   If the requested certificate is available, the PKI management entity
   MUST respond with a positive ip/cp/kup message as described in
   Section 4.1.

   Note: If central key generation is performed by the responding PKI
   management entity, the responding PKI management entity MUST include
   the private key in encrypted form in the response as specified in
   Section 4.1.6.

   The prerequisites of the respective PKI management operation
   specified in Section 4.1 apply.

   If the EE requested omission of the certConf message, the PKI
   management entity MUST handle it as described in Section 4.1.1.
   Therefore, it MAY grant this by including the implicitConfirm
   generalInfo field or including the confirmWaitTime field in the
   response header.

5.1.2.  Responding to a Confirmation Message

   A PKI management entity MUST handle a certConf message if it has
   responded before with a positive ip/cp/kup message not granting
   implicit confirmation.  It should check the message body according to
   the requirements given in Section 4.1.1 (failInfo bit: badCertId) and
   MUST react as described there.

   The prerequisites of the respective PKI management operation
   specified in Section 4.1 apply.

5.1.3.  Responding to a Revocation Request

   An rr message is used to request revocation of a certificate.  The
   responding PKI management entity should check the message body
   according to the requirements in Section 4.2.  It MUST make sure that
   the referenced certificate exists (failInfo bit: badCertId), has been
   issued by the addressed CA, and is not already expired or revoked
   (failInfo bit: certRevoked).  On success, it MUST respond with a
   positive rp message, as described in Section 4.2.

   No specific prerequisites apply in addition to those specified in
   Section 3.4.

5.1.4.  Responding to a Support Message

   A genm message is used to retrieve extra content.  The responding PKI
   management entity should check the message body according to the
   applicable requirements in Section 4.3 and perform any further checks
   depending on the PKI policy.  On success, it MUST respond with a genp
   message as described there.

   Note: The responding PKI management entity may generate the response
   from scratch or reuse the contents of previous responses.  Therefore,
   it may be worth caching the body of the response message as long as
   the contained information is valid and current, such that further
   requests for the same contents can be answered immediately.

   No specific prerequisites apply in addition to those specified in
   Section 3.4.

5.1.5.  Initiating Delayed Delivery

   This functional extension can be used by a PKI management entity in
   case the response to a request takes longer than usual.  In this
   case, the PKI management entity should completely validate the
   request as usual and then start processing the request itself or
   forward it further upstream as soon as possible.  In the meantime, it
   MUST respond with an ip/cp/kup/error message including the status
   "waiting" and handle subsequent polling as described in Section 4.4.

   Typically, as stated in Section 5.2.3, an intermediate PKI management
   entity should not change the sender and recipient nonces even in case
   it modifies a request or a response message.  In the special case of
   delayed delivery initiated by an intermediate PKI management entity,
   there is an exception.  Between the EE and this PKI management
   entity, pollReq and pollRep messages are exchanged handling the
   nonces as usual.  Yet when the final response from upstream has
   arrived at the PKI management entity, this response contains the
   recipNonce copied (as usual) from the senderNonce in the original
   request message.  The PKI management entity that initiated the
   delayed delivery MAY replace the recipNonce in the response message
   with the senderNonce of the last received pollReq because the
   downstream entities, including the EE, might expect it in this way.
   Yet the check specified in Section 3.5 allows alternate use of the
   senderNonce of the original request.

   No specific prerequisites apply in addition to those of the
   respective PKI management operation.

5.2.  Forwarding Messages

   In case the PKI solution consists of intermediate PKI management
   entities (i.e., LRA or RA), each CMP request message coming from an
   EE or any other downstream PKI management entity MUST either be
   forwarded to the next (upstream) PKI management entity as described
   in this section, or answered as described in Section 5.1.  Any
   received response message or a locally generated error message MUST
   be forwarded to the next (downstream) PKI entity.

   In addition to the checks described in Section 3.5, the forwarding
   PKI management entity MAY verify the proof-of-possession for
   ir/cr/kur/p10cr messages.  If one of these verification procedures
   fails, the RA proceeds as described in Section 3.6.

   A PKI management entity SHOULD NOT change the received message unless
   its role in the PKI system requires it.  This is because changes to
   the message header or body imply reprotection.  Changes to the
   protection breaks end-to-end authentication of the message source.
   Changes to the certificate template in a certificate request breaks
   proof-of-possession.  More details are available in the following
   subsections.  Concrete PKI system specifications may define when to
   do so in more detail.

   This is particularly relevant in the upstream communication of a
   request message.

   Each forwarding PKI management entity has one or more
   functionalities.  It may:

   *  verify the identities of EEs and make authorization decisions for
      certification request processing based on local PKI policy,

   *  add or modify fields of certificate request messages,

   *  replace a MAC-based protection with a signature-based protection
      that can also be verified further upstream and vice versa,

   *  double-check if the messages transferred back and forth are
      properly protected and well-formed,

   *  provide an authentic indication that it has performed all required
      checks,

   *  initiate a delayed delivery due to delays transferring messages or
      handling requests, or

   *  collect messages from multiple RAs and forward them jointly.

   Note: PKI management entities forwarding messages may also store data
   from a message in a database for later usage or audit purposes.  They
   may also support traversal of a network boundary.

   The decision if a message should be forwarded is:

   *  unchanged with the original protection,

   *  unchanged with an additional protection, or

   *  changed with an additional protection

   depending on the PKI solution design and the associated security
   policy, e.g., as defined in the certificate policy (CP) /
   certification practice statement (CPS) documents [RFC3647].

   A PKI management entity SHOULD add or MAY replace a protection of a
   message if it

   *  needs to securely indicate that it has done checks or validations
      on the message to one of the next (upstream) PKI management
      entities or

   *  needs to protect the message using a key and certificate from a
      different PKI.

   If retaining end-to-end message authentication is required, an
   additional protection SHALL be added instead of replacing the
   original protection.

   A PKI management entity MUST replace a protection of a message if it

   *  performs changes to the header or the body of the message or

   *  needs to convert from or to a MAC-based protection.

   This is particularly relevant in the upstream communication of
   certificate request messages.

   Note that the message protection covers only the header and the body
   and not the extraCerts.  The PKI management entity MAY change the
   extraCerts in any of the following message adaptations, e.g., to
   sort, add, or delete certificates to support subsequent PKI entities.
   This may be particularly helpful to augment upstream messages with
   additional certificates or to reduce the number of certificates in
   downstream messages when forwarding to constrained devices.

5.2.1.  Not Changing Protection

   This variant means that a PKI management entity forwards a CMP
   message without changing the header, body, or protection.  In this
   case, the PKI management entity acts more like a proxy, e.g., on a
   network boundary, implementing no specific RA-like security
   functionality that requires an authentic indication to the PKI.
   Still, the PKI management entity might implement checks that result
   in refusing to forward the request message and instead responding as
   specified in Section 3.6.

   This variant of forwarding a message or the one described in
   Section 5.2.2.1 MUST be used for kur messages and for central key
   generation.

   No specific prerequisites apply in addition to those specified in
   Section 3.4.

5.2.2.  Adding Protection and Batching of Messages

   This variant of forwarding a message means that a PKI management
   entity adds another protection to PKI management messages before
   forwarding them.

   The nested message is a PKI management message containing a
   PKIMessages sequence as its body, containing one or more CMP
   messages.

   As specified in the updated Section 5.1.3.4 of [RFC4210] (also see
   Section 2.6 of CMP Updates [RFC9480]), there are various use cases
   for adding another protection by a PKI management entity.  Specific
   procedures are described in more detail in the following sections.

