| Rfc | 8054 |
|---|
| Title | Network News Transfer Protocol (NNTP) Extension for Compression |
|---|
| Author | K.
Murchison, J. Elie |
|---|
| Date | January 2017 |
|---|
| Format: | TXT, HTML |
|---|
| Status: | PROPOSED STANDARD |
|---|
|
Internet Engineering Task Force (IETF) K. Murchison
Request for Comments: 8054 Carnegie Mellon University
Category: Standards Track J. Elie
ISSN: 2070-1721 January 2017
Network News Transfer Protocol (NNTP)
Extension for Compression
Abstract
This document defines an extension to the Network News Transport
Protocol (NNTP) that allows a connection to be effectively and
efficiently compressed between an NNTP client and server.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 7841.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
http://www.rfc-editor.org/info/rfc8054.
Copyright Notice
Copyright (c) 2017 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1. About TLS-Level Compression . . . . . . . . . . . . . . . 3
1.2. Conventions Used in This Document . . . . . . . . . . . . 4
2. The COMPRESS Extension . . . . . . . . . . . . . . . . . . . 4
2.1. Advertising the COMPRESS Extension . . . . . . . . . . . 4
2.2. COMPRESS Command . . . . . . . . . . . . . . . . . . . . 5
2.2.1. Usage . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2.2. Description . . . . . . . . . . . . . . . . . . . . . 6
2.2.3. Examples . . . . . . . . . . . . . . . . . . . . . . 8
3. Compression Efficiency . . . . . . . . . . . . . . . . . . . 11
4. DEFLATE Specificities . . . . . . . . . . . . . . . . . . . . 12
5. Augmented BNF Syntax for the COMPRESS Extension . . . . . . . 13
5.1. Commands . . . . . . . . . . . . . . . . . . . . . . . . 13
5.2. Capability Entries . . . . . . . . . . . . . . . . . . . 13
5.3. General Non-terminals . . . . . . . . . . . . . . . . . . 13
6. Summary of Response Codes . . . . . . . . . . . . . . . . . . 13
7. Security Considerations . . . . . . . . . . . . . . . . . . . 14
8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 15
8.1. "NNTP Compression Algorithms" Registry . . . . . . . . . 15
8.1.1. Algorithm Name Registration Procedure . . . . . . . . 16
8.1.2. Comments on Algorithm Registrations . . . . . . . . . 17
8.1.3. Change Control . . . . . . . . . . . . . . . . . . . 17
8.2. Registration of the DEFLATE Compression Algorithm . . . . 18
8.3. Registration of the NNTP COMPRESS Extension . . . . . . . 18
9. References . . . . . . . . . . . . . . . . . . . . . . . . . 20
9.1. Normative References . . . . . . . . . . . . . . . . . . 20
9.2. Informative References . . . . . . . . . . . . . . . . . 20
Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . . 22
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 23
1. Introduction
The goal of COMPRESS is to reduce the bandwidth usage of NNTP.
Compared to PPP compression [RFC1962] and modem-based compression
([MNP] and [V42bis]), COMPRESS offers greater compression efficiency.
COMPRESS can be used together with Transport Layer Security (TLS)
[RFC5246], Simple Authentication and Security Layer (SASL) encryption
[RFC4422], Virtual Private Networks (VPNs), etc.
The point of COMPRESS as an NNTP extension is to act as a compression
layer, similar to a security layer like the one negotiated by
STARTTLS [RFC4642]. Therefore, compression can be beneficial to all
NNTP commands sent or received after the use of COMPRESS. This
facility responds to a long-standing need for NNTP to compress data.
It is currently addressed only partially by unstandardized commands
like XZVER, XZHDR, XFEATURE COMPRESS, or MODE COMPRESS. Yet, these
commands are not wholly satisfactory because they enable compression
only for the responses sent by the news server. In comparison, the
COMPRESS command permits the compression of data sent by both the
client and the server, and removes the constraint of having to
implement compression separately in each NNTP command. Besides, the
compression level can be dynamically adjusted and optimized at any
time during the connection, which even allows disabling compression
for certain commands, if needed. If the news client wants to stop
compression on a particular connection, it can simply use QUIT
([RFC3977], Section 5.4) and establish a new connection. For these
reasons, using other NNTP commands than COMPRESS to enable
compression is discouraged once COMPRESS is supported.
In order to increase interoperability, it is desirable to have as few
different compression algorithms as possible, so this document
specifies only one. The DEFLATE algorithm (defined in [RFC1951])
MUST be implemented as part of this extension. This compression
algorithm is standard, widely available, and fairly efficient.
