| Rfc | 6240 |
|---|
| Title | Synchronous Optical Network/Synchronous Digital Hierarchy
(SONET/SDH) Circuit Emulation over Packet (CEP) MIB Using SMIv2 |
|---|
| Author | D.
Zelig, Ed., R. Cohen, Ed., T. Nadeau, Ed. |
|---|
| Date | May 2011 |
|---|
| Format: | TXT,
HTML |
|---|
| Status: | PROPOSED STANDARD |
|---|
|
Internet Engineering Task Force (IETF) D. Zelig, Ed.
Request for Comments: 6240 PMC-Sierra
Category: Standards Track R. Cohen, Ed.
ISSN: 2070-1721 Resolute Networks
T. Nadeau, Ed.
CA Technologies
May 2011
Synchronous Optical Network/Synchronous Digital Hierarchy (SONET/SDH)
Circuit Emulation over Packet (CEP) MIB Using SMIv2
Abstract
This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in the Internet community.
In particular, it describes managed objects for modeling Synchronous
Optical Network/Synchronous Digital Hierarchy (SONET/SDH) circuits
over a Packet Switch Network (PSN).
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 5741.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
http://www.rfc-editor.org/info/rfc6240.
Copyright Notice
Copyright (c) 2011 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
This document may contain material from IETF Documents or IETF
Contributions published or made publicly available before November
10, 2008. The person(s) controlling the copyright in some of this
material may not have granted the IETF Trust the right to allow
modifications of such material outside the IETF Standards Process.
Without obtaining an adequate license from the person(s) controlling
the copyright in such materials, this document may not be modified
outside the IETF Standards Process, and derivative works of it may
not be created outside the IETF Standards Process, except to format
it for publication as an RFC or to translate it into languages other
than English.
Table of Contents
1. Introduction ....................................................3
2. Conventions Used in This Document ...............................3
3. Terminology .....................................................3
4. The Internet-Standard Management Framework ......................4
5. Feature Checklist ...............................................4
6. MIB Module Description and Usage ................................5
6.1. PW-CEP-STD-MIB Summary .....................................5
6.2. MIB Modules Required for IMPORTS ...........................5
6.3. PW-STD-MIB Module Usage ....................................6
6.4. PW-CEP-STD-MIB Module Usage ................................6
6.5. Example of PW-CEP-STD-MIB Usage ............................7
7. Object Definitions ..............................................8
8. Security Considerations ........................................64
9. IANA Considerations ............................................65
10. References ....................................................65
10.1. Normative References .....................................65
10.2. Informative References ...................................66
11. Contributors ..................................................67
1. Introduction
This document describes a model for managing encapsulated SONET/SDH
Time Division Multiplexed (TDM) digital signals for transmission over
a Packet Switched Network (PSN).
This document is closely related to [RFC4842], which describes the
technology to encapsulate TDM signals and provides the Circuit
Emulation Service over a Packet Switched Network (PSN).
The model for Circuit Emulation over Packet (CEP) management is a MIB
module. The PW-CEP-STD-MIB module described in this document works
closely with the MIB modules described in [RFC5601] and the textual
conventions defined in [RFC5542]. In the spirit of [RFC2863], a CEP
connection will be a pseudowire (PW) and will therefore not be
represented in the ifTable.
CEP is currently specified to carry "structured" SONET/SDH paths,
meaning that each SONET/SDH path or Virtual Tributary (VT) within the
section/line/path can be processed separately. The SONET/SDH
section/line/path interface stack is modeled within [RFC3592].
This document adopts the definitions, acronyms, and mechanisms
described in [RFC3985]. Unless otherwise stated, the mechanisms of
[RFC3985] apply and will not be redescribed here.
2. Conventions Used in This Document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [RFC2119].
3. Terminology
CEP terminology comes from [RFC4842], which describes a mechanism for
transporting SONET/SDH Time Division Multiplexed (TDM) digital
signals over a packet-oriented network. The mechanism for structured
emulation (as outlined in [RFC4842]) terminates the SONET/SDH section
and line overhead and then breaks the SONET/SDH path's Synchronous
Payload Envelope (SPE) into fragments for transmission over a PSN.
Mechanisms for terminating the SONET/SDH path overhead and extracting
SONET VTs are also described in [RFC4842]. Mechanisms for fractional
SONET/SDH SPE emulation are described in [RFC4842]. A CEP header
that contains a sequence number and pointer adjustment information is
appended at the beginning of each fragment to provide information
regarding where the SPE begins within the packet stream (see
[RFC4842]).
"Outbound" references the traffic direction in which a SONET/SDH
path's payload (SPE) is received, adapted to packet, assigned a PW
label, and sent into the PSN.
Conversely, "inbound" is the direction in which packets are received
from the PSN and packet payloads are reassembled back into an SPE and
inserted as a SONET/SDH path into the SONET/SDH section and line.
Since a SONET/SDH path is bidirectional and symmetrical, CEP uses the
same SONET/SDH timeslot, SONET/SDH width, and packet size. Inbound
and outbound PW labels may differ.
4. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP).
Objects in the MIB are defined using the mechanisms defined in the
Structure of Management Information (SMI). This memo specifies a MIB
module that is compliant to the SMIv2, which is described in STD 58,
RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
[RFC2580].
5. Feature Checklist
The PW-CEP-STD-MIB module is designed to satisfy the following
requirements and constraints:
- The MIB module is designed to work with the PW-STD-MIB [RFC5601]
module.
- The MIB module is independent of the PSN type.
- The MIB module supports all the signal types as defined in
[RFC4842]: SPE, fractional SPE, VT, both SONET and SDH mapping.
The MIB module also supports all the optional features as defined
in [RFC4842].
- The MIB module reports all the statistics as defined by [RFC4842].
6. MIB Module Description and Usage
For clarity of the description below, in most cases, we refer to the
SONET path signal configuration only, but the same examples are
applicable for SDH signals and VT-level processing as well, as
described in [RFC3985].
6.1. PW-CEP-STD-MIB Summary
- The CEP PW Table (pwCepTable) contains the SONET/SDH path/VT
ifIndex, SONET/SDH path timeslot, the pwCepCfgTable index, config
error indications, and various status indications.
- The CEP PW Configuration Parameter Table (pwCepCfgTable) has
objects for CEP PW configuration. In situations where sets of
config objects are common amongst more than one CEP PW, a single
entry here may be referenced by many pwCepTable entries.
- The CEP PW Performance Current Interval Table
(pwCepPerfCurrentTable) contains CEP stats for the current
15-minute period.
- The CEP Performance 15-Minute Interval Table
(pwCepPerfIntervalTable) is similar to the pwCepPerfCurrentTable.
It contains historical intervals (usually 96 15-minute entries to
cover a 24-hour period).
Note: the performance interval statistics are supported by CEP due
to the very function of CEP, that is, processing SONET/SDH. See
[RFC3592].
- The CEP Performance 1-Day Table (pwCepPerf1DayIntervalTable)
contains statistics accumulated during the current day and
contains previous days' historical statistics.
- The CEP Fractional Table (pwCepFracTable) adds configuration and
monitoring parameters for fractional SPE PWs.
6.2. MIB Modules Required for IMPORTS
The PW-CEP-STD-MIB IMPORTS objects from SNMPv2-SMI [RFC2578],
SNMPv2-TC [RFC2579], SNMPv2-CONF [RFC2580], SNMP-FRAMEWORK-MIB
[RFC3411], PerfHist-TC-MIB [RFC3593], HC-PerfHist-TC-MIB [RFC3705],
IF-MIB [RFC2863], PW-STD-MIB [RFC5601], and PW-TC-STD-MIB [RFC5542].
6.3. PW-STD-MIB Module Usage
The MIB module structure for defining a PW service is composed of
three layers of MIB modules functioning together. This general model
is defined in the Pseudowire Emulation Edge-to-Edge (PWE3)
architecture [RFC3985]. The layering model is intended to
sufficiently isolate PW services from the underlying PSN layer that
carries the emulated service. This is done at the same time as
providing a standard means for connecting any supported services to
any supported PSNs.
The first layer, known as the service layer, contains service-
specific modules such as the one defined in this document. These
modules define service-specific management objects that interface or
collaborate with existing MIB modules for the native version of the
service. The service-specific module "glues" the standard modules to
the PWE3 MIB modules. The PW-CEP-STD-MIB module defined in this memo
serves as one of the PW-type-specific MIB modules.
The next layer of the PWE3 MIB framework is the PW-STD-MIB module
[RFC5601]. This module is used to configure general parameters of
PWs that are common to all types of emulated services and PSNs. This
layer is connected to the service-specific layer above and the PSN
layer below.
The PSN layer provides PSN-specific modules for each type of PSN.
These modules associate the PW with one or more "tunnels" that carry
the service over the PSN. These modules are defined in other
documents. This module is used to "glue" the PW service to the
underlying PSN-specific MIB modules.
6.4. PW-CEP-STD-MIB Module Usage
Configuring a CEP PW involves the following steps.
(1) First, create an entry in the pwTable:
- Follow steps as defined in [RFC5601].
(2) Configure the PSN tunnel in the respective PSN-specific PWE3 PSN
glue MIB modules and the respective PSN-specific MIB modules.
Configure the SONET path parameters:
- Set the SONET path width in the sonetPathCurrentTable
[RFC3592].
- Set the SONET path index and the SONET path starting timeslot
in the pwCepTable.
NOTE: The agent creates an entry in the pwCepTable based on the
entry created in the pwTable.
(3) Configure the CEP PW:
- If necessary, create an entry in the pwCepCfgTable (a
suitable entry may already exist). Set packet length, etc.
- Set the index of this pwCepCfgTable entry in the pwCepTable.
(4) Observe the CEP PW:
- Once a CEP PW is operational, the pwCepPerfCurrentTable,
pwCepPerfIntervalTable, and pwCepPerf1DayIntervalTable can be
used to monitor the various counts, indicators, and
conditions of the PW.
6.5. Example of PW-CEP-STD-MIB Usage
In this section, we provide an example of using the MIB objects
described in Section 7 to set up a CEP PW. While this example is not
meant to illustrate every permutation of the MIB, it is intended as
an aid to understanding some of the key concepts. It is meant to be
read after going through the MIB itself. See [RFC5601] for an
example of setting up PSN tunnels.
First, configure the SONET path width, starting timeslot, and
associated CEP PW. In this case, an Synchronous Transport Signal 3c
(STS-3c) starts at SONET timeslot 1 (and is distributed normally
within the SONET frame). In the following example, the ifIndex for
the sonetPathCurrentEntry is 23, while the pwCepCfgTable index is 9.
