Rfc8177
TitleYANG Data Model for Key Chains
AuthorA. Lindem, Ed., Y. Qu, D. Yeung, I. Chen, J. Zhang
DateJune 2017
Format:TXT, HTML
Status:PROPOSED STANDARD






Internet Engineering Task Force (IETF)                    A. Lindem, Ed.
Request for Comments: 8177                                 Cisco Systems
Category: Standards Track                                          Y. Qu
ISSN: 2070-1721                                                   Huawei
                                                                D. Yeung
                                                             Arrcus, Inc
                                                                 I. Chen
                                                                   Jabil
                                                                J. Zhang
                                                        Juniper Networks
                                                               June 2017


                     YANG Data Model for Key Chains

Abstract

   This document describes the key chain YANG data model.  Key chains
   are commonly used for routing protocol authentication and other
   applications requiring symmetric keys.  A key chain is a list
   containing one or more elements containing a Key ID, key string,
   send/accept lifetimes, and the associated authentication or
   encryption algorithm.  By properly overlapping the send and accept
   lifetimes of multiple key chain elements, key strings and algorithms
   may be gracefully updated.  By representing them in a YANG data
   model, key distribution can be automated.

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 7841.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   http://www.rfc-editor.org/info/rfc8177.











RFC 8177                     YANG Key Chain                    June 2017


Copyright Notice

   Copyright (c) 2017 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
     1.1.  Requirements Notation . . . . . . . . . . . . . . . . . .   3
     1.2.  Tree Diagrams . . . . . . . . . . . . . . . . . . . . . .   3
   2.  Problem Statement . . . . . . . . . . . . . . . . . . . . . .   4
     2.1.  Applicability . . . . . . . . . . . . . . . . . . . . . .   4
     2.2.  Graceful Key Rollover Using Key Chains  . . . . . . . . .   4
   3.  Design of the Key Chain Model . . . . . . . . . . . . . . . .   5
     3.1.  Key Chain Operational State . . . . . . . . . . . . . . .   6
     3.2.  Key Chain Model Features  . . . . . . . . . . . . . . . .   6
     3.3.  Key Chain Model Tree  . . . . . . . . . . . . . . . . . .   7
   4.  Key Chain YANG Model  . . . . . . . . . . . . . . . . . . . .   8
   5.  Security Considerations . . . . . . . . . . . . . . . . . . .  16
   6.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  17
   7.  References  . . . . . . . . . . . . . . . . . . . . . . . . .  18
     7.1.  Normative References  . . . . . . . . . . . . . . . . . .  18
     7.2.  Informative References  . . . . . . . . . . . . . . . . .  19
   Appendix A.  Examples . . . . . . . . . . . . . . . . . . . . . .  21
     A.1.  Simple Key Chain with an Always Valid Single Key  . . . .  21
     A.2.  Key Chain with Keys Having Different Lifetimes  . . . . .  21
     A.3.  Key Chain with Independent Send and Accept Lifetimes  . .  23
   Contributors  . . . . . . . . . . . . . . . . . . . . . . . . . .  24
   Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . .  24
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  25











RFC 8177                     YANG Key Chain                    June 2017


1.  Introduction

   This document describes the key chain YANG [YANG-1.1] data model.
   Key chains are commonly used for routing protocol authentication and
   other applications requiring symmetric keys.  A key chain is a list
   containing one or more elements containing a Key ID, key string,
   send/accept lifetimes, and the associated authentication or
   encryption algorithm.  By properly overlapping the send and accept
   lifetimes of multiple key chain elements, key strings and algorithms
   may be gracefully updated.  By representing them in a YANG data
   model, key distribution can be automated.

   In some applications, the protocols do not use the key chain element
   key directly, but rather a key derivation function is used to derive
   a short-lived key from the key chain element key (e.g., the master
   keys used in [TCP-AO]).

1.1.  Requirements Notation

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in
   BCP 14 [KEYWORDS] [KEYWORDS-UPD] when, and only when, they appear in
   all capitals, as shown here.

1.2.  Tree Diagrams

   A simplified graphical representation of the complete data tree is
   presented in Section 3.3.  The following tree notation is used.

   o  Brackets "[" and "]" enclose YANG list keys.  These YANG list keys
      should not be confused with the key chain keys.

   o  Curly braces "{" and "}" contain names of optional features that
      make the corresponding node conditional.

   o  Abbreviations before data node names: "rw" means configuration
      (read-write), "ro" means state data (read-only), "-x" means RPC
      operations, and "-n" means notifications.

   o  Symbols after data node names: "?" means an optional node, "!"
      denotes a container with presence, and "*" denotes a "list" or
      "leaf-list".

   o  Parentheses enclose choice and case nodes, and case nodes are also
      marked with a colon (":").





