| Rfc | 6766 |
|---|
| Title | xDSL Multi-Pair Bonding Using Time-Division Inverse Multiplexing
(G.Bond/TDIM) MIB |
|---|
| Author | E. Beili |
|---|
| Date | February 2013 |
|---|
| Format: | TXT, HTML |
|---|
| Status: | PROPOSED STANDARD |
|---|
|
Internet Engineering Task Force (IETF) E. Beili
Request for Comments: 6766 Actelis Networks
Category: Standards Track February 2013
ISSN: 2070-1721
xDSL Multi-Pair Bonding
Using Time-Division Inverse Multiplexing (G.Bond/TDIM) MIB
Abstract
This document defines a Management Information Base (MIB) module for
use with network management protocols in TCP/IP-based internets.
This document proposes an extension to the GBOND-MIB module with a
set of objects for managing multi-pair bonded xDSL interfaces using
Time-Division Inverse Multiplexing (TDIM), as defined in ITU-T
Recommendation G.998.3.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 5741.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
http://www.rfc-editor.org/info/rfc6766.
Copyright Notice
Copyright (c) 2013 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction ....................................................2
2. The Internet-Standard Management Framework ......................3
3. The Broadband Forum Management Framework for xDSL Bonding .......3
4. Relationship to Other MIB Modules ...............................3
4.1. Relationship to the Interfaces Group MIB Module ............3
4.2. Relationship to the G.Bond MIB Module ......................3
5. MIB Structure ...................................................4
5.1. Overview ...................................................4
5.2. Link Protection Configuration ..............................4
5.3. Service Configuration ......................................5
5.3.1. Management of TDM Services and Service Drop
Priority during Bandwidth Degradation ...............6
5.3.2. Service Notifications ...............................6
5.4. Performance Monitoring .....................................7
5.5. Mapping of Broadband Forum TR-159 and ITU-T G.998.3
Managed Objects ............................................7
6. G.Bond/TDIM MIB Definitions ....................................10
7. Security Considerations ........................................51
8. IANA Considerations ............................................53
9. Acknowledgments ................................................53
10. References ....................................................53
10.1. Normative References .....................................53
10.2. Informative References ...................................54
1. Introduction
Multi-pair bonding using Time-Division Inverse Multiplexing (TDIM),
a.k.a. G.Bond/TDIM, is specified in ITU-T Recommendation G.998.3
[G.998.3], which defines a method for bonding (or aggregating)
multiple xDSL lines (or individual bearer channels in multiple xDSL
lines) into a single bidirectional logical link carrying a mix of
various traffic streams, e.g., Ethernet, Asynchronous Transfer Mode
(ATM), Time-Division Multiplexing (TDM).
The MIB module defined in this document provides G.Bond/TDIM-specific
objects for the management of G.998.3 bonded interfaces, extending
the common bonding objects specified in the GBOND-MIB [RFC6765]
module.
2. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP).
Objects in the MIB are defined using the mechanisms defined in the
Structure of Management Information (SMI). This memo specifies a MIB
module that is compliant to the SMIv2, which is described in STD 58,
RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
[RFC2580].
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in
BCP 14, RFC 2119 [RFC2119].
3. The Broadband Forum Management Framework for xDSL Bonding
This document makes use of the Broadband Forum technical report
"Management Framework for xDSL Bonding" [TR-159], defining a
management model and a hierarchy of management objects for the bonded
xDSL interfaces.
4. Relationship to Other MIB Modules
This section outlines the relationship of the MIB modules defined in
this document with other MIB modules described in the relevant RFCs.
Specifically, the following MIB modules are discussed: the Interfaces
Group MIB (IF-MIB) and the G.Bond MIB (GBOND-MIB).
4.1. Relationship to the Interfaces Group MIB Module
A G.Bond/TDIM port is a private case of a bonded multi-pair xDSL
interface and as such is managed using generic interface management
objects defined in the IF-MIB [RFC2863]. In particular, an interface
index (ifIndex) is used to index instances of G.Bond/TDIM ports, as
well as xDSL lines/channels, in a managed system.
4.2. Relationship to the G.Bond MIB Module
The GBOND-MIB module [RFC6765] defines management objects common for
all bonded multi-pair xDSL interfaces. In particular, it describes
the bonding management, bonded port and channel configuration,
initialization sequence, etc.
Both the GBOND-MIB and G9983-MIB modules are REQUIRED to manage a
G.Bond/TDIM port.
5. MIB Structure
5.1. Overview
All management objects defined in the G9983-MIB module are contained
in a single group g9983Port. This group is further split into 6
sub-groups, structured as recommended by RFC 4181 [RFC4181]:
o g9983PortNotifications - containing notifications (TDIM Service
'down'/'up').
o g9983PortConfTable - containing objects for configuration of a
G.Bond/TDIM port.
o g9983PortCapTable - containing objects reflecting capabilities of
a G.Bond/TDIM port.
o g9983PortStatTable - containing objects providing overall status
information of a G.Bond/TDIM port, complementing the generic
status information from the ifTable of the IF-MIB and the
gBondPortStatFltStatus of GBOND-MIB.
o g9983SvcTable - containing objects for configuration and status of
the services in a G.Bond/TDIM port.
o g9983PM - containing objects for OPTIONAL historical Performance
Monitoring (PM) of a G.Bond/TDIM port.
5.2. Link Protection Configuration
The G.Bond/TDIM specification allows an optional Forward Error
Correction (FEC) and Interleaver block, which if supported and
enabled provides a degree of protection against micro-interruptions,
alien noise, and even individual Bonding Channel Entity (BCE)
failures, a.k.a. cut-line protection.
Management objects in the g9983PortConfTable can be used to configure
and query the FEC and Interleaver function of the G.Bond/TDIM port.
5.3. Service Configuration
Unlike the other two xDSL Multi-Pair Bonding schemes (G.Bond/ATM and
G.Bond/Ethernet), which send the information required for reassembly
of the fragmented data along with the data, G.Bond/TDIM is a
synchronous scheme, requiring both ends to know the data distribution
tables before any actual data transfer can happen.
Management objects in the g9983PortConfTable
(g9983PortConfAdminServices), g9983SvcTable, and g9983OperSvcTable
can be used to configure and query the configuration of services
transported via the G.Bond/TDIM link. The services may be configured
independently of the link state (i.e., in-service and out-of-
service), as G.998.3 communicates changes in the service
configuration via specific Bonding Communication Channel (BCC)
messages, switching both ends of the link to the new configuration
synchronously.
There can be up to 60 active services defined on a G.Bond/TDIM link.
This MIB module provides an ability to define up to 255 services via
the g9983SvcTable, with each row representing a possible service, and
then set the actual service configuration using the
g9983PortConfAdminServices object (a byte-vector of service indices),
listing the active services in the order of their position in the
G.Bond/TDIM frame. This design allows one to easily modify service
drop priority, which directly corresponds to the service position.
The actual list of services is provided via the read-only
g9983OperSvcTable, where each entry's index corresponds to the
service position, starting from index 1 for the first entry, 2 for
the second entry, etc., providing an easy service navigation for a
management application using GET-NEXT (instead of counting bytes in
the g9983PortConfAdminServices object).
The service configuration can only be changed on a Bonding
Terminating Unit at the Central Office (BTU-C).
When configuring the services, please bear in mind that the sum of
all the services' bandwidth SHOULD be less than or equal to the
target data rate of the bonded link. Note that G.Bond/TDIM links are
symmetrical; i.e., their upstream data rate equals the downstream
data rate.
5.3.1. Management of TDM Services and Service Drop Priority during
Bandwidth Degradation
The G.Bond/TDIM protocol provides an ability to map TDM services into
the TDIM bonded link directly, without any additional overhead. It
addresses only structure-agnostic TDM transport, disregarding any
structure that may be imposed on these streams, in particular, the
structure imposed by the standard TDM framing [G.704].
During bandwidth degradation, services with a lower priority are
impaired or dropped first. Synchronous services (fractional DS1/E1,
clear channel E1/T1, T3/E3, clock) that are positioned in the
beginning of the G.Bond/TDIM frame have higher priority than
asynchronous services (Ethernet, ATM, Generic Framing Procedure (GFP)
encapsulated) that are positioned farther away. Within the services
of the same type, those with a lower position (index) have higher
priority.
5.3.2. Service Notifications
This MIB module provides specific 'up'/'down' notifications
(g9983SvcUp/g9983SvcDown) for each of the configured services.
During bandwidth degradation, a number of services may be suspended
(dropped) simultaneously, according to their drop priority (position
in the service list). Please note that it is possible for a higher-
priority service to be dropped before a lower-priority one. For
example, suppose there are two services configured on a 2-Mbps
G.Bond/TDIM link: a T1 service (g9983SvcType with a value of ds1,
with a bandwidth requirement of 1.5 Mbps), and an Ethernet service
with a size of 0.5 Mbps. When the actual link bandwidth is reduced
to 1.4 Mbps, the T1 service with a g9983OperSvcPosition value of 1
would be dropped, while the Ethernet service with a
g9983OperSvcPosition value of 2 would remain up.
Notifications SHOULD be rate-limited (throttled) such that there is
an implementation-specific gap between the generation of consecutive
notifications of the same event. This mechanism prevents
"notification flooding" in cases where g9983OperSvcState oscillates
between the 'up' and 'down' states. When notifications are rate-
limited, they are dropped and not queued for sending at a future
time. This is intended to be a general rate-limiting statement for
notifications that otherwise have no explicit rate-limiting
assertions in this document.
5.4. Performance Monitoring
The OPTIONAL Performance Monitoring counters, thresholds, and history
buckets (interval-counters), similar to those defined in [TR-159],
are implemented using the textual conventions defined in the
HC-PerfHist-TC-MIB [RFC3705]. The HC-PerfHist-TC-MIB defines 64-bit
versions of the textual conventions found in the PerfHist-TC-MIB
[RFC3593].