   Detailed Message Description:

   Nested Message - nested

   Field                         Value

   header
       -- As described in Section 3.1

   body
       -- Container to provide additional protection to original
       --   messages and to bundle request messages or alternatively
       --   response messages
     PKIMessages                 REQUIRED
       -- MUST be a sequence of one or more CMP messages

   protection                    REQUIRED
       -- As described in Section 3.2, using the CMP protection key of
       --   the PKI management entity

   extraCerts                    REQUIRED
       -- As described in Section 3.3

5.2.2.1.  Adding Protection to a Request Message

   This variant means that a PKI management entity forwards a CMP
   message while authentically indicating successful validation and
   approval of a request message without changing the original message
   authentication.

   By adding a protection using its own CMP protection key, the PKI
   management entity provides a proof of verifying and approving the
   message, as described above.  Thus, the PKI management entity acts as
   an actual registration authority (RA), which implements important
   security functionality of the PKI.  Applying an additional protection
   is specifically relevant when forwarding a message that requests a
   certificate update or central key generation.  This is because the
   original protection of the EE needs to be preserved while adding an
   indication of approval by the PKI management entity.

   The PKI management entity wrapping the original request message in a
   nested message structure MUST copy the values of the senderNonce and
   transactionID header fields of the original message to the respective
   header fields of the nested message and apply signature-based
   protection.  The additional signature serves as proof of verification
   and authorization by this PKI management entity.

   The PKI management entity receiving such a nested message that
   contains a single request message MUST validate the additional
   protection signature on the nested message and check the
   authorization for the approval it implies.  Other fields in the
   header of the nested message can be ignored.

   The PKI management entity responding to the request contained in the
   nested message sends the response message as described in
   Section 5.1, without wrapping it in a nested message.

   Note: When responding to the inner request message, it must be
   considered that the verification and approval activity described in
   this section has already been performed by the PKI management entity
   that protected the nested message.

   Note: This form of nesting messages is characterized by the fact that
   the transactionID in the header of the nested message is the same as
   the one used in the included message.

   The specific prerequisite augmenting the prerequisites in Section 3.4
   is as follows:

   *  The PKI management entity MUST be able to validate the respective
      request and have the authorization to perform approval of the
      request according to the PKI policies.

   Message Flow:

   Step# PKI management entity               PKI management entity
    1   format nested
    2                      ->  nested   ->
    3                                        handle or forward nested
    4                                        format or receive response
    5                      <-  response <-
    6   forward response

5.2.2.2.  Batching Messages

   A PKI management entity MAY bundle any number of PKI management
   messages for batch processing or to transfer a bulk of PKI management
   messages using the nested message structure.  In this use case,
   nested messages are used both on the upstream interface for
   transferring request messages towards the next PKI management entity
   and on its downstream interface for response messages.

   This PKI management operation is typically used on the interface
   between an LRA and an RA to bundle several messages for offline or
   asynchronous delivery.  In this case, the LRA needs to initiate
   delayed delivery, as described in Section 5.1.5.  If the RA needs
   different routing information per the nested PKI management message
   provided upstream, a suitable mechanism may need to be implemented to
   ensure that the downstream delivery of the response is done to the
   right requester.  Since this mechanism strongly depends on the
   requirements of the target architecture, it is out of scope of this
   document.

   A nested message containing requests is generated locally at the PKI
   management entity.  For the upstream nested message, the PKI
   management entity acts as a protocol endpoint; therefore, a fresh
   transactionID and a fresh senderNonce MUST be used in the header of
   the nested message.  An upstream nested message may contain request
   messages, e.g., ir, cr, p10cr, kur, pollReq, certConf, rr, or genm.
   While building the upstream nested message, the PKI management entity
   must store the sender, transactionID, and senderNonce fields of all
   bundled messages together with the transactionID of the upstream
   nested message.

   Such an upstream nested message is sent to the next PKI management
   entity.  The upstream PKI management entity that unbundles it MUST
   handle each of the included request messages as usual.  It MUST
   answer with a downstream nested message.  This downstream nested
   message MUST use the transactionID of the upstream nested message and
   return the senderNonce of the upstream nested message as the
   recipNonce of the downstream nested message.  The downstream nested
   message MUST bundle all available individual response messages (e.g.,
   ip, cp, kup, pollRep, pkiConf, rp, genp, or error) for all original
   request messages of the upstream nested message.  While unbundling
   the downstream nested message, the former PKI management entity must
   determine lost and unexpected responses based on the previously
   stored transactionIDs.  When it forwards the unbundled responses, any
   extra messages MUST be dropped, and any missing response message MUST
   be answered with an error message (failInfo bit: systemUnavail) to
   inform the respective requester about the failed certificate
   management operation.

   Note: This form of nesting messages is characterized by the fact that
   the transactionID in the header of the nested message is different to
   those used in the included messages.

   The protection of the nested messages MUST NOT be regarded as an
   indication of verification or approval of the bundled PKI request
   messages.

   No specific prerequisites apply in addition to those specified in
   Section 3.4.

   Message Flow:

   Step# PKI management entity               PKI management entity
    1   format nested
    2                      ->  nested   ->
    3                                        handle or forward nested
    4                                        format or receive nested
    5                      <-  nested   <-
    6   handle nested

5.2.3.  Replacing Protection

   The following two alternatives can be used by any PKI management
   entity forwarding a CMP message with or without changes while
   providing its own protection and, in this way, asserting approval of
   the message.

   If retaining end-to-end message authentication is required, an
   additional protection SHALL be added instead of replacing the
   original protection.

   By replacing the existing protection using its own CMP protection
   key, the PKI management entity provides a proof of verifying and
   approving the message as described above.  Thus, the PKI management
   entity acts as an actual registration authority (RA), which
   implements important security functionality of the PKI such as
   verifying the proof of requester identity and authorization.

   Note: By replacing the message protection, the binding of a
   signature-based proof-of-possession to the proof-of-identity given by
   the original message protection gets lost.  To enable the CA to
   verify this binding, the original message can be provided in the
   origPKIMessage generalInfo field.

   Before replacing the existing protection with a new protection, the
   PKI management entity:

   *  MUST validate the protection of the received message,

   *  should check the content of the message,

   *  may do any modifications that it wants to perform, and

   *  MUST check that the sender of the original message, as
      authenticated by the message protection, is authorized for the
      given operation.

   *  for certificate requests, MUST verify the binding of signature-
      based proof-of-possession to the proof-of-identity as described in
      Section 5.1.1.

   These message adaptations MUST NOT be applied to kur messages
   described in Section 4.1.3 since their original protection using the
   key and certificate to be updated needs to be preserved.

   These message adaptations MUST NOT be applied to certificate request
   messages described in Section 4.1.6 for central key generation since
   their original protection needs to be preserved up to the KGA, which
   needs to use it for encrypting the new private key for the EE.

   In both the kur and central key generation cases, if a PKI management
   entity needs to state its approval of the original request message,
   it MUST provide this using a nested message as specified in
   Section 5.2.2.1.

   When an intermediate PKI management entity modifies a message, it
   MUST NOT change the transactionID, the senderNonce, or the
   recipNonce, apart from the exception for the recipNonce given in
   Section 5.1.5.

5.2.3.1.  Not Changing Proof-of-Possession

   This variant of forwarding a message means that a PKI management
   entity forwards a CMP message with or without modifying the message
   header or body while preserving any included proof-of-possession.

   This variant is typically used when an RA replaces an existing MAC-
   based protection with its own signature-based protection; because the
   upstream PKI management entity does not know the respective shared
   secret information, replacing the protection is useful.

   Note: A signature-based proof-of-possession of a certificate request
   will be broken if any field in the certTemplate structure is changed.

   In case the PKI management entity breaks an existing proof-of-
   possession, the message adaptation described in Section 5.2.3.2 needs
   to be applied instead.