In [RFC3592], sonetPathCurrentEntry (ifIndex = 23):
{
sonetPathCurrentWidth = 3,
sonetPathCurrentStatus
...
...
}
Create an entry in the pwCepCfgTable (index = 9):
{
pwCepCfgSonetPaylaodLength = 783 -- payload bytes
pwCepCfgMinPktLength = 0 -- no minimum
pwCepCfgPktReorder = true
pwCepCfgEnableDBA = unequipped
pwCepCfgRtpHdrSuppress = false
pwCepCfgJtrBfrDepth = 500 -- micro-seconds
pwCepCfgConsecPktsInsync = 2 -- Exit Loss of Packet
-- Synchronization (LOPS)
-- state
pwCepCfgConsecMissingOutSync = 10 -- Enter LOPS state
pwCepCfgPktErrorPlayOutValue = 0xFF -- All ones
pwCepCfgMissingPktsToSes = 3 -- packets
pwCepCfgSesToUas = 2 -- seconds
pwCepCfgSecsToExitUas = 10 -- seconds
pwCepCfgRowStatus = createAndGo
}
In the PW-STD-MIB module: Get a new index and create a new pwTable
entry using pwIndexNext (here, the PW index = 83) and pwRowStatus.
In this new entry, set pwType to 'cep'. The agent will create a new
entry in the pwCepTable. Set the SONET path ifIndex, SONET path
timeslot, and Cfg Table indexes within this new pwCep table entry:
{
pwCepSonetIfIndex = 23 -- Index of associated entry
-- in sonetPathCurrent table
pwCepCfgIndex = 9 -- Index of associated entry
-- in pwCepCfg table (above)
}
7. Object Definitions
PW-CEP-STD-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Integer32, Counter32, Unsigned32, Counter64, mib-2
FROM SNMPv2-SMI -- [RFC2578]
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF -- [RFC2580]
TEXTUAL-CONVENTION, TruthValue, RowStatus, StorageType,
TimeStamp
FROM SNMPv2-TC -- [RFC2579]
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB -- [RFC3411]
InterfaceIndexOrZero, InterfaceIndex
FROM IF-MIB -- [RFC2863]
PerfCurrentCount, PerfIntervalCount
FROM PerfHist-TC-MIB -- [RFC3593]
HCPerfCurrentCount, HCPerfIntervalCount, HCPerfTimeElapsed,
HCPerfValidIntervals
FROM HC-PerfHist-TC-MIB -- [RFC3705]
pwIndex
FROM PW-STD-MIB -- [RFC5601]
PwCfgIndexOrzero
FROM PW-TC-STD-MIB -- [RFC5542]
;
-- The PW CEP MIB
pwCepStdMIB MODULE-IDENTITY
LAST-UPDATED "201105160000Z" -- 16 May 2011 00:00:00 GMT
ORGANIZATION "Pseudowire Emulation Edge-to-Edge (PWE3)
Working Group"
CONTACT-INFO
"David Zelig (Ed.)
Email: david_zelig@pmc-sierra.com
Ron Cohen (Ed.)
Email: ronc@resolutenetworks.com
Thomas D. Nadeau (Ed.)
Email: Thomas.Nadeau@ca.com
The PWE3 Working Group
Email: pwe3@ietf.org (email distribution)
http://www.ietf.org/html.charters/pwe3-charter.html"
DESCRIPTION
"This MIB module contains managed object definitions for
Circuit Emulation over Packet (CEP) as in [RFC4842]: Malis,
A., Prayson, P., Cohen, R., and D. Zelig. 'Synchronous
Optical Network/Synchronous Digital Hierarchy (SONET/SDH)
Circuit Emulation over Packet (CEP)', RFC 4842.
Copyright (c) 2011 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD
License set forth in Section 4.c of the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info)."
-- Revision history
REVISION "201105160000Z" -- 16 May 2011 00:00:00 GMT
DESCRIPTION "This MIB module published as part of RFC 6240."
::= { mib-2 200 }
-- Local textual conventions
PwCepSonetEbm ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Equipped Bit Mask (EBM) used for fractional STS-1/Virtual
Circuit 3 (VC-3). The EBM bits are the 28 least
significant bits out of the 32-bit value."
SYNTAX Unsigned32
PwCepSdhVc4Ebm ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Equipped Bit Mask (EBM) used for each Tributary Unit Group
3 (TUG-3) in fractional VC-4 circuits. The EBM bits are
the 30 least significant bits out of the 32-bit value."
SYNTAX Unsigned32
PwCepSonetVtgMap ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The VT/VC types carried in the 7 VT groups (VTGs)/TUG-2s.
The format is 28 bits in the form of an Equipped Bit Mask
(EBM) for fractional STS-1/VC-3. The mapping specifies the
maximal occupancies of VT/VC within each VTG/TUG-2. For
example, all four bits are set to 1 in this object to
represent a VTG carrying VT1.5/VC11s, while only three
are set when VT2/VC12s are carried within this VTG.
The relevant bits are the 28 least significant bits out of
the 32-bit value."
SYNTAX Unsigned32
PwCepFracAsyncMap ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The type of asynchronous mapping carried inside STS-1,
VC-3, or TUG-3 containing TU-3 circuit."
SYNTAX INTEGER {
other ( 1),
ds3 ( 2),
e3 ( 3)
}
-- Top-level components of this MIB module
-- Tables, Scalars
pwCepObjects OBJECT IDENTIFIER
::= { pwCepStdMIB 1 }
-- Conformance
pwCepConformance OBJECT IDENTIFIER
::= { pwCepStdMIB 2 }
-- CEP PW Table
pwCepTable OBJECT-TYPE
SYNTAX SEQUENCE OF PwCepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains objects and parameters for managing and
monitoring the CEP PW."
::= { pwCepObjects 1 }
pwCepEntry OBJECT-TYPE
SYNTAX PwCepEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents the association of a SONET/SDH path or
VT to a PW. This table is indexed by the pwIndex of the
applicable PW entry in the pwTable.
An entry is created in this table by the agent for every
entry in the pwTable with a pwType equal to 'cep'.
All read-write objects in this table MAY be changed at any
time; however, change of some objects (for example
pwCepCfgIndex) during PW forwarding state may cause
traffic disruption.
Manual entries in this table SHOULD be preserved after a
reboot. The agent MUST ensure the integrity of those
entries. If the set of entries of a specific row are found
to be inconsistent after reboot, the PW pwOperStatus MUST
be declared as notPresent(5)."
INDEX { pwIndex }
::= { pwCepTable 1 }
PwCepEntry ::= SEQUENCE {
pwCepType INTEGER,
pwCepSonetIfIndex InterfaceIndexOrZero,
pwCepSonetConfigErrorOrStatus BITS,
pwCepCfgIndex PwCfgIndexOrzero,
pwCepTimeElapsed HCPerfTimeElapsed,
pwCepValidIntervals HCPerfValidIntervals,
pwCepIndications BITS,
pwCepLastEsTimeStamp TimeStamp,
pwCepPeerCepOption Unsigned32
}
pwCepType OBJECT-TYPE
SYNTAX INTEGER {
spe (1),
vt (2),
fracSpe (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the sub-type of CEP PW. Currently only
structured types are supported:
'spe'(1) : SONET STS-Nc signals.
'vt' (2) : SONET VT-x (x=1.5,2,3,6) signals.
'fracSpe' (3) : SONET fractional STS-1 or SDH fractional
VC-3 or VC-4 carrying tributaries or
asynchronous signals.
Support of 'vt' mode or 'fracSpe' mode is optional."
DEFVAL
{ spe }
::= { pwCepEntry 1 }
pwCepSonetIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is a unique index within the ifTable. It represents
the interface index for the SONET path for SPE emulation
([RFC3592], Section 3.3), an interface index for the SONET
VT ([RFC3592], Section 3.4) if the VT to be emulated is
extracted from a SONET signal or locally mapped from a
physical interface.
A value of zero indicates an interface index that has yet
to be determined.
Once set, if the SONET ifIndex is (for some reason) later
removed, the agent MAY delete the associated PW rows
(e.g., this pwCepTableEntry). If the agent does not
delete the rows, it is RECOMMENDED that the agent set this
object to zero."
::= { pwCepEntry 2 }
pwCepSonetConfigErrorOrStatus OBJECT-TYPE
SYNTAX BITS {
other ( 0),
timeslotInUse ( 1),
timeslotMisuse ( 2),
peerDbaIncompatible ( 3), -- Status only
peerEbmIncompatible ( 4),
peerRtpIncompatible ( 5),
peerAsyncIncompatible ( 6),
peerDbaAsymmetric ( 7), -- Status only
peerEbmAsymmetric ( 8),
peerRtpAsymmetric ( 9),
peerAsyncAsymmetric (10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reports a configuration mismatch inside
the local node or between the local node and the peer node.
Some bits indicate an error, and some are simply status
reports that do not affect the forwarding process.
'timeslotInUse'(1) is set when another CEP PW has already
reserved a timeslot (or timeslots) that this CEP PW is
attempting to reserve.
'timeslotMisuse'(2) is set when the stated timeslot this
PW is trying to use is not legal, for example, if
specifying a starting timeslot of 45 for a SONET path of
an STS-12c width.
The peerZZZIncompatible bits are set if the local
configuration is not compatible with the peer configuration
as available from the CEP option received from the peer
through the signaling process and the local node cannot
support such asymmetric configuration.
The peerZZZAsymmetric bits are set if the local
configuration is not compatible with the peer configuration
as available from the CEP option received from the peer
through the signaling process, but the local node can
support such asymmetric configuration."
REFERENCE
"Malis, A., et al., 'Synchronous Optical Network/Synchronous
Digital Hierarchy (SONET/SDH) Circuit Emulation over Packet
(CEP)', RFC 4842, Section 12."
::= { pwCepEntry 3 }
pwCepCfgIndex OBJECT-TYPE
SYNTAX PwCfgIndexOrzero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Index to CEP configuration table below. Multiple CEP PWs
MAY share a single pwCepCfgEntry.
The value 0 indicates that no entries are available."
::= { pwCepEntry 4 }
pwCepTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds, including partial seconds,
that have elapsed since the beginning of the current
measurement period. If, for some reason such as an
adjustment in the system's time-of-day clock, the
current interval exceeds the maximum value, the
agent will return the maximum value."
::= { pwCepEntry 5 }
pwCepValidIntervals OBJECT-TYPE
SYNTAX HCPerfValidIntervals
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number (n) of previous 15-minute intervals for which
data was collected.
An agent with CEP capability MUST be capable of supporting
at least 4 intervals. The RECOMMENDED default value for
n is 32, and n MUST NOT exceed 96."