RFC 8177                     YANG Key Chain                    June 2017


   o  Ellipsis ("...") stands for contents of subtrees that are not
      shown.

2.  Problem Statement

   This document describes a YANG [YANG-1.1] data model for key chains.
   Key chains have been implemented and deployed by a large percentage
   of network equipment vendors.  Providing a standard YANG model will
   facilitate automated key distribution and non-disruptive key
   rollover.  This will aid in tightening the security of the core
   routing infrastructure as recommended in [IAB-REPORT].

   A key chain is a list containing one or more elements containing a
   Key ID, key string, send/accept lifetimes, and the associated
   authentication or encryption algorithm.  A key chain can be used by
   any service or application requiring authentication or encryption
   using symmetric keys.  In essence, the key chain is a reusable key
   policy that can be referenced wherever it is required.  The key chain
   construct has been implemented by most networking vendors and
   deployed in many networks.

   A conceptual representation of a crypto key table is described in
   [CRYPTO-KEYTABLE].  The crypto key table includes keys as well as
   their corresponding lifetimes and algorithms.  Additionally, the key
   table includes key selection criteria and is designed for a
   deployment model where the details of the applications or services
   requiring authentication or encryption permeate into the key
   database.  The YANG key chain model described herein doesn't include
   key selection criteria or support this deployment model.  At the same
   time, it does not preclude it.  [YANG-CRYPTO-KEYTABLE] describes
   augmentations to the key chain YANG model in support of key selection
   criteria.

2.1.  Applicability

   Other YANG modules may reference ietf-key-chain YANG module key-chain
   names for authentication and encryption applications.  A YANG type
   has been provided to facilitate reference to the key-chain name
   without having to specify the complete YANG XML Path Language (XPath)
   expression.

2.2.  Graceful Key Rollover Using Key Chains

   Key chains may be used to gracefully update the key string and/or
   algorithm used by an application for authentication or encryption.
   To achieve graceful key rollover, the receiver MAY accept all the





RFC 8177                     YANG Key Chain                    June 2017


   keys that have a valid accept lifetime, and the sender MAY send the
   key with the most recent send lifetime.  One scenario for
   facilitating key rollover is to:

   1.  Distribute a key chain with a new key to all the routers or other
       network devices in the domain of that key chain.  The new key's
       accept lifetime should be such that it is accepted during the key
       rollover period.  The send lifetime should be a time in the
       future when it can be assured that all the routers in the domain
       of that key are upgraded.  This will have no immediate impact on
       the keys used for transmission.

   2.  Assure that all the network devices have been updated with the
       updated key chain and that their system times are roughly
       synchronized.  The system times of devices within an
       administrative domain are commonly synchronized (e.g., using the
       Network Time Protocol (NTP) [NTP-PROTO]).  This also may be
       automated.

   3.  When the send lifetime of the new key becomes valid, the network
       devices within the domain of that key chain will use the new key
       for transmissions.

   4.  At some point in the future, a new key chain with the old key
       removed may be distributed to the network devices within the
       domain of the key chain.  However, this may be deferred until the
       next key rollover.  If this is done, the key chain will always
       include two keys: either the current and future key (during key
       rollovers) or the current and previous keys (between key
       rollovers).

   Since the most recent send lifetime is defined as the one with the
   latest start-time, specification of "always" will prevent using the
   graceful key rollover technique described above.  Other key
   configuration and usage scenarios are possible, but these are beyond
   the scope of this document.

3.  Design of the Key Chain Model

   The ietf-key-chain module contains a list of one or more keys indexed
   by a Key ID.  For some applications (e.g., OSPFv3 [OSPFV3-AUTH]), the
   Key ID is used to identify the key chain key to be used.  In addition
   to the Key ID, each key chain key includes a key string and a
   cryptographic algorithm.  Optionally, the key chain keys include
   send/accept lifetimes.  If the send/accept lifetime is unspecified,
   the key is always considered valid.





RFC 8177                     YANG Key Chain                    June 2017


   Note that different key values for transmission versus acceptance may
   be supported with multiple key chain elements.  The key used for
   transmission will have a valid send-lifetime and invalid accept-
   lifetime (e.g., has an end-time equal to the start-time).  The key
   used for acceptance will have a valid accept-lifetime and invalid
   send-lifetime.

   Due to the differences in key chain implementations across various
   vendors, some of the data elements are optional.  Finally, the crypto
   algorithm identities are provided for reuse when configuring legacy
   authentication and encryption not using key chains.

   A key chain is identified by a unique name within the scope of the
   network device.  The "key-chain-ref" typedef SHOULD be used by other
   YANG modules when they need to reference a configured key chain.