This specification should be read in conjunction with the NNTP base
specification [RFC3977]. In the case of a conflict between these two
documents, [RFC3977] takes precedence.
1.1. About TLS-Level Compression
Though lossless data compression is already possible via the use of
TLS with NNTP [RFC4642], the best current practice is to disable TLS-
level compression as explained in Section 3.3 of [RFC7525]. The
COMPRESS command will permit keeping the compression facility in
NNTP, and control when it is available during a connection.
Compared to TLS-level compression [RFC3749], NNTP COMPRESS has the
following advantages:
o COMPRESS can be implemented easily both by NNTP servers and
clients.
o COMPRESS benefits from an intimate knowledge of the NNTP
protocol's state machine, allowing for dynamic and aggressive
optimization of the underlying compression algorithm's parameters.
o COMPRESS can be activated after authentication has completed, thus
reducing the chances that authentication credentials can be leaked
via, for instance, a CRIME attack ([RFC7457], Section 2.6).
1.2. Conventions Used in This Document
The notational conventions used in this document are the same as
those in [RFC3977], and any term not defined in this document has the
same meaning as it does in that one.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in
[RFC2119].
In the examples, commands from the client are indicated with [C], and
responses from the server are indicated with [S]. The client is the
initiator of the NNTP connection; the server is the other endpoint.
2. The COMPRESS Extension
The COMPRESS extension is used to enable lossless data compression on
an NNTP connection.
This extension provides a new COMPRESS command and has the capability
label COMPRESS.
2.1. Advertising the COMPRESS Extension
A server supporting the COMPRESS command as defined in this document
will advertise the "COMPRESS" capability label in response to the
CAPABILITIES command ([RFC3977], Section 5.2). However, this
capability MUST NOT be advertised once a compression layer is active
(see Section 2.2.2). This capability MAY be advertised both before
and after any use of the MODE READER command ([RFC3977],
Section 5.3), with the same semantics.
The COMPRESS capability label contains a whitespace-separated list of
available compression algorithms. This document defines one
compression algorithm: DEFLATE. This algorithm is mandatory to
implement; it MUST be supported and listed in the advertisement of
the COMPRESS extension.
Future extensions may add additional compression algorithms to this
capability. Unrecognized algorithms MUST be ignored by the client.
Example:
[C] CAPABILITIES
[S] 101 Capability list:
[S] VERSION 2
[S] READER
[S] IHAVE
[S] COMPRESS DEFLATE SHRINK
[S] LIST ACTIVE NEWSGROUPS
[S] .
As the COMPRESS command is related to security because it can weaken
encryption, cached results of CAPABILITIES from a previous session
MUST NOT be relied on, as per Section 12.6 of [RFC3977].
2.2. COMPRESS Command
2.2.1. Usage
This command MUST NOT be pipelined.
Syntax
COMPRESS algorithm
Responses
206 Compression active
403 Unable to activate compression
502 Command unavailable [1]
[1] If a compression layer is already active, COMPRESS is not a valid
command (see Section 2.2.2).
Parameters
algorithm = Name of compression algorithm (e.g., "DEFLATE")
2.2.2. Description
The COMPRESS command instructs the server to use the named
compression algorithm ("DEFLATE" is the only one defined in this
document) for all commands and responses after COMPRESS.
The client MUST NOT send any further commands until it has seen the
result of COMPRESS.
If the requested compression algorithm is syntactically incorrect,
the server MUST reject the COMPRESS command with a 501 response code
([RFC3977], Section 3.2.1). If the requested compression algorithm
is invalid (e.g., is not supported), the server MUST reject the
COMPRESS command with a 503 response code ([RFC3977], Section 3.2.1).
If the server is unable to activate compression for any reason (e.g.,
a server configuration or resource problem), the server MUST reject
the COMPRESS command with a 403 response code ([RFC3977],
Section 3.2.1). Otherwise, in case no other generic response code
representing the situation applies, the server issues a 206 response
code and the compression layer takes effect for both client and
server immediately following the CRLF of the success reply.
Additionally, the client MUST NOT issue a MODE READER command after
activating a compression layer, and a server MUST NOT advertise the
MODE-READER capability.
Both the client and the server MUST know if there is a compression
layer active (for instance, via the previous use of the COMPRESS
command or the negotiation of a TLS-level compression method
[RFC3749]). A client MUST NOT attempt to activate compression (for
instance, via the COMPRESS command) or negotiate a TLS security layer
(because STARTTLS [RFC4642] may activate TLS-level compression) if a
compression layer is already active. A server MUST NOT return the
COMPRESS or STARTTLS capability labels in response to a CAPABILITIES
command received after a compression layer is active, and a server
MUST reply with a 502 response code if a syntactically valid COMPRESS
or STARTTLS command is received while a compression layer is already
active.