::= { pwCepEntry 6 }
pwCepIndications OBJECT-TYPE
SYNTAX BITS {
missingPkt ( 0),
ooRngDropped( 1),
jtrBfrUnder ( 2),
pktMalformed( 3),
lops ( 4),
cepRdi ( 5),
cepAis ( 6),
badHdrStack ( 7),
cepNeFailure( 8),
cepFeFailure( 9)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Definitions:
'missingPkt'(0) - While playing out a sequence of packets,
at least one packet was determined to be missing based on a
gap in the CEP sequence number. Note: If the implementation
supports packet reordering, detecting gaps SHOULD take
place as they are played out, not as they arrive. This
provides time for misordered packets to arrive late.
'ooRngDropped'(1) - At least one packet arrived outside the
range of the jitter buffer. This may be because the
jitter buffer is full or the sequence number addresses
a buffer outside the current jitter buffer range or
an already occupied buffer within range. Whether or not
packet reordering is supported by the implementation, this
indication MUST be supported.
'jtrBfrUnder'(2) - The jitter buffer underflowed because
not enough packets arrived as packets were being
played out.
'pktMalformed'(3) - Any error related to unexpected
packet format (except bad header stack) or unexpected
length.
'lops'(4) - Loss of Packet Synchronization.
'cepRdi'(5) - Circuit Emulation over Packet Remote Defect
Indication. Remote Defect Indication (RDI) is generated by
the remote CEP de-packetizer when LOPS is detected.
'cepAis'(6) - Remote CEP packetizer has detected an Alarm
Indication Signal (AIS) on its incoming SONET stream.
cepAis MUST NOT (in itself) cause a CEP PW down
notification.
'badHdrStack'(7) - Set when the number of
CEP header extensions detected in incoming packets does
not match the expected number.
'cepNeFailure'(8) - Set when CEP-NE failure is currently
declared.
'cepFeFailure'(8) - Set when CEP-FE failure is currently
declared.
This object MUST hold the accumulated indications until the
next SNMP write that clear the indication(s).
Writing a non-zero value MUST fail.
Currently, there is no hierarchy of CEP defects.
The algorithm used to capture these indications
is implementation specific."
::= { pwCepEntry 7 }
pwCepLastEsTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime on the most recent occasion at which
the CEP PW entered the Errored Seconds (ES) or Severely
Errored Seconds (SES) state."
::= { pwCepEntry 8 }
pwCepPeerCepOption OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the CEP option parameter as received from the
peer by the PW signaling protocol."
::= { pwCepEntry 9 }
-- End of CEP PW Table
-- Obtain index for PW CEP Configuration Table entries
pwCepCfgIndexNext OBJECT-TYPE
SYNTAX PwCfgIndexOrzero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an appropriate value to be used
for pwCepCfgIndex when creating entries in the
pwCepCfgTable. The value 0 indicates that no
unassigned entries are available. To obtain the
value of pwCepCfgIndex for a new entry in the
pwCepCfgTable, the manager issues a management
protocol retrieval operation to obtain the current
value of pwCepCfgIndex. After each retrieval
operation, the agent should modify the value to
reflect the next unassigned index. After a manager
retrieves a value, the agent will determine through
its local policy when this index value will be made
available for reuse."
::= { pwCepObjects 2 }
-- CEP PW Configuration Table
pwCepCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF PwCepCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a set of parameters that may be
referenced by one or more CEP PWs by pwCepTable."
::= { pwCepObjects 3 }
pwCepCfgEntry OBJECT-TYPE
SYNTAX PwCepCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"These parameters define the characteristics of a
CEP PW. They are grouped here to ease Network Management
System (NMS) burden. Once an entry is created here, it may
be reused by many PWs.
By default, all the read-create objects MUST NOT be
changed after row activation unless specifically indicated
in the individual object description. If the operator
wishes to change value of a read-create object, the
pwCepCfgRowStatus MUST be set to notInService(2).
The agent MUST NOT allow the change of the
pwCepCfgRowStatus from the active(1) state for
pwCepCfgEntry, which is in use by at least one active PW.
Manual entries in this table SHOULD be preserved after a
reboot, the agent MUST ensure the integrity of those
entries. If the set of entries of a specific row are found
to be inconsistent after reboot, the affected PWs'
pwOperStatus MUST be declared as notPresent(5)."
INDEX { pwCepCfgTableIndex }
::= { pwCepCfgTable 1 }
PwCepCfgEntry ::= SEQUENCE {
pwCepCfgTableIndex Unsigned32,
pwCepSonetPayloadLength Unsigned32,
pwCepCfgMinPktLength Unsigned32,
pwCepCfgPktReorder TruthValue,
pwCepCfgEnableDBA BITS,
pwCepCfgRtpHdrSuppress TruthValue,
pwCepCfgJtrBfrDepth Unsigned32,
pwCepCfgConsecPktsInsync Unsigned32,
pwCepCfgConsecMissingOutSync Unsigned32,
pwCepCfgPktErrorPlayOutValue Unsigned32,
pwCepCfgMissingPktsToSes Unsigned32,
pwCepCfgSesToUas Unsigned32,
pwCepCfgSecsToExitUas Unsigned32,
pwCepCfgName SnmpAdminString,
pwCepCfgRowStatus RowStatus,
pwCepCfgStorageType StorageType
}
pwCepCfgTableIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Primary index to this table."
::= { pwCepCfgEntry 1 }
pwCepSonetPayloadLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of SONET bytes of the Path or VT carried as
payload within one packet. For example, for STS-1/VC-3 SPE
circuits, a value of 783 bytes indicates that each packet
carries the payload equivalent to one frame. For VT1.5/VC11
circuits, a payload length of 104 bytes indicates that each
packet carries payload equivalent to one VT1.5 super-frame.
The actual payload size may be different due to bandwidth
reduction modes, e.g., Dynamic Bandwidth Allocation (DBA)
mode or dynamically assigned fractional SPE. This length
applies to inbound and outbound packets carrying user
payload. Although there is no control over inbound packets,
those of illegal length are discarded and accounted for (see
pwCepPerf...Malformed.)
The default values are determined by the pwCepType:
783 for pwCepType equal to spe(2) or fracSpe(3).
For vt(3) modes, the applicable super-frame payload size
is the default value."
REFERENCE
"Malis, A., et al., 'Synchronous Optical Network/Synchronous
Digital Hierarchy (SONET/SDH) Circuit Emulation over Packet
(CEP)', RFC 4842, Sections 5.1 and 12.1"
::= { pwCepCfgEntry 2 }
pwCepCfgMinPktLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines the minimum CEP packet length in
number of bytes (including CEP header and payload).
It applies to CEP's bandwidth-savings packets. Currently,
DBA is the only bandwidth-savings packet type (in the
future, CEP may support compression). Minimum packet
length is necessary in some systems or networks.
Setting zero here indicates that there is no minimum
packet restriction."
DEFVAL { 0 }
::= { pwCepCfgEntry 3 }
pwCepCfgPktReorder OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object defines if reordering is applied for incoming
packets.
If set 'true', as inbound packets are queued in the
jitter buffer, out-of-order packets are reordered. The
maximum sequence number differential (i.e., the range in
which resequencing can occur) is dependant on the depth
of the jitter buffer.
If the local agent supports packet reordering, the default
value SHOULD be set to 'true'; otherwise, this value
SHOULD be set to 'false'."
::= { pwCepCfgEntry 4 }
pwCepCfgEnableDBA OBJECT-TYPE
SYNTAX BITS {
ais (0),
unequipped (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines when DBA is applied for packets sent
toward the PSN.
Setting 'ais' MUST cause CEP packet payload suppression
when AIS is detected on the associated SONET path.
Similarly, 'unequipped' MUST cause payload suppression
when an unequipped condition is detected on the SONET/SDH
PATH/VT.
During DBA condition, CEP packets will continue
to be sent, but with indicators set in the CEP header
instructing the remote to play all ones (for AIS) or all
zeros (for unequipped) onto its SONET/SDH path.
NOTE: Some implementations may not support this feature.
In these cases, this object should be read-only."
REFERENCE
"Malis, A., et al., 'Synchronous Optical Network/Synchronous
Digital Hierarchy (SONET/SDH) Circuit Emulation over Packet
(CEP)', RFC 4842, Section 11.1."
::= { pwCepCfgEntry 5 }
pwCepCfgRtpHdrSuppress OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If this object is set to 'true', an RTP header is not
prepended to the CEP packet."
REFERENCE
"Malis, A., et al., 'Synchronous Optical Network/Synchronous
Digital Hierarchy (SONET/SDH) Circuit Emulation over Packet
(CEP)', RFC 4842, Section 5.3."
DEFVAL
{ true }
::= { pwCepCfgEntry 6 }
pwCepCfgJtrBfrDepth OBJECT-TYPE
SYNTAX Unsigned32
UNITS "micro-seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines the number of microseconds
of expected packet delay variation for this CEP PW
over the PSN.
The actual jitter buffer MUST be at least twice this
value for proper operation.
If configured to a value not supported by the
implementation, the agent MUST reject the SNMP Set
operation."
REFERENCE
"The control of jitter and wander within digital
networks which are based on the synchronous digital
hierarchy (SDH), ITU-T Recommendation G.825."
::= { pwCepCfgEntry 7 }
--
-- The following counters work together to integrate (filter)
-- errors and the lack of errors on the CEP PW. An error is
-- caused by a missing packet. Missing packets can be a result
-- of packet loss in the network, (uncorrectable) packet out
-- of sequence, packet-length error, jitter-buffer overflow,
-- and jitter-buffer underflow. The result declares whether
-- or not the CEP PW is in Loss of Packet Sync (LOPS) state.
--
pwCepCfgConsecPktsInsync OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Consecutive packets with sequential sequence
numbers required to exit the LOPS state."
REFERENCE
"Malis, A., et al., 'Synchronous Optical Network/Synchronous
Digital Hierarchy (SONET/SDH) Circuit Emulation over Packet
(CEP)', RFC 4842, Section 6.2.2."
DEFVAL
{ 2 }
::= { pwCepCfgEntry 8 }
pwCepCfgConsecMissingOutSync OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Consecutive missing packets required to enter
the LOPS state."
REFERENCE
"Malis, A., et al., 'Synchronous Optical Network/Synchronous
Digital Hierarchy (SONET/SDH) Circuit Emulation over Packet
(CEP)', RFC 4842, Section 6.2.2."
DEFVAL
{ 10 }
::= { pwCepCfgEntry 9 }
pwCepCfgPktErrorPlayOutValue OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines the value played when inbound packets
have over/underflowed the jitter buffer or are missing
for any reason. This byte pattern is sent (played) on
the SONET path."
