| Rfc | 7071 |
|---|
| Title | A Media Type for Reputation Interchange |
|---|
| Author | N. Borenstein, M.
Kucherawy |
|---|
| Date | November 2013 |
|---|
| Format: | TXT, HTML |
|---|
| Status: | PROPOSED
STANDARD |
|---|
|
Internet Engineering Task Force (IETF) N. Borenstein
Request for Comments: 7071 Mimecast
Category: Standards Track M. Kucherawy
ISSN: 2070-1721 November 2013
A Media Type for Reputation Interchange
Abstract
This document defines the format of reputation response data
("reputons"), the media type for packaging it, and definition of a
registry for the names of reputation applications and response sets.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 5741.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
http://www.rfc-editor.org/info/rfc7071.
Copyright Notice
Copyright (c) 2013 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction ....................................................2
2. Terminology and Definitions .....................................3
2.1. Reputon ....................................................3
2.2. Key Words ..................................................3
2.3. Other Definitions ..........................................3
3. Description .....................................................3
3.1. Reputon Attributes .........................................4
4. Ratings .........................................................5
5. Caching .........................................................5
6. Reputons ........................................................6
6.1. Syntax .....................................................6
6.2. Formal Definition ..........................................6
6.2.1. Imported JSON Terms .................................6
6.2.2. Reputon Structure ...................................7
6.3. Examples ...................................................9
7. IANA Considerations ............................................11
7.1. application/reputon+json Media Type Registration ..........11
7.2. Reputation Applications Registry ..........................13
8. Security Considerations ........................................15
9. References .....................................................15
9.1. Normative References ......................................15
9.2. Informative References ....................................15
Appendix A. Acknowledgments .......................................16
1. Introduction
This document defines a data object for use when answering a
reputation query. It also defines a media type to carry the response
set data when using a transport method that follows the media type
framework, such as the query method based on the HyperText Transfer
Protocol (HTTP) defined in [RFC7072]. Any future query methods that
might be developed are expected to use the same data object.
Also included is the specification for an IANA registry to contain
definitions and symbolic names for known reputation applications and
corresponding response sets.
2. Terminology and Definitions
This section defines terms used in the rest of the document.
2.1. Reputon
A "reputon" is a single independent object containing reputation
information. A particular query about a subject of interest will
receive one or more reputons in response, depending on the nature of
the data collected and reported by the server.
2.2. Key Words
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [KEYWORDS].
2.3. Other Definitions
Other terms of importance in this document are defined in [RFC7070],
the base document in this document series.
3. Description
The meta-format selected for the representation of a reputon is
JavaScript Object Notation (JSON), defined in [JSON]. Accordingly, a
new media type, "application/reputon+json", is defined for the JSON
representation of reputational data, typically in response to a
client making a request for such data about some subject. This media
type takes no parameters.
The body of the media type consists of a JSON document that contains
the reputation information requested. A detailed description of the
expected structure of the reply is provided below.
The media type comprises a single member indicating the name of the
application context (see Section 5.1 of [RFC7070]) in which the
reputational data are being returned. The application name refers to
a registration as described in Section 7.2, which defines the valid
assertions and any extensions that might also be valid (i.e., the
response set) for that application.
3.1. Reputon Attributes
The key pieces of data found in a reputon for all reputation
applications are defined as follows:
rater: The identity of the entity aggregating, computing, and
providing the reputation information, typically expressed as a DNS
domain name.
assertion: A key word indicating the specific assertion or claim
being rated.
rated: The identity of the entity being rated. The nature of this
field is application specific; it could be domain names, email
addresses, driver's license numbers, or anything that uniquely
identifies the entity being rated. Documents that define specific
reputation applications are required to define syntax and
semantics for this field.
rating: The overall rating score for that entity, expressed as a
floating-point number between 0.0 and 1.0 inclusive. See
Section 4 for discussion.