   The specific prerequisite augmenting the prerequisites in Section 3.4
   is as follows:

   *  The PKI management entity MUST be able to validate the respective
      request and have the authorization to perform approval of the
      request according to the PKI policies.

5.2.3.2.  Using raVerified

   This variant of forwarding a message needs to be used if a PKI
   management entity breaks any included proof-of-possession in a
   certificate request message, for instance, because it forwards an ir
   or cr message with modifications of the certTemplate, i.e.,
   modification, addition, or removal of fields.

   The PKI management entity MUST verify the proof-of-possession
   contained in the original message using the included public key.  If
   successful, the PKI management entity MUST change the popo field
   value to raVerified.

   Specific prerequisites augmenting the prerequisites in Section 3.4
   are as follows:

   *  The PKI management entity MUST be authorized to replace the proof-
      of-possession (after verifying it) with raVerified.

   *  The PKI management entity MUST be able to validate the respective
      request and have the authorization to perform approval of the
      request according to the PKI policies.

   Detailed Description of the popo Field of the certReq Structure:

       popo
         raVerified              REQUIRED
       -- MUST have the value NULL and indicates that the PKI
       --   management entity verified the popo of the original message

5.3.  Acting on Behalf of Other PKI Entities

   A PKI management entity may need to request a PKI management
   operation on behalf of another PKI entity.  In this case, the PKI
   management entity initiates the respective PKI management operation
   as described in Section 4, acting in the role of the EE.

   Note: The request message protection will not authenticate the EE,
   but it will authenticate the RA acting on behalf of the EE.

5.3.1.  Requesting a Certificate

   A PKI management entity may use one of the PKI management operations
   described in Section 4.1 to request a certificate on behalf of
   another PKI entity.  It either generates the key pair itself and
   inserts the new public key in the subjectPublicKey field of the
   request certTemplate, or it uses a certificate request received from
   downstream, e.g., by means of a different protocol.  In the latter
   case, it MUST verify the received proof-of-possession if this proof
   breaks, e.g., due to transformation from PKCS #10 [RFC2986] to CRMF
   [RFC4211].  It MUST also verify, based on local PKI policy, that the
   subject name in the certTemplate identifies the EE.

   No specific prerequisites apply in addition to those specified in
   Section 4.1.

   Note: An upstream PKI management entity will not be able to
   differentiate this PKI management operation from the one described in
   Section 5.2.3 because, in both cases, the message is protected by the
   PKI management entity.

   The message sequence for this PKI management operation is identical
   to the respective PKI management operation given in Section 4.1, with
   the following changes:

   1.  The request messages MUST be signed using the CMP protection key
       of the PKI management entity taking the role of the EE in this
       operation.

   2.  If inclusion of a proper proof-of-possession is not possible, the
       PKI management entity MUST verify the POP provided from
       downstream and use "raVerified" in its upstream request.

   3.  The binding of the proof-of-possession to the proof-of-identity
       of the requesting EE cannot be provided when acting on behalf of
       the EE.

5.3.2.  Revoking a Certificate

   A PKI management entity may use the PKI management operation
   described in Section 4.2 to revoke a certificate of another PKI
   entity.  This revocation request message MUST be signed by the PKI
   management entity using its own CMP protection key to prove to the
   PKI authorization to revoke the certificate on behalf of that PKI
   entity.

   No specific prerequisites apply in addition to those specified in
   Section 4.2.

   Note: An upstream PKI management entity will not be able to
   differentiate this PKI management operation from the ones described
   in Section 5.2.3.

   The message sequence for this PKI management operation is identical
   to that given in Section 4.2, with the following changes:

   1.  The rr message MUST be signed using the CMP protection key of the
       PKI management entity acting on behalf of the EE in this
       operation.

6.  CMP Message Transfer Mechanisms

   CMP messages are designed to be self-contained, such that, in
   principle, any reliable transfer mechanism can be used.  EEs will
   typically support only one transfer mechanism.  PKI management
   entities SHOULD offer HTTP and MAY offer CoAP where required.
   Piggybacking of CMP messages on any other reliable transfer protocol
   MAY be used, and file-based transfer MAY be used in case offline
   transfer is required.

   Independently of the means of transfer, it can happen that messages
   are lost or that a communication partner does not respond.  To
   prevent waiting indefinitely, each PKI entity that sends CMP requests
   should use a configurable per-request timeout, and each PKI
   management entity that handles CMP requests should use a configurable
   timeout in case a further request message is to be expected from the
   client side within the same transaction.  In this way, a hanging
   transaction can be closed cleanly with an error as described in
   Section 3.6 (failInfo bit: systemUnavail), and related resources (for
   instance, any cached extraCerts) can be freed.

   Moreover, there are various situations where the delivery of messages
   gets delayed.  For instance, a serving PKI management entity might
   take longer than expected to form a response due to administrative
   processes, resource constraints, or upstream message delivery delays.
   The transport layer itself may cause delays, for instance, due to
   offline transport, network segmentation, or intermittent network
   connectivity.  Part of these issues can be detected and handled at
   CMP level using pollReq and pollRep messages as described in
   Section 4.4, while others are better handled at transfer level.
   Depending on the transfer protocol and system architecture, solutions
   for handling delays at transfer level may be present and can be used
   for CMP connections, for instance, connection reestablishment and
   message retransmission.

   Note: Long timeout periods are helpful to maximize chances to handle
   minor delays at lower layers without the need for polling.

   Note: When using TCP and similar reliable connection-oriented
   transport protocols, which is typical in conjunction with HTTP, there
   is the option to keep the connection alive over multiple request-
   response message pairs.  This may improve efficiency.

   When conveying CMP messages in HTTP, CoAP, or MIME-based transfer
   protocols, the Internet media type "application/pkixcmp" MUST be set
   for transfer encoding as specified in Section 3.4 of CMP over HTTP
   [RFC6712] and Section 2.3 of CMP over CoAP [RFC9482].

6.1.  HTTP Transfer

   This transfer mechanism can be used by a PKI entity to transfer CMP
   messages over HTTP.  If HTTP transfer is used, the specifications
   described in [RFC6712] and updated by CMP Updates [RFC9480] MUST be
   followed.

   PKI management operations MUST use a URI path consisting of '/.well-
   known/cmp' or '/.well-known/cmp/p/<name>' as specified in Section 3.3
   of CMP Updates [RFC9480].  It SHOULD be followed by an operation
   label depending on the type of PKI management operation.

   +============================+====================+=========+
   | PKI Management Operation   |  URI Path Segment  | Details |
   +============================+====================+=========+
   | Enrolling an End Entity to |   initialization   | Section |
   | a New PKI                  |                    | 4.1.1   |
   +----------------------------+--------------------+---------+
   | Enrolling an End Entity to |   certification    | Section |
   | a Known PKI                |                    | 4.1.2   |
   +----------------------------+--------------------+---------+
   | Updating a Valid           |     keyupdate      | Section |
   | Certificate                |                    | 4.1.3   |
   +----------------------------+--------------------+---------+
   | Enrolling an End Entity    |       pkcs10       | Section |
   | Using a PKCS #10 Request   |                    | 4.1.4   |
   +----------------------------+--------------------+---------+
   | Revoking a Certificate     |     revocation     | Section |
   |                            |                    | 4.2     |
   +----------------------------+--------------------+---------+
   | Get CA Certificates        |     getcacerts     | Section |
   |                            |                    | 4.3.1   |
   +----------------------------+--------------------+---------+
   | Get Root CA Certificate    |   getrootupdate    | Section |
   | Update                     |                    | 4.3.2   |
   +----------------------------+--------------------+---------+
   | Get Certificate Request    | getcertreqtemplate | Section |
   | Template                   |                    | 4.3.3   |
   +----------------------------+--------------------+---------+
   | CRL Update Retrieval       |      getcrls       | Section |
   |                            |                    | 4.3.4   |
   +----------------------------+--------------------+---------+
   | Batching Messages          |       nested       | Section |
   |                            |                    | 5.2.2.2 |
   | Note: This path element is |                    |         |
   | applicable only between    |                    |         |
   | PKI management entities.   |                    |         |
   +----------------------------+--------------------+---------+

             Table 1: HTTP URI Path Segment <operation>

   If operation labels are used:

   *  independently of any variants used (see Sections 4.1.5, 4.1.6, and
      4.4), the operation label corresponding to the PKI management
      operation SHALL be used.