3.1.  Key Chain Operational State

   The key chain operational state is included in the same tree as key
   chain configuration consistent with Network Management Datastore
   Architecture [NMDA].  The timestamp of the last key chain
   modification is also maintained in the operational state.
   Additionally, the operational state includes an indication of whether
   or not a key chain key is valid for transmission or acceptance.

3.2.  Key Chain Model Features

   Features are used to handle differences between vendor
   implementations.  For example, not all vendors support configuration
   of an acceptance tolerance or configuration of key strings in
   hexadecimal.  They are also used to support security requirements
   (e.g., TCP-AO algorithms [TCP-AO-ALGORITHMS]) not yet implemented by
   vendors or implemented by only a single vendor.

   It is common for an entity with sufficient permissions to read and
   store a device's configuration, which would include the contents of
   this model.  To avoid unnecessarily seeing and storing the keys in
   cleartext, this model provides the aes-key-wrap feature.  More
   details are described in the Security Considerations (Section 5).












RFC 8177                     YANG Key Chain                    June 2017


3.3.  Key Chain Model Tree

   +--rw key-chains
      +--rw key-chain* [name]
      |  +--rw name                       string
      |  +--rw description?               string
      |  +--rw accept-tolerance {accept-tolerance}?
      |  |  +--rw duration?   uint32
      |  +--ro last-modified-timestamp?   yang:date-and-time
      |  +--rw key* [key-id]
      |     +--rw key-id                    uint64
      |     +--rw lifetime
      |     |  +--rw (lifetime)?
      |     |     +--:(send-and-accept-lifetime)
      |     |     |  +--rw send-accept-lifetime
      |     |     |     +--rw (lifetime)?
      |     |     |        +--:(always)
      |     |     |        |  +--rw always?            empty
      |     |     |        +--:(start-end-time)
      |     |     |           +--rw start-date-time?
      |     |     |           |       yang:date-and-time
      |     |     |           +--rw (end-time)?
      |     |     |              +--:(infinite)
      |     |     |              |  +--rw no-end-time?       empty
      |     |     |              +--:(duration)
      |     |     |              |  +--rw duration?          uint32
      |     |     |              +--:(end-date-time)
      |     |     |                 +--rw end-date-time?
      |     |     |                         yang:date-and-time
      |     |     +--:(independent-send-accept-lifetime)
      |     |        |   {independent-send-accept-lifetime}?
      |     |        +--rw send-lifetime
      |     |        |  +--rw (lifetime)?
      |     |        |     +--:(always)
      |     |        |     |  +--rw always?            empty
      |     |        |     +--:(start-end-time)
      |     |        |        +--rw start-date-time?
      |     |        |        |       yang:date-and-time
      |     |        |        +--rw (end-time)?
      |     |        |           +--:(infinite)
      |     |        |           |  +--rw no-end-time?       empty
      |     |        |           +--:(duration)
      |     |        |           |  +--rw duration?          uint32
      |     |        |           +--:(end-date-time)
      |     |        |              +--rw end-date-time?
      |     |        |                      yang:date-and-time
      |     |        +--rw accept-lifetime
      |     |           +--rw (lifetime)?



RFC 8177                     YANG Key Chain                    June 2017


      |     |              +--:(always)
      |     |              |  +--rw always?            empty
      |     |              +--:(start-end-time)
      |     |                 +--rw start-date-time?
      |     |                 |       yang:date-and-time
      |     |                 +--rw (end-time)?
      |     |                    +--:(infinite)
      |     |                    |  +--rw no-end-time?       empty
      |     |                    +--:(duration)
      |     |                    |  +--rw duration?          uint32
      |     |                    +--:(end-date-time)
      |     |                       +--rw end-date-time?
      |     |                               yang:date-and-time
      |     +--rw crypto-algorithm identityref
      |     +--rw key-string
      |     |  +--rw (key-string-style)?
      |     |     +--:(keystring)
      |     |     |  +--rw keystring?            string
      |     |     +--:(hexadecimal) {hex-key-string}?
      |     |        +--rw hexadecimal-string?   yang:hex-string
      |     +--ro send-lifetime-active?     boolean
      |     +--ro accept-lifetime-active?   boolean
      +--rw aes-key-wrap {aes-key-wrap}?
         +--rw enable?   boolean

4.  Key Chain YANG Model

   <CODE BEGINS> file "ietf-key-chain@2017-06-15.yang"
   module ietf-key-chain {
     yang-version 1.1;
     namespace "urn:ietf:params:xml:ns:yang:ietf-key-chain";
     prefix key-chain;

     import ietf-yang-types {
       prefix yang;
     }
     import ietf-netconf-acm {
       prefix nacm;
     }

     organization
       "IETF RTGWG - Routing Area Working Group";
     contact
       "WG Web:   <https://datatracker.ietf.org/group/rtgwg>
        WG List:  <mailto:rtgwg@ietf.org>