In order to help mitigate leaking authentication credentials via, for
instance, a CRIME attack [CRIME], authentication MUST NOT be
attempted after a successful use of the COMPRESS command.
Consequently, a server MUST either list the AUTHINFO capability with
no arguments or not advertise it at all, in response to a
CAPABILITIES command received from an unauthenticated client after a
successful use of the COMPRESS command, and such a client MUST NOT
attempt to utilize any AUTHINFO [RFC4643] commands. This implies
that a server MUST reply with a 502 response code if a syntactically
valid AUTHINFO command is received after a successful use of the
COMPRESS command. (Note that this specification does not change the
behavior of AUTHINFO as described in [RFC4643] independently of TLS-
level compression. Authentication is therefore still allowed, even
though TLS-level compression is active.)
For DEFLATE [RFC1951] (as for many other compression algorithms), the
sending compressor can trade speed against compression ratio. The
receiving decompressor MUST automatically adjust to the parameters
selected by the sender. Consequently, the client and server are both
free to pick the best reasonable rate of compression for the data
they send. Besides, all data that was submitted for compression MUST
be included in the compressed output, and appropriately flushed so as
to ensure that the receiving decompressor can completely decompress
it.
When COMPRESS is combined with TLS [RFC5246] or SASL [RFC4422]
security layers, the processing order of the three layers MUST be
first COMPRESS, then SASL, and finally TLS. That is, before data is
transmitted, it is first compressed. Second, if a SASL security
layer has been negotiated, the compressed data is then signed and/or
encrypted accordingly. Third, if a TLS security layer has been
negotiated, the data from the previous step is signed and/or
encrypted accordingly (with a possible additional TLS-level
compression). When receiving data, the processing order MUST be
reversed. This ensures that before sending, data is compressed
before it is encrypted.
When compression is active and either the client or the server
receives invalid or corrupted compressed data, the receiving end
immediately closes the connection, in response to which the sending
end will do the same.
2.2.3. Examples
Example of layering a TLS security layer and NNTP compression:
[C] CAPABILITIES
[S] 101 Capability list:
[S] VERSION 2
[S] READER
[S] STARTTLS
[S] AUTHINFO
[S] COMPRESS DEFLATE
[S] LIST ACTIVE NEWSGROUPS
[S] .
[C] STARTTLS
[S] 382 Continue with TLS negotiation
[TLS negotiation without compression occurs here]
[Following successful negotiation, all traffic is encrypted]
[C] CAPABILITIES
[S] 101 Capability list:
[S] VERSION 2
[S] READER
[S] AUTHINFO USER
[S] COMPRESS DEFLATE
[S] LIST ACTIVE NEWSGROUPS
[S] .
[C] AUTHINFO USER fred
[S] 381 Enter passphrase
[C] AUTHINFO PASS flintstone
[S] 281 Authentication accepted
[C] CAPABILITIES
[S] 101 Capability list:
[S] VERSION 2
[S] READER
[S] POST
[S] COMPRESS DEFLATE
[S] LIST ACTIVE NEWSGROUPS
[S] .
[C] COMPRESS DEFLATE
[S] 206 Compression active
[Henceforth, all traffic is compressed before being encrypted]
[C] CAPABILITIES
[S] 101 Capability list:
[S] VERSION 2
[S] READER
[S] POST
[S] LIST ACTIVE NEWSGROUPS
[S] .
Example of a server failing to activate compression:
[C] CAPABILITIES
[S] 101 Capability list:
[S] VERSION 2
[S] IHAVE
[S] COMPRESS DEFLATE
[S] .
[C] COMPRESS DEFLATE
[S] 403 Unable to activate compression
Example of attempting to use an unsupported compression algorithm:
[C] CAPABILITIES
[S] 101 Capability list:
[S] VERSION 2
[S] IHAVE
[S] COMPRESS DEFLATE
[S] .
[C] COMPRESS SHRINK
[S] 503 Compression algorithm not supported
Example of a server refusing to compress twice:
[C] CAPABILITIES
[S] 101 Capability list:
[S] VERSION 2
[S] IHAVE
[S] STARTTLS
[S] COMPRESS DEFLATE
[S] .