   *  any certConf or pollReq messages SHALL be sent to the same
      endpoint as determined by the PKI management operation.

   *  when a single request message is nested as described in
      Section 5.2.2.1, the label to use SHALL be the same as for the
      underlying PKI management operation.

   By sending a request to its preferred endpoint, the PKI entity will
   recognize, via the HTTP response status code, whether a configured
   URI is supported by the PKI management entity.

   In case a PKI management entity receives an unexpected HTTP status
   code from upstream, it MUST respond downstream with an error message
   as described in Section 3.6, using a failInfo bit corresponding to
   the status code, e.g., systemFailure.

   For certificate management, the major security goal is integrity and
   data origin authentication.  For delivery of centrally generated
   keys, confidentiality is also a must.  These goals are sufficiently
   achieved by CMP itself, also in an end-to-end fashion.

   If a second line of defense is required or general privacy concerns
   exist, TLS can be used to provide confidentiality on a hop-by-hop
   basis.  TLS should be used with certificate-based authentication to
   further protect the HTTP transfer as described in [RFC9110].  In
   addition, the recommendations provided in [RFC9325] should be
   followed.

   Note: The requirements for checking certificates given in [RFC5280]
   and either [RFC5246] or [RFC8446] must be followed for the TLS layer.
   Certificate status checking should be used for the TLS certificates
   of all communication partners.

   TLS with mutual authentication based on shared secret information may
   be used in case no suitable certificates for certificate-based
   authentication are available, e.g., a PKI management operation with
   MAC-based protection is used.

   Note: The entropy of the shared secret information is crucial for the
   level of protection available using shard secret information-based
   TLS authentication.  A pre-shared key (PSK) mechanism may be used
   with shared secret information with an entropy of at least 128 bits.
   Otherwise, a password-authenticated key exchange (PAKE) protocol is
   recommended.

   Note: The provisioning of client certificates and PSKs is out of
   scope of this document.

6.2.  CoAP Transfer

   This transfer mechanism can be used by a PKI entity to transfer CMP
   messages over CoAP [RFC7252], e.g., in constrained environments.  If
   CoAP transfer is used, the specifications described in CMP over CoAP
   [RFC9482] MUST be followed.

   PKI management operations MUST use a URI path consisting of '/.well-
   known/cmp' or '/.well-known/cmp/p/<name>' as specified in Section 2.1
   of CMP over CoAP [RFC9482].  It SHOULD be followed by an operation
   label depending on the type of PKI management operation.

   +=======================================+=========+=========+
   | PKI Management Operation              |   URI   | Details |
   |                                       |   Path  |         |
   |                                       | Segment |         |
   +=======================================+=========+=========+
   | Enrolling an End Entity to a New PKI  |    ir   | Section |
   |                                       |         | 4.1.1   |
   +---------------------------------------+---------+---------+
   | Enrolling an End Entity to a Known    |    cr   | Section |
   | PKI                                   |         | 4.1.2   |
   +---------------------------------------+---------+---------+
   | Updating a Valid Certificate          |   kur   | Section |
   |                                       |         | 4.1.3   |
   +---------------------------------------+---------+---------+
   | Enrolling an End Entity Using a PKCS  |   p10   | Section |
   | #10 Request                           |         | 4.1.4   |
   +---------------------------------------+---------+---------+
   | Revoking a Certificate                |    rr   | Section |
   |                                       |         | 4.2     |
   +---------------------------------------+---------+---------+
   | Get CA Certificates                   |   crts  | Section |
   |                                       |         | 4.3.1   |
   +---------------------------------------+---------+---------+
   | Get Root CA Certificate Update        |   rcu   | Section |
   |                                       |         | 4.3.2   |
   +---------------------------------------+---------+---------+
   | Get Certificate Request Template      |   att   | Section |
   |                                       |         | 4.3.3   |
   +---------------------------------------+---------+---------+
   | CRL Update Retrieval                  |   crls  | Section |
   |                                       |         | 4.3.4   |
   +---------------------------------------+---------+---------+
   | Batching Messages                     |   nest  | Section |
   |                                       |         | 5.2.2.2 |
   | Note: This path element is applicable |         |         |
   | only between PKI management entities. |         |         |
   +---------------------------------------+---------+---------+

             Table 2: CoAP URI Path Segment <operation>

   If operation labels are used:

   *  independently of any variants used (see Sections 4.1.5, 4.1.6, and
      4.4), the operation label corresponding to the PKI management
      operation SHALL be used.

   *  any certConf or pollReq messages SHALL be sent to the same
      endpoint, as determined by the PKI management operation.

   *  when a single request message is nested as described in
      Section 5.2.2.1, the label to use SHALL be the same as for the
      underlying PKI management operation.

   By sending a request to its preferred endpoint, the PKI entity will
   recognize, via the CoAP response status code, whether a configured
   URI is supported by the PKI management entity.  The CoAP-inherent
   discovery mechanisms MAY also be used.

   In case a PKI management entity receives an unexpected CoAP status
   code from upstream, it MUST respond downstream with an error message,
   as described in Section 3.6, using a failInfo bit corresponding to
   the status code, e.g., systemFailure.

   Like for HTTP transfer, to offer a second line of defense or to
   provide hop-by-hop privacy protection, DTLS may be utilized as
   described in CMP over CoAP [RFC9482].  If DTLS is utilized, the same
   boundary conditions (peer authentication, etc.) as those stated for
   TLS to protect HTTP transfer in Section 6.1 apply to DTLS likewise.

   Note: The provisioning of client certificates and PSKs is out of
   scope of this document.

6.3.  Piggybacking on Other Reliable Transfer

   CMP messages MAY also be transferred on some other reliable protocol,
   e.g., Extensible Authentication Protocol (EAP) or Message Queuing
   Telemetry Transport (MQTT).  Connection, delay, and error handling
   mechanisms similar to those specified for HTTP in [RFC6712] need to
   be implemented.

   A more detailed specification is out of scope of this document and
   would need to be given, for instance, in the scope of the transfer
   protocol used.

6.4.  Offline Transfer

   For transferring CMP messages between PKI entities, any mechanism
   that is able to store and forward binary objects of sufficient length
   and with sufficient reliability while preserving the order of
   messages for each transaction can be used.

   The transfer mechanism should be able to indicate message loss,
   excessive delay, and possibly other transmission errors.  In such
   cases, the PKI entities MUST report an error as specified in
   Section 3.6, as far as possible.

6.4.1.  File-Based Transfer

   CMP messages MAY be transferred between PKI entities using file-based
   mechanisms, for instance, when an EE is offline or a PKI management
   entity performs delayed delivery.  Each file MUST contain the ASN.1
   DER encoding of one CMP message only, where the message may be
   nested.  There MUST be no extraneous header or trailer information in
   the file.  The filename extension ".pki" MUST be used.