        Editor: Acee Lindem
                <mailto:acee@cisco.com>



RFC 8177                     YANG Key Chain                    June 2017


                Yingzhen Qu
                <mailto:yingzhen.qu@huawei.com>
                Derek Yeung
                <mailto:derek@arrcus.com>
                Ing-Wher Chen
                <mailto:Ing-Wher_Chen@jabail.com>
                Jeffrey Zhang
                <mailto:zzhang@juniper.net>";

     description
       "This YANG module defines the generic configuration
        data for key chains.  It is intended that the module
        will be extended by vendors to define vendor-specific
        key chain configuration parameters.

        Copyright (c) 2017 IETF Trust and the persons identified as
        authors of the code.  All rights reserved.

        Redistribution and use in source and binary forms, with or
        without modification, is permitted pursuant to, and subject
        to the license terms contained in, the Simplified BSD License
        set forth in Section 4.c of the IETF Trust's Legal Provisions
        Relating to IETF Documents
        (http://trustee.ietf.org/license-info).

        This version of this YANG module is part of RFC 8177;
        see the RFC itself for full legal notices.";

     reference "RFC 8177";

     revision 2017-06-15 {
       description
         "Initial RFC Revision";
       reference "RFC 8177: YANG Data Model for Key Chains";
     }

     feature hex-key-string {
       description
         "Support hexadecimal key string.";
     }

     feature accept-tolerance {
       description
         "Support the tolerance or acceptance limit.";
     }

     feature independent-send-accept-lifetime {
       description



RFC 8177                     YANG Key Chain                    June 2017


         "Support for independent send and accept key lifetimes.";
     }

     feature crypto-hmac-sha-1-12 {
       description
         "Support for TCP HMAC-SHA-1 12-byte digest hack.";
     }

     feature cleartext {
       description
         "Support for cleartext algorithm.  Usage is
          NOT RECOMMENDED.";
     }

     feature aes-cmac-prf-128 {
       description
         "Support for AES Cipher-based Message Authentication
          Code Pseudorandom Function.";
     }

     feature aes-key-wrap {
       description
         "Support for Advanced Encryption Standard (AES) Key Wrap.";
     }

     feature replay-protection-only {
       description
         "Provide replay protection without any authentication
          as required by protocols such as Bidirectional
          Forwarding Detection (BFD).";
     }
     identity crypto-algorithm {
       description
         "Base identity of cryptographic algorithm options.";
     }

     identity hmac-sha-1-12 {
       base crypto-algorithm;
       if-feature "crypto-hmac-sha-1-12";
       description
         "The HMAC-SHA1-12 algorithm.";
     }

     identity aes-cmac-prf-128 {
       base crypto-algorithm;
       if-feature "aes-cmac-prf-128";
       description
         "The AES-CMAC-PRF-128 algorithm - required by



RFC 8177                     YANG Key Chain                    June 2017


          RFC 5926 for TCP-AO key derivation functions.";
     }

     identity md5 {
       base crypto-algorithm;
       description
         "The MD5 algorithm.";
     }

     identity sha-1 {
       base crypto-algorithm;
       description
         "The SHA-1 algorithm.";
     }

     identity hmac-sha-1 {
       base crypto-algorithm;
       description
         "HMAC-SHA-1 authentication algorithm.";
     }

     identity hmac-sha-256 {
       base crypto-algorithm;
       description
         "HMAC-SHA-256 authentication algorithm.";
     }

     identity hmac-sha-384 {
       base crypto-algorithm;
       description
         "HMAC-SHA-384 authentication algorithm.";
     }

     identity hmac-sha-512 {
       base crypto-algorithm;
       description
         "HMAC-SHA-512 authentication algorithm.";
     }

     identity cleartext {
       base crypto-algorithm;
       if-feature "cleartext";
       description
         "cleartext.";
     }

     identity replay-protection-only {
       base crypto-algorithm;



RFC 8177                     YANG Key Chain                    June 2017


       if-feature "replay-protection-only";
       description
         "Provide replay protection without any authentication as
          required by protocols such as Bidirectional Forwarding
          Detection (BFD).";
     }

     typedef key-chain-ref {
       type leafref {
         path
         "/key-chain:key-chains/key-chain:key-chain/key-chain:name";
       }
       description
         "This type is used by data models that need to reference
          configured key chains.";
     }

     grouping lifetime {
       description
         "Key lifetime specification.";
       choice lifetime {
         default "always";
         description
           "Options for specifying key accept or send lifetimes";
         case always {
           leaf always {
             type empty;
             description
               "Indicates key lifetime is always valid.";
           }
         }
         case start-end-time {
           leaf start-date-time {
             type yang:date-and-time;
             description
               "Start time.";
           }
           choice end-time {
             default "infinite";
             description
               "End-time setting.";
             case infinite {
               leaf no-end-time {
                 type empty;
                 description
                   "Indicates key lifetime end-time is infinite.";
               }
             }