The agent SHOULD align the beginning of each interval to a fifteen-
minute boundary of a wall clock. Likewise, the beginning of each
one-day interval SHOULD be aligned with the start of a day.
Counters are not reset when a G.Bond TDIM port is re-initialized, but
rather only when the agent is reset or re-initialized.
Note that the accumulation of certain performance events for a
monitored entity is inhibited (counting stops) during periods of
service unavailability on that entity. The DESCRIPTION clause of
Performance Monitoring counters in this MIB module specifies which of
the counters are inhibited during periods of service unavailability.
5.5. Mapping of Broadband Forum TR-159 and ITU-T G.998.3 Managed
Objects
This section contains the mapping between relevant managed objects
(attributes) defined in [TR-159] and the managed objects defined in
this document. Note that all management objects defined in [G.998.3]
have corresponding objects in [TR-159].
+------------------------------+---------------------------------------+
| TR-159 Managed Object | Corresponding SNMP Object |
+------------------------------+---------------------------------------+
| oBondTDIM - Basic Package | |
| (Mandatory) | |
+------------------------------+---------------------------------------+
| aCRC4Errors | g9983PortStatCrc4Errors |
+------------------------------+---------------------------------------+
| aCRC6Errors | g9983PortStatCrc6Errors |
+------------------------------+---------------------------------------+
| aCRC8Errors | g9983PortStatCrc8Errors |
+------------------------------+---------------------------------------+
| aFECSupported | g9983PortCapFecSupported |
+------------------------------+---------------------------------------+
+------------------------------+---------------------------------------+
| oBondTDIM - FEC Package | |
| (Optional) | |
+------------------------------+---------------------------------------+
| aFECAdminState | g9983PortConfFecAdminState |
+------------------------------+---------------------------------------+
| aFECOperState | g9983PortStatFecOperState |
+------------------------------+---------------------------------------+
| aFECWordSize | g9983PortConfFecWordSize |
+------------------------------+---------------------------------------+
| aFECRedundancySize | g9983PortConfFecRedundancySize |
+------------------------------+---------------------------------------+
| aFECInterleaverType | g9983PortConfFecInterleaverType |
+------------------------------+---------------------------------------+
| aFECInterleaverDepth | g9983PortConfFecInterleaverDepth |
+------------------------------+---------------------------------------+
| aFECMaxWordSize | g9983PortCapFecMaxWordSize |
+------------------------------+---------------------------------------+
| aFECMaxRedundancySize | g9983PortCapFecMaxRedundancySize |
+------------------------------+---------------------------------------+
| aFECInterleaverTypesSupported|g9983PortCapFecInterleaverTypeSupported|
+------------------------------+---------------------------------------+
| aFECMaxInterleaverDepth | g9983PortCapFecMaxInterleaverDepth |
+------------------------------+---------------------------------------+
| oTDIMService - Basic | |
| Package (Mandatory) | |
+------------------------------+---------------------------------------+
| aServiceID | g9983OperSvcPosition |
+------------------------------+---------------------------------------+
| aServiceIfIdx | g9983SvcIfIdx |
+------------------------------+---------------------------------------+
| aServiceType | g9983SvcType |
+------------------------------+---------------------------------------+
| aServiceSize | g9983SvcSize |
+------------------------------+---------------------------------------+
| aServiceOperState | g9983OperSvcState |
+------------------------------+---------------------------------------+
| aServiceUpDownEnable | g9983PortConfSvcUpDownEnable |
+------------------------------+---------------------------------------+
| nServiceUp | g9983SvcUp |
+------------------------------+---------------------------------------+
| nServiceDown | g9983SvcDown |
+------------------------------+---------------------------------------+
Table 1: Mapping of TR-159 Managed Objects
Note that some of the mapping between the objects defined in TR-159
and the ones defined in this MIB module is not one-to-one; for
example, while TR-159 PM attributes aGroupPerf* map to the
corresponding gBondPortPm* objects of the GBOND-MIB module, there are
no dedicated PM attributes for the g9983PortPm* and g9983SvcPm*
objects introduced in this MIB module. However, since their
definition is identical to the definition of gBondPortPm* objects of
the GBOND-MIB module, we can map g9983PortPm* and g9983SvcPm* to the
relevant aGroupPerf* attributes of TR-159 and use the term 'partial
mapping' to denote the fact that this mapping is not one-to-one.
6. G.Bond/TDIM MIB Definitions
The G9983-MIB module IMPORTS objects from SNMPv2-SMI [RFC2578],
SNMPv2-TC [RFC2579], SNMPv2-CONF [RFC2580], IF-MIB [RFC2863], and
HC-PerfHist-TC-MIB [RFC3705]. The module has been structured as
recommended by [RFC4181].
G9983-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
mib-2,
Unsigned32,
Counter32
FROM SNMPv2-SMI -- RFC 2578
TEXTUAL-CONVENTION,
RowStatus,
TruthValue
FROM SNMPv2-TC -- RFC 2579
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF -- RFC 2580
ifIndex,
InterfaceIndex
FROM IF-MIB -- RFC 2863
HCPerfCurrentCount,
HCPerfIntervalCount,
HCPerfValidIntervals,
HCPerfInvalidIntervals,
HCPerfTimeElapsed
FROM HC-PerfHist-TC-MIB -- RFC 3705
;
------------------------------------------------------------------------
g9983MIB MODULE-IDENTITY
LAST-UPDATED "201302200000Z" -- 20 February 2013
ORGANIZATION "IETF ADSL MIB Working Group"
CONTACT-INFO
"WG charter:
http://datatracker.ietf.org/wg/adslmib/charter/
Mailing Lists:
General Discussion: adslmib@ietf.org
To Subscribe: adslmib-request@ietf.org
In Body: subscribe your_email_address
Chair: Menachem Dodge
Postal: ECI Telecom, Ltd.
30 Hasivim St.
Petach-Tikva 4951169
Israel
Phone: +972-3-926-8421
EMail: menachemdodge1@gmail.com
Editor: Edward Beili
Postal: Actelis Networks, Inc.
25 Bazel St., P.O.B. 10173
Petach-Tikva 49103
Israel
Phone: +972-3-924-3491
EMail: edward.beili@actelis.com"
DESCRIPTION
"The objects in this MIB module are used to manage the
multi-pair bonded xDSL interfaces using time-division inverse
multiplexing (TDIM), as defined in ITU-T Recommendation G.998.3
(G.Bond/TDIM).
This MIB module MUST be used in conjunction with the GBOND-MIB
module, common to all G.Bond technologies.
The following references are used throughout this MIB module:
[G.998.3] refers to:
ITU-T Recommendation G.998.3: 'Multi-pair bonding using
time-division inverse multiplexing', January 2005.
[TR-159] refers to:
Broadband Forum Technical Report: 'Management Framework for
xDSL Bonding', December 2008.
Naming Conventions:
BCE - Bonding Channel Entity
BTU - Bonding Terminating Unit
BTU-C - Bonding Terminating Unit, CO side
BTU-R - Bonding Terminating Unit, Remote Terminal (CPE) side
CO - Central Office
CPE - Customer Premises Equipment
GBS - Generic Bonding Sub-layer
GBS-C - Generic Bonding Sub-layer, CO side
GBS-R - Generic Bonding Sub-layer, Remote Terminal (CPE) side
SNR - Signal to Noise Ratio
Copyright (c) 2013 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, is permitted pursuant to, and subject to the license
terms contained in, the Simplified BSD License set forth in Section
4.c of the IETF Trust's Legal Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info)."
REVISION "201302200000Z" -- 20 February 2013
DESCRIPTION "Initial version, published as RFC 6766."
::= { mib-2 210 }
-- Sections of the module
-- Structured as recommended by RFC 4181, Appendix D
g9983Objects OBJECT IDENTIFIER ::= { g9983MIB 1 }
g9983Conformance OBJECT IDENTIFIER ::= { g9983MIB 2 }
-- Groups in the module
g9983Port OBJECT IDENTIFIER ::= { g9983Objects 1 }
-- Textual Conventions
G9983SvcIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each service defined
in the managed G.Bond/TDIM port.
It is RECOMMENDED that values be assigned contiguously
starting from 1. The value for each service MUST remain
constant at least from one re-initialization of the local
management subsystem to the next re-initialization."
SYNTAX Unsigned32 (1..255)
G9983SvcIndexList ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1d:"
STATUS current
DESCRIPTION
"This textual convention represents a continuous ordered list of
all the services defined for the managed G.Bond/TDIM port.
The value of this object is a concatenation of zero or more (up
to 60) octets, where each octet contains an 8-bit
G9983SvcIndex value, identifying a particular service.
An octet's position reflects the associated service position
and its priority in the G.Bond/TDIM frame, with the first octet
being the first service of highest priority.
A zero-length octet string is object-specific and MUST
therefore be defined as part of the description of any object
that uses this syntax. Examples of the usage of a zero-length
value might include situations where an object using this
textual convention is irrelevant for a specific G.Bond/TDIM port
type or where no services have been defined for this port."
SYNTAX OCTET STRING (SIZE (0..60))
G9983SvcOrderIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A unique value, greater than zero, for each service defined
in the managed G.Bond/TDIM port, showing its relative position
inside the G.Bond/TDIM frame."
SYNTAX Unsigned32 (1..60)
-- Port Notifications group
g9983PortNotifications OBJECT IDENTIFIER
::= { g9983Port 0 }
g9983SvcUp NOTIFICATION-TYPE
OBJECTS {
-- ifIndex and g9983OperSvcPosition would be part of the trap OID
g9983OperSvcIdx,
g9983SvcIfIdx
}
STATUS current
DESCRIPTION
"This notification indicates that a service, indicated by the
g9983OperSvcIdx (mapped to a particular interface
indicated by the g9983SvcIfIdx), in a particular
G.Bond/TDIM port is passing traffic.