[C] STARTTLS
[S] 382 Continue with TLS negotiation
[TLS negotiation with compression occurs here]
[Following successful negotiation, all traffic is encrypted]
[C] CAPABILITIES
[S] 101 Capability list:
[S] VERSION 2
[S] IHAVE
[S] .
[C] COMPRESS DEFLATE
[S] 502 Compression already active via TLS
Example of a server refusing to negotiate a TLS security layer after
compression has been activated:
[C] CAPABILITIES
[S] 101 Capability list:
[S] VERSION 2
[S] IHAVE
[S] STARTTLS
[S] COMPRESS DEFLATE
[S] .
[C] COMPRESS DEFLATE
[S] 206 Compression active
[Henceforth, all traffic is compressed]
[C] CAPABILITIES
[S] 101 Capability list:
[S] VERSION 2
[S] IHAVE
[S] .
[C] STARTTLS
[S] 502 DEFLATE compression already active
Example of a server not advertising AUTHINFO arguments after
compression has been activated:
[C] CAPABILITIES
[S] 101 Capability list:
[S] VERSION 2
[S] READER
[S] AUTHINFO USER
[S] COMPRESS DEFLATE
[S] LIST ACTIVE NEWSGROUPS
[S] .
[C] COMPRESS DEFLATE
[S] 206 Compression active
[Henceforth, all traffic is compressed]
[C] CAPABILITIES
[S] 101 Capability list:
[S] VERSION 2
[S] READER
[S] AUTHINFO
[S] LIST ACTIVE NEWSGROUPS
[S] .
[C] AUTHINFO USER fred
[S] 502 DEFLATE compression already active
3. Compression Efficiency
This section is informative, not normative.
NNTP poses some unusual problems for a compression layer.
Upstream traffic is fairly simple. Most NNTP clients send the same
few commands again and again, so any compression algorithm that can
exploit repetition works efficiently. The article posting and
transfer commands (e.g., POST, IHAVE, and TAKETHIS [RFC4644]) are
exceptions; clients that send many article posting or transfer
commands may want to surround large multi-line data blocks with a
dictionary flush and/or, depending on the compression algorithm, a
change of compression level in the same way as is recommended for
servers later in this document (Section 4).
Downstream traffic has the unusual property that several kinds of
data are sent, possibly confusing a dictionary-based compression
algorithm.
NNTP responses that are not related to article header/body retrieval
are one type. Compressing NNTP simple responses (e.g., in answer to
CHECK [RFC4644], DATE, GROUP, LAST, NEXT, STAT, etc.) generally does
not save many bytes, unless repeated several times in the same NNTP
session. On the contrary, most of the NNTP multi-line responses
(e.g., in answer to LIST, LISTGROUP, NEWGROUPS, NEWNEWS, etc.) are
highly compressible; using its least CPU-intensive setting, zlib
compresses typical responses to 25-40% of their original size.
Article headers (as retrieved, for instance, via the HEAD, HDR, OVER,
or ARTICLE commands) are another type. These are equally
compressible, and benefit from using the same dictionary as the NNTP
responses.
A third type is article body text (as retrieved, for instance, via
the BODY or ARTICLE commands). Text is usually fairly short and
includes much ASCII, so the same compression dictionary will do a
good job here, too. When multiple messages in the same thread are
read at the same time, quoted lines, etc., can often be compressed
almost to zero.
Finally, non-text article bodies or attachments (as retrieved, for
instance, via the BODY or ARTICLE commands) are transmitted in
encoded form, usually Base64 [RFC4648], UUencode [IEEE.1003.1-2008],
or yEnc [yEnc].
When such non-text article bodies or attachments are retrieved, a
compression algorithm may be able to compress them, but the format of
their encoding is usually not NNTP-like, so the dictionary built
while compressing NNTP does not help much. The compressor has to
adapt its dictionary from NNTP to the attachment's encoding format,
and then back.
When attachments are retrieved in Base64 or UUencode form, the
Huffman coding usually compresses those to approximately only 75% of
their encoding size. 8-bit compression algorithms such as DEFLATE
work well on 8-bit file formats; however, both Base64 and UUencode
transform a file into something resembling 6-bit bytes, hiding most
of the 8-bit file format from the compressor.
On the other end, attachments encoded using a compression algorithm
that retains the full 8-bit spectrum, like yEnc, are much more likely
to be incompressible.
4. DEFLATE Specificities
When using the zlib library (see [RFC1951]), the functions
deflateInit2(), deflate(), inflateInit2(), and inflate() suffice to
implement this extension.