DEFVAL
{ 255 } -- Play all ones, equal to AIS indications
::= { pwCepCfgEntry 10 }
pwCepCfgMissingPktsToSes OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of missing packets detected (consecutive or not)
within a 1-second window to cause a Severely Errored
Second (SES) to be counted."
REFERENCE
"Malis, A., et al., 'Synchronous Optical Network/Synchronous
Digital Hierarchy (SONET/SDH) Circuit Emulation over Packet
(CEP)', RFC 4842, Section 10.1."
DEFVAL
{ 3 }
::= { pwCepCfgEntry 11 }
pwCepCfgSesToUas OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of consecutive SESs before declaring PW in
Unavailable Seconds (UAS) state (at which point
pwCepPerfUASs starts counting). The SesToUas default value
is 10 seconds.
NOTE: Similar to [RFC3592], if the agent chooses to update
the various performance statistics in real time, it MUST
be prepared to retroactively reduce the ES and SES counts by
this value and increase the UAS count by this value when it
determines that UAS state has been entered.
NOTE: See pwCepPerfSESs and pwCepPerfUASs."
REFERENCE
"Malis, A., et al., 'Synchronous Optical Network/Synchronous
Digital Hierarchy (SONET/SDH) Circuit Emulation over Packet
(CEP)', RFC 4842, Section 10.1."
DEFVAL
{ 10 }
::= { pwCepCfgEntry 12 }
pwCepCfgSecsToExitUas OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of consecutive nonSESs before declaring PW is NOT
in UAS state (at which point pwCepPerfUASs stops counting)."
REFERENCE
"Malis, A., et al., 'Synchronous Optical Network/Synchronous
Digital Hierarchy (SONET/SDH) Circuit Emulation over Packet
(CEP)', RFC 4842, Section 10.1."
DEFVAL { 10 }
::= { pwCepCfgEntry 13 }
pwCepCfgName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable contains the name of the Configuration entry.
This name may be used to help the NMS to display the
purpose of the entry."
::= { pwCepCfgEntry 14 }
pwCepCfgRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For creating, modifying, and deleting this row.
None of the read-create objects' values can be changed
when pwCepCfgRowStatus is in the active(1) state. Changes
are allowed when the pwRowStatus is in notInService(2) or
notReady(3) states only.
If the operator needs to change one of the values for an
active row (for example, in order to fix a mismatch in
configuration between the local node and the peer), the
pwCepCfgRowStatus should be first changed to
notInService(2). The objects may be changed now and later
changed to active(1) in order to re-initiate the signaling
process with the new values in effect.
Change of status from the active(1) state or deleting a row
SHOULD be blocked by the local agent if the row is
referenced by any pwCepEntry those pwRowStatus
is in the active(1) state."
::= { pwCepCfgEntry 15 }
pwCepCfgStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the storage type for this row."
DEFVAL { nonVolatile }
::= { pwCepCfgEntry 16 }
-- End of CEP PW Configuration Parameter Table
-- CEP Fractional Table
pwCepFracTable OBJECT-TYPE
SYNTAX SEQUENCE OF PwCepFracEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a set of parameters for CEP PWs with
pwCepType FRAC type."
::= { pwCepObjects 4 }
pwCepFracEntry OBJECT-TYPE
SYNTAX PwCepFracEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There are two options for creating an entry in this table:
- By the Element Management System (EMS) in advance for
creating the PW.
- By the agent automatically when the PW is set up.
The first option is typically used when there is a native
service processing (NSP) cross-connect option between the
physical ports and the emulated (virtual ports), while the
second MAY be used when there is a one-to-one mapping
between the emulated signal and the physical signal."
INDEX { pwCepFracIndex }
::= { pwCepFracTable 1 }
PwCepFracEntry ::= SEQUENCE {
pwCepFracIndex InterfaceIndex,
pwCepFracMode INTEGER,
pwCepFracConfigError BITS,
pwCepFracAsync PwCepFracAsyncMap,
pwCepFracVtgMap PwCepSonetVtgMap,
pwCepFracEbm PwCepSonetEbm,
pwCepFracPeerEbm PwCepSonetEbm,
pwCepFracSdhVc4Mode INTEGER,
pwCepFracSdhVc4Tu3Map1 PwCepFracAsyncMap,
pwCepFracSdhVc4Tu3Map2 PwCepFracAsyncMap,
pwCepFracSdhVc4Tu3Map3 PwCepFracAsyncMap,
pwCepFracSdhVc4Tug2Map1 PwCepSonetVtgMap,
pwCepFracSdhVc4Tug2Map2 PwCepSonetVtgMap,
pwCepFracSdhVc4Tug2Map3 PwCepSonetVtgMap,
pwCepFracSdhVc4Ebm1 PwCepSdhVc4Ebm,
pwCepFracSdhVc4Ebm2 PwCepSdhVc4Ebm,
pwCepFracSdhVc4Ebm3 PwCepSdhVc4Ebm,
pwCepFracSdhVc4PeerEbm1 PwCepSdhVc4Ebm,
pwCepFracSdhVc4PeerEbm2 PwCepSdhVc4Ebm,
pwCepFracSdhVc4PeerEbm3 PwCepSdhVc4Ebm,
pwCepFracRowStatus RowStatus,
pwCepFracStorageType StorageType
}
pwCepFracIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the index of this table. It is a unique
index within the ifTable. It represents the interface index
for the SONET path ([RFC3592], Section 3.3) for fractional
SPE emulation.
It may represent an internal (virtual) interface if an NSP
function exists between the physical interface and the
emulation process."
::= { pwCepFracEntry 1 }
pwCepFracMode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable ( 1),
dynamic ( 2),
static ( 3),
staticWithEbm ( 4),
staticAsync ( 5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Fractional mode for STS-1/VC-3 or VC-4 circuits:
notApplicable - When this object is not applicable.
dynamic - EBM carried within the CEP header. Unequipped
VTs are removed from the payload on the fly.
static - EBM not carried within the CEP header. Only VTs
defined in the EBM are carried within the payload.
staticWithEbm - EBM carried within the CEP header. Only
VTs defined in the EBM are carried within the
payload.
staticAsync - Asynchronous E3/T3 fixed byte removal only."
DEFVAL
{ dynamic }
::= { pwCepFracEntry 2 }
pwCepFracConfigError OBJECT-TYPE
SYNTAX BITS {
other ( 0),
vtgMapEbmConflict ( 1),
vtgMapAsyncConflict ( 2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"vtgMapEbmConflict(1) is set when the configured static EBM
does not match the configured vtgMap for fractional
STS-1/VC-3 circuits or when the TUG2Map is in conflict with
the static EBM for VC-4 circuits, for example, if the vtgMap
specifies that VTG#1 carries VT2 VTs while the EBM indicate
that four VTs are equipped within VTG#1.
vtgMapAsyncConflict(2) is set when there is a conflict
between the mode, the async indication, and the vtgMap
fields. For example, fractional mode is set to staticAsync
while the VtgMap indicates that the STS-1/VC-3 carries VTs,
or both async1 and Tug2Map are set in fractional VC-4
circuits."
::= { pwCepFracEntry 3 }
pwCepFracAsync OBJECT-TYPE
SYNTAX PwCepFracAsyncMap
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines the asynchronous payload carried
within the STS-1/VC-3. This object is applicable when
pwCepFracMode equals 'staticAsync' and MUST equal to
'other' otherwise."
DEFVAL { other }
::= { pwCepFracEntry 4 }
pwCepFracVtgMap OBJECT-TYPE
SYNTAX PwCepSonetVtgMap
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines the VT/VC types of the seven
VTG/TUG-2 within the STS-1/VC-3.
This variable should be set when 'dynamic', 'static',
or 'staticWithEbm' fractional STS-1/VC-3 pwCepFracMode
is selected."
::= { pwCepFracEntry 5 }
pwCepFracEbm OBJECT-TYPE
SYNTAX PwCepSonetEbm
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object holds the static Equipped Bit Mask (EBM)
for STS-1/VC-3 channel.
This variable MAY be set when 'static' or
'staticWithEbm' fractional STS-1/VC-3 pwCepFracMode is
selected.
It is possible that the configuration of other MIB modules
will define the EBM value; in these cases, this object is
read-only and reflects the actual EBM that would be used."
::= { pwCepFracEntry 6 }
pwCepFracPeerEbm OBJECT-TYPE
SYNTAX PwCepSonetEbm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reports the Equipped Bit Mask (EBM) for
STS-1/VC-3 channel as received from the peer within
the CEP extension header."
::= { pwCepFracEntry 7 }
pwCepFracSdhVc4Mode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable ( 1),
dynamic ( 2),
static ( 3),
staticWithEbm ( 4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Fractional mode for VC-4 circuits:
notApplicable - When this is not VC-4 circuit.
dynamic - EBM carried within the CEP header. Unequipped
VTs are removed from the payload on the fly.
static - EBM not carried within the CEP header. Only VTs
defined in the EBM are carried within the payload.
staticWithEbm - EBM carried within the CEP header. Only
VTs defined in the EBM are carried within the
payload."
DEFVAL { notApplicable }
::= { pwCepFracEntry 8 }
pwCepFracSdhVc4Tu3Map1 OBJECT-TYPE
SYNTAX PwCepFracAsyncMap
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of asynchronous mapping carried inside STS-1,
VC-3, or TUG-3 containing TU-3 circuit."
DEFVAL { other }
::= { pwCepFracEntry 9 }
pwCepFracSdhVc4Tu3Map2 OBJECT-TYPE
SYNTAX PwCepFracAsyncMap
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the second TUG-3 within the VC-4 contains a TU-3, this
variable must be set."
DEFVAL { other }
::= { pwCepFracEntry 10 }
pwCepFracSdhVc4Tu3Map3 OBJECT-TYPE
SYNTAX PwCepFracAsyncMap
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the third TUG-3 within the VC-4 contains a TU-3, this
variable must be set."
DEFVAL { other }
::= { pwCepFracEntry 11 }
pwCepFracSdhVc4Tug2Map1 OBJECT-TYPE
SYNTAX PwCepSonetVtgMap
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VC types of the seven TUG-2s within the first
TUG-3 of the VC-4."
::= { pwCepFracEntry 12 }
pwCepFracSdhVc4Tug2Map2 OBJECT-TYPE
SYNTAX PwCepSonetVtgMap
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VC types of the seven TUG-2s within the second
TUG-3 of the VC-4."
::= { pwCepFracEntry 13 }
pwCepFracSdhVc4Tug2Map3 OBJECT-TYPE
SYNTAX PwCepSonetVtgMap
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VC types of the seven TUG-2s within the third
TUG-3 of the VC-4."