The following are OPTIONAL for all applications, to be used in
contexts where they are appropriate:
confidence: the level of certainty the reputation provider has that
the value presented is appropriate, expressed as a floating-point
number between 0.0 and 1.0 inclusive.
normal-rating: An indication of what the reputation provider would
normally expect as a rating for the subject. This allows the
client to note that the current rating is or is not in line with
expectations.
sample-size: The number of data points used to compute the rating,
possibly an approximation. Expressed as an unsigned 64-bit
integer. Consumers can assume that the count refers to distinct
data points rather than a count of aggregations (for example,
individual votes rather than aggregated vote counts) unless it is
specified out-of-band that some other interpretation is more
appropriate. The units are deliberately not normatively
specified, since not all reputation service providers will collect
data the same way.
generated: A timestamp indicating when this value was generated.
Expressed as the number of seconds since January 1, 1970 00:00
UTC.
expires: A timestamp indicating a time beyond which the score
reported is likely not to be valid. Expressed as the number of
seconds since January 1, 1970 00:00 UTC. See Section 5 for
discussion.
A particular application that registers itself with IANA (per
Section 7.2, below) can define additional application-specific
attribute/value pairs beyond these standard ones.
An application service provider might operate with an enhanced form
of common services, which might in turn prompt development and
reporting of specialized reputation information. The details of the
enhancements and specialized information are beyond the scope of this
document, except that the underlying JSON syntax is extensible for
encoding such provider-specific information.
4. Ratings
The score presented as the value in the rating attribute appears as a
floating-point value between 0.0 and 1.0 inclusive. The intent is
that the definition of an assertion within an application will
declare what the anchor values 0.0 and 1.0 specifically mean.
Generally speaking, 1.0 implies full agreement with the assertion,
while 0.0 indicates no support for the assertion.
The definition will also specify the type of scale in use when
generating scores, to which all reputation service providers for that
application space must adhere. Further discussion can be found in
[RFC7070].
5. Caching
A reputon can contain an "expires" field indicating a timestamp after
which the client SHOULD NOT use the rating it contains and SHOULD
issue a new query.
This specification does not mandate any caching of ratings on the
part of the client, but there are obvious operational benefits to
doing so. In the context of reputation, a cached (and hence, stale)
rating can cause desirable traffic to be identified as undesirable,
or vice versa.
Reputation data is typically most volatile when the subject of the
reputation is young. Accordingly, if a service chooses to include
expiration timestamps as part a reply, these values SHOULD be lower
for subjects about which little data has been collected.
6. Reputons
6.1. Syntax
A reputon expressed in JSON is a set of key-value pairs, where the
keys are the names of particular attributes that comprise a reputon
(as listed above, or as provided with specific applications), and
values are the content associated with those keys. The set of keys
that make up a reputon within a given application are known as that
application's "response set".
A reputon object typically contains a reply corresponding to the
assertion for which a client made a specific request. For example, a
client asking for assertion "sends-spam" about domain "example.com"
would expect a reply consisting of a reputon making a "sends-spam"
assertion about "example.com" and nothing more. If a client makes a
request about a subject but does not specify an assertion of
interest, the server can return reputons about any assertion for
which it has data; in effect, the client has asked for any available
information about the subject. A client that receives an irrelevant
reputon simply ignores it.
An empty reputon is an acknowledgment by the server that the request
has been received, and serves as a positive indication that the
server does not have the information requested. This is semantically
equivalent to returning a reputon with a "sample-size" of zero.
6.2. Formal Definition
[JSON] defines the structure of JSON objects and arrays using a set
of primitive elements. Those elements will be used to describe the
JSON structure of a reputation object.