RFC 8177                     YANG Key Chain                    June 2017


             case duration {
               leaf duration {
                 type uint32 {
                   range "1..2147483646";
                 }
                 units "seconds";
                 description
                   "Key lifetime duration, in seconds";
               }
             }
             case end-date-time {
               leaf end-date-time {
                 type yang:date-and-time;
                 description
                   "End time.";
               }
             }
           }
         }
       }
     }

     container key-chains {
       description
         "All configured key-chains on the device.";
       list key-chain {
         key "name";
         description
           "List of key-chains.";
         leaf name {
           type string;
           description
             "Name of the key-chain.";
         }
         leaf description {
           type string;
           description
             "A description of the key-chain";
         }
         container accept-tolerance {
           if-feature "accept-tolerance";
           description
             "Tolerance for key lifetime acceptance (seconds).";
           leaf duration {
             type uint32;
             units "seconds";
             default "0";
             description



RFC 8177                     YANG Key Chain                    June 2017


               "Tolerance range, in seconds.";
           }
         }
         leaf last-modified-timestamp {
           type yang:date-and-time;
           config false;
           description
             "Timestamp of the most recent update to the key-chain";
         }
         list key {
           key "key-id";
           description
             "Single key in key chain.";
           leaf key-id {
             type uint64;
             description
               "Numeric value uniquely identifying the key";
           }
           container lifetime {
             description
               "Specify a key's lifetime.";
             choice lifetime {
               description
                 "Options for specification of send and accept
                  lifetimes.";
               case send-and-accept-lifetime {
                 description
                   "Send and accept key have the same lifetime.";
                 container send-accept-lifetime {
                   description
                     "Single lifetime specification for both
                      send and accept lifetimes.";
                   uses lifetime;
                 }
               }
               case independent-send-accept-lifetime {
                 if-feature "independent-send-accept-lifetime";
                 description
                   "Independent send and accept key lifetimes.";
                 container send-lifetime {
                   description
                     "Separate lifetime specification for send
                      lifetime.";
                   uses lifetime;
                 }
                 container accept-lifetime {
                   description
                     "Separate lifetime specification for accept



RFC 8177                     YANG Key Chain                    June 2017


                      lifetime.";
                   uses lifetime;
                 }
               }
             }
           }
           leaf crypto-algorithm {
             type identityref {
               base crypto-algorithm;
             }
             mandatory true;
             description
               "Cryptographic algorithm associated with key.";
           }
           container key-string {
             description
               "The key string.";
             nacm:default-deny-all;
             choice key-string-style {
               description
                 "Key string styles";
                case keystring {
                  leaf keystring {
                   type string;
                   description
                     "Key string in ASCII format.";
                 }
               }
               case hexadecimal {
                 if-feature "hex-key-string";
                 leaf hexadecimal-string {
                   type yang:hex-string;
                   description
                     "Key in hexadecimal string format.  When compared
                      to ASCII, specification in hexadecimal affords
                      greater key entropy with the same number of
                      internal key-string octets.  Additionally, it
                      discourages usage of well-known words or
                      numbers.";
                 }
               }
             }
           }
           leaf send-lifetime-active {
             type boolean;
             config false;
             description
               "Indicates if the send lifetime of the



RFC 8177                     YANG Key Chain                    June 2017


                key-chain key is currently active.";
              }
           leaf accept-lifetime-active {
             type boolean;
             config false;
             description
               "Indicates if the accept lifetime of the
                key-chain key is currently active.";
           }
         }
       }
       container aes-key-wrap {
         if-feature "aes-key-wrap";
         description
           "AES Key Wrap encryption for key-chain key-strings.  The
            encrypted key-strings are encoded as hexadecimal key
            strings using the hex-key-string leaf.";
         leaf enable {
           type boolean;
           default "false";
           description
             "Enable AES Key Wrap encryption.";
         }
       }
     }
   }
   <CODE ENDS>

5.  Security Considerations

   The YANG module defined in this document is designed to be accessed
   via network management protocols such as NETCONF [NETCONF] or
   RESTCONF [RESTCONF].  The lowest NETCONF layer is the secure
   transport layer, and the mandatory-to-implement secure transport is
   Secure Shell (SSH) [NETCONF-SSH].  The lowest RESTCONF layer is
   HTTPS, and the mandatory-to-implement secure transport is TLS [TLS].