This notification is generated (unless disabled or dropped by
the rate-limiting mechanism) when the g9983OperSvcState
object has left the 'down' state, while the G.Bond/TDIM port
state (the ifOperStatus of the IF-MIB) is 'up'.
Generation of this notification is controlled by the
g9983PortConfSvcUpDownEnable object.
This object maps to the TR-159 notification nServiceUp."
REFERENCE
"[TR-159], Section 5.5.5.7"
::= { g9983PortNotifications 1 }
g9983SvcDown NOTIFICATION-TYPE
OBJECTS {
-- ifIndex and g9983OperSvcPosition would be part of the trap OID
g9983OperSvcIdx,
g9983SvcIfIdx
}
STATUS current
DESCRIPTION
"This notification indicates that a service indicated by the
g9983OperSvcIdx (mapped to a particular interface
indicated by the g9983SvcIfIdx) in a particular
G.Bond/TDIM port has stopped passing traffic.
This notification is generated (unless disabled or dropped by
the rate-limiting mechanism), when the g9983OperSvcState
object has entered the 'down' state, while the G.Bond/TDIM port
state (the ifOperStatus of the IF-MIB) is 'up'.
Generation of this notification is controlled by the
g9983PortConfSvcUpDownEnable object.
This object maps to the TR-159 notification nServiceDown."
REFERENCE
"[TR-159], Section 5.5.5.8"
::= { g9983PortNotifications 2 }
-- G.Bond/TDIM Port group
g9983PortConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF G9983PortConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for configuration of G.Bond/TDIM ports. Entries in
this table MUST be maintained in a persistent manner."
::= { g9983Port 1 }
g9983PortConfEntry OBJECT-TYPE
SYNTAX G9983PortConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Port Configuration table.
Each entry represents a G.Bond/TDIM port indexed by the
ifIndex. Additional configuration parameters are available
via the gBondPortConfEntry of the GBOND-MIB.
Note that a G.Bond/TDIM port runs on top of a single or
multiple BCE port(s), which are also indexed by the ifIndex."
INDEX { ifIndex }
::= { g9983PortConfTable 1 }
G9983PortConfEntry ::=
SEQUENCE {
g9983PortConfFecAdminState TruthValue,
g9983PortConfFecWordSize Unsigned32,
g9983PortConfFecRedundancySize Unsigned32,
g9983PortConfFecInterleaverType INTEGER,
g9983PortConfFecInterleaverDepth Unsigned32,
g9983PortConfAdminServices G9983SvcIndexList,
g9983PortConfSvcUpDownEnable TruthValue
}
g9983PortConfFecAdminState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A desired state of the OPTIONAL Forward Error Correction
(FEC) function of the G.Bond/TDIM port.
A value of 'false' indicates that the FEC function SHALL be
disabled. A value of 'true' indicates that the FEC function
SHALL be enabled, if supported by the G.Bond/TDIM port, as
indicated by the g9983PortCapFecSupported object.
The g9983PortStatFecOperState object indicates the current
operational state of the FEC function.
For the GBS-R ports, the value of this object cannot be changed
directly. This value may be changed as a result of a write
operation on the g9983PortCapFecSupported object of a remote
GBS-C.
Modifications of this object MUST be performed when the link
is 'down'.
Attempts to change this object MUST be rejected if the link is
'up' or initializing, or if it is a GBS-R.
This object maps to the TR-159/G.998.3 attribute aFECAdminState."
REFERENCE
"[TR-159], Section 5.5.4.5; [G.998.3], Appendix II, B-X"
::= { g9983PortConfEntry 1 }
g9983PortConfFecWordSize OBJECT-TYPE
SYNTAX Unsigned32 (0|20..255)
UNITS "octets"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A FEC code word size, in octets, for G.Bond/TDIM ports
supporting the FEC function.
This object is read-write for the GBS-C ports and read-only
for the GBS-R.
A value of zero SHALL be returned if the FEC function is
disabled (via g9983PortConfFecAdminState) or not supported.
Changing of the FEC code word size MUST be performed when the
FEC-enabled link is 'down'. Attempts to change this object MUST
be rejected if the link is 'up' or initializing or if the
FEC function is disabled/not supported.
This object maps to the TR-159/G.998.3 attribute aFECWordSize."
REFERENCE
"[TR-159], Section 5.5.4.7; [G.998.3], Appendix II, B-XI"
::= { g9983PortConfEntry 2 }
g9983PortConfFecRedundancySize OBJECT-TYPE
SYNTAX Unsigned32 (0|2|4|8|16|20)
UNITS "octets"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A FEC redundancy word size, in octets, for G.Bond/TDIM
ports supporting the FEC function.
This object is read-write for the GBS-C ports and read-only
for the GBS-R.
A value of zero SHALL be returned if the FEC function is
disabled (via g9983PortConfFecAdminState) or not supported.
Changing of the FEC redundancy word size MUST be performed
when the FEC-enabled link is 'down'. Attempts to change this
object MUST be rejected if the link is 'up' or initializing or
if the FEC function is disabled/not supported.
This object maps to the TR-159/G.998.3 attribute
aFECRedundancySize."
REFERENCE
"[TR-159], Section 5.5.4.8; [G.998.3], Appendix II, B-XII"
::= { g9983PortConfEntry 3 }
g9983PortConfFecInterleaverType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
block(1),
convolution(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An Interleaver type for G.Bond/TDIM ports supporting the
FEC function.
This object is read-write for the GBS-C ports and read-only
for the GBS-R.
A value of none(0) SHALL be returned if the FEC function is
disabled (via g9983PortConfFecAdminState) or not supported.
Changing of the Interleaver type MUST be performed when the
FEC-enabled link is 'down'. Attempts to change this object MUST
be rejected if the link is 'up' or initializing or if the FEC
function is disabled/not supported.
This object maps to the TR-159/G.998.3 attribute
aFECInterleaverType."
REFERENCE
"[TR-159], Section 5.5.4.9; [G.998.3], Appendix II, B-XIII"
::= { g9983PortConfEntry 4 }
g9983PortConfFecInterleaverDepth OBJECT-TYPE
SYNTAX Unsigned32 (0|1|2|3|4|6|8|12|16|24|32|48|96)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An Interleaver depth for G.Bond/TDIM ports supporting the
FEC function.
This object is read-write for the GBS-C ports and read-only
for the GBS-R.
A value of zero SHALL be returned if the FEC function is
disabled (via g9983PortConfFecAdminState) or not supported.
Changing of the Interleaver depth MUST be performed when the
FEC-enabled link is 'down'. Attempts to change this object MUST
be rejected if the link is 'up' or initializing or if the FEC
function is disabled/not supported.
This object maps to the TR-159/G.998.3 attribute
aFECInterleaverDepth."
REFERENCE
"[TR-159], Section 5.5.4.10; [G.998.3], Appendix II, B-XIV"
::= { g9983PortConfEntry 5 }
g9983PortConfAdminServices OBJECT-TYPE
SYNTAX G9983SvcIndexList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Desired list of services for a G.Bond/TDIM port. This object
is a list of pointers to entries in the g9983SvcTable.
The value of this object is a continuous ordered list of up to
60 indices (g9983SvcIdx) of the active services carried
via the G.Bond/TDIM link. The position of a service in the
list determines its relative priority in cases of bandwidth
degradation -- the priority decreases towards the end of the
list, which means that the last service in the list would be
suspended first when the bandwidth degrades.
This object is writable and readable for the GBS-C ports.
It is irrelevant for the GBS-R ports -- a zero-length octet
string SHALL be returned on an attempt to read this object, and
an attempt to change this object MUST be rejected in this case.
Note that the current operational service list is available
via the g9983OperSvcTable object.
This object for a GBS-C port MAY be modified independently of
the link's state, i.e., in-service and out-of-service.
Attempts to set this object to a list with a member value that
is not the value of the index for an active entry in the
corresponding g9983SvcTable table MUST be rejected."
REFERENCE
"[G.998.3], Sections 10.2.3, 13.3.4.6-13.3.4.11"
::= { g9983PortConfEntry 6 }
g9983PortConfSvcUpDownEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether g9983SvcUp and g9983SvcDown
notifications should be generated for this interface.
A value of true(1) indicates that the notifications are enabled.
A value of false(2) indicates that the notifications are
disabled.
This object maps to the TR-159 attribute
aServiceUpDownEnable."
REFERENCE
"[TR-159], Section 5.5.5.6"
::= { g9983PortConfEntry 7 }
g9983PortCapTable OBJECT-TYPE
SYNTAX SEQUENCE OF G9983PortCapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for capabilities of G.Bond/TDIM ports. Entries in this
table MUST be maintained in a persistent manner."
::= { g9983Port 2 }
g9983PortCapEntry OBJECT-TYPE
SYNTAX G9983PortCapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Port Capability table.
Each entry represents a G.Bond/TDIM port indexed by the
ifIndex. Additional capabilities are available via the
gBondPortCapabilityEntry of the GBOND-MIB.
Note that a G.Bond/TDIM port runs on top of a single
or multiple BCE port(s), which are also indexed by the ifIndex."
INDEX { ifIndex }
::= { g9983PortCapTable 1 }
G9983PortCapEntry ::=
SEQUENCE {
g9983PortCapFecSupported TruthValue,
g9983PortCapFecMaxWordSize Unsigned32,
g9983PortCapFecMaxRedundancySize Unsigned32,
g9983PortCapFecInterleaverTypeSupported INTEGER,
g9983PortCapFecMaxInterleaverDepth Unsigned32
}
g9983PortCapFecSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"FEC and Interleaver capability of the G.Bond/TDIM port.