6.2.1. Imported JSON Terms
OBJECT: a JSON object, defined in Section 2.2 of [JSON]
MEMBER: a member of a JSON object, defined in Section 2.2 of [JSON]
MEMBER-NAME: the name of a MEMBER, defined as a "string" in
Section 2.2 of [JSON]
MEMBER-VALUE: the value of a MEMBER, defined as a "value" in
Section 2.2 of [JSON]
ARRAY: an array, defined in Section 2.3 of [JSON]
ARRAY-VALUE: an element of an ARRAY, defined in Section 2.3 of
[JSON]
NUMBER: a "number" as defined in Section 2.4 of [JSON]
INTEGER: an "integer" as defined in Section 2.4 of [JSON]
STRING: a "string" as defined in Section 2.5 of [JSON]
6.2.2. Reputon Structure
Using the above terms for the JSON structures, the syntax of a
reputation object is defined as follows:
reputation-object: an OBJECT containing a MEMBER reputation-context
and a MEMBER reputon-list
reputation-context: a MEMBER with MEMBER-NAME "application" and
MEMBER-VALUE a STRING (see Section 3)
reputon-list: a MEMBER with MEMBER-NAME "reputons" and MEMBER-VALUE
a reputon-array
reputon-array: an ARRAY, where each ARRAY-VALUE is a reputon
reputon: an OBJECT, where each MEMBER is a reputon-element
reputon-element: one of the following, defined below: rater-value,
assertion-value, rated-value, rating-value, conf-value, normal-
value, sample-value, gen-value, expire-value, ext-value; note the
following:
* The order of reputon-element members is not significant.
* A specific reputon-element MUST NOT appear more than once.
* rater-value, assertion-value, rated-value, and rating-value are
REQUIRED.
rater-value: a MEMBER with MEMBER-NAME "rater" and MEMBER-VALUE a
STRING (see "rater" in Section 3.1)
assertion-value: a MEMBER with MEMBER-NAME "assertion" and MEMBER-
VALUE a STRING (see "assertion" in Section 3.1)
rated-value: a MEMBER with MEMBER-NAME "rated" and MEMBER-VALUE a
STRING (see "rated" in Section 3.1)
rating-value: a MEMBER with MEMBER-NAME "rating" and MEMBER-VALUE a
NUMBER between 0.0 and 1.0 inclusive (see "rating" in
Section 3.1); the number SHOULD NOT not have more than three
decimal places of precision
conf-value: a MEMBER with MEMBER-NAME "confidence" and MEMBER-VALUE
a NUMBER between 0.0 and 1.0 inclusive (see "confidence" in
Section 3.1); the number SHOULD NOT not have more than three
decimal places of precision
normal-value: a MEMBER with MEMBER-NAME "normal-rating" and MEMBER-
VALUE a NUMBER between 0.0 and 1.0 inclusive (see "normal" in
Section 3.1); the number SHOULD NOT not have more than three
decimal places of precision
sample-value: a MEMBER with MEMBER-NAME "sample-size" and MEMBER-
VALUE a non-negative INTEGER (see "sample-size" in "normal" in
Section 3.1)
gen-value: a MEMBER with MEMBER-NAME "generated" and MEMBER-VALUE a
non-negative INTEGER (see "generated" in Section 3.1)
expire-value: a MEMBER with MEMBER-NAME "expires" and MEMBER-VALUE a
non-negative INTEGER (see "expires" in Section 3.1)
ext-value: a MEMBER, for extension purposes; MEMBER-NAME and MEMBER-
VALUE will be defined in separate application registrations
6.3. Examples
The following simple example:
Content-Type: application/reputon+json
{
"application": "baseball",
"reputons": [
{
"rater": "RatingsRUs.example.com",
"assertion": "is-good",
"rated": "Alex Rodriguez",
"rating": 0.99,
"sample-size": 50000
}
]
}
...indicates to the client that "RatingsRUs.example.com" consolidated
50000 data points (perhaps from everyone in Yankee Stadium) and
concluded that Alex Rodriguez is very, very good (0.99) at something.
It doesn't tell us what he's good at, and while it might be playing
baseball, it could just as well be paying his taxes on time.
A more sophisticated usage would define a baseball application with a
response set of specific assertions, so that this example:
Content-Type: application/reputon+json
{
"application": "baseball",
"reputons:" [
{
"rater": "baseball-reference.example.com",
"assertion": "hits-for-power",
"rated": "Alex Rodriguez",
"rating": 0.99,
"sample-size": 50000
}
]
}
...would indicate that 50000 fans polled by the entity baseball-
reference.example.com rate Alex Rodriguez very highly in hitting for
power, whereas this example:
Content-Type: application/reputon+json
{
"application": "baseball",
"reputons": [
{
"rater": "baseball-reference.example.com",
"assertion": "strong-hitter",
"rated": "Alex Rodriguez",
"rating": 0.4,
"confidence": 0.2,
"sample-size": 50000
}
]
}
...would indicate that a similar poll indicated a somewhat weak
consensus that Alex Rodriguez tends to fail in critical batting
situations during baseball games.