6.4.2.  Other Asynchronous Transfer Protocols

   Other asynchronous transfer protocols, e.g., email or website upload/
   download, MAY transfer CMP messages between PKI entities.  A MIME
   wrapping is defined for those environments that are MIME-native.  The
   MIME wrapping is specified in Section 3.1 of [RFC8551].

   The ASN.1 DER encoding of the CMP messages MUST be transferred using
   the "application/pkixcmp" content type and base64-encoded content
   transfer encoding, as specified in Section 3.4 of CMP over HTTP
   [RFC6712].  A filename MUST be included either in a "content-type" or
   a "content-disposition" statement.  The filename extension ".pki"
   MUST be used.

7.  Conformance Requirements

   This section defines which level of support for the various features
   specified in this profile is required for each type of PKI entity.

7.1.  PKI Management Operations

   The following table provides an overview of the PKI management
   operations specified in Sections 4 and 5 and states whether support
   by conforming EE, RA, and CA implementations is mandatory,
   recommended, optional, or not applicable.  Variants amend or change
   behavior of base PKI management operations and are therefore also
   included.

   The PKI management operation specifications in Section 4 assume that
   either the RA or CA is the PKI management entity that terminates the
   Certificate Management Protocol.  If the RA terminates CMP, it either
   responds directly as described in Section 5.1, or it forwards the
   certificate management operation towards the CA not using CMP.
   Section 5.2 describes different options of how an RA can forward a
   CMP message using CMP.  Section 5.3 offers the option that an RA
   operates on behalf on an EE and therefore takes the role of the EE in
   Section 4.


   +==========+=============================+========+========+========+
   | ID       | PKI Management Operations   | EE     | RA     | CA     |
   |          | and Variants                |        |        |        |
   +==========+=============================+========+========+========+
   | Generic  | Generic Aspects of PKI      | MUST   | MUST   | MUST   |
   |          | Messages and PKI            |        |        |        |
   |          | Management Operations,      |        |        |        |
   |          | Section 3                   |        |        |        |
   +----------+-----------------------------+--------+--------+--------+
   | IR       | Enrolling an End Entity to  | MUST   | MAY    | MUST   |
   |          | a New PKI, Section 4.1.1    |        |        |        |
   +----------+-----------------------------+--------+--------+--------+
   | CR       | Enrolling an End Entity to  | MAY    | MAY    | MAY    |
   |          | a Known PKI, Section 4.1.2  |        |        |        |
   +----------+-----------------------------+--------+--------+--------+
   | KUR      | Updating a Valid            | MUST   | MAY    | MUST   |
   |          | Certificate, Section 4.1.3  |        |        |        |
   +----------+-----------------------------+--------+--------+--------+
   | P10CR    | Enrolling an End Entity     | MAY    | MAY    | MAY    |
   |          | Using a PKCS #10 Request,   |        |        |        |
   |          | Section 4.1.4               |        |        |        |
   +----------+-----------------------------+--------+--------+--------+
   | MAC      | Using MAC-Based Protection  | MAY    | SHOULD | MAY    |
   |          | for Enrollment (IR, CR,     |        | 1)     |        |
   |          | and P10CR if supported),    |        |        |        |
   |          | Section 4.1.5               |        |        |        |
   +----------+-----------------------------+--------+--------+--------+
   | CKeyGen  | Adding Central Key Pair     | MAY    | MAY    | MAY    |
   |          | Generation to Enrollment    |        |        |        |
   |          | (IR, CR, KUR, and P10CR if  |        |        |        |
   |          | supported), Section 4.1.6   |        |        |        |
   +----------+-----------------------------+--------+--------+--------+
   | RR       | Revoking a Certificate,     | SHOULD | SHOULD | SHOULD |
   |          | Section 4.2                 |        | 2)     | 3)     |
   +----------+-----------------------------+--------+--------+--------+
   | CACerts  | Get CA Certificates,        | MAY    | MAY    | MAY    |
   |          | Section 4.3.1               |        |        |        |
   +----------+-----------------------------+--------+--------+--------+
   | RootUpd  | Get Root CA Certificate     | MAY    | MAY    | MAY    |
   |          | Update, Section 4.3.2       |        |        |        |
   +----------+-----------------------------+--------+--------+--------+
   | ReqTempl | Get Certificate Request     | MAY    | MAY    | MAY    |
   |          | Template, Section 4.3.3     |        |        |        |
   +----------+-----------------------------+--------+--------+--------+
   | CRLUpd   | CRL Update Retrieval,       | MAY    | MAY    | MAY    |
   |          | Section 4.3.4               |        |        |        |
   +----------+-----------------------------+--------+--------+--------+
   | Polling  | Handling Delayed Delivery,  | MAY    | MAY    | MAY    |
   |          | Section 4.4                 |        |        |        |
   +----------+-----------------------------+--------+--------+--------+
   | CertResp | Responding to a             | N/A    | MAY    | MUST   |
   |          | Certificate Request (IR,    |        |        |        |
   |          | CR, KUR, and P10CR if       |        |        |        |
   |          | supported), Section 5.1.1   |        |        |        |
   +----------+-----------------------------+--------+--------+--------+
   | CertConf | Responding to a             | N/A    | MAY    | MUST   |
   |          | Confirmation Message,       |        |        |        |
   |          | Section 5.1.2               |        |        |        |
   +----------+-----------------------------+--------+--------+--------+
   | RevResp  | Responding to a Revocation  | N/A    | MAY    | SHOULD |
   |          | Request, Section 5.1.3      |        |        |        |
   +----------+-----------------------------+--------+--------+--------+
   | GenResp  | Responding to a Support     | N/A    | MAY    | MAY    |
   |          | Message (CACerts, RootUpd,  |        |        |        |
   |          | ReqTempl, CRLUpd if         |        |        |        |
   |          | supported), Section 5.1.4   |        |        |        |
   +----------+-----------------------------+--------+--------+--------+
   | InitPoll | Initiating Delayed          | N/A    | MAY    | MAY    |
   |          | Delivery, Section 5.1.5     |        |        |        |
   +----------+-----------------------------+--------+--------+--------+
   | FwdKeep  | Forwarding Messages - Not   | N/A    | MUST   | N/A    |
   |          | Changing Protection,        |        |        |        |
   |          | Section 5.2.1               |        |        |        |
   +----------+-----------------------------+--------+--------+--------+
   | FwdAddS  | Forwarding Messages -       | N/A    | MUST   | MUST   |
   |          | Adding Protection to a      |        |        |        |
   |          | Request Message,            |        |        |        |
   |          | Section 5.2.2.1             |        |        |        |
   +----------+-----------------------------+--------+--------+--------+
   | FwdAddB  | Forwarding Messages -       | N/A    | MAY    | MAY    |
   |          | Batching Messages,          |        |        |        |
   |          | Section 5.2.2.2             |        |        |        |
   +----------+-----------------------------+--------+--------+--------+
   | FwdReqKP | Forwarding Messages - Not   | N/A    | SHOULD | N/A    |
   |          | Changing Proof-of-          |        | 1)     |        |
   |          | Possession,                 |        |        |        |
   |          | Section 5.2.3.1             |        |        |        |
   +----------+-----------------------------+--------+--------+--------+
   | FwdReqBP | Forwarding Messages -       | N/A    | MAY    | MAY    |
   |          | Using raVerified,           |        |        |        |
   |          | Section 5.2.3.2             |        |        |        |
   +----------+-----------------------------+--------+--------+--------+
   | CertROnB | Acting on Behalf of Other   | N/A    | MAY    | N/A    |
   |          | PKI Entities - Requesting   |        |        |        |
   |          | a Certificate,              |        |        |        |
   |          | Section 5.3.1               |        |        |        |
   +----------+-----------------------------+--------+--------+--------+
   | RevROnB  | Acting on Behalf of Other   | N/A    | SHOULD | SHOULD |
   |          | PKI Entities - Revoking a   |        | 2)     | 3)     |
   |          | Certificate, Section 5.3.2  |        |        |        |
   +----------+-----------------------------+--------+--------+--------+

    Table 3: Level of Support for PKI Management Operations and Variants

   1)  The RA should be able to change the CMP message protection from
       MAC-based to signature-based protection; see Section 5.2.3.1.