This object has a value of true(1) when the port supports the
FEC and Interleaver function.
A value of false(2) is returned when the port does not
support the FEC and Interleaver function.
This object maps to the TR-159/G.998.3 attribute
aFECSupported."
REFERENCE
"[TR-159], Section 5.5.4.4; [G.998.3], Appendix II, B-VI"
::= { g9983PortCapEntry 1 }
g9983PortCapFecMaxWordSize OBJECT-TYPE
SYNTAX Unsigned32 (0|20..255)
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A maximum supported FEC code word size, in octets, for
G.Bond/TDIM ports supporting the FEC function.
A value of zero SHALL be returned if the FEC function is not
supported.
This object maps to the TR-159 attribute aFECWordSize."
REFERENCE
"[TR-159], Section 5.5.4.11; [G.998.3], Appendix II, B-XI"
::= { g9983PortCapEntry 2 }
g9983PortCapFecMaxRedundancySize OBJECT-TYPE
SYNTAX Unsigned32 (0|2|4|8|16|20)
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A maximum supported FEC redundancy word size, in octets, for
G.Bond/TDIM ports supporting the FEC function.
A value of zero SHALL be returned if the FEC function is not
supported.
This object maps to the TR-159 attribute
aFECMaxRedundancySize."
REFERENCE
"[TR-159], Section 5.5.4.12; [G.998.3], Appendix II, B-XII"
::= { g9983PortCapEntry 3 }
g9983PortCapFecInterleaverTypeSupported OBJECT-TYPE
SYNTAX INTEGER {
none(0),
block(1),
convolution(2),
blockConvolution(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Supported Interleaver types for G.Bond/TDIM ports supporting
the FEC function.
Possible values are:
none - the port does not support interleaving
block - the port supports Block Interleaver
convolution - the port supports Convolution Interleaver
blockConvolution - the port supports both Block Interleaver
and Convolution Interleaver
This object maps to the TR-159 attribute
aFECInterleaverTypesSupported."
REFERENCE
"[TR-159], Section 5.5.4.13; [G.998.3], Appendix II, B-XIII"
::= { g9983PortCapEntry 4 }
g9983PortCapFecMaxInterleaverDepth OBJECT-TYPE
SYNTAX Unsigned32 (0|1|2|3|4|6|8|12|16|24|32|48|96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A maximum Interleaver depth for G.Bond/TDIM ports supporting
the FEC function.
A value of zero SHALL be returned if the Interleaver is not
supported.
This object maps to the TR-159 attribute
aFECMaxInterleaverDepth."
REFERENCE
"[TR-159], Section 5.5.4.14; [G.998.3], Appendix II, B-XIV"
::= { g9983PortCapEntry 5 }
g9983PortStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF G9983PortStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides overall status information of G.Bond
TDIM ports, complementing the generic status information from
the ifTable of the IF-MIB and the gBondPortStatFltStatus of
the GBOND-MIB. Additional status information about connected
BCEs is available from the relevant line MIBs.
This table contains live data from the equipment. As such,
it is NOT persistent."
::= { g9983Port 3 }
g9983PortStatEntry OBJECT-TYPE
SYNTAX G9983PortStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Port Status table.
Each entry represents a G.Bond/TDIM port indexed by the
ifIndex.
Note that a G.Bond GBS port runs on top of a single
or multiple BCE port(s), which are also indexed by the ifIndex."
INDEX { ifIndex }
::= { g9983PortStatTable 1 }
G9983PortStatEntry ::=
SEQUENCE {
g9983PortStatFecOperState TruthValue,
g9983PortStatFltStatus BITS,
g9983PortStatCrc4Errors Counter32,
g9983PortStatCrc6Errors Counter32,
g9983PortStatCrc8Errors Counter32
}
g9983PortStatFecOperState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only value indicating the current operational state
of the OPTIONAL Forward Error Correction (FEC) function for
the G.998.3 port.
A value of 'false' indicates that the FEC function is
disabled. A value of 'true' indicates that the FEC function
is enabled (and supported).
This object maps to the TR-159 attribute aFECOperState."
REFERENCE
"[TR-159], Section 5.5.4.6"
::= { g9983PortStatEntry 1 }
g9983PortStatFltStatus OBJECT-TYPE
SYNTAX BITS {
serviceDown(0),
wrongConfig(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G.Bond/TDIM port fault status. This is a bitmap of possible
conditions. The various bit positions are:
serviceDown - at least one of the services defined
for this aggregation group is down
(due to low rate).
wrongConfig - at least one BCE at the remote GBS-R
is already connected to another GBS.
This object is intended to supplement the ifOperStatus object
in the IF-MIB and the gBondPortStatFltStatus object in the
GBOND-MIB."
REFERENCE
"[G.998.3], Section 6.3; RFC 2863, IF-MIB, ifOperStatus;
RFC 6765, GBOND-MIB, gBondPortStatFltStatus"
::= { g9983PortStatEntry 2 }
g9983PortStatCrc4Errors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CRC-4 errors (frame header errors) on all
pairs in the G.Bond/TDIM port. Simultaneous errors on M lines
SHOULD be counted M times.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times
as indicated by the value of ifCounterDiscontinuityTime as
defined in the IF-MIB.
This object maps to the TR-159/G.998.3 attribute aCRC4Errors."
REFERENCE
"[TR-159], Section 5.5.4.1; [G.998.3], Appendix II, B-VII"
::= { g9983PortStatEntry 3 }
g9983PortStatCrc6Errors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CRC-6 errors (super-frame errors) on all
pairs in the G.Bond/TDIM port. Simultaneous errors on M lines
SHOULD be counted 1 time.
Discontinuities in the value of this counter can occur at
re-initialization of the local management subsystem, and at
other times as indicated by the value of
ifCounterDiscontinuityTime as defined in the IF-MIB.
This object maps to the TR-159/G.998.3 attribute aCRC6Errors."
REFERENCE
"[TR-159], Section 5.5.4.2; [G.998.3], Appendix II, B-VIII"
::= { g9983PortStatEntry 4 }
g9983PortStatCrc8Errors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CRC-8 errors (event/message errors) on all
pairs in the G.Bond/TDIM port. Simultaneous errors on M lines
SHOULD be counted M times.
Discontinuities in the value of this counter can occur at
re-initialization of the local management subsystem, and at
other times as indicated by the value of
ifCounterDiscontinuityTime as defined in the IF-MIB.
This object maps to the TR-159/G.998.3 attribute aCRC8Errors."
REFERENCE
"[TR-159], Section 5.5.4.3; [G.998.3], Appendix II, B-IX"
::= { g9983PortStatEntry 5 }
g9983OperSvcTable OBJECT-TYPE
SYNTAX SEQUENCE OF G9983OperSvcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of the operational services configured on a G.Bond/TDIM
port. This table reflects current actual service configuration,
set by the g9983PortConfAdminServices object. The number of
entries (services) in this table therefore can vary between
0, when no services are configured, and 60, for the maximum
number of services.
This table contains live data from the equipment. As such,
it is NOT persistent."
::= { g9983Port 4 }
g9983OperSvcEntry OBJECT-TYPE
SYNTAX G9983OperSvcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Port Operational Service table,
containing the index of an active service entry in the
g9983SvcTable. The entry is indexed by the ifIndex,
indicating a corresponding G.Bond/TDIM port, and by
g9983OperSvcPosition (1..60), indicating the
corresponding service position in the G.Bond/TDIM frame."
INDEX { ifIndex, g9983OperSvcPosition }
::= { g9983OperSvcTable 1 }
G9983OperSvcEntry ::=
SEQUENCE {
g9983OperSvcPosition G9983SvcOrderIndex,
g9983OperSvcIdx G9983SvcIndex,
g9983OperSvcState INTEGER
}
g9983OperSvcPosition OBJECT-TYPE
SYNTAX G9983SvcOrderIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"G.Bond/TDIM operational service position -- a unique index,
indicating relative placement of the associated service
pointed to by g9983OperSvcIdx, within the G.Bond/TDIM frame.
There can be up to 60 services defined over a TDIM bonded
facility. Services with lower indices have higher priority in
cases of bandwidth degradation.
The value of g9983OperSvcPosition for the first
g9983OperSvcEntry is always 1, incrementing sequentially
for each consecutive entry, i.e., 2 for the second entry,
3 for the third, etc.
This objects maps to the TR-159/G.998.3 attribute aServiceID."
REFERENCE
"[TR-159], Section 5.5.5.1; [G.998.3], Appendix II, C-I"
::= { g9983OperSvcEntry 1 }
g9983OperSvcIdx OBJECT-TYPE
SYNTAX G9983SvcIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G.Bond/TDIM operational service index -- a read-only pointer
to an existing entry in the g9983SvcTable (value of
g9983SvcIdx) describing a particular service."
::= { g9983OperSvcEntry 2 }
g9983OperSvcState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G.Bond/TDIM service operational state.
Possible values are:
up - Service is up and passing traffic.
down - Service is down, due to a variety of
reasons, e.g., G.Bond/TDIM port is
down, current link bandwidth is too
low to support a particular service,
etc.
This objects maps to the TR-159 attribute aServiceOperState."
REFERENCE
"[TR-159], Section 5.5.5.5"
::= { g9983OperSvcEntry 3 }
g9983SvcTable OBJECT-TYPE
SYNTAX SEQUENCE OF G9983SvcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of possible services for G.Bond/TDIM ports.
Entries in this table MUST be maintained in a persistent
manner."