The windowBits value MUST be in the range -8 to -15 for
deflateInit2(), or else it will use the wrong format. The windowBits
value SHOULD be -15 for inflateInit2(), or else it will not be able
to decompress a stream with a larger window size, thus reducing
interoperability. deflateParams() can be used to improve compression
rate and resource use. Regarding flush operations, the Z_FULL_FLUSH
argument to deflate() permits to clear the dictionary, which
generally results in compression that is less effective than
performing a Z_PARTIAL_FLUSH. As a matter of fact, keeping the 32 KB
dictionary from previous data, no matter how unrelated, can be of
help (if there are no matching strings in there, then it is simply
not referenced).
A server can improve downstream compression and the CPU efficiency of
both the server and the client if it adjusts the compression level
(e.g., using the deflateParams() function in zlib) at the start and
end of large non-text multi-line data blocks (before and after
'content-lines' in the definition of 'multi-line-data-block' in
[RFC3977], Section 9.8). This mechanism prevents the server from
trying to compress incompressible attachments.
A very simple strategy is to change the compression level to 0 at the
start of an incompressible multi-line data block, for instance when
encoded using yEnc [yEnc], and to keep it at 1-5 the rest of the
time. More complex strategies are, of course, possible and
encouraged.
5. Augmented BNF Syntax for the COMPRESS Extension
This section describes the formal syntax of the COMPRESS extension
using ABNF [RFC7405] and [RFC5234]. It extends the syntax in
Section 9 of [RFC3977], and non-terminals not defined in this
document are defined there. The NNTP ABNF [RFC3977] should be
imported first, before attempting to validate these rules.
5.1. Commands
This syntax extends the non-terminal <command>, which represents an
NNTP command.
command =/ compress-command
compress-command = "COMPRESS" WS algorithm
5.2. Capability Entries
This syntax extends the non-terminal <capability-entry>, which
represents a capability that may be advertised by the server.
capability-entry =/ compress-capability
compress-capability = "COMPRESS" 1*(WS algorithm)
5.3. General Non-terminals
algorithm = %s"DEFLATE" / 1*20alg-char ; case-sensitive
alg-char = UPPER / DIGIT / "-" / "_"
6. Summary of Response Codes
This section defines the following new response code. It is not
multi-line and has no arguments.
Response code 206
Generated by: COMPRESS
Meaning: compression layer activated
7. Security Considerations
Security issues are discussed throughout this document.
In general, the security considerations of the NNTP core
specification ([RFC3977], Section 12) and the DEFLATE compressed data
format specification ([RFC1951], Section 6) are applicable here.
Implementers should be aware that combining compression with
encryption like TLS can sometimes reveal information that would not
have been revealed without compression, as explained in Section 6 of
[RFC3749]. As a matter of fact, adversaries that observe the length
of the compressed data might be able to derive information about the
corresponding uncompressed data. The CRIME and the BREACH attacks
([RFC7457], Section 2.6) are examples of such case.
In order to help mitigate leaking authentication credentials, this
document states in Section 2.2.2 that authentication MUST NOT be
attempted after a successful use of COMPRESS. Therefore, when a
client wants to authenticate, compress data, and negotiate a TLS
security layer (without TLS-level compression) in the same NNTP
connection, it MUST use the STARTTLS, AUTHINFO, and COMPRESS commands
in that order. Of course, instead of using the STARTTLS command, a
client can also use implicit TLS, that is to say it begins the TLS
negotiation immediately upon connection on a separate port dedicated
to NNTP over TLS.
NNTP commands other than AUTHINFO are not believed to divulge
confidential information as long as only public Netnews newsgroups
and articles are accessed. That is why this specification only
prohibits the use of AUTHINFO after COMPRESS. In case confidential
articles are accessed in private newsgroups, special care is needed:
implementations SHOULD NOT compress confidential data together with
public data when a TLS [RFC5246] or SASL [RFC4422] security layer is
active. As a matter of fact, adversaries that observe the length of
the compressed data might be able to derive information about it,
when public data (that adversaries know is read) and confidential
data are compressed in the same compression session.
Additionally, it is preferable not to compress the contents of two
distinct confidential articles together if it can be avoided, as
adversaries might be able to derive information about them (for
instance, if they have a few header fields or body lines in common).
This can be achieved, for instance, with DEFLATE by clearing the
compression dictionary each time a confidential article is sent.
More complex implementations are, of course, possible and encouraged.
Implementations are encouraged to unconditionally allow compression
when no security layer is active, and to support an option to enable
or disable compression when a security layer is active. Such an
option could, for instance, have global scope or be server/
connection-based. Besides, as compression may in general weaken the
confidentiality of a security layer, implementations SHOULD NOT
automatically enable compression when a security layer is active
unless the user explicitly enabled it with this knowledge.