   The NETCONF access control model [NETCONF-ACM] provides the means to
   restrict access for particular NETCONF or RESTCONF users to a pre-
   configured subset of all available NETCONF or RESTCONF protocol
   operations and content.  The key strings are not accessible by
   default, and NETCONF access control model [NETCONF-ACM] rules are
   required to configure or retrieve them.

   When configured, the key strings can be encrypted using the AES Key
   Wrap algorithm [AES-KEY-WRAP].  The AES key-encryption key (KEK) is
   not included in the YANG model and must be set or derived independent
   of key chain configuration.  When AES key encryption is used, the



RFC 8177                     YANG Key Chain                    June 2017


   hex-key-string feature is also required since the encrypted keys will
   contain characters that are not representable in the YANG string
   built-in type [YANG-1.1].  It is RECOMMENDED that key strings be
   encrypted using AES key encryption to prevent key chains from being
   retrieved and stored with the key strings in cleartext.  This
   recommendation is independent of the access protection that is
   availed from the NETCONF access control model (NACM) [NETCONF-ACM].

   The cleartext algorithm is included as a YANG feature.  Usage is NOT
   RECOMMENDED except in cases where the application and device have no
   other alternative (e.g., a legacy network device that must
   authenticate packets at intervals of 10 milliseconds or less for many
   peers using Bidirectional Forwarding Detection [BFD]).  Keys used
   with the cleartext algorithm are considered insecure and SHOULD NOT
   be reused with more secure algorithms.

   Similarly, the MD5 and SHA-1 algorithms have been proven to be
   insecure ([Dobb96a], [Dobb96b], and [SHA-SEC-CON]), and usage is NOT
   RECOMMENDED.  Usage should be confined to deployments where it is
   required for backward compatibility.

   Implementations with keys provided via this model should store them
   using best current security practices.

6.  IANA Considerations

   This document registers a URI in the "IETF XML Registry"
   [XML-REGISTRY].  It follows the format in [XML-REGISTRY].

      URI: urn:ietf:params:xml:ns:yang:ietf-key-chain
      Registrant Contact: The IESG.
      XML: N/A, the requested URI is an XML namespace.

   This document registers a YANG module in the "YANG Module Names"
   registry [YANG-1.0].

      name: ietf-key-chain
      namespace: urn:ietf:params:xml:ns:yang:ietf-key-chain
      prefix: key-chain
      reference: RFC 8177











RFC 8177                     YANG Key Chain                    June 2017


7.  References

7.1.  Normative References

   [KEYWORDS]
              Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <http://www.rfc-editor.org/info/rfc2119>.

   [KEYWORDS-UPD]
              Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <http://www.rfc-editor.org/info/rfc8174>.

   [NETCONF]  Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed.,
              and A. Bierman, Ed., "Network Configuration Protocol
              (NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011,
              <http://www.rfc-editor.org/info/rfc6241>.

   [NETCONF-ACM]
              Bierman, A. and M. Bjorklund, "Network Configuration
              Protocol (NETCONF) Access Control Model", RFC 6536,
              DOI 10.17487/RFC6536, March 2012,
              <http://www.rfc-editor.org/info/rfc6536>.

   [NETCONF-SSH]
              Wasserman, M., "Using the NETCONF Protocol over Secure
              Shell (SSH)", RFC 6242, DOI 10.17487/RFC6242, June 2011,
              <http://www.rfc-editor.org/info/rfc6242>.

   [RESTCONF]
              Bierman, A., Bjorklund, M., and K. Watsen, "RESTCONF
              Protocol", RFC 8040, DOI 10.17487/RFC8040, January 2017,
              <http://www.rfc-editor.org/info/rfc8040>.

   [TLS]      Dierks, T. and E. Rescorla, "The Transport Layer Security
              (TLS) Protocol Version 1.2", RFC 5246,
              DOI 10.17487/RFC5246, August 2008,
              <http://www.rfc-editor.org/info/rfc5246>.

   [XML-REGISTRY]
              Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
              DOI 10.17487/RFC3688, January 2004,
              <http://www.rfc-editor.org/info/rfc3688>.






RFC 8177                     YANG Key Chain                    June 2017


   [YANG-1.0]
              Bjorklund, M., Ed., "YANG - A Data Modeling Language for
              the Network Configuration Protocol (NETCONF)", RFC 6020,
              DOI 10.17487/RFC6020, October 2010,
              <http://www.rfc-editor.org/info/rfc6020>.

   [YANG-1.1]
              Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language",
              RFC 7950, DOI 10.17487/RFC7950, August 2016,
              <http://www.rfc-editor.org/info/rfc7950>.

7.2.  Informative References

   [AES-KEY-WRAP]
              Housley, R. and M. Dworkin, "Advanced Encryption Standard
              (AES) Key Wrap with Padding Algorithm", RFC 5649,
              DOI 10.17487/RFC5649, September 2009,
              <http://www.rfc-editor.org/info/rfc5649>.