::= { pwCepFracEntry 14 }
pwCepFracSdhVc4Ebm1 OBJECT-TYPE
SYNTAX PwCepSdhVc4Ebm
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Static Equipped Bit Mask (EBM) for the first TUG-3
within the VC-4.
This variable should be set when 'static' or
'staticWithEbm' fractional VC-4 pwCepFracMode is
selected.
It is possible that the EBM that would be used is
available based on configuration of other MIB modules.
In these cases, this object is read-only and reflects the
actual EBM that would be used."
::= { pwCepFracEntry 15 }
pwCepFracSdhVc4Ebm2 OBJECT-TYPE
SYNTAX PwCepSdhVc4Ebm
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Static Equipped Bit Mask (EBM) for the second TUG-3
within the VC-4.
This variable should be set when 'static' or
'staticWithEbm' fractional VC-4 pwCepFracMode is
selected.
It is possible that the EBM that would be used is
available based on configuration of other MIB modules.
In these cases, this object is read-only and reflects the
actual EBM that would be used."
::= { pwCepFracEntry 16 }
pwCepFracSdhVc4Ebm3 OBJECT-TYPE
SYNTAX PwCepSdhVc4Ebm
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Static Equipped Bit Mask (EBM) for the third TUG-3 within
the VC-4.
This variable should be set when 'Static' or
'staticWithEbm' fractional VC-4 pwCepFracMode is
selected.
It is possible that the EBM that would be used is
available based on configuration of other MIB modules.
In these cases, this object is read-only and reflects the
actual EBM that would be used."
::= { pwCepFracEntry 17 }
pwCepFracSdhVc4PeerEbm1 OBJECT-TYPE
SYNTAX PwCepSdhVc4Ebm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Equipped Bit Mask (EBM) for the first TUG-3 within
the fractional VC-4 channel received from the peer
within the CEP extension header."
::= { pwCepFracEntry 18 }
pwCepFracSdhVc4PeerEbm2 OBJECT-TYPE
SYNTAX PwCepSdhVc4Ebm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Equipped Bit Mask (EBM) for the second TUG-3 within
the fractional VC-4 channel received from the peer
within the CEP extension header."
::= { pwCepFracEntry 19 }
pwCepFracSdhVc4PeerEbm3 OBJECT-TYPE
SYNTAX PwCepSdhVc4Ebm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Equipped Bit Mask (EBM) for the third TUG-3 within
the fractional VC-4 channel received from the peer
within the CEP extension header."
::= { pwCepFracEntry 20 }
pwCepFracRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For creating, modifying, and deleting this row.
This object MAY be changed at any time."
::= { pwCepFracEntry 21 }
pwCepFracStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable indicates the storage type for this
object."
DEFVAL { nonVolatile }
::= { pwCepFracEntry 22 }
-- End CEP Fractional Table
-- CEP PW Performance Current Interval Table
pwCepPerfCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF PwCepPerfCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"CEP bridges the SONET and packet worlds. In the packet
world, counts typically start from the time of service
creation and do not stop. In the SONET world, counts are
kept in 15-minute intervals. The PW CEP MIB supports both
methods. The current 15-minute interval counts are in
this table. The interval and total stats are in tables
following this.
This table provides per-CEP PW performance information.
High capacity (HC) counters are required for some counts
due to the high speeds expected with CEP services. A SONET
path of width 48 (STS-48c) can rollover non-HC counters in
a few minutes."
::= { pwCepObjects 5 }
pwCepPerfCurrentEntry OBJECT-TYPE
SYNTAX PwCepPerfCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by the agent for every
pwCep entry. After 15 minutes, the contents of this table
entry are copied to a new entry in the pwCepPerfInterval
table, and the counts in this entry are reset to zero."
INDEX { pwIndex }
::= { pwCepPerfCurrentTable 1 }
PwCepPerfCurrentEntry ::= SEQUENCE {
pwCepPerfCurrentDbaInPacketsHC HCPerfCurrentCount,
pwCepPerfCurrentDbaOutPacketsHC HCPerfCurrentCount,
pwCepPerfCurrentInNegPtrAdjust PerfCurrentCount,
pwCepPerfCurrentInPosPtrAdjust PerfCurrentCount,
pwCepPerfCurrentInPtrAdjustSecs PerfCurrentCount,
pwCepPerfCurrentOutNegPtrAdjust PerfCurrentCount,
pwCepPerfCurrentOutPosPtrAdjust PerfCurrentCount,
pwCepPerfCurrentOutPtrAdjustSecs PerfCurrentCount,
pwCepPerfCurrentAbsPtrAdjust Integer32,
pwCepPerfCurrentMissingPkts PerfCurrentCount,
pwCepPerfCurrentPktsOoseq PerfCurrentCount,
pwCepPerfCurrentPktsOoRngDropped PerfCurrentCount,
pwCepPerfCurrentJtrBfrUnderruns PerfCurrentCount,
pwCepPerfCurrentPktsMalformed PerfCurrentCount,
pwCepPerfCurrentSummaryErrors PerfCurrentCount,
pwCepPerfCurrentESs PerfCurrentCount,
pwCepPerfCurrentSESs PerfCurrentCount,
pwCepPerfCurrentUASs PerfCurrentCount,
pwCepPerfCurrentFC PerfCurrentCount
}
pwCepPerfCurrentDbaInPacketsHC OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of DBA packets received."
::= { pwCepPerfCurrentEntry 1 }
pwCepPerfCurrentDbaOutPacketsHC OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of DBA packets sent."
::= { pwCepPerfCurrentEntry 2 }
-- Pointer adjustment stats
pwCepPerfCurrentInNegPtrAdjust OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of negative pointer adjustments sent on the
SONET path based on CEP pointer adjustments received."
::= { pwCepPerfCurrentEntry 3 }
pwCepPerfCurrentInPosPtrAdjust OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of positive pointer adjustments sent on the
SONET path based on CEP pointer adjustments received."
::= { pwCepPerfCurrentEntry 4 }
pwCepPerfCurrentInPtrAdjustSecs OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of seconds in which a positive or negative pointer
adjustment was sent on the SONET path."
::= { pwCepPerfCurrentEntry 5 }
pwCepPerfCurrentOutNegPtrAdjust OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of negative pointer adjustments seen on the
SONET path and encoded onto sent CEP packets."
::= { pwCepPerfCurrentEntry 6 }
pwCepPerfCurrentOutPosPtrAdjust OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of positive pointer adjustments seen on the
SONET path and encoded onto sent CEP packets."
::= { pwCepPerfCurrentEntry 7 }
pwCepPerfCurrentOutPtrAdjustSecs OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of seconds in which a positive or negative pointer
adjustment was seen on the SONET path."
::= { pwCepPerfCurrentEntry 8 }
pwCepPerfCurrentAbsPtrAdjust OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the relative adjustment drift between
inbound and outbound streams.
It is calculated as absolute value of:
(InPosPtrAdjust - InNegPtrAdjust ) -
(OutPosPtrAdjust - OutNegPtrAdjust)"
::= { pwCepPerfCurrentEntry 9 }
pwCepPerfCurrentMissingPkts OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of missing packets (as detected via CEP header
sequence number gaps)."
::= { pwCepPerfCurrentEntry 10 }
pwCepPerfCurrentPktsOoseq OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets detected out of sequence (via CEP
header sequence numbers) but successfully reordered.
Note: Some implementations may not support this
feature (see pwCepCfgPktReorder)."
::= { pwCepPerfCurrentEntry 11 }
pwCepPerfCurrentPktsOoRngDropped OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets detected out of range (via CEP header
sequence numbers) and could not be reordered or could not
fit in the jitter buffer."
::= { pwCepPerfCurrentEntry 12 }
pwCepPerfCurrentJtrBfrUnderruns OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times a packet needed to be played out and the
jitter buffer was empty."
::= { pwCepPerfCurrentEntry 13 }
pwCepPerfCurrentPktsMalformed OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets detected with unexpected size or bad
headers stack."
::= { pwCepPerfCurrentEntry 14 }
pwCepPerfCurrentSummaryErrors OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A summary of all the packet-error types above (from
missing packets to bad length packets)."
::= { pwCepPerfCurrentEntry 15 }
pwCepPerfCurrentESs OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of Errored
Seconds encountered."
::= { pwCepPerfCurrentEntry 16 }
pwCepPerfCurrentSESs OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Severely Errored Seconds encountered."
::= { pwCepPerfCurrentEntry 17 }
pwCepPerfCurrentUASs OBJECT-TYPE
SYNTAX PerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Unavailable Seconds encountered."
::= { pwCepPerfCurrentEntry 18 }
pwCepPerfCurrentFC OBJECT-TYPE
SYNTAX PerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CEP Failure Counts (FC-CEP). The number of CEP failure
events. A failure event begins when the LOPS failure
is declared and ends when the failure is cleared. A
failure event that begins in one period and ends in
another period is counted only in the period in which
it begins."
::= { pwCepPerfCurrentEntry 19 }
-- End CEP PW Performance Current Interval Table
-- CEP Performance 15-Minute Interval Table
pwCepPerfIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF PwCepPerfIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides per-CEP PW performance information,
much like the pwCepPerfCurrentTable above. However,
these counts represent historical 15-minute intervals.
Typically, this table will have a maximum of 96 entries
for a 24-hour period but is not limited to this.
NOTE: Counter64 objects are used here; Counter32 is
too small for OC-768 CEP PWs."
::= { pwCepObjects 6 }
pwCepPerfIntervalEntry OBJECT-TYPE
SYNTAX PwCepPerfIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by the agent for
every pwCepPerfCurrentEntry that is 15 minutes old.
The contents of the Current entry are copied to the new
entry here. The Current entry then resets its counts
to zero for the next current 15-minute interval.
pwCepIndex is found in the pwCepCfg table."