Future extensions to NNTP that define commands conveying confidential
data SHOULD be sure to state that these confidential data SHOULD NOT
be compressed together with public data when a security layer is
active.
Last but not least, careful consideration should be given to
protections against implementation errors that introduce security
risks with regards to compression algorithms. See, for instance, the
part of Section 6 of [RFC3749] about compression algorithms that can
occasionally expand, rather than compress, input data.
8. IANA Considerations
8.1. "NNTP Compression Algorithms" Registry
The "NNTP Compression Algorithms" registry is maintained by IANA.
The registry is available at
<http://www.iana.org/assignments/nntp-parameters>.
The purpose of this registry is not only to ensure uniqueness of
values used to name NNTP compression algorithms, but also to provide
a definitive reference to technical specifications detailing each
NNTP compression algorithm available for use on the Internet.
An NNTP compression algorithm is either a private algorithm, or its
name is included in the IANA "NNTP Compression Algorithms" registry
(in which case it is a "registered NNTP compression algorithm").
Different entries in the registry MUST use different names.
Private algorithms with unregistered names are allowed, but SHOULD
NOT be used because it is difficult to achieve interoperability with
them.
The 206, 403, and 502 response codes that a news server answers to
the COMPRESS command using a private compression algorithm MUST have
the same meaning as the one documented in Section 2.2 of this
document.
The procedure detailed in Section 8.1.1 is to be used for
registration of a value naming a specific individual compression
algorithm.
Any name that conforms to the syntax of an NNTP compression algorithm
name (Section 5.3) can be used. Especially, NNTP compression
algorithms are named by strings, from 1 to 20 characters in length,
consisting of uppercase letters, digits, hyphens, and/or underscores.
Comments may be included in the registry as discussed in
Section 8.1.2 and may be changed as discussed in Section 8.1.3.
8.1.1. Algorithm Name Registration Procedure
IANA will register new NNTP compression algorithm names on a First
Come First Served basis, as defined in BCP 26 [RFC5226]. IANA has
the right to reject obviously bogus registration requests, but will
not perform a review of claims made in the registration form.
Registration of an NNTP compression algorithm is requested by filling
in the following template and sending it via electronic mail to IANA
at <iana@iana.org>:
Subject: Registration of NNTP compression algorithm Z
NNTP compression algorithm name:
Security considerations:
Published specification (recommended):
Contact for further information:
Intended usage: (One of COMMON, LIMITED USE, or OBSOLETE)
Owner/Change controller:
Note: (Any other information that the author deems relevant may be
added here.)
While this registration procedure does not require expert review,
authors of NNTP compression algorithms are encouraged to seek
community review and comment whenever that is feasible. Authors may
seek community review by posting a specification of their proposed
algorithm as an Internet-Draft. NNTP compression algorithms intended
for widespread use should be standardized through the normal IETF
process, when appropriate.
8.1.2. Comments on Algorithm Registrations
Comments on a registered NNTP compression algorithm should first be
sent to the "owner" of the algorithm and/or to the mailing list for
the now concluded NNTPEXT working group (<ietf-nntp@lists.eyrie.org>)
of the IETF.
Submitters of comments may, after a reasonable attempt to contact the
owner and/or the above mailing list, request IANA to attach their
comment to the NNTP compression algorithm registration itself by
sending mail to <iana@iana.org>. At IANA's sole discretion, IANA may
attach the comment to the NNTP compression algorithm's registration.
8.1.3. Change Control
Once an NNTP compression algorithm registration has been published by
IANA, the owner may request a change to its definition. The change
request follows the same procedure as the initial registration
request.
The owner of an NNTP compression algorithm may pass responsibility
for the algorithm to another person or agency by informing IANA; this
can be done without discussion or review.
The IESG may reassign responsibility for an NNTP compression
algorithm. The most common case of this will be to enable changes to
be made to algorithms where the owner of the registration has died,
has moved out of contact, or is otherwise unable to make changes that
are important to the community.
NNTP compression algorithm registrations MUST NOT be deleted;
algorithms that are no longer believed appropriate for use can be
declared OBSOLETE by a change to their "intended usage" field; such
algorithms will be clearly marked in the registry published by IANA.
The IESG is considered to be the owner of all NNTP compression
algorithms that are on the IETF Standards Track.