::= { g9983Port 5 }
g9983SvcEntry OBJECT-TYPE
SYNTAX G9983SvcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Port Service table, containing
the management information applicable to a particular service,
indexed by the g9983SvcIdx, on a G.Bond/TDIM port,
indexed by the ifIndex."
INDEX { ifIndex, g9983SvcIdx }
::= { g9983SvcTable 1 }
G9983SvcEntry ::=
SEQUENCE {
g9983SvcIdx G9983SvcIndex,
g9983SvcIfIdx InterfaceIndex,
g9983SvcType INTEGER,
g9983SvcSize Unsigned32,
g9983SvcRowStatus RowStatus
}
g9983SvcIdx OBJECT-TYPE
SYNTAX G9983SvcIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"G.Bond/TDIM service index -- a unique index associated with
a particular service entry."
::= { g9983SvcEntry 1 }
g9983SvcIfIdx OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is a unique index within the ifTable. It represents
the interface index of a service to be transmitted over the
G.Bond/TDIM service instance.
This objects maps to the TR-159 attribute aServiceIfIndex."
REFERENCE
"[TR-159], Section 5.5.5.2"
::= { g9983SvcEntry 2 }
g9983SvcType OBJECT-TYPE
SYNTAX INTEGER {
ds1(0),
e1(1),
nxds0(2),
nxe0(3),
ds3(4),
e3(5),
clock(6),
ethernet(7),
atm(8),
gfpNoFCS(9),
gfp(10)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"G.Bond/TDIM service type.
Possible values are:
ds1 - Clear Channel DS1 (synchronous)
e1 - Clear Channel E1 (synchronous)
nxds0 - Fractional DS1 (synchronous)
nxe0 - Fractional E1 (synchronous)
ds3 - DS3 (synchronous)
e3 - E3 (synchronous)
clock - Clock transfer (synchronous)
ethernet - Ethernet (asynchronous)
atm - ATM (asynchronous)
gfpNoFCS - GFP encapsulated without FCS (asynchronous)
gfp - GFP encapsulated with FCS (asynchronous)
For the GBS-R ports, the value of this object cannot be
changed directly. This value may be changed as a result of a
write operation on the g9983SvcType object of a remote GBS-C.
Attempts to change this object MUST be rejected for the GBS-R
ports.
This object maps to the TR-159/G.998.3 attribute aServiceType."
REFERENCE
"[TR-159], Section 5.5.5.3; [G.998.3], Appendix II, C-II"
::= { g9983SvcEntry 3 }
g9983SvcSize OBJECT-TYPE
SYNTAX Unsigned32 (0|20..255)
UNITS "octets"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Service size, in octets, per bonding sub-block for a specific
service identified by g9983SvcIdx.
For TDM (synchronous) services with variable size
(e.g., fractional DS1/E1), this object represents the number of
DS0/E0 channels.
For asynchronous services (Ethernet, ATM, GFPnoFCS, or GFP),
this object represents the maximum number of octets.
For non-fractional TDM services (i.e., DS1, E1, DS3, E3, and
clock), the value of this object MUST be 0.
A GET operation returns the current value.
A SET operation, allowed on GBS-C ports, changes the service
size to the indicated value. If the service type is a
fixed-rate synchronous service (g9983SvcType is nxds0, nxe0,
ds1, e1, ds3, e3, or clock), the operation MUST be rejected.
This object maps to the TR-159/G.998.3 attribute aServiceSize."
REFERENCE
"[TR-159], Section 5.5.5.4; [G.998.3], Appendix II, C-III"
::= { g9983SvcEntry 4 }
g9983SvcRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls the creation, modification, or deletion
of the associated entry in the g9983SvcTable per the
semantics of RowStatus.
If an 'active' entry is referenced via g9983OperSvcIdx
or a g9983PortConfAdminServices instance, or indexes a
g9983SvcPm*Entry, the entry MUST remain 'active'.
An 'active' entry SHALL NOT be modified. In order to modify an
existing entry, it MUST be taken out of service (by setting
this object to 'notInService'), modified, and set to 'active'
again."
::= { g9983SvcEntry 5 }
-------------------------------
-- Performance Monitoring group
-------------------------------
g9983PM OBJECT IDENTIFIER ::= { g9983Port 6 }
g9983PortPmCurTable OBJECT-TYPE
SYNTAX SEQUENCE OF G9983PortPmCurEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains current Performance Monitoring information
for a G.Bond/TDIM port. This table contains live data from the
equipment and as such is NOT persistent."
::= { g9983PM 1 }
g9983PortPmCurEntry OBJECT-TYPE
SYNTAX G9983PortPmCurEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Port PM table.
Each entry represents a G.Bond/TDIM port indexed by the
ifIndex."
INDEX { ifIndex }
::= { g9983PortPmCurTable 1 }
G9983PortPmCurEntry ::=
SEQUENCE {
g9983PortPmCur15MinValidIntervals HCPerfValidIntervals,
g9983PortPmCur15MinInvalidIntervals HCPerfInvalidIntervals,
g9983PortPmCur15MinTimeElapsed HCPerfTimeElapsed,
g9983PortPmCur15MinCrc4s HCPerfCurrentCount,
g9983PortPmCur15MinCrc6s HCPerfCurrentCount,
g9983PortPmCur15MinCrc8s HCPerfCurrentCount,
g9983PortPmCur1DayValidIntervals Unsigned32,
g9983PortPmCur1DayInvalidIntervals Unsigned32,
g9983PortPmCur1DayTimeElapsed HCPerfTimeElapsed,
g9983PortPmCur1DayCrc4s HCPerfCurrentCount,
g9983PortPmCur1DayCrc6s HCPerfCurrentCount,
g9983PortPmCur1DayCrc8s HCPerfCurrentCount
}
g9983PortPmCur15MinValidIntervals OBJECT-TYPE
SYNTAX HCPerfValidIntervals
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only number of 15-minute intervals for which the
performance data was collected. The value of this object will
be 96 or the maximum number of 15-minute history intervals
collected by the implementation, unless the measurement was
(re)started recently, in which case the value will be the
number of complete 15-minute intervals for which there are at
least some data.
In certain cases, it is possible that some intervals are
unavailable. In this case, this object reports the maximum
interval number for which data is available.
This object partially maps to the TR-159 attribute
aGroupPerf15MinValidIntervals."
REFERENCE
"[TR-159], Section 5.5.1.32"
::= { g9983PortPmCurEntry 1 }
g9983PortPmCur15MinInvalidIntervals OBJECT-TYPE
SYNTAX HCPerfInvalidIntervals
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only number of 15-minute intervals for which the
performance data was not always available. The value will
typically be zero, except in cases where the data for some
intervals are not available.
This object partially maps to the TR-159 attribute
aGroupPerf15MinInvalidIntervals."
REFERENCE
"[TR-159], Section 5.5.1.33"
::= { g9983PortPmCurEntry 2 }
g9983PortPmCur15MinTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds that have elapsed since the
beginning of the current 15-minute performance interval.
This object partially maps to the TR-159 attribute
aGroupPerfCurr15MinTimeElapsed."
REFERENCE
"[TR-159], Section 5.5.1.34"
::= { g9983PortPmCurEntry 3 }
g9983PortPmCur15MinCrc4s OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of CRC-4 errors (frame header errors) on all
active pairs in the G.Bond/TDIM port during the current
15-minute performance interval.
Simultaneous errors on M lines SHOULD be counted M times.
Note that the total number of CRC-4 errors is indicated by the
g9983PortStatCrc4Errors object.
This object is inhibited during Severely Errored Seconds (SES)
or Unavailable Seconds (UAS)."
REFERENCE
"[TR-159], Section 5.5.4.1"
::= { g9983PortPmCurEntry 4}
g9983PortPmCur15MinCrc6s OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of CRC-6 errors (super-frame errors) on all
active pairs in the G.Bond/TDIM port during the current
15-minute performance interval.
Simultaneous errors on M lines SHOULD be counted 1 time.
Note that the total number of CRC-6 errors is indicated by the
g9983PortStatCrc6Errors object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159], Section 5.5.4.2"
::= { g9983PortPmCurEntry 5}
g9983PortPmCur15MinCrc8s OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of CRC-8 errors (event/message errors) on all
active pairs in the G.Bond/TDIM port during the current
15-minute performance interval.
Simultaneous errors on M lines SHOULD be counted M times.
Note that the total number of CRC-8 errors is indicated by the
g9983PortStatCrc8Errors object.
This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
"[TR-159], Section 5.5.4.3"
::= { g9983PortPmCurEntry 6}
g9983PortPmCur1DayValidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only number of 1-day intervals for which data was
collected. The value of this object will be 7 or the maximum
number of 1-day history intervals collected by the
implementation, unless the measurement was (re)started recently,
in which case the value will be the number of complete 1-day
intervals for which there are at least some data.
In certain cases, it is possible that some intervals are
unavailable. In this case, this object reports the maximum
interval number for which data is available."
REFERENCE
"[TR-159], Section 5.5.1.45"
::= { g9983PortPmCurEntry 7 }
g9983PortPmCur1DayInvalidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only number of 1-day intervals for which data was
not always available. The value will typically be zero, except
in cases where the data for some intervals are not available."
REFERENCE
"[TR-159], Section 5.5.1.46"
::= { g9983PortPmCurEntry 8 }
g9983PortPmCur1DayTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds that have elapsed since the
beginning of the current 1-day performance interval."
REFERENCE
"[TR-159], Section 5.5.1.47"
::= { g9983PortPmCurEntry 9 }
g9983PortPmCur1DayCrc4s OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of CRC-4 errors on the G.Bond/TDIM port in
the current 1-day performance interval.
This object is inhibited during Severely Errored Seconds (SES)
and Unavailable Seconds (UAS)."