INDEX { pwIndex, pwCepPerfIntervalNumber }
::= { pwCepPerfIntervalTable 1 }
PwCepPerfIntervalEntry ::= SEQUENCE {
pwCepPerfIntervalNumber Integer32,
pwCepPerfIntervalValidData TruthValue,
pwCepPerfIntervalReset INTEGER,
pwCepPerfIntervalTimeElapsed HCPerfTimeElapsed,
pwCepPerfIntervalDbaInPacketsHC HCPerfIntervalCount,
pwCepPerfIntervalDbaOutPacketsHC HCPerfIntervalCount,
pwCepPerfIntervalInNegPtrAdjust PerfIntervalCount,
pwCepPerfIntervalInPosPtrAdjust PerfIntervalCount,
pwCepPerfIntervalInPtrAdjustSecs PerfIntervalCount,
pwCepPerfIntervalOutNegPtrAdjust PerfIntervalCount,
pwCepPerfIntervalOutPosPtrAdjust PerfIntervalCount,
pwCepPerfIntervalOutPtrAdjustSecs PerfIntervalCount,
pwCepPerfIntervalAbsPtrAdjust Integer32,
pwCepPerfIntervalMissingPkts PerfIntervalCount,
pwCepPerfIntervalPktsOoseq PerfIntervalCount,
pwCepPerfIntervalPktsOoRngDropped PerfIntervalCount,
pwCepPerfIntervalJtrBfrUnderruns PerfIntervalCount,
pwCepPerfIntervalPktsMalformed PerfIntervalCount,
pwCepPerfIntervalSummaryErrors PerfIntervalCount,
pwCepPerfIntervalESs PerfIntervalCount,
pwCepPerfIntervalSESs PerfIntervalCount,
pwCepPerfIntervalUASs PerfIntervalCount,
pwCepPerfIntervalFC PerfIntervalCount
}
pwCepPerfIntervalNumber OBJECT-TYPE
SYNTAX Integer32 (1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number (between 1 and 96 to cover a 24-hour
period) that identifies the interval for which the set
of statistics is available. The interval identified by 1
is the most recently completed 15-minute interval, and
the interval identified by N is the interval immediately
preceding the one identified by N-1. The minimum range of
N is 1 through 4. The default range is 1 through 32. The
maximum range of N is 1 through 96."
::= { pwCepPerfIntervalEntry 1 }
pwCepPerfIntervalValidData OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this interval
is valid."
::= { pwCepPerfIntervalEntry 2 }
pwCepPerfIntervalReset OBJECT-TYPE
SYNTAX INTEGER {
reset (1),
normal(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used in cases where the user knows that the errors
within this interval should not be counted. Writing
'reset' sets all error counts to zero. The value of
0 is not used here due to issues with
implementations."
::= { pwCepPerfIntervalEntry 3 }
pwCepPerfIntervalTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The duration of a particular interval in seconds.
Adjustments in the system's time-of-day clock may
cause the interval to be greater or less than the
normal value. Therefore, this actual interval value
is provided."
::= { pwCepPerfIntervalEntry 4 }
pwCepPerfIntervalDbaInPacketsHC OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of DBA packets received."
::= { pwCepPerfIntervalEntry 5 }
pwCepPerfIntervalDbaOutPacketsHC OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of DBA packets sent."
::= { pwCepPerfIntervalEntry 6 }
-- Pointer adjustment stats
pwCepPerfIntervalInNegPtrAdjust OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of negative pointer adjustments sent on the
SONET path based on CEP pointer adjustments received."
::= { pwCepPerfIntervalEntry 7 }
pwCepPerfIntervalInPosPtrAdjust OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of positive pointer adjustments sent on the
SONET path based on CEP pointer adjustments received."
::= { pwCepPerfIntervalEntry 8 }
pwCepPerfIntervalInPtrAdjustSecs OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of seconds in which a positive or negative
pointer adjustment was sent on the SONET path."
::= { pwCepPerfIntervalEntry 9 }
pwCepPerfIntervalOutNegPtrAdjust OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of negative pointer adjustments seen on the
SONET path and encoded onto sent CEP packets."
::= { pwCepPerfIntervalEntry 10 }
pwCepPerfIntervalOutPosPtrAdjust OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of positive pointer adjustments seen on the
SONET path and encoded onto sent CEP packets."
::= { pwCepPerfIntervalEntry 11 }
pwCepPerfIntervalOutPtrAdjustSecs OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of seconds in which a positive or negative
pointer adjustment was seen on the SONET path."
::= { pwCepPerfIntervalEntry 12 }
pwCepPerfIntervalAbsPtrAdjust OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The relative adjustment drift between inbound
and outbound streams.
It is calculated as absolute value of:
(InPosPtrAdjust - InNegPtrAdjust) -
(OutPosPtrAdjust - OutNegPtrAdjust)"
::= { pwCepPerfIntervalEntry 13 }
pwCepPerfIntervalMissingPkts OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of missing packets (as detected via CEP header
sequence number gaps)."
::= { pwCepPerfIntervalEntry 14 }
pwCepPerfIntervalPktsOoseq OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets detected out of sequence (via CEP
header sequence numbers) but successfully reordered.
Note: Some implementations mat not support this
feature (see pwCepCfgPktReorder)."
::= { pwCepPerfIntervalEntry 15 }
pwCepPerfIntervalPktsOoRngDropped OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets detected out of range (via CEP
header sequence numbers) and could not be reordered
or could not fit in the jitter buffer."
::= { pwCepPerfIntervalEntry 16 }
pwCepPerfIntervalJtrBfrUnderruns OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times a packet needed to be played
out and the jitter buffer was empty."
::= { pwCepPerfIntervalEntry 17 }
pwCepPerfIntervalPktsMalformed OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets detected with unexpected size or bad
headers stack."
::= { pwCepPerfIntervalEntry 18 }
pwCepPerfIntervalSummaryErrors OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A summary of all the packet-error types above (from
missing packets to bad length packets)."
::= { pwCepPerfIntervalEntry 19 }
pwCepPerfIntervalESs OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of Errored
Seconds encountered."
::= { pwCepPerfIntervalEntry 20 }
pwCepPerfIntervalSESs OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Severely Errored Seconds encountered."
::= { pwCepPerfIntervalEntry 21 }
pwCepPerfIntervalUASs OBJECT-TYPE
SYNTAX PerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
Unavailable Seconds encountered."
::= { pwCepPerfIntervalEntry 22 }
pwCepPerfIntervalFC OBJECT-TYPE
SYNTAX PerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CEP Failure Counts (FC-CEP). The number of CEP failure
events. A failure event begins when the LOPS failure
is declared and ends when the failure is cleared. A
failure event that begins in one period and ends in
another period is counted only in the period in which
it begins."
::= { pwCepPerfIntervalEntry 23 }
-- End CEP Performance 15-Minute Interval Table
-- CEP Performance 1-Day Table
pwCepPerf1DayIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF PwCepPerf1DayIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides per CEP PW performance information,
the current day's measurement, and the previous day's
interval.
In the extreme case where one of the error counters has
overflowed during the one-day interval, the error counter
MUST NOT wrap around and MUST return the maximum value."
::= { pwCepObjects 7 }
pwCepPerf1DayIntervalEntry OBJECT-TYPE
SYNTAX PwCepPerf1DayIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry is created in this table by the agent for
every entry in the pwCepTable and for each day
interval up to the number of supported historical
intervals."
INDEX { pwIndex, pwCepPerf1DayIntervalNumber }
::= { pwCepPerf1DayIntervalTable 1 }
PwCepPerf1DayIntervalEntry ::= SEQUENCE {
pwCepPerf1DayIntervalNumber Unsigned32,
pwCepPerf1DayIntervalValidData TruthValue,
pwCepPerf1DayIntervalMoniSecs HCPerfTimeElapsed,
pwCepPerf1DayIntervalDbaInPacketsHC Counter64,
pwCepPerf1DayIntervalDbaOutPacketsHC Counter64,
pwCepPerf1DayIntervalInNegPtrAdjust Counter32,
pwCepPerf1DayIntervalInPosPtrAdjust Counter32,
pwCepPerf1DayIntervalInPtrAdjustSecs Counter32,
pwCepPerf1DayIntervalOutNegPtrAdjust Counter32,
pwCepPerf1DayIntervalOutPosPtrAdjust Counter32,
pwCepPerf1DayIntervalOutPtrAdjustSecs Counter32,
pwCepPerf1DayIntervalAbsPtrAdjust Integer32,
pwCepPerf1DayIntervalMissingPkts Counter32,
pwCepPerf1DayIntervalPktsOoseq Counter32,
pwCepPerf1DayIntervalPktsOoRngDropped Counter32,
pwCepPerf1DayIntervalJtrBfrUnderruns Counter32,
pwCepPerf1DayIntervalPktsMalformed Counter32,
pwCepPerf1DayIntervalSummaryErrors Counter32,
pwCepPerf1DayIntervalESs Counter32,
pwCepPerf1DayIntervalSESs Counter32,
pwCepPerf1DayIntervalUASs Counter32,
pwCepPerf1DayIntervalFC Counter32
}
pwCepPerf1DayIntervalNumber OBJECT-TYPE
SYNTAX Unsigned32(1..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"History Data Interval number. Interval 1 is the current day
measurement period; interval 2 is the most recent previous
day; and interval 30 is 31 days ago."
::= { pwCepPerf1DayIntervalEntry 1 }
pwCepPerf1DayIntervalValidData OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this interval
is valid."
::= { pwCepPerf1DayIntervalEntry 2 }
pwCepPerf1DayIntervalMoniSecs OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time in the 1-day interval over which the
performance monitoring information is actually counted.
This value will be the same as the interval duration except
in situations where performance monitoring data could not
be collected for any reason or the agent clock was
adjusted."
::= { pwCepPerf1DayIntervalEntry 3 }
pwCepPerf1DayIntervalDbaInPacketsHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of DBA packets received."
::= { pwCepPerf1DayIntervalEntry 4 }
pwCepPerf1DayIntervalDbaOutPacketsHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of DBA packets sent."
::= { pwCepPerf1DayIntervalEntry 5 }
-- Pointer adjustment stats
pwCepPerf1DayIntervalInNegPtrAdjust OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of negative pointer adjustments sent on the
SONET path based on CEP pointer adjustments received."
::= { pwCepPerf1DayIntervalEntry 6 }
pwCepPerf1DayIntervalInPosPtrAdjust OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of positive pointer adjustments sent on the
SONET path based on CEP pointer adjustments received."
::= { pwCepPerf1DayIntervalEntry 7 }
pwCepPerf1DayIntervalInPtrAdjustSecs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of seconds in which a positive or negative pointer
adjustment was sent on the SONET path."
::= { pwCepPerf1DayIntervalEntry 8 }
pwCepPerf1DayIntervalOutNegPtrAdjust OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of negative pointer adjustments seen on the
SONET path and encoded onto sent CEP packets."
::= { pwCepPerf1DayIntervalEntry 9 }
pwCepPerf1DayIntervalOutPosPtrAdjust OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of positive pointer adjustments seen on the
SONET path and encoded onto sent CEP packets."
::= { pwCepPerf1DayIntervalEntry 10 }
pwCepPerf1DayIntervalOutPtrAdjustSecs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of seconds in which a positive or negative pointer
adjustment was seen on the SONET path."