   2)  The RA should be able to request certificate revocation on behalf
       of an EE (see Section 5.3.2), e.g., in order to handle incidents.

   3)  An alternative would be to perform revocation at the CA without
       using CMP, for instance, using a local administration interface.

7.2.  Message Transfer

   CMP does not have specific needs regarding message transfer, except
   that, for each request message sent, eventually a sequence of one
   response message should be received.  Therefore, virtually any
   reliable transfer mechanism can be used, such as HTTP, CoAP, and
   file-based offline transfer.  Thus, this document does not require
   any specific transfer protocol to be supported by conforming
   implementations.

   On different links between PKI entities (e.g., EE-RA and RA-CA),
   different transfer mechanisms, as specified in Section 6, may be
   used.

   HTTP SHOULD be supported and CoAP MAY be supported at all PKI
   entities for maximizing general interoperability at transfer level.
   Yet full flexibility is retained to choose whatever transfer
   mechanism is suitable, for instance, for devices and system
   architectures with specific constraints.

   The following table lists the name and level of support specified for
   each transfer mechanism.

   +=========+=======================+========+========+========+
   | ID      | Message Transfer Type | EE     | RA     | CA     |
   +=========+=======================+========+========+========+
   | HTTP    | HTTP Transfer,        | SHOULD | SHOULD | SHOULD |
   |         | Section 6.1           |        |        |        |
   +---------+-----------------------+--------+--------+--------+
   | CoAP    | CoAP Transfer,        | MAY    | MAY    | MAY    |
   |         | Section 6.2           |        |        |        |
   +---------+-----------------------+--------+--------+--------+
   | Piggyb  | Piggybacking on Other | MAY    | MAY    | MAY    |
   |         | Reliable Transfer,    |        |        |        |
   |         | Section 6.3           |        |        |        |
   +---------+-----------------------+--------+--------+--------+
   | Offline | Offline Transfer,     | MAY    | MAY    | MAY    |
   |         | Section 6.4           |        |        |        |
   +---------+-----------------------+--------+--------+--------+

        Table 4: Level of Support for Message Transfer Types

8.  IANA Considerations

   IANA has registered the following content in the "CMP Well-Known URI
   Path Segments" registry (see <https://www.iana.org/assignments/cmp>),
   as defined in [RFC8615].

   +====================+==========================+===============+
   | Path Segment       | Description              | Reference     |
   +====================+==========================+===============+
   | initialization     | Enrolling an End Entity  | RFC 9483,     |
   |                    | to a New PKI over HTTP   | Section 4.1.1 |
   +--------------------+--------------------------+---------------+
   | certification      | Enrolling an End Entity  | RFC 9483,     |
   |                    | to a Known PKI over HTTP | Section 4.1.2 |
   +--------------------+--------------------------+---------------+
   | keyupdate          | Updating a Valid         | RFC 9483,     |
   |                    | Certificate over HTTP    | Section 4.1.3 |
   +--------------------+--------------------------+---------------+
   | pkcs10             | Enrolling an End Entity  | RFC 9483,     |
   |                    | Using a PKCS #10 Request | Section 4.1.4 |
   |                    | over HTTP                |               |
   +--------------------+--------------------------+---------------+
   | revocation         | Revoking a Certificate   | RFC 9483,     |
   |                    | over HTTP                | Section 4.2   |
   +--------------------+--------------------------+---------------+
   | getcacerts         | Get CA Certificates over | RFC 9483,     |
   |                    | HTTP                     | Section 4.3.1 |
   +--------------------+--------------------------+---------------+
   | getrootupdate      | Get Root CA Certificate  | RFC 9483,     |
   |                    | Update over HTTP         | Section 4.3.2 |
   +--------------------+--------------------------+---------------+
   | getcertreqtemplate | Get Certificate Request  | RFC 9483,     |
   |                    | Template over HTTP       | Section 4.3.3 |
   +--------------------+--------------------------+---------------+
   | getcrls            | CRL Update Retrieval     | RFC 9483,     |
   |                    | over HTTP                | Section 4.3.4 |
   +--------------------+--------------------------+---------------+
   | nested             | Batching Messages over   | RFC 9483,     |
   |                    | HTTP                     | Section       |
   |                    |                          | 5.2.2.2       |
   +--------------------+--------------------------+---------------+
   | ir                 | Enrolling an End Entity  | RFC 9483,     |
   |                    | to a New PKI over CoAP   | Section 4.1.1 |
   +--------------------+--------------------------+---------------+
   | cr                 | Enrolling an End Entity  | RFC 9483,     |
   |                    | to a Known PKI over CoAP | Section 4.1.2 |
   +--------------------+--------------------------+---------------+
   | kur                | Updating a Valid         | RFC 9483,     |
   |                    | Certificate over CoAP    | Section 4.1.3 |
   +--------------------+--------------------------+---------------+
   | p10                | Enrolling an End Entity  | RFC 9483,     |
   |                    | Using a PKCS #10 Request | Section 4.1.4 |
   |                    | over CoAP                |               |
   +--------------------+--------------------------+---------------+
   | rr                 | Revoking a Certificate   | RFC 9483,     |
   |                    | over CoAP                | Section 4.2   |
   +--------------------+--------------------------+---------------+
   | crts               | Get CA Certificates over | RFC 9483,     |
   |                    | CoAP                     | Section 4.3.1 |
   +--------------------+--------------------------+---------------+
   | rcu                | Get Root CA Certificate  | RFC 9483,     |
   |                    | Update over CoAP         | Section 4.3.2 |
   +--------------------+--------------------------+---------------+
   | att                | Get Certificate Request  | RFC 9483,     |
   |                    | Template over CoAP       | Section 4.3.3 |
   +--------------------+--------------------------+---------------+
   | crls               | CRL Update Retrieval     | RFC 9483,     |
   |                    | over CoAP                | Section 4.3.4 |
   +--------------------+--------------------------+---------------+
   | nest               | Batching Messages over   | RFC 9483,     |
   |                    | CoAP                     | Section       |
   |                    |                          | 5.2.2.2       |
   +--------------------+--------------------------+---------------+

    Table 5: New "CMP Well-Known URI Path Segments" Registry Entries

9.  Security Considerations

   The security considerations laid out in CMP [RFC4210] and updated by
   CMP Updates [RFC9480], CMP Algorithms [RFC9481], CRMF [RFC4211],
   Algorithm Requirements Update [RFC9045], CMP over HTTP [RFC6712], and
   CMP over CoAP [RFC9482] apply.

   Trust anchors for chain validations are often provided in the form of
   self-signed certificates.  All trust anchors MUST be stored on the
   device with integrity protection.  In some cases, a PKI entity may
   not have sufficient storage for the complete certificates.  In such
   cases, it may only store, e.g., a hash of each self-signed
   certificate and require receiving the certificate in the extraCerts
   field, as described in Section 3.3.  If such self-signed certificates
   are provided in-band in the messages, they MUST be verified using
   information from the trust store of the PKI entity.