::= { g9983PortPmCurEntry 10 }
g9983PortPmCur1DayCrc6s OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of CRC-6 errors on the G.Bond/TDIM port
in the current 1-day performance interval.
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983PortPmCurEntry 11 }
g9983PortPmCur1DayCrc8s OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of CRC-8 errors on the G.Bond/TDIM port in
the current 1-day performance interval.
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983PortPmCurEntry 12 }
-- Port PM history: 15-min buckets
g9983PortPm15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF G9983PortPm15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains historical 15-minute buckets of Performance
Monitoring information for a G.Bond/TDIM port (a row for each
15-minute interval, up to 96 intervals).
Entries in this table MUST be maintained in a persistent manner."
::= { g9983PM 2 }
g9983PortPm15MinEntry OBJECT-TYPE
SYNTAX G9983PortPm15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Port historical 15-minute PM table.
Each entry represents Performance Monitoring data for a G.Bond
TDIM port, indexed by the ifIndex, collected during a particular
15-minute interval, indexed by the
g9983PortPm15MinIntervalIndex."
INDEX { ifIndex, g9983PortPm15MinIntervalIndex }
::= { g9983PortPm15MinTable 1 }
G9983PortPm15MinEntry ::=
SEQUENCE {
g9983PortPm15MinIntervalIndex Unsigned32,
g9983PortPm15MinIntervalMoniTime HCPerfTimeElapsed,
g9983PortPm15MinIntervalCrc4s HCPerfIntervalCount,
g9983PortPm15MinIntervalCrc6s HCPerfIntervalCount,
g9983PortPm15MinIntervalCrc8s HCPerfIntervalCount,
g9983PortPm15MinIntervalValid TruthValue
}
g9983PortPm15MinIntervalIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Performance data interval number. 1 is the most recent
previous interval; interval 96 is 24 hours ago.
Intervals 2..96 are OPTIONAL.
This object partially maps to the TR-159 attribute
aGroupPerf15MinIntervalNumber."
REFERENCE
"[TR-159], Section 5.5.1.57"
::= { g9983PortPm15MinEntry 1 }
g9983PortPm15MinIntervalMoniTime OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds over which the performance data
was actually monitored. This value will be the same as the
interval duration (900 seconds), except in a situation where
performance data could not be collected for any reason."
::= { g9983PortPm15MinEntry 2 }
g9983PortPm15MinIntervalCrc4s OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of CRC-4 errors on the G.Bond/TDIM port
during the 15-minute performance history interval.
This object is inhibited during Severely Errored Seconds (SES)
and Unavailable Seconds (UAS)."
::= { g9983PortPm15MinEntry 3 }
g9983PortPm15MinIntervalCrc6s OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of CRC-6 errors on the G.Bond/TDIM port
during the 15-minute performance history interval.
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983PortPm15MinEntry 4 }
g9983PortPm15MinIntervalCrc8s OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of CRC-8 errors on the G.Bond/TDIM port
during the current 15-minute performance interval.
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983PortPm15MinEntry 5 }
g9983PortPm15MinIntervalValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only object indicating whether or not this history
bucket contains valid data. A valid bucket is reported as
true(1) and an invalid bucket as false(2).
If this history bucket is invalid, the BTU-C MUST NOT produce
notifications based upon the value of the counters in this
bucket.
Note that an implementation may decide not to store invalid
history buckets in its database. In such a case, this object
is not required, as only valid history buckets are available
while invalid history buckets are simply not in the database.
This object partially maps to the TR-159 attribute
aGroupPerf15MinIntervalValid."
REFERENCE
"[TR-159], Section 5.5.1.58"
::= { g9983PortPm15MinEntry 6 }
-- Port PM history: 1-day buckets
g9983PortPm1DayTable OBJECT-TYPE
SYNTAX SEQUENCE OF G9983PortPm1DayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains historical 1-day buckets of Performance
Monitoring information for a G.Bond/TDIM port (a row for each
1-day interval, up to 7 intervals).
Entries in this table MUST be maintained in a persistent manner."
::= { g9983PM 3 }
g9983PortPm1DayEntry OBJECT-TYPE
SYNTAX G9983PortPm1DayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Port historical 1-day PM table.
Each entry represents Performance Monitoring data for such a
port, indexed by the ifIndex, collected during a particular
1-day interval, indexed by the g9983PortPm1DayIntervalIndex."
INDEX { ifIndex, g9983PortPm1DayIntervalIndex }
::= { g9983PortPm1DayTable 1 }
G9983PortPm1DayEntry ::=
SEQUENCE {
g9983PortPm1DayIntervalIndex Unsigned32,
g9983PortPm1DayIntervalMoniTime HCPerfTimeElapsed,
g9983PortPm1DayIntervalCrc4s HCPerfIntervalCount,
g9983PortPm1DayIntervalCrc6s HCPerfIntervalCount,
g9983PortPm1DayIntervalCrc8s HCPerfIntervalCount,
g9983PortPm1DayIntervalValid TruthValue
}
g9983PortPm1DayIntervalIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Performance data interval number. 1 is the most recent
previous interval; interval 7 is 7 days ago.
Intervals 2..7 are OPTIONAL.
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalNumber."
REFERENCE
"[TR-159], Section 5.5.1.62"
::= { g9983PortPm1DayEntry 1 }
g9983PortPm1DayIntervalMoniTime OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds over which the performance data
was actually monitored. This value will be the same as the
interval duration (86400 seconds), except in a situation where
performance data could not be collected for any reason.
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalMoniSecs."
REFERENCE
"[TR-159], Section 5.5.1.64"
::= { g9983PortPm1DayEntry 2 }
g9983PortPm1DayIntervalCrc4s OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of CRC-4 errors on the G.Bond/TDIM port
during the 1-day performance history interval.
This object is inhibited during Severely Errored Seconds (SES)
and Unavailable Seconds (UAS)."
::= { g9983PortPm1DayEntry 3 }
g9983PortPm1DayIntervalCrc6s OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of CRC-6 errors on the G.Bond/TDIM port
during the 1-day performance history interval.
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983PortPm1DayEntry 4 }
g9983PortPm1DayIntervalCrc8s OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of CRC-8 errors on the G.Bond/TDIM port
during the current 1-day performance interval.
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983PortPm1DayEntry 5 }
g9983PortPm1DayIntervalValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only object indicating whether or not this history
bucket contains valid data. A valid bucket is reported as
true(1) and an invalid bucket as false(2).
If this history bucket is invalid, the BTU-C MUST NOT produce
notifications based upon the value of the counters in this
bucket.
Note that an implementation may decide not to store invalid
history buckets in its database. In such a case, this object
is not required, as only valid history buckets are available
while invalid history buckets are simply not in the database.
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalValid."
REFERENCE
"[TR-159], Section 5.5.1.63"
::= { g9983PortPm1DayEntry 6 }
-- Services PM
g9983SvcPmCurTable OBJECT-TYPE
SYNTAX SEQUENCE OF G9983SvcPmCurEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains current Performance Monitoring information
for the services of a G.Bond/TDIM port.
This table contains live data from the equipment and as such is
NOT persistent."
::= { g9983PM 4 }
g9983SvcPmCurEntry OBJECT-TYPE
SYNTAX G9983SvcPmCurEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Services PM table.
Each entry represents a service, indexed by the
g9983SvcIdx, in a G.Bond/TDIM port, indexed by the
ifIndex."
INDEX { ifIndex, g9983SvcIdx }
::= { g9983SvcPmCurTable 1 }
G9983SvcPmCurEntry ::=
SEQUENCE {
g9983SvcPmCur15MinValidIntervals HCPerfValidIntervals,
g9983SvcPmCur15MinInvalidIntervals HCPerfInvalidIntervals,
g9983SvcPmCur15MinTimeElapsed HCPerfTimeElapsed,
g9983SvcPmCur15MinDowns HCPerfCurrentCount,
g9983SvcPmCur1DayValidIntervals Unsigned32,
g9983SvcPmCur1DayInvalidIntervals Unsigned32,
g9983SvcPmCur1DayTimeElapsed HCPerfTimeElapsed,
g9983SvcPmCur1DayDowns HCPerfCurrentCount
}
g9983SvcPmCur15MinValidIntervals OBJECT-TYPE
SYNTAX HCPerfValidIntervals
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only number of 15-minute intervals for which the
performance data was collected. The value of this object will
be 96 or the maximum number of 15-minute history intervals
collected by the implementation, unless the measurement was
(re)started recently, in which case the value will be the
number of complete 15-minute intervals for which there are at
least some data.
In certain cases, it is possible that some intervals are
unavailable. In this case, this object reports the maximum
interval number for which data is available.
This object partially maps to the TR-159 attribute
aGroupPerf15MinValidIntervals."
REFERENCE
"[TR-159], Section 5.5.1.32"
::= { g9983SvcPmCurEntry 1 }
g9983SvcPmCur15MinInvalidIntervals OBJECT-TYPE
SYNTAX HCPerfInvalidIntervals
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only number of 15-minute intervals for which the
performance data was not always available. The value will
typically be zero, except in cases where the data for some
intervals are not available.
This object partially maps to the TR-159 attribute
aGroupPerf15MinInvalidIntervals."
REFERENCE
"[TR-159], Section 5.5.1.33"
::= { g9983SvcPmCurEntry 2 }
g9983SvcPmCur15MinTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds that have elapsed since the
beginning of the current 15-minute performance interval.
This object partially maps to the TR-159 attribute
aGroupPerfCurr15MinTimeElapsed."
REFERENCE
"[TR-159], Section 5.5.1.34"
::= { g9983SvcPmCurEntry 3 }
g9983SvcPmCur15MinDowns OBJECT-TYPE
SYNTAX HCPerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds in the current 15-minute
performance interval during which a particular TDIM
service was 'down', as indicated by the
g9983OperSvcState object.