::= { pwCepPerf1DayIntervalEntry 11 }
pwCepPerf1DayIntervalAbsPtrAdjust OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The relative adjustment of drift between inbound
and outbound streams. It is calculated as absolute
value of:
(InPosPtrAdjust - InNegPtrAdjust) -
(OutPosPtrAdjust - OutNegPtrAdjust)"
::= { pwCepPerf1DayIntervalEntry 12 }
pwCepPerf1DayIntervalMissingPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of missing packets (as detected via CEP header
sequence number gaps)."
::= { pwCepPerf1DayIntervalEntry 13 }
pwCepPerf1DayIntervalPktsOoseq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets detected out of sequence (via CEP
header sequence numbers) but successfully reordered.
Note: Some implementations may not support this feature
(see pwCepCfgPktReorder)."
::= { pwCepPerf1DayIntervalEntry 14 }
pwCepPerf1DayIntervalPktsOoRngDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets detected out of range (via CEP header
sequence numbers) and could not be reordered or could not
fit in the jitter buffer."
::= { pwCepPerf1DayIntervalEntry 15 }
pwCepPerf1DayIntervalJtrBfrUnderruns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times a packet needed to be played out, and the
jitter buffer was empty."
::= { pwCepPerf1DayIntervalEntry 16 }
pwCepPerf1DayIntervalPktsMalformed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets detected with unexpected size or bad
headers stack."
::= { pwCepPerf1DayIntervalEntry 17 }
pwCepPerf1DayIntervalSummaryErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A summary of all the packet-error types above (from
missing packets to bad length packets)."
::= { pwCepPerf1DayIntervalEntry 18 }
pwCepPerf1DayIntervalESs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of Errored
Seconds encountered."
::= { pwCepPerf1DayIntervalEntry 19 }
pwCepPerf1DayIntervalSESs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of Severely
Errored Seconds. See pwCepCfgMissingPktsToSes."
::= { pwCepPerf1DayIntervalEntry 20 }
pwCepPerf1DayIntervalUASs OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter associated with the number of
unavailable seconds. See pwCepCfgSesToUAS.
NOTE: When first entering the UAS state, the number
of SesToUas is added to this object; then, as each
additional UAS occurs, this object increments by one.
NOTE: Similar to [RFC3592], if the agent chooses to update
the various performance statistics in real time, it must
be prepared to retroactively reduce the ES and SES counts
(by the value of pwCepCfgSesToUas) and increase the UAS
count (by that same value) when it determines that UAS
state has been entered."
::= { pwCepPerf1DayIntervalEntry 21 }
pwCepPerf1DayIntervalFC OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CEP Failure Counts (FC-CEP). The number of CEP failure
events. A failure event begins when the LOPS failure
is declared and ends when the failure is cleared."
::= { pwCepPerf1DayIntervalEntry 22 }
-- End of CEP Performance 1-Day Table
-- Conformance information
pwCepGroups OBJECT IDENTIFIER ::= { pwCepConformance 1 }
pwCepCompliances OBJECT IDENTIFIER ::= { pwCepConformance 2 }
-- Compliance statement for full compliant implementations
pwCepModuleFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents that support
full CEP PW configuration through this MIB module."
MODULE -- this module
MANDATORY-GROUPS { pwCepGroup,
pwCepCfgGroup,
pwCepPerfCurrentGroup,
pwCepPerfIntervalGroup,
pwCepPerf1DayIntervalGroup
}
GROUP pwCepFractionalGroup
DESCRIPTION "This group is only mandatory for implementations
that support fractional SPE."
GROUP pwCepFractionalSts1Vc3Group
DESCRIPTION "This group is only mandatory for implementations
that support the fractional STS-1/VC-3."
GROUP pwCepFractionalVc4Group
DESCRIPTION "This group is only mandatory for implementations
that support the fractional VC-4."
GROUP pwCepSignalingGroup
DESCRIPTION "This group is only mandatory for implementations
that support the CEP PW signaling."
OBJECT pwCepType
SYNTAX INTEGER { spe(1) }
MIN-ACCESS read-only
DESCRIPTION "The support of the value vt(2) or fracSpe(3) is
optional. If either of these options are
supported, read-write access is not required."
OBJECT pwCepSonetPayloadLength
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only the default values (which are
based on the pwCepType)."
OBJECT pwCepCfgMinPktLength
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepCfgEnableDBA
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepCfgRtpHdrSuppress
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that do not support RTP header for CEP
connections."
OBJECT pwCepCfgConsecPktsInsync
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepCfgConsecMissingOutSync
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepCfgPktErrorPlayOutValue
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepCfgMissingPktsToSes
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepCfgSesToUas
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepCfgSecsToExitUas
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepCfgName
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepCfgRowStatus
SYNTAX RowStatus { active(1), notInService(2),
notReady(3) }
WRITE-SYNTAX RowStatus { active(1), notInService(2),
createAndGo(4), destroy(6)
}
DESCRIPTION "Support for createAndWait is not required."
OBJECT pwCepFracMode
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepFracAsync
SYNTAX PwCepFracAsyncMap { other(1) }
MIN-ACCESS read-only
DESCRIPTION "Support for ds3(2) or e3(3) and read-write access
is not required if the implementations do not
support these options."
OBJECT pwCepFracVtgMap
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepFracEbm
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
where the EBM is derived from configuration in
other MIB modules."
OBJECT pwCepFracSdhVc4Mode
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepFracSdhVc4Tu3Map1
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepFracSdhVc4Tu3Map2
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepFracSdhVc4Tu3Map3
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepFracSdhVc4Tug2Map1
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepFracSdhVc4Tug2Map2
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepFracSdhVc4Tug2Map3
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
that support only a single predefined value."
OBJECT pwCepFracSdhVc4Ebm1
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
where the EBM is derived from configuration in
other MIB modules."
OBJECT pwCepFracSdhVc4Ebm2
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
where the EBM is derived from configuration in
other MIB modules."
OBJECT pwCepFracSdhVc4Ebm3
MIN-ACCESS read-only
DESCRIPTION "Write access is not required for implementations
where the EBM is derived from configuration in
other MIB modules."
OBJECT pwCepFracRowStatus
SYNTAX RowStatus { active(1), notInService(2),
notReady(3) }
WRITE-SYNTAX RowStatus { active(1), notInService(2),
createAndGo(4), destroy(6)
}
DESCRIPTION "Support for createAndWait is not required."
::= { pwCepCompliances 1 }
-- Compliance requirement for read-only compliant implementations
pwCepModuleReadOnlyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents that provide
read-only support for the PW CEP MIB Module. Such
devices can be monitored but cannot be configured
using this MIB module."
MODULE -- this module
MANDATORY-GROUPS { pwCepGroup,
pwCepCfgGroup,
pwCepPerfCurrentGroup,
pwCepPerfIntervalGroup,
pwCepPerf1DayIntervalGroup
}
GROUP pwCepFractionalGroup
DESCRIPTION "This group is only mandatory for implementations
that support fractional SPE."
GROUP pwCepFractionalSts1Vc3Group
DESCRIPTION "This group is only mandatory for implementations
that support the fractional STS-1/VC-3."
GROUP pwCepFractionalVc4Group
DESCRIPTION "This group is only mandatory for implementations
that support the fractional VC-4."
GROUP pwCepSignalingGroup
DESCRIPTION "This group is only mandatory for implementations
that support the CEP PW signaling."
OBJECT pwCepType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepSonetIfIndex
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepCfgIndex
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepSonetPayloadLength
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepCfgMinPktLength
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepCfgEnableDBA
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepCfgRtpHdrSuppress
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepCfgJtrBfrDepth
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepCfgConsecPktsInsync
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepCfgConsecMissingOutSync
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepCfgPktErrorPlayOutValue
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepCfgMissingPktsToSes
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepCfgSesToUas
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepCfgSecsToExitUas
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepCfgRowStatus
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepCfgStorageType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepFracMode
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepFracAsync
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepFracVtgMap
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepFracEbm
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepFracSdhVc4Mode
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepFracSdhVc4Tu3Map1
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepFracSdhVc4Tu3Map2
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepFracSdhVc4Tu3Map3
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepFracSdhVc4Tug2Map1
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepFracSdhVc4Tug2Map2
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepFracSdhVc4Tug2Map3
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepFracSdhVc4Ebm1
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepFracSdhVc4Ebm2
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepFracSdhVc4Ebm3
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepFracRowStatus
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCepFracStorageType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
::= { pwCepCompliances 2 }
-- Units of conformance
pwCepGroup OBJECT-GROUP
OBJECTS {
pwCepType,
pwCepSonetIfIndex,
pwCepSonetConfigErrorOrStatus,
pwCepCfgIndex,
pwCepTimeElapsed,
pwCepValidIntervals,
pwCepIndications,
pwCepLastEsTimeStamp
}
STATUS current
DESCRIPTION
"Collection of objects for basic CEP PW config and
status."
::= { pwCepGroups 1 }
pwCepSignalingGroup OBJECT-GROUP
OBJECTS {
pwCepPeerCepOption
}
STATUS current
DESCRIPTION
"Collection of objects required if the network element
support CEP connections signaling."
::= { pwCepGroups 2 }
pwCepCfgGroup OBJECT-GROUP
OBJECTS {
pwCepCfgIndexNext,
pwCepSonetPayloadLength,
pwCepCfgMinPktLength,
pwCepCfgPktReorder,
pwCepCfgEnableDBA,
pwCepCfgRtpHdrSuppress,
pwCepCfgJtrBfrDepth,
pwCepCfgConsecPktsInsync,
pwCepCfgConsecMissingOutSync,
pwCepCfgPktErrorPlayOutValue,
pwCepCfgMissingPktsToSes,
pwCepCfgSesToUas,
pwCepCfgSecsToExitUas,
pwCepCfgName,
pwCepCfgRowStatus,
pwCepCfgStorageType
}
STATUS current
DESCRIPTION
"Collection of detailed objects needed to
configure CEP PWs."
::= { pwCepGroups 3 }
pwCepPerfCurrentGroup OBJECT-GROUP
OBJECTS {
pwCepPerfCurrentDbaInPacketsHC,
pwCepPerfCurrentDbaOutPacketsHC,
pwCepPerfCurrentInNegPtrAdjust,
pwCepPerfCurrentInPosPtrAdjust,
pwCepPerfCurrentInPtrAdjustSecs,
pwCepPerfCurrentOutNegPtrAdjust,
pwCepPerfCurrentOutPosPtrAdjust,
pwCepPerfCurrentOutPtrAdjustSecs,
pwCepPerfCurrentAbsPtrAdjust,
pwCepPerfCurrentMissingPkts,
pwCepPerfCurrentPktsOoseq,
pwCepPerfCurrentPktsOoRngDropped,
pwCepPerfCurrentJtrBfrUnderruns,
pwCepPerfCurrentPktsMalformed,
pwCepPerfCurrentSummaryErrors,
pwCepPerfCurrentESs,
pwCepPerfCurrentSESs,
pwCepPerfCurrentUASs,
pwCepPerfCurrentFC
}
STATUS current
DESCRIPTION
"Collection of statistics objects for CEP PWs."