8.2. Registration of the DEFLATE Compression Algorithm
This section gives a formal definition of the DEFLATE compression
algorithm as required by Section 8.1.1 for the IANA registry.
NNTP compression algorithm name: DEFLATE
Security considerations: See Section 7 of this document
Published specification: This document
Contact for further information: Authors of this document
Intended usage: COMMON
Owner/Change controller: IESG <iesg@ietf.org>
Note: This algorithm is mandatory to implement
This registration appears as follows in the "NNTP Compression
Algorithms" registry:
+------------+------------+--------------+--------------+-----------+
| Algorithm | Intended | Comment | Change | Reference |
| Name | Usage | | Controller | |
+------------+------------+--------------+--------------+-----------+
| DEFLATE | COMMON | Mandatory to | IESG | RFC 8054 |
| | | implement | | |
+------------+------------+--------------+--------------+-----------+
8.3. Registration of the NNTP COMPRESS Extension
This section gives a formal definition of the COMPRESS extension as
required by Section 3.3.3 of [RFC3977] for the IANA registry.
o The COMPRESS extension allows an NNTP connection to be effectively
and efficiently compressed.
o The capability label for this extension is "COMPRESS", whose
arguments list the available compression algorithms.
o This extension defines one new command, COMPRESS, whose behavior,
arguments, and responses are defined in Section 2.2.
o This extension does not associate any new responses with
pre-existing NNTP commands.
o This extension does affect the overall behavior of both server and
client, in that after successful use of the COMPRESS command, all
communication is transmitted in a compressed format.
o This extension does not affect the maximum length of commands or
initial response lines.
o This extension does not alter pipelining, but the COMPRESS command
cannot be pipelined.
o Use of this extension does alter the capabilities list; once the
COMPRESS command has been used successfully, the COMPRESS
capability can no longer be advertised by CAPABILITIES.
Additionally, the STARTTLS and MODE-READER capabilities MUST NOT
be advertised, and the AUTHINFO capability label MUST either be
listed with no arguments or not advertised at all after a
successful execution of the COMPRESS command.
o This extension does not cause any pre-existing command to produce
a 401, 480, or 483 response code.
o This extension is unaffected by any use of the MODE READER
command; however, the MODE READER command MUST NOT be used in the
same session following a successful execution of the COMPRESS
command.
o The STARTTLS and AUTHINFO commands MUST NOT be used in the same
session following a successful execution of the COMPRESS command.
o Published Specification: This document.
o Contact for Further Information: Authors of this document.
o Change Controller: IESG <iesg@ietf.org>
This registration will appear as follows in the "NNTP Capability
Labels" registry contained in the "Network News Transfer Protocol
(NNTP) Parameters" registry:
+----------+----------------------------------+-----------+
| Label | Meaning | Reference |
+----------+----------------------------------+-----------+
| COMPRESS | Supported compression algorithms | RFC 8054 |
+----------+----------------------------------+-----------+
9. References
9.1. Normative References
[RFC1951] Deutsch, P., "DEFLATE Compressed Data Format Specification
version 1.3", RFC 1951, DOI 10.17487/RFC1951, May 1996,
<http://www.rfc-editor.org/info/rfc1951>.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<http://www.rfc-editor.org/info/rfc2119>.
[RFC3977] Feather, C., "Network News Transfer Protocol (NNTP)",
RFC 3977, DOI 10.17487/RFC3977, October 2006,
<http://www.rfc-editor.org/info/rfc3977>.
[RFC5226] Narten, T. and H. Alvestrand, "Guidelines for Writing an
IANA Considerations Section in RFCs", BCP 26, RFC 5226,
DOI 10.17487/RFC5226, May 2008,
<http://www.rfc-editor.org/info/rfc5226>.
[RFC5234] Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax
Specifications: ABNF", STD 68, RFC 5234,
DOI 10.17487/RFC5234, January 2008,
<http://www.rfc-editor.org/info/rfc5234>.
[RFC7405] Kyzivat, P., "Case-Sensitive String Support in ABNF",
RFC 7405, DOI 10.17487/RFC7405, December 2014,
<http://www.rfc-editor.org/info/rfc7405>.
9.2. Informative References
[CRIME] Rizzo, J. and T. Duong, "The CRIME Attack", Ekoparty
Security Conference, 2012.
[IEEE.1003.1-2008]
IEEE, "Information Technology - Portable Operating System
Interface (POSIX(R))", IEEE Standard 1003.1-2008,
DOI 10.1109/IEEESTD.2016.7582338, 2008,
<https://standards.ieee.org/findstds/
standard/1003.1-2008.html>.