The following is an example reputon generated using this schema,
including the media type definition line that identifies a specific
reputation application context. Here, reputation agent
"rep.example.net" is asserting within the context of the "email-id"
application (see [RFC7073]) that "example.com" appears to be
associated with spam 1.2% of the time, based on just short of 17
million messages analyzed or reported to date. The "email-id"
application has declared the extension key "email-id-identity" to
indicate how the subject identifier was used in the observed data,
establishing some more-specific semantics for the "rating" value. In
this case, the extension is used to show the identity "example.com",
the subject of the query, is extracted from the analyzed messages
using the DomainKeys Identified Mail [DKIM] "d=" parameter for
messages where signatures validate. The reputation agent is 95%
confident of this result. A second reputon is also present
indicating similar information for the same domain as it is used in
the context of Sender Policy Framework [SPF] evaluations. (See
[RFC7073] for details about the registered email identifiers
application.)
Content-Type: application/reputon+json
{
"application": "email-id",
"reputons": [
{
"rater": "rep.example.net",
"assertion": "spam",
"identity": "dkim",
"rated": "example.com",
"confidence": 0.95,
"rating": 0.012,
"sample-size": 16938213,
"updated": 1317795852
},
{
"rater": "rep.example.net",
"assertion": "spam",
"identity": "spf",
"rated": "example.com",
"confidence": 0.98,
"rating": 0.023,
"sample-size": 16938213,
"updated": 1317795852
}
]
}
7. IANA Considerations
This document presents two actions for IANA -- namely, the creation
of the new media type "application/reputon+json" and the creation of
a registry for reputation application types. Another document in
this series creates an initial registry entry for the latter.
7.1. application/reputon+json Media Type Registration
This section provides the media type registration application from
[MIME-REG] for processing by IANA.
To: media-types@iana.org
Subject: Registration of media type application/reputon+json
Type name: application
Subtype name: reputon+json
Required parameters: none
Optional parameters: none
Encoding considerations: "7bit" encoding is sufficient and is used
to maintain readability when viewed by non-MIME mail readers.
Security considerations: See Section 8 of [RFC7071].
Interoperability considerations: Implementers may encounter "app"
values, attribute/value pairs, or response set items that they do
not support, which are to be ignored.
Published specification: [RFC7071]
Applications that use this media type: Any application that wishes
to query a service that provides reputation data using the form
defined in [RFC7072]. The example application is one that
provides reputation data about DNS domain names and other
identifiers found in email messages.
Fragment identifier considerations: N/A
Additional information: The value of the "app" parameter is
registered with IANA.
Deprecated alias names for this type: N/A
Magic number(s): N/A
File extension(s): N/A
Macintosh file type code(s): N/A
Person and email address to contact for further information:
Murray S. Kucherawy <superuser@gmail.com>
Intended usage: COMMON
Restrictions on usage: N/A
Author:
Nathaniel Borenstein
Murray S. Kucherawy
Change controller: IESG
Provisional registration?: no
7.2. Reputation Applications Registry
IANA has created the "Reputation Applications" registry. This
registry contains names of applications used with the
application/reputon+json media type (and other media types that carry
reputons), as defined by this document.
New registrations or updates are published in accordance with either
the "IETF Review" or "Specification Required" guidelines as described
in [IANA-CONSIDERATIONS].