::= { pwCepGroups 4 }
pwCepPerfIntervalGroup OBJECT-GROUP
OBJECTS {
pwCepPerfIntervalValidData,
pwCepPerfIntervalReset,
pwCepPerfIntervalTimeElapsed,
pwCepPerfIntervalDbaInPacketsHC,
pwCepPerfIntervalDbaOutPacketsHC,
pwCepPerfIntervalInNegPtrAdjust,
pwCepPerfIntervalInPosPtrAdjust,
pwCepPerfIntervalInPtrAdjustSecs,
pwCepPerfIntervalOutNegPtrAdjust,
pwCepPerfIntervalOutPosPtrAdjust,
pwCepPerfIntervalOutPtrAdjustSecs,
pwCepPerfIntervalAbsPtrAdjust,
pwCepPerfIntervalMissingPkts,
pwCepPerfIntervalPktsOoseq,
pwCepPerfIntervalPktsOoRngDropped,
pwCepPerfIntervalJtrBfrUnderruns,
pwCepPerfIntervalPktsMalformed,
pwCepPerfIntervalSummaryErrors,
pwCepPerfIntervalESs,
pwCepPerfIntervalSESs,
pwCepPerfIntervalUASs,
pwCepPerfIntervalFC
}
STATUS current
DESCRIPTION
"Collection of statistics objects for CEP PWs."
::= { pwCepGroups 5 }
pwCepPerf1DayIntervalGroup OBJECT-GROUP
OBJECTS {
pwCepPerf1DayIntervalValidData,
pwCepPerf1DayIntervalMoniSecs,
pwCepPerf1DayIntervalDbaInPacketsHC,
pwCepPerf1DayIntervalDbaOutPacketsHC,
pwCepPerf1DayIntervalInNegPtrAdjust,
pwCepPerf1DayIntervalInPosPtrAdjust,
pwCepPerf1DayIntervalInPtrAdjustSecs,
pwCepPerf1DayIntervalOutNegPtrAdjust,
pwCepPerf1DayIntervalOutPosPtrAdjust,
pwCepPerf1DayIntervalOutPtrAdjustSecs,
pwCepPerf1DayIntervalAbsPtrAdjust,
pwCepPerf1DayIntervalMissingPkts,
pwCepPerf1DayIntervalPktsOoseq,
pwCepPerf1DayIntervalPktsOoRngDropped,
pwCepPerf1DayIntervalJtrBfrUnderruns,
pwCepPerf1DayIntervalPktsMalformed,
pwCepPerf1DayIntervalSummaryErrors,
pwCepPerf1DayIntervalESs,
pwCepPerf1DayIntervalSESs,
pwCepPerf1DayIntervalUASs,
pwCepPerf1DayIntervalFC
}
STATUS current
DESCRIPTION
"Collection of statistics objects for CEP PWs."
::= { pwCepGroups 6 }
pwCepFractionalGroup OBJECT-GROUP
OBJECTS {
pwCepFracRowStatus,
pwCepFracStorageType
}
STATUS current
DESCRIPTION
"Collection of fractional SPE objects. These objects
are optional and should be supported only if
fractional SPE is supported within the network
element."
::= { pwCepGroups 7 }
pwCepFractionalSts1Vc3Group OBJECT-GROUP
OBJECTS {
pwCepFracMode,
pwCepFracConfigError,
pwCepFracAsync,
pwCepFracVtgMap,
pwCepFracEbm,
pwCepFracPeerEbm
}
STATUS current
DESCRIPTION
"Collection of fractional STS-1/VC3 objects. These
objects are optional and should be supported only if
fractional STS-1/VC3 is supported within the network
element."
::= { pwCepGroups 8 }
pwCepFractionalVc4Group OBJECT-GROUP
OBJECTS {
pwCepFracSdhVc4Mode,
pwCepFracSdhVc4Tu3Map1,
pwCepFracSdhVc4Tu3Map2,
pwCepFracSdhVc4Tu3Map3,
pwCepFracSdhVc4Tug2Map1,
pwCepFracSdhVc4Tug2Map2,
pwCepFracSdhVc4Tug2Map3,
pwCepFracSdhVc4Ebm1,
pwCepFracSdhVc4Ebm2,
pwCepFracSdhVc4Ebm3,
pwCepFracSdhVc4PeerEbm1,
pwCepFracSdhVc4PeerEbm2,
pwCepFracSdhVc4PeerEbm3
}
STATUS current
DESCRIPTION
"Collection of fractional VC4 objects. These objects
are optional and should be supported only if
fractional VC4 is supported within the network
element."
::= { pwCepGroups 9 }
END
8. Security Considerations
It is clear that this MIB module is potentially useful for monitoring
CEP PWs. This MIB can also be used for configuration of certain
objects, and anything that can be configured can be incorrectly
configured, with potentially disastrous results.
There are number of management objects defined in this MIB module
with a MAX-ACCESS clause of read-write and/or read-create. Such
objects may be considered sensitive or vulnerable in some network
environments. The support for SET operations in a non-secure
environment without proper protection can have a negative effect on
network operations. These are the tables and objects and their
sensitivity/vulnerability:
o The pwCepTable, pwCepCfgTable, and pwCepFracTable contain objects
to CEP PW parameters on a Provider Edge (PE) device. Unauthorized
access to objects in these tables could result in disruption of
traffic on the network. The use of stronger mechanisms such as
SNMPv3 security should be considered where possible.
Specifically, SNMPv3 VACM and USM MUST be used with any v3 agent
which implements this MIB module. Administrators should consider
whether read access to these objects should be allowed, since read
access may be undesirable under certain circumstances.
Some of the readable objects in this MIB module (i.e., objects with a
MAX-ACCESS other than not-accessible) may be considered sensitive or
vulnerable in some network environments. It is thus important to
control even GET and/or NOTIFY access to these objects and possibly
to even encrypt the values of these objects when sending them over
the network via SNMP. These are the tables and objects and their
sensitivity/vulnerability:
o The pwCepTable, pwCepPerfCurrentTable, pwCepPerfIntervalTable, and
pwCepPerf1DayIntervalTable collectively show the CEP pseudowire
connectivity topology and its performance characteristics. If an
Administrator does not want to reveal this information, then these
tables should be considered sensitive/vulnerable.
SNMP versions prior to SNMPv3 did not include adequate security.
Even if the network itself is secure (for example, by using IPsec),
there is no control as to who on the secure network is allowed to
access and GET/SET (read/change/create/delete) the objects in this
MIB module.
It is RECOMMENDED that implementers consider the security features
provided by the SNMPv3 framework (see [RFC3410], section 8),
including full support for the SNMPv3 cryptographic mechanisms (for
authentication and privacy).
Further, deployment of SNMP versions prior to SNMPv3 is NOT
RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
enable cryptographic security. It is then a customer/operator
responsibility to ensure that the SNMP entity giving access to an
instance of this MIB module is properly configured to give access to
the objects only to those principals (users) that have legitimate
rights to indeed GET or SET (change/create/delete) them.
9. IANA Considerations
The MIB module in this document uses the following IANA-assigned
OBJECT IDENTIFIER values recorded in the SMI Numbers registry:
Descriptor OBJECT IDENTIFIER value
---------- -----------------------
pwCepStdMIB { mib-2 200 }
10. References
10.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC5542] Nadeau, T., Ed., Zelig, D., Ed., and O. Nicklass, Ed.,
"Definitions of Textual Conventions for Pseudowire (PW)
Management", RFC 5542, May 2009.
[RFC5601] Nadeau, T., Ed., and D. Zelig, Ed., "Pseudowire (PW)
Management Information Base (MIB)", RFC 5601, July 2009.
[RFC2578] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
"Structure of Management Information Version 2 (SMIv2)",
STD 58, RFC 2578, April 1999.
[RFC2579] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
"Textual Conventions for SMIv2", STD 58, RFC 2579, April
1999.
[RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
"Conformance Statements for SMIv2", STD 58, RFC 2580,
April 1999.
[RFC2863] McCloghrie, K. and F. Kastenholz, "The Interfaces Group
MIB", RFC 2863, June 2000.
[RFC3411] Harrington, D., Presuhn, R., and B. Wijnen, "An
Architecture for Describing Simple Network Management
Protocol (SNMP) Management Frameworks", STD 62, RFC 3411,
December 2002.
[RFC3592] Tesink, K., "Definitions of Managed Objects for the
Synchronous Optical Network/Synchronous Digital Hierarchy
(SONET/SDH) Interface Type", RFC 3592, September 2003.
[RFC3593] Tesink, K., Ed., "Textual Conventions for MIB Modules
Using Performance History Based on 15 Minute Intervals",
RFC 3593, September 2003.
[RFC3705] Ray, B. and R. Abbi, "High Capacity Textual Conventions
for MIB Modules Using Performance History Based on 15
Minute Intervals", RFC 3705, February 2004.
[RFC4842] Malis, A., Pate, P., Cohen, R., Ed., and D. Zelig,
"Synchronous Optical Network/Synchronous Digital Hierarchy
(SONET/SDH) Circuit Emulation over Packet (CEP)", RFC
4842, April 2007.
10.2. Informative References
[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart,
"Introduction and Applicability Statements for Internet-
Standard Management Framework", RFC 3410, December 2002.
[RFC3985] Bryant, S., Ed., and P. Pate, Ed., "Pseudo Wire Emulation
Edge-to-Edge (PWE3) Architecture", RFC 3985, March 2005.
11. Contributors
The individuals listed below are co-authors of this document. Dave
Danenberg was the editor of this document at the pre-WG version of
the PW MIB modules.
Andrew G. Malis - Tellabs
Dave Danenberg - Litchfield Communications
Scott C. Park - Litchfield Communications
Authors' Addresses
David Zelig (editor)
PMC-Sierra
4 Hasadnaot St.
Herzliya Pituach
Israel, 46120
Phone: +972-9-962-8000
Email: david_zelig@pmc-sierra.com
Ron Cohen (editor)
Resolute Networks
2480 Sand Hill Road, Suite 200
Menlo Park, CA 94025
USA
EMail: ronc@resolutenetworks.com
Thomas D. Nadeau (editor)
CA Technologies
273 Corporate Dr
Portsmouth, NH 03801
USA
Phone: +1 800 225-5224
EMail: Thomas.Nadeau@ca.com