   For TLS using shared secret information-based authentication, both
   PSK and PAKE provide the same amount of protection against a real-
   time authentication attack, which is directly the amount of entropy
   in the shared secret.  The difference between a pre-shared key (PSK)
   and a password-authenticated key exchange (PAKE) protocol is in the
   level of long-term confidentiality of the TLS messages against brute-
   force decryption, where a PSK-based cipher suite only provides
   security according to the entropy of the shared secret, while a PAKE-
   based cipher suite provides full security independent of the entropy
   of the shared secret.

10.  References

10.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC2986]  Nystrom, M. and B. Kaliski, "PKCS #10: Certification
              Request Syntax Specification Version 1.7", RFC 2986,
              DOI 10.17487/RFC2986, November 2000,
              <https://www.rfc-editor.org/info/rfc2986>.

   [RFC4210]  Adams, C., Farrell, S., Kause, T., and T. Mononen,
              "Internet X.509 Public Key Infrastructure Certificate
              Management Protocol (CMP)", RFC 4210,
              DOI 10.17487/RFC4210, September 2005,
              <https://www.rfc-editor.org/info/rfc4210>.

   [RFC4211]  Schaad, J., "Internet X.509 Public Key Infrastructure
              Certificate Request Message Format (CRMF)", RFC 4211,
              DOI 10.17487/RFC4211, September 2005,
              <https://www.rfc-editor.org/info/rfc4211>.

   [RFC5280]  Cooper, D., Santesson, S., Farrell, S., Boeyen, S.,
              Housley, R., and W. Polk, "Internet X.509 Public Key
              Infrastructure Certificate and Certificate Revocation List
              (CRL) Profile", RFC 5280, DOI 10.17487/RFC5280, May 2008,
              <https://www.rfc-editor.org/info/rfc5280>.

   [RFC5652]  Housley, R., "Cryptographic Message Syntax (CMS)", STD 70,
              RFC 5652, DOI 10.17487/RFC5652, September 2009,
              <https://www.rfc-editor.org/info/rfc5652>.

   [RFC5958]  Turner, S., "Asymmetric Key Packages", RFC 5958,
              DOI 10.17487/RFC5958, August 2010,
              <https://www.rfc-editor.org/info/rfc5958>.

   [RFC6712]  Kause, T. and M. Peylo, "Internet X.509 Public Key
              Infrastructure -- HTTP Transfer for the Certificate
              Management Protocol (CMP)", RFC 6712,
              DOI 10.17487/RFC6712, September 2012,
              <https://www.rfc-editor.org/info/rfc6712>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

   [RFC8615]  Nottingham, M., "Well-Known Uniform Resource Identifiers
              (URIs)", RFC 8615, DOI 10.17487/RFC8615, May 2019,
              <https://www.rfc-editor.org/info/rfc8615>.

   [RFC8933]  Housley, R., "Update to the Cryptographic Message Syntax
              (CMS) for Algorithm Identifier Protection", RFC 8933,
              DOI 10.17487/RFC8933, October 2020,
              <https://www.rfc-editor.org/info/rfc8933>.

   [RFC9045]  Housley, R., "Algorithm Requirements Update to the
              Internet X.509 Public Key Infrastructure Certificate
              Request Message Format (CRMF)", RFC 9045,
              DOI 10.17487/RFC9045, June 2021,
              <https://www.rfc-editor.org/info/rfc9045>.

   [RFC9110]  Fielding, R., Ed., Nottingham, M., Ed., and J. Reschke,
              Ed., "HTTP Semantics", STD 97, RFC 9110,
              DOI 10.17487/RFC9110, June 2022,
              <https://www.rfc-editor.org/info/rfc9110>.

   [RFC9325]  Sheffer, Y., Saint-Andre, P., and T. Fossati,
              "Recommendations for Secure Use of Transport Layer
              Security (TLS) and Datagram Transport Layer Security
              (DTLS)", BCP 195, RFC 9325, DOI 10.17487/RFC9325, November
              2022, <https://www.rfc-editor.org/info/rfc9325>.

   [RFC9480]  Brockhaus, H., von Oheimb, D., and J. Gray, "Certificate
              Management Protocol (CMP) Updates", RFC 9480,
              DOI 10.17487/RFC9480, November 2023,
              <https://www.rfc-editor.org/info/rfc9480>.

   [RFC9481]  Brockhaus, H., Aschauer, H., Ounsworth, M., and J. Gray,
              "Certificate Management Protocol (CMP) Algorithms",
              RFC 9481, DOI 10.17487/RFC9481, November 2023,
              <https://www.rfc-editor.org/info/rfc9481>.

   [RFC9482]  Sahni, M., Ed. and S. Tripathi, Ed., "Constrained
              Application Protocol (CoAP) Transfer for the Certificate
              Management Protocol", RFC 9482, DOI 10.17487/RFC9482,
              November 2023, <https://www.rfc-editor.org/info/rfc9482>.

10.2.  Informative References

   [BRSKI-AE] von Oheimb, D., Fries, S., and H. Brockhaus, "BRSKI-AE:
              Alternative Enrollment Protocols in BRSKI", Work in
              Progress, Internet-Draft, draft-ietf-anima-brski-ae-05, 28
              June 2023, <https://datatracker.ietf.org/doc/html/draft-
              ietf-anima-brski-ae-05>.

   [BRSKI-PRM]
              Fries, S., Werner, T., Lear, E., and M. Richardson, "BRSKI
              with Pledge in Responder Mode (BRSKI-PRM)", Work in
              Progress, Internet-Draft, draft-ietf-anima-brski-prm-10,
              23 October 2023, <https://datatracker.ietf.org/doc/html/
              draft-ietf-anima-brski-prm-10>.

   [ETSI-3GPP.33.310]
              3GPP, "Network Domain Security (NDS); Authentication
              Framework (AF)", 3GPP TS 33.310 16.6.0, December 2020,
              <http://www.3gpp.org/ftp/Specs/html-info/33310.htm>.

   [ETSI-EN.319411-1]
              ETSI, "Electronic Signatures and Infrastructures (ESI);
              Policy and security requirements for Trust Service
              Providers issuing certificates; Part 1: General
              requirements", V1.3.1, ETSI EN 319 411-1, May 2021,
              <https://www.etsi.org/deliver/
              etsi_en/319400_319499/31941101/01.03.01_60/
              en_31941101v010301p.pdf>.

   [HTTP-CMP] Brockhaus, H., von Oheimb, D., Ounsworth, M., and J. Gray,
              "Internet X.509 Public Key Infrastructure -- HTTP Transfer
              for the Certificate Management Protocol (CMP)", Work in
              Progress, Internet-Draft, draft-ietf-lamps-rfc6712bis-03,
              10 February 2023, <https://datatracker.ietf.org/doc/html/
              draft-ietf-lamps-rfc6712bis-03>.

   [IEC.62443-3-3]
              IEC, "Industrial communication networks - Network and
              system security - Part 3-3: System security requirements
              and security levels", IEC 62443-3-3:2013, August 2013,
              <https://webstore.iec.ch/publication/7033>.

   [IEEE.802.1AR_2018]
              IEEE, "IEEE Standard for Local and Metropolitan Area
              Networks - Secure Device Identity", IEEE Std 802.1AR-2018,
              DOI 10.1109/IEEESTD.2018.8423794, August 2018,
              <https://ieeexplore.ieee.org/document/8423794>.

   [NIST.CSWP.04162018]
              National Institute of Standards and Technology (NIST),
              "Framework for Improving Critical Infrastructure
              Cybersecurity", Version 1.1,
              DOI 10.6028/NIST.CSWP.04162018, April 2018,
              <http://nvlpubs.nist.gov/nistpubs/CSWP/
              NIST.CSWP.04162018.pdf>.