[MNP] Held, G., "The Complete Modem Reference", Second
Edition, John Wiley & Sons, Inc., May 1994.
[RFC1962] Rand, D., "The PPP Compression Control Protocol (CCP)",
RFC 1962, DOI 10.17487/RFC1962, June 1996,
<http://www.rfc-editor.org/info/rfc1962>.
[RFC3749] Hollenbeck, S., "Transport Layer Security Protocol
Compression Methods", RFC 3749, DOI 10.17487/RFC3749, May
2004, <http://www.rfc-editor.org/info/rfc3749>.
[RFC4422] Melnikov, A., Ed. and K. Zeilenga, Ed., "Simple
Authentication and Security Layer (SASL)", RFC 4422,
DOI 10.17487/RFC4422, June 2006,
<http://www.rfc-editor.org/info/rfc4422>.
[RFC4642] Murchison, K., Vinocur, J., and C. Newman, "Using
Transport Layer Security (TLS) with Network News Transfer
Protocol (NNTP)", RFC 4642, DOI 10.17487/RFC4642, October
2006, <http://www.rfc-editor.org/info/rfc4642>.
[RFC4643] Vinocur, J. and K. Murchison, "Network News Transfer
Protocol (NNTP) Extension for Authentication", RFC 4643,
DOI 10.17487/RFC4643, October 2006,
<http://www.rfc-editor.org/info/rfc4643>.
[RFC4644] Vinocur, J. and K. Murchison, "Network News Transfer
Protocol (NNTP) Extension for Streaming Feeds", RFC 4644,
DOI 10.17487/RFC4644, October 2006,
<http://www.rfc-editor.org/info/rfc4644>.
[RFC4648] Josefsson, S., "The Base16, Base32, and Base64 Data
Encodings", RFC 4648, DOI 10.17487/RFC4648, October 2006,
<http://www.rfc-editor.org/info/rfc4648>.
[RFC4978] Gulbrandsen, A., "The IMAP COMPRESS Extension", RFC 4978,
DOI 10.17487/RFC4978, August 2007,
<http://www.rfc-editor.org/info/rfc4978>.
[RFC5246] Dierks, T. and E. Rescorla, "The Transport Layer Security
(TLS) Protocol Version 1.2", RFC 5246,
DOI 10.17487/RFC5246, August 2008,
<http://www.rfc-editor.org/info/rfc5246>.
[RFC7457] Sheffer, Y., Holz, R., and P. Saint-Andre, "Summarizing
Known Attacks on Transport Layer Security (TLS) and
Datagram TLS (DTLS)", RFC 7457, DOI 10.17487/RFC7457,
February 2015, <http://www.rfc-editor.org/info/rfc7457>.
[RFC7525] Sheffer, Y., Holz, R., and P. Saint-Andre,
"Recommendations for Secure Use of Transport Layer
Security (TLS) and Datagram Transport Layer Security
(DTLS)", BCP 195, RFC 7525, DOI 10.17487/RFC7525, May
2015, <http://www.rfc-editor.org/info/rfc7525>.
[V42bis] International Telecommunications Union, "Data compression
procedures for data circuit-terminating equipment (DCE)
using error correction procedures", ITU-T
Recommendation V.42bis, January 1990,
<http://www.itu.int/rec/T-REC-V.42bis>.
[yEnc] Helbing, J., "yEnc - Efficient encoding for Usenet and
eMail", March 2002, <http://www.yenc.org/>.
Acknowledgments
This document draws heavily on ideas in [RFC4978] by Arnt
Gulbrandsen; a large portion of this text was borrowed from that
specification.
The authors would like to thank the following individuals for
contributing their ideas and reviewing this specification: Mark
Adler, Russ Allbery, Stephane Bortzmeyer, Francis Dupont, Angel
Gonzalez, Barry Leiba, John Levine, and Brian Peterson.
Special thanks to our Document Shepherd, Michael Baeuerle, who
significantly helped to increase the quality of this specification,
and to Stephen Farrell for his encouragement to pursue the efforts in
standardizing this NNTP extension.
Many thanks to the Responsible Area Director, Alexey Melnikov, for
reviewing and sponsoring this document.
Authors' Addresses
Kenneth Murchison
Carnegie Mellon University
5000 Forbes Avenue
Pittsburgh, PA 15213
United States of America
Phone: +1 412 268 1982
Email: murch@andrew.cmu.edu
Julien Elie
10 allee Clovis
Noisy-le-Grand 93160
France
Email: julien@trigofacile.com
URI: http://www.trigofacile.com/