   [BFD]      Katz, D. and D. Ward, "Bidirectional Forwarding Detection
              (BFD)", RFC 5880, DOI 10.17487/RFC5880, June 2010,
              <http://www.rfc-editor.org/info/rfc5880>.

   [CRYPTO-KEYTABLE]
              Housley, R., Polk, T., Hartman, S., and D. Zhang,
              "Database of Long-Lived Symmetric Cryptographic Keys",
              RFC 7210, DOI 10.17487/RFC7210, April 2014,
              <http://www.rfc-editor.org/info/rfc7210>.

   [Dobb96a]  Dobbertin, H., "Cryptanalysis of MD5 Compress", Technical
              Report Presented at the Rump Session of EuroCrypt '96, May
              1996.

   [Dobb96b]  Dobbertin, H., "The Status of MD5 After a Recent Attack",
              CryptoBytes, Vol. 2, No. 2, Summer 1996.

   [IAB-REPORT]
              Andersson, L., Davies, E., and L. Zhang, "Report from the
              IAB workshop on Unwanted Traffic March 9-10, 2006",
              RFC 4948, DOI 10.17487/RFC4948, August 2007,
              <http://www.rfc-editor.org/info/rfc4948>.

   [NMDA]     Bjorklund, M., Schoenwaelder, J., Shafer, P., Watsen, K.,
              and R. Wilton, "Network Management Datastore
              Architecture", Work in Progress, draft-ietf-netmod-
              revised-datastores-02, May 2017.





RFC 8177                     YANG Key Chain                    June 2017


   [NTP-PROTO]
              Mills, D., Martin, J., Ed., Burbank, J., and W. Kasch,
              "Network Time Protocol Version 4: Protocol and Algorithms
              Specification", RFC 5905, DOI 10.17487/RFC5905, June 2010,
              <http://www.rfc-editor.org/info/rfc5905>.

   [OSPFV3-AUTH]
              Bhatia, M., Manral, V., and A. Lindem, "Supporting
              Authentication Trailer for OSPFv3", RFC 7166,
              DOI 10.17487/RFC7166, March 2014,
              <http://www.rfc-editor.org/info/rfc7166>.

   [SHA-SEC-CON]
              Polk, T., Chen, L., Turner, S., and P. Hoffman, "Security
              Considerations for the SHA-0 and SHA-1 Message-Digest
              Algorithms", RFC 6194, DOI 10.17487/RFC6194, March 2011,
              <http://www.rfc-editor.org/info/rfc6194>.

   [TCP-AO]   Touch, J., Mankin, A., and R. Bonica, "The TCP
              Authentication Option", RFC 5925, DOI 10.17487/RFC5925,
              June 2010, <http://www.rfc-editor.org/info/rfc5925>.

   [TCP-AO-ALGORITHMS]
              Lebovitz, G. and E. Rescorla, "Cryptographic Algorithms
              for the TCP Authentication Option (TCP-AO)", RFC 5926,
              DOI 10.17487/RFC5926, June 2010,
              <http://www.rfc-editor.org/info/rfc5926>.

   [YANG-CRYPTO-KEYTABLE]
              Chen, I., "YANG Data Model for RFC 7210 Key Table", Work
              in Progress, draft-chen-rtg-key-table-yang-00, March 2015.




















RFC 8177                     YANG Key Chain                    June 2017


Appendix A.  Examples

A.1.  Simple Key Chain with an Always Valid Single Key

   <?xml version="1.0" encoding="utf-8"?>
   <data xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
     <key-chains xmlns="urn:ietf:params:xml:ns:yang:ietf-key-chain">
       <key-chain>
         <name>keychain-no-end-time</name>
         <description>
           A key chain with a single key that is always valid for
           transmission and reception.
         </description>
         <key>
           <key-id>100</key-id>
           <lifetime>
             <send-accept-lifetime>
               <always/>
             </send-accept-lifetime>
           </lifetime>
           <crypto-algorithm>hmac-sha-256</crypto-algorithm>
           <key-string>
             <keystring>keystring_in_ascii_100</keystring>
           </key-string>
         </key>
       </key-chain>
     </key-chains>
   </data>

A.2.  Key Chain with Keys Having Different Lifetimes

   <?xml version="1.0" encoding="utf-8"?>
   <data xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
     <key-chains xmlns="urn:ietf:params:xml:ns:yang:ietf-key-chain">
       <key-chain>
         <name>keychain2</name>
         <description>
           A key chain where each key contains a different send time
           and accept time and a different algorithm illustrating
           algorithm agility.
         </description>
         <key>
           <key-id>35</key-id>
           <lifetime>
             <send-lifetime>
               <start-date-time>2017-01-01T00:00:00Z</start-date-time>
               <end-date-time>2017-02-01T00:00:00Z</end-date-time>
             </send-lifetime>