New registrations and updates are to contain the following
information:
1. Symbolic name of the application being registered or updated.
Valid names conform to the ABNF construction "token" as defined
in Multipurpose Internet Mail Extensions (MIME) Part One [MIME]
2. Short description of the application (i.e., the class of entity
about which it reports reputation data)
3. The document in which the application is defined
4. New or updated status, which is to be one of:
current: The application is in current use
deprecated: The application is in current use but its use is
discouraged
historic: The application is no longer in current use
A specification for an application space needs to be specific and
clear enough to allow interoperability, and include at least the
following details:
o The application's symbolic name, as it appears in the registration
(see above)
o A description of the subject of a query within this reputation,
and a legal syntax for the same
o An optional table of query parameters that are specific to this
application; each table entry must include:
Name: Name of the query parameter
Status: (as above)
Description: A short description of the purpose of this parameter
Syntax: A reference to a description of valid syntax for the
parameter's value
Required: "yes" if the parameter is mandatory; "no" otherwise
o A list of one or more assertions registered within this
application; each table entry is to include:
Name: Name of the assertion
Description: A short description of the assertion, with specific
meanings for values of 0.0 and 1.0
Scale: A short description of the scale used in computing the
value (see Section 4 of this document)
o An optional list of one or more response set extension keys for
use within this application; each table entry is to include:
Name: Name of the extension key
Description: A short description of the key's intended meaning
Syntax: A description of valid values that can appear associated
with the key
The names of attributes registered should be prefixed by the name of
the application itself (e.g., the "foo" application registering a
"bar" attribute should call it "foo-bar") to avoid namespace
collisions.
For registrations qualifying under "Specification Required" rules,
the Designated Expert [IANA-CONSIDERATIONS] should confirm the
document meets the minima described above and otherwise looks
generally acceptable, and then approve the registration.
8. Security Considerations
This document is primarily an IANA action registering a media type.
It does not describe a new protocol that might introduce security
considerations.
Discussion of the security and operational impacts of using
reputation services in general can be found throughout
[CONSIDERATIONS].
9. References
9.1. Normative References
[JSON] Crockford, D., "The application/json Media Type for
JavaScript Object Notation (JSON)", RFC 4627, July 2006.
[KEYWORDS] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC7070] Borenstein, N., Kucherawy, M., and A. Sullivan, "An
Architecture for Reputation Reporting", RFC 7070, November
2013.
[RFC7072] Borenstein, N. and M. Kucherawy, "A Reputation Query
Protocol", RFC 7072, November 2013.
9.2. Informative References
[CONSIDERATIONS]
Kucherawy, M., "Operational Considerations Regarding
Reputation Services", Work in Progress, May 2013.
[DKIM] Crocker, D., Ed., Hansen, T., Ed., and M. Kucherawy, Ed.,
"DomainKeys Identified Mail (DKIM) Signatures", STD 76,
RFC 6376, September 2011.
[IANA-CONSIDERATIONS]
Narten, T. and H. Alvestrand, "Guidelines for Writing an
IANA Considerations Section in RFCs", BCP 26, RFC 5226,
May 2008.
[MIME-REG] Freed, N., Klensin, J., and T. Hansen, "Media Type
Specifications and Registration Procedures", BCP 13, RFC
6838, January 2013.
[MIME] Freed, N. and N. Borenstein, "Multipurpose Internet Mail
Extensions (MIME) Part One: Format of Internet Message
Bodies", RFC 2045, November 1996.
[RFC7073] Borenstein, N. and M. Kucherawy, "A Reputation Response
Set for Email Identifiers", RFC 7073, November 2013.
[SPF] Wong, M. and W. Schlitt, "Sender Policy Framework (SPF)
for Authorizing Use of Domains in E-Mail, Version 1", RFC
4408, April 2006.
Appendix A. Acknowledgments
The authors wish to acknowledge the contributions of the following to
this specification: Frank Ellermann, Tony Hansen, Jeff Hodges, Simon
Hunt, John Levine, David F. Skoll, and Mykyta Yevstifeyev.
Authors' Addresses
Nathaniel Borenstein
Mimecast
203 Crescent St., Suite 303
Waltham, MA 02453
USA
Phone: +1 781 996 5340
EMail: nsb@guppylake.com
Murray S. Kucherawy
270 Upland Drive
San Francisco, CA 94127
USA
EMail: superuser@gmail.com