   [NIST.SP.800-57p1r5]
              Barker, E., "Recommendation for Key Management: Part 1 -
              General", DOI 10.6028/NIST.SP.800-57pt1r5, May 2020,
              <https://doi.org/10.6028/NIST.SP.800-57pt1r5>.

   [PKIX-CMP] Brockhaus, H., von Oheimb, D., Ounsworth, M., and J. Gray,
              "Internet X.509 Public Key Infrastructure -- Certificate
              Management Protocol (CMP)", Work in Progress, Internet-
              Draft, draft-ietf-lamps-rfc4210bis-07, 19 June 2023,
              <https://datatracker.ietf.org/doc/html/draft-ietf-lamps-
              rfc4210bis-07>.

   [RFC3647]  Chokhani, S., Ford, W., Sabett, R., Merrill, C., and S.
              Wu, "Internet X.509 Public Key Infrastructure Certificate
              Policy and Certification Practices Framework", RFC 3647,
              DOI 10.17487/RFC3647, November 2003,
              <https://www.rfc-editor.org/info/rfc3647>.

   [RFC5246]  Dierks, T. and E. Rescorla, "The Transport Layer Security
              (TLS) Protocol Version 1.2", RFC 5246,
              DOI 10.17487/RFC5246, August 2008,
              <https://www.rfc-editor.org/info/rfc5246>.

   [RFC5753]  Turner, S. and D. Brown, "Use of Elliptic Curve
              Cryptography (ECC) Algorithms in Cryptographic Message
              Syntax (CMS)", RFC 5753, DOI 10.17487/RFC5753, January
              2010, <https://www.rfc-editor.org/info/rfc5753>.

   [RFC7030]  Pritikin, M., Ed., Yee, P., Ed., and D. Harkins, Ed.,
              "Enrollment over Secure Transport", RFC 7030,
              DOI 10.17487/RFC7030, October 2013,
              <https://www.rfc-editor.org/info/rfc7030>.

   [RFC7252]  Shelby, Z., Hartke, K., and C. Bormann, "The Constrained
              Application Protocol (CoAP)", RFC 7252,
              DOI 10.17487/RFC7252, June 2014,
              <https://www.rfc-editor.org/info/rfc7252>.

   [RFC8366]  Watsen, K., Richardson, M., Pritikin, M., and T. Eckert,
              "A Voucher Artifact for Bootstrapping Protocols",
              RFC 8366, DOI 10.17487/RFC8366, May 2018,
              <https://www.rfc-editor.org/info/rfc8366>.

   [RFC8446]  Rescorla, E., "The Transport Layer Security (TLS) Protocol
              Version 1.3", RFC 8446, DOI 10.17487/RFC8446, August 2018,
              <https://www.rfc-editor.org/info/rfc8446>.

   [RFC8551]  Schaad, J., Ramsdell, B., and S. Turner, "Secure/
              Multipurpose Internet Mail Extensions (S/MIME) Version 4.0
              Message Specification", RFC 8551, DOI 10.17487/RFC8551,
              April 2019, <https://www.rfc-editor.org/info/rfc8551>.

   [RFC8572]  Watsen, K., Farrer, I., and M. Abrahamsson, "Secure Zero
              Touch Provisioning (SZTP)", RFC 8572,
              DOI 10.17487/RFC8572, April 2019,
              <https://www.rfc-editor.org/info/rfc8572>.

   [RFC8649]  Housley, R., "Hash Of Root Key Certificate Extension",
              RFC 8649, DOI 10.17487/RFC8649, August 2019,
              <https://www.rfc-editor.org/info/rfc8649>.

   [RFC8995]  Pritikin, M., Richardson, M., Eckert, T., Behringer, M.,
              and K. Watsen, "Bootstrapping Remote Secure Key
              Infrastructure (BRSKI)", RFC 8995, DOI 10.17487/RFC8995,
              May 2021, <https://www.rfc-editor.org/info/rfc8995>.

   [SZTP-CSR] Watsen, K., Housley, R., and S. Turner, "Conveying a
              Certificate Signing Request (CSR) in a Secure Zero Touch
              Provisioning (SZTP) Bootstrapping Request", Work in
              Progress, Internet-Draft, draft-ietf-netconf-sztp-csr-14,
              2 March 2022, <https://datatracker.ietf.org/doc/html/
              draft-ietf-netconf-sztp-csr-14>.

   [UNISIG.Subset-137]
              UNISIG, "ERTMS/ETCS On-line Key Management FFFIS", Subset-
              137, V1.0.0, December 2015,
              <https://www.era.europa.eu/system/files/2023-01/
              sos3_index083_-_subset-137_v100.pdf>.

Appendix A.  Example CertReqTemplate

   Suppose the server requires that the certTemplate contains:

   *  the issuer field with a value to be filled in by the EE,

   *  the subject field with a common name to be filled in by the EE and
      two organizational unit fields with given values "myDept" and
      "myGroup",

   *  the publicKey field contains an Elliptic Curve Cryptography (ECC)
      key on curve secp256r1 or an RSA public key of length 2048,

   *  the subjectAltName extension with DNS name "www.myServer.com" and
      an IP address to be filled in,

   *  the keyUsage extension marked critical with the value
      digitalSignature and keyAgreement, and

   *  the extKeyUsage extension with values to be filled in by the EE.

   Then the infoValue with certTemplate and keySpec fields returned to
   the EE will be encoded as follows:

   SEQUENCE {
     SEQUENCE {
       [3] {
         SEQUENCE {}
         }
       [5] {
         SEQUENCE {
           SET {
             SEQUENCE {
               OBJECT IDENTIFIER commonName (2 5 4 3)
               UTF8String ""
               }
             }
           SET {
             SEQUENCE {
               OBJECT IDENTIFIER organizationalUnitName (2 5 4 11)
               UTF8String "myDept"
               }
             }
           SET {
             SEQUENCE {
               OBJECT IDENTIFIER organizationalUnitName (2 5 4 11)
               UTF8String "myGroup"
               }
             }
           }
         }
       [9] {
         SEQUENCE {
           OBJECT IDENTIFIER subjectAltName (2 5 29 17)
           OCTET STRING, encapsulates {
             SEQUENCE {
               [2] "www.myServer.com"
               [7] ""
               }
             }
           }
         SEQUENCE {
           OBJECT IDENTIFIER keyUsage (2 5 29 15)
           BOOLEAN TRUE
           OCTET STRING, encapsulates {
             BIT STRING 3 unused bits
               "10001"B
             }
           }
         SEQUENCE {
           OBJECT IDENTIFIER extKeyUsage (2 5 29 37)
           OCTET STRING, encapsulates {
             SEQUENCE {}
             }
           }
         }
       }
     SEQUENCE {
       SEQUENCE {
         OBJECT IDENTIFIER algId (1 3 6 1 5 5 7 5 1 11)
           SEQUENCE {
             OBJECT IDENTIFIER ecPublicKey (1 2 840 10045 2 1)
             OBJECT IDENTIFIER secp256r1 (1 2 840 10045 3 1 7)
             }
         }
       SEQUENCE {
         OBJECT IDENTIFIER rsaKeyLen (1 3 6 1 5 5 7 5 1 12)
         INTEGER 2048
         }
       }
     }

Acknowledgements

   We thank the various reviewers of this document.

Authors' Addresses

   Hendrik Brockhaus
   Siemens
   Werner-von-Siemens-Strasse 1
   80333 Munich
   Germany
   Email: hendrik.brockhaus@siemens.com
   URI:   https://www.siemens.com


   David von Oheimb
   Siemens
   Werner-von-Siemens-Strasse 1
   80333 Munich
   Germany
   Email: david.von.oheimb@siemens.com
   URI:   https://www.siemens.com