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983SvcPmCurEntry 4}
g9983SvcPmCur1DayValidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
UNITS "days"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only number of 1-day performance history intervals for
which the data was collected. The value of this object will be
7 or the maximum number of 1-day history intervals collected by
the implementation, unless the measurement was (re)started
recently, in which case the value will be the number of complete
1-day intervals for which there are at least some data.
In certain cases, it is possible that some intervals are
unavailable. In this case, this object reports the maximum
interval number for which data is available."
REFERENCE
"[TR-159], Section 5.5.1.45"
::= { g9983SvcPmCurEntry 5 }
g9983SvcPmCur1DayInvalidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
UNITS "days"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only number of 1-day performance history intervals for
which the performance data was not always available. The value
will typically be zero, except in cases where the data for some
intervals are not available."
REFERENCE
"[TR-159], Section 5.5.1.46"
::= { g9983SvcPmCurEntry 6 }
g9983SvcPmCur1DayTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds that have elapsed since the
beginning of the current 1-day performance interval."
REFERENCE
"[TR-159], Section 5.5.1.47"
::= { g9983SvcPmCurEntry 7 }
g9983SvcPmCur1DayDowns OBJECT-TYPE
SYNTAX HCPerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds in the current 1-day performance
interval during which a particular TDIM service was
'down', as indicated by the g9983OperSvcState object.
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983SvcPmCurEntry 8 }
-- Service PM history: 15-min buckets
g9983SvcPm15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF G9983SvcPm15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains historical 15-minute buckets of Performance
Monitoring information for the services of a G.Bond/TDIM port
(a multi-dimensional row for each 15-minute interval, up to 96
intervals).
Entries in this table MUST be maintained in a persistent manner."
::= { g9983PM 5 }
g9983SvcPm15MinEntry OBJECT-TYPE
SYNTAX G9983SvcPm15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Service historical 15-minute PM
table.
Each entry represents Performance Monitoring data for a
particular service, indexed by the g9983SvcIdx, in a G.Bond
TDIM port, indexed by the ifIndex, collected during a particular
15-minute interval, indexed by the
g9983SvcPm15MinIntervalIndex."
INDEX { ifIndex, g9983SvcIdx,
g9983SvcPm15MinIntervalIndex }
::= { g9983SvcPm15MinTable 1 }
G9983SvcPm15MinEntry ::=
SEQUENCE {
g9983SvcPm15MinIntervalIndex Unsigned32,
g9983SvcPm15MinIntervalMoniTime HCPerfTimeElapsed,
g9983SvcPm15MinIntervalDowns HCPerfIntervalCount,
g9983SvcPm15MinIntervalValid TruthValue
}
g9983SvcPm15MinIntervalIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Performance data interval number. 1 is the most recent
previous interval; interval 96 is 24 hours ago.
Intervals 2..96 are OPTIONAL.
This object partially maps to the TR-159 attribute
aGroupPerf15MinIntervalNumber."
REFERENCE
"[TR-159], Section 5.5.1.57"
::= { g9983SvcPm15MinEntry 1 }
g9983SvcPm15MinIntervalMoniTime OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds over which the performance data
was actually monitored. This value will be the same as the
interval duration (900 seconds), except in a situation where
performance data could not be collected for any reason."
::= { g9983SvcPm15MinEntry 2 }
g9983SvcPm15MinIntervalDowns OBJECT-TYPE
SYNTAX HCPerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds in the 15-minute performance
history interval during which a particular TDIM service was
'down', as indicated by the g9983OperSvcState object.
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983SvcPm15MinEntry 3 }
g9983SvcPm15MinIntervalValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only object indicating whether or not this history
bucket contains valid data. A valid bucket is reported as
true(1) and an invalid bucket as false(2).
If this history bucket is invalid, the BTU-C MUST NOT produce
notifications based upon the value of the counters in this
bucket.
Note that an implementation may decide not to store invalid
history buckets in its database. In such a case, this object
is not required, as only valid history buckets are available
while invalid history buckets are simply not in the database.
This object partially maps to the TR-159 attribute
aGroupPerf15MinIntervalValid."
REFERENCE
"[TR-159], Section 5.5.1.58"
::= { g9983SvcPm15MinEntry 4 }
-- Service PM history: 1-day buckets
g9983SvcPm1DayTable OBJECT-TYPE
SYNTAX SEQUENCE OF G9983SvcPm1DayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains historical 1-day buckets of Performance
Monitoring information for the services of a G.Bond/TDIM port
(a multi-dimensional row for each 1-day interval, up to 7
intervals).
Entries in this table MUST be maintained in a persistent manner."
::= { g9983PM 6 }
g9983SvcPm1DayEntry OBJECT-TYPE
SYNTAX G9983SvcPm1DayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond/TDIM Service historical 1-day PM table.
Each entry represents Performance Monitoring data for a
particular service, indexed by the g9983SvcIdx, defined in a
G.Bond/TDIM port, indexed by the ifIndex, collected during a
particular 1-day interval, indexed by the
g9983SvcPm1DayIntervalIndex."
INDEX { ifIndex, g9983SvcIdx,
g9983SvcPm1DayIntervalIndex }
::= { g9983SvcPm1DayTable 1 }
G9983SvcPm1DayEntry ::=
SEQUENCE {
g9983SvcPm1DayIntervalIndex Unsigned32,
g9983SvcPm1DayIntervalMoniTime HCPerfTimeElapsed,
g9983SvcPm1DayIntervalDowns HCPerfIntervalCount,
g9983SvcPm1DayIntervalValid TruthValue
}
g9983SvcPm1DayIntervalIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Performance data interval number. 1 is the most recent
previous interval; interval 7 is 7 days ago.
Intervals 2..7 are OPTIONAL.
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalNumber."
REFERENCE
"[TR-159], Section 5.5.1.62"
::= { g9983SvcPm1DayEntry 1 }
g9983SvcPm1DayIntervalMoniTime OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds over which the performance data
was actually monitored. This value will be the same as the
interval duration (86400 seconds), except in a situation where
performance data could not be collected for any reason.
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalMoniSecs."
REFERENCE
"[TR-159], Section 5.5.1.64"
::= { g9983SvcPm1DayEntry 2 }
g9983SvcPm1DayIntervalDowns OBJECT-TYPE
SYNTAX HCPerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only count of seconds in the 1-day performance history
interval during which a particular TDIM service was 'down',
as indicated by the g9983OperSvcState object.
This object is inhibited during Unavailable Seconds (UAS)."
::= { g9983SvcPm1DayEntry 3 }
g9983SvcPm1DayIntervalValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only object indicating whether or not this history
bucket contains valid data. A valid bucket is reported as
true(1) and an invalid bucket as false(2).
If this history bucket is invalid, the BTU-C MUST NOT produce
notifications based upon the value of the counters in this
bucket.
Note that an implementation may decide not to store invalid
history buckets in its database. In such a case, this object
is not required, as only valid history buckets are available
while invalid history buckets are simply not in the database.
This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalValid."
REFERENCE
"[TR-159], Section 5.5.1.63"
::= { g9983SvcPm1DayEntry 4 }
--
-- Conformance Statements
--
g9983Groups OBJECT IDENTIFIER
::= { g9983Conformance 1 }
g9983Compliances OBJECT IDENTIFIER
::= { g9983Conformance 2 }
-- Object Groups
g9983BasicGroup OBJECT-GROUP
OBJECTS {
g9983PortConfAdminServices,
g9983PortStatCrc4Errors,
g9983PortStatCrc6Errors,
g9983PortStatCrc8Errors,
g9983PortCapFecSupported,
g9983OperSvcIdx,
g9983OperSvcState,
g9983SvcIfIdx,
g9983SvcType,
g9983SvcSize,
g9983SvcRowStatus,
g9983PortStatFltStatus
}
STATUS current
DESCRIPTION
"A collection of objects representing management information
for G.Bond/TDIM ports."
::= { g9983Groups 1 }
g9983FecGroup OBJECT-GROUP
OBJECTS {
g9983PortCapFecSupported,
g9983PortConfFecAdminState,
g9983PortStatFecOperState,
g9983PortConfFecWordSize,
g9983PortConfFecRedundancySize,
g9983PortConfFecInterleaverType,
g9983PortConfFecInterleaverDepth,
g9983PortCapFecMaxWordSize,
g9983PortCapFecMaxRedundancySize,
g9983PortCapFecInterleaverTypeSupported,
g9983PortCapFecMaxInterleaverDepth
}
STATUS current
DESCRIPTION
"A collection of objects supporting the OPTIONAL Forward Error
Correction (FEC) and Interleaver function in G.Bond/TDIM
ports."
::= { g9983Groups 2 }
g9983AlarmConfGroup OBJECT-GROUP
OBJECTS {
g9983PortConfSvcUpDownEnable
}
STATUS current
DESCRIPTION
"A collection of objects required for configuration of alarm
thresholds and notifications in G.Bond/TDIM ports."
::= { g9983Groups 3 }
g9983NotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
g9983SvcUp,
g9983SvcDown
}
STATUS current
DESCRIPTION
"This group supports notifications of significant conditions
associated with G.Bond/TDIM ports."