RFC 8177                     YANG Key Chain                    June 2017


             <accept-lifetime>
               <start-date-time>2016-12-31T23:59:55Z</start-date-time>
               <end-date-time>2017-02-01T00:00:05Z</end-date-time>
             </accept-lifetime>
           </lifetime>
           <crypto-algorithm>hmac-sha-256</crypto-algorithm>
           <key-string>
             <keystring>keystring_in_ascii_35</keystring>
           </key-string>
         </key>
         <key>
           <key-id>36</key-id>
           <lifetime>
             <send-lifetime>
               <start-date-time>2017-02-01T00:00:00Z</start-date-time>
               <end-date-time>2017-03-01T00:00:00Z</end-date-time>
             </send-lifetime>
             <accept-lifetime>
               <start-date-time>2017-01-31T23:59:55Z</start-date-time>
               <end-date-time>2017-03-01T00:00:05Z</end-date-time>
             </accept-lifetime>
           </lifetime>
           <crypto-algorithm>hmac-sha-512</crypto-algorithm>
           <key-string>
             <hexadecimal-string>fe:ed:be:af:36</hexadecimal-string>
           </key-string>
         </key>
       </key-chain>
     </key-chains>
   </data>





















RFC 8177                     YANG Key Chain                    June 2017


A.3.  Key Chain with Independent Send and Accept Lifetimes

   <?xml version="1.0" encoding="utf-8"?>
   <data xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
     <key-chains xmlns="urn:ietf:params:xml:ns:yang:ietf-key-chain">
       <key-chain>
         <name>keychain2</name>
         <description>
           A key chain where each key contains different send times
           and accept times.
         </description>
         <key>
           <key-id>35</key-id>
           <lifetime>
             <send-lifetime>
               <start-date-time>2017-01-01T00:00:00Z</start-date-time>
               <end-date-time>2017-02-01T00:00:00Z</end-date-time>
             </send-lifetime>
             <accept-lifetime>
               <start-date-time>2016-12-31T23:59:55Z</start-date-time>
               <end-date-time>2017-02-01T00:00:05Z</end-date-time>
             </accept-lifetime>
           </lifetime>
           <crypto-algorithm>hmac-sha-256</crypto-algorithm>
           <key-string>
             <keystring>keystring_in_ascii_35</keystring>
           </key-string>
         </key>
         <key>
           <key-id>36</key-id>
           <lifetime>
             <send-lifetime>
               <start-date-time>2017-02-01T00:00:00Z</start-date-time>
               <end-date-time>2017-03-01T00:00:00Z</end-date-time>
             </send-lifetime>
             <accept-lifetime>
               <start-date-time>2017-01-31T23:59:55Z</start-date-time>
               <end-date-time>2017-03-01T00:00:05Z</end-date-time>
             </accept-lifetime>
           </lifetime>
           <crypto-algorithm>hmac-sha-256</crypto-algorithm>
           <key-string>
             <hexadecimal-string>fe:ed:be:af:36</hexadecimal-string>
           </key-string>
         </key>
       </key-chain>
     </key-chains>
   </data>



RFC 8177                     YANG Key Chain                    June 2017


Contributors

   Yi Yang
   SockRate

   Email: yi.yang@sockrate.com

Acknowledgments

   Thanks to Brian Weis for fruitful discussions on security
   requirements.

   Thanks to Ines Robles for Routing Directorate QA review comments.

   Thanks to Ladislav Lhotka for YANG Doctor comments.

   Thanks to Martin Bjorklund for additional YANG Doctor comments.

   Thanks to Tom Petch for comments during IETF last call.

   Thanks to Matthew Miller for comments made during the Gen-ART review.

   Thanks to Vincent Roca for comments made during the Security
   Directorate review.

   Thanks to Warren Kumari, Ben Campbell, Adam Roach, and Benoit Claise
   for comments received during the IESG review.
























RFC 8177                     YANG Key Chain                    June 2017


Authors' Addresses

   Acee Lindem (editor)
   Cisco Systems
   301 Midenhall Way
   Cary, NC  27513
   United States of America

   Email: acee@cisco.com


   Yingzhen Qu
   Huawei

   Email: yingzhen.qu@huawei.com


   Derek Yeung
   Arrcus, Inc

   Email: derek@arrcus.com


   Ing-Wher Chen
   Jabil

   Email: Ing-Wher_Chen@jabil.com


   Jeffrey Zhang
   Juniper Networks
   10 Technology Park Drive
   Westford, MA  01886
   United States of America

   Email: zzhang@juniper.net