::= { g9983Groups 4 }
g9983PerfCurrGroup OBJECT-GROUP
OBJECTS {
g9983PortPmCur15MinValidIntervals,
g9983PortPmCur15MinInvalidIntervals,
g9983PortPmCur15MinTimeElapsed,
g9983PortPmCur15MinCrc4s,
g9983PortPmCur15MinCrc6s,
g9983PortPmCur15MinCrc8s,
g9983PortPmCur1DayValidIntervals,
g9983PortPmCur1DayInvalidIntervals,
g9983PortPmCur1DayTimeElapsed,
g9983PortPmCur1DayCrc4s,
g9983PortPmCur1DayCrc6s,
g9983PortPmCur1DayCrc8s,
g9983SvcPmCur15MinValidIntervals,
g9983SvcPmCur15MinInvalidIntervals,
g9983SvcPmCur15MinTimeElapsed,
g9983SvcPmCur15MinDowns,
g9983SvcPmCur1DayValidIntervals,
g9983SvcPmCur1DayInvalidIntervals,
g9983SvcPmCur1DayTimeElapsed,
g9983SvcPmCur1DayDowns
}
STATUS current
DESCRIPTION
"A collection of objects supporting OPTIONAL current Performance
Monitoring information for G.Bond/TDIM ports."
::= { g9983Groups 5 }
g9983Perf15MinGroup OBJECT-GROUP
OBJECTS {
g9983PortPm15MinIntervalMoniTime,
g9983PortPm15MinIntervalCrc4s,
g9983PortPm15MinIntervalCrc6s,
g9983PortPm15MinIntervalCrc8s,
g9983PortPm15MinIntervalValid,
g9983SvcPm15MinIntervalMoniTime,
g9983SvcPm15MinIntervalDowns,
g9983SvcPm15MinIntervalValid
}
STATUS current
DESCRIPTION
"A collection of objects supporting OPTIONAL historical
Performance Monitoring information for G.Bond/TDIM ports, during
previous 15-minute intervals."
::= { g9983Groups 6 }
g9983Perf1DayGroup OBJECT-GROUP
OBJECTS {
g9983PortPm1DayIntervalMoniTime,
g9983PortPm1DayIntervalCrc4s,
g9983PortPm1DayIntervalCrc6s,
g9983PortPm1DayIntervalCrc8s,
g9983PortPm1DayIntervalValid,
g9983SvcPm1DayIntervalMoniTime,
g9983SvcPm1DayIntervalDowns,
g9983SvcPm1DayIntervalValid
}
STATUS current
DESCRIPTION
"A collection of objects supporting OPTIONAL historical
Performance Monitoring information for G.Bond/TDIM ports, during
previous 1-day intervals."
::= { g9983Groups 7 }
-- Compliance Statements
g9983Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for G.Bond/TDIM interfaces.
Compliance with the following external compliance statements
is REQUIRED:
MIB Module Compliance Statement
---------- --------------------
IF-MIB ifCompliance3
GBOND-MIB gBondCompliance"
MODULE -- this module
MANDATORY-GROUPS {
g9983BasicGroup,
g9983AlarmConfGroup,
g9983NotificationGroup
}
GROUP g9983FecGroup
DESCRIPTION
"Support for this group is only required for implementations
supporting the G.Bond/TDIM FEC and Interleaver function."
GROUP g9983PerfCurrGroup
DESCRIPTION
"Support for this group is only required for implementations
supporting Performance Monitoring."
GROUP g9983Perf15MinGroup
DESCRIPTION
"Support for this group is only required for implementations
supporting historical Performance Monitoring."
GROUP g9983Perf1DayGroup
DESCRIPTION
"Support for this group is only required for implementations
supporting historical Performance Monitoring."
::= { g9983Compliances 1 }
END
7. Security Considerations
There are a number of managed objects defined in this MIB module with
a MAX-ACCESS clause of read-write and/or read-create. Such objects
may be considered sensitive or vulnerable in some network
environments. The support for SET operations in a non-secure
environment without proper protection can have a negative effect on
network operations. These are the tables and objects and their
sensitivity/vulnerability:
o Changing of the g9983PortConfAdminServices object may lead to a
potential service disruption, by changing a particular service's
position (therefore changing its drop priority) or even removing
the service from the link altogether.
o Changing of g9983SvcTable configuration parameters (e.g.,
g9983SvcType or g9983SvcSize) may lead to a potential service
impairment; for example, a TDM service would be dropped if there
is not enough actual bandwidth on the bonded link to support this
service.
o Changing of g9983PortConfTable configuration parameters (e.g.,
g9983PortConfFecAdminState) may lead to anything from link quality
and rate degradation to a complete link initialization failure.
Some of the readable objects in this MIB module (i.e., those with
MAX-ACCESS other than not-accessible) may be considered sensitive or
vulnerable in some network environments since, collectively, they
provide information about the performance of network interfaces and
can reveal some aspects of their configuration.
In particular, since a bonded xDSL port can be comprised of multiple
Unshielded Twisted Pair (UTP) voice-grade copper, located in the same
bundle with other pairs belonging to another operator/customer, it is
theoretically possible to eavesdrop on a G.Bond transmission, simply
by "listening" to cross-talk from the bonded pairs, especially if the
operating parameters of the G.Bond link in question are known.
It is thus important to control even GET and/or NOTIFY access to
these objects and possibly to even encrypt the values of these
objects when sending them over the network via SNMP. These are the
tables and objects and their sensitivity/vulnerability:
o g9983PortStatFecOperState in the g9983PortStatTable indicates
whether the FEC function is enabled, which may aid in deciphering
the G.Bond/TDIM transmissions.
o The g9983OperSvcTable provides current operational service
configuration, which may aid in deciphering the G.Bond/TDIM
transmissions.
SNMP versions prior to SNMPv3 did not include adequate security.
Even if the network itself is secure (for example by using IPsec),
there is no control as to who on the secure network is allowed to
access and GET/SET (read/change/create/delete) the objects in this
MIB module.
Implementations SHOULD provide the security features described by the
SNMPv3 framework (see [RFC3410]), and implementations claiming
compliance to the SNMPv3 standard MUST include full support for
authentication and privacy via the User-based Security Model (USM)
[RFC3414] with the AES cipher algorithm [RFC3826]. Implementations
MAY also provide support for the Transport Security Model (TSM)
[RFC5591] in combination with a secure transport such as SSH
[RFC5592] or TLS/DTLS [RFC6353].
Further, deployment of SNMP versions prior to SNMPv3 is NOT
RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
enable cryptographic security. It is then a customer/operator
responsibility to ensure that the SNMP entity giving access to an
instance of this MIB module is properly configured to give access to
the objects only to those principals (users) that have legitimate
rights to indeed GET or SET (change/create/delete) them.
8. IANA Considerations
IANA has allocated value 210 as the Object identifier for g9983MIB
MODULE-IDENTITY <http://www.iana.org/> in the MIB-2 transmission
sub-tree.
9. Acknowledgments
This document was produced by the [ADSLMIB] working group.
Special thanks to Dan Romascanu for his meticulous review of this
text.
10. References
10.1. Normative References
[G.998.3] ITU-T, "Multi-pair bonding using time-division inverse
multiplexing", ITU-T Recommendation G.998.3, January 2005,
<http://www.itu.int/rec/T-REC-G.998.3/en>.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J.
Schoenwaelder, Ed., "Structure of Management Information
Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.
[RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J.
Schoenwaelder, Ed., "Textual Conventions for SMIv2",
STD 58, RFC 2579, April 1999.
[RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
"Conformance Statements for SMIv2", STD 58, RFC 2580,
April 1999.
[RFC2863] McCloghrie, K. and F. Kastenholz, "The Interfaces Group
MIB", RFC 2863, June 2000.
[RFC3414] Blumenthal, U. and B. Wijnen, "User-based Security Model
(USM) for version 3 of the Simple Network Management
Protocol (SNMPv3)", STD 62, RFC 3414, December 2002.
[RFC3705] Ray, B. and R. Abbi, "High Capacity Textual Conventions
for MIB Modules Using Performance History Based on 15
Minute Intervals", RFC 3705, February 2004.
[RFC3826] Blumenthal, U., Maino, F., and K. McCloghrie, "The
Advanced Encryption Standard (AES) Cipher Algorithm in the
SNMP User-based Security Model", RFC 3826, June 2004.
[RFC5591] Harrington, D. and W. Hardaker, "Transport Security Model
for the Simple Network Management Protocol (SNMP)",
RFC 5591, June 2009.
[RFC5592] Harrington, D., Salowey, J., and W. Hardaker, "Secure
Shell Transport Model for the Simple Network Management
Protocol (SNMP)", RFC 5592, June 2009.
[RFC6353] Hardaker, W., "Transport Layer Security (TLS) Transport
Model for the Simple Network Management Protocol (SNMP)",
RFC 6353, July 2011.
[RFC6765] Beili, E. and M. Morgenstern, "xDSL Multi-Pair Bonding
(G.Bond) MIB", RFC 6765, February 2013.
[TR-159] Beili, E. and M. Morgenstern, "Management Framework for
xDSL Bonding", Broadband Forum Technical Report TR-159,
December 2008, <http://www.broadband-forum.org/technical/
download/TR-159.pdf>.
10.2. Informative References
[ADSLMIB] IETF, "ADSL MIB (adslmib) Charter",
<http://datatracker.ietf.org/wg/adslmib/charter/>.
[G.704] ITU-T, "Synchronous frame structures used at 1544, 6312,
2048, 8448 and 44 736 kbit/s hierarchical levels", ITU-T
Recommendation G.704, October 1998,
<http://www.itu.int/rec/T-REC-G.704/en>.
[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart,
"Introduction and Applicability Statements for Internet-
Standard Management Framework", RFC 3410, December 2002.
[RFC3593] Tesink, K., "Textual Conventions for MIB Modules Using
Performance History Based on 15 Minute Intervals",
RFC 3593, September 2003.
[RFC4181] Heard, C., "Guidelines for Authors and Reviewers of MIB
Documents", BCP 111, RFC 4181, September 2005.
Author's Address
Edward Beili
Actelis Networks
25 Bazel St.
Petach-Tikva 49103
Israel
Phone: +972-3-924-3491
EMail: edward.beili@actelis.com