| Rfc | 6503 |
|---|
| Title | Centralized Conferencing Manipulation Protocol |
|---|
| Author | M. Barnes, C.
Boulton, S. Romano, H. Schulzrinne |
|---|
| Date | March 2012 |
|---|
| Format: | TXT, HTML |
|---|
| Status: | PROPOSED STANDARD |
|---|
|
Internet Engineering Task Force (IETF) M. Barnes
Request for Comments: 6503 Polycom
Category: Standards Track C. Boulton
ISSN: 2070-1721 NS-Technologies
S. Romano
University of Napoli
H. Schulzrinne
Columbia University
March 2012
Centralized Conferencing Manipulation Protocol
Abstract
The Centralized Conferencing Manipulation Protocol (CCMP) allows a
Centralized Conferencing (XCON) system client to create, retrieve,
change, and delete objects that describe a centralized conference.
CCMP is a means to control basic and advanced conference features
such as conference state and capabilities, participants, relative
roles, and details. CCMP is a stateless, XML-based, client server
protocol that carries, in its request and response messages,
conference information in the form of XML documents and fragments
conforming to the centralized conferencing data model schema.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 5741.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
http://www.rfc-editor.org/info/rfc6503.
Copyright Notice
Copyright (c) 2012 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction ....................................................4
2. Conventions and Terminology .....................................5
3. XCON Conference Control System Architecture .....................5
3.1. Conference Objects .........................................7
3.2. Conference Users ...........................................7
4. Protocol Overview ...............................................8
4.1. Protocol Operations ........................................9
4.2. Data Management ...........................................10
4.3. Data Model Compliance .....................................11
4.4. Implementation Approach ...................................12
5. CCMP Messages ..................................................13
5.1. CCMP Request Message Type .................................13
5.2. CCMP Response Message Type ................................15
5.3. Detailed Messages .........................................17
5.3.1. blueprintsRequest and blueprintsResponse ...........20
5.3.2. confsRequest and confsResponse .....................22
5.3.3. blueprintRequest and blueprintResponse .............24
5.3.4. confRequest and confResponse .......................26
5.3.5. usersRequest and usersResponse .....................30
5.3.6. userRequest and userResponse .......................32
5.3.7. sidebarsByValRequest and sidebarsByValResponse .....37
5.3.8. sidebarByValRequest and sidebarByValResponse .......39
5.3.9. sidebarsByRefRequest and sidebarsByRefResponse .....42
5.3.10. sidebarByRefRequest and sidebarByRefResponse ......44
5.3.11. extendedRequest and extendedResponse ..............47
5.3.12. optionsRequest and optionsResponse ................49
5.4. CCMP Response Codes .......................................53
6. A Complete Example of CCMP in Action ...........................57
6.1. Alice Retrieves the Available Blueprints ..................58
6.2. Alice Gets Detailed Information about a Specific
Blueprint .................................................60
6.3. Alice Creates a New Conference through a Cloning
Operation .................................................62
6.4. Alice Updates Conference Information ......................65
6.5. Alice Inserts a List of Users into the Conference Object ..66
6.6. Alice Joins the Conference ................................68
6.7. Alice Adds a New User to the Conference ...................70
6.8. Alice Asks for the CCMP Server Capabilities ...............72
6.9. Alice Makes Use of a CCMP Server Extension ................75
7. Locating a Conference Server ...................................78
8. Managing Notifications .........................................79
9. HTTP Transport .................................................80
10. Security Considerations .......................................82
10.1. Assuring That the Proper Conference Server Has
Been Contacted ...........................................83
10.2. User Authentication and Authorization ....................84
10.3. Security and Privacy of Identity .........................85
10.4. Mitigating DoS Attacks ...................................86
11. XML Schema ....................................................87
12. IANA Considerations ..........................................105
12.1. URN Sub-Namespace Registration ..........................105
12.2. XML Schema Registration .................................106
12.3. MIME Media Type Registration for
'application/ccmp+xml' ..................................106
12.4. DNS Registrations .......................................107
12.4.1. Registration of a Conference Server
Application Service Tag ..........................108
12.4.2. Registration of a Conference Server
Application Protocol Tag for CCMP ................108
12.5. CCMP Protocol Registry ..................................108
12.5.1. CCMP Message Types ...............................109
12.5.2. CCMP Response Codes ..............................111
13. Acknowledgments ..............................................113
14. References ...................................................113
14.1. Normative References ....................................113
14.2. Informative References ..................................114
Appendix A. Evaluation of Other Protocol Models and
Transports Considered for CCMP ......................116
A.1. Using SOAP for CCMP ......................................117
A.2. A RESTful Approach for CCMP ..............................117
1. Introduction
"A Framework for Centralized Conferencing" [RFC5239] (XCON framework)
defines a signaling-agnostic framework, naming conventions, and
logical entities required for building advanced conferencing systems.
The XCON framework introduces the conference object as a logical
representation of a conference instance, representing the current
state and capabilities of a conference.
The Centralized Conferencing Manipulation Protocol (CCMP) defined in
this document allows authenticated and authorized users to create,
manipulate, and delete conference objects. Operations on conferences
include adding and removing participants, changing their roles, as
well as adding and removing media streams and associated endpoints.
CCMP implements the client-server model within the XCON framework,
with the conferencing client and conference server acting as client
and server, respectively. CCMP uses HTTP [RFC2616] as the protocol
to transfer requests and responses, which contain the domain-specific
XML-encoded data objects defined in [RFC6501] "Conference Information
Data Model for Centralized Conferencing (XCON)".
Section 2 clarifies the conventions and terminology used in the
document. Section 3 provides an overview of the conference control
functionality of the XCON framework, together with a description of
the main targets CCMP deals with, namely conference objects and
conference users. A general description of the operations associated
with protocol messages is given in Section 4 together with
implementation details. Section 5 delves into the details of
specific CCMP messages. A complete, non-normative, example of the
operation of CCMP, describing a typical call flow associated with
conference creation and manipulation, is provided in Section 6. A
survey of the methods that can be used to locate a conference server
is provided in Section 7, and Section 8 discusses potential
approaches to notifications management. CCMP transport over HTTP is
highlighted in Section 9. Security considerations are presented in
Section 10. Finally, Section 11 provides the XML schema.
2. Conventions and Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in
[RFC2119].
In addition to the terms defined in "A Framework for Centralized
Conferencing" [RFC5239], this document uses the following terms and
acronyms:
XCON-aware client: An XCON conferencing system client that is able
to issue CCMP requests.
First-Party Request: A request issued by the client to manipulate
its own conferencing data.
Third-Party Request: A request issued by a client to manipulate the
conference data of another client.
3. XCON Conference Control System Architecture
CCMP supports the XCON framework. Figure 1 depicts a subset of the
"Conferencing System Logical Decomposition" architecture from the
XCON framework document. It illustrates the role that CCMP assumes
within the overall centralized architecture.
........................................................
. Conferencing System .
. .
. +---------------------------------------+ .
. | C O N F E R E N C E O B J E C T | .
. +-+-------------------------------------+ | .
. | C O N F E R E N C E O B J E C T | | .
. +-+-------------------------------------+ | | .
. | C O N F E R E N C E O B J E C T | | | .
. | | |-+ .
. | |-+ .
. +---------------------------------------+ .
. ^ .
. | .
. v .
. +-------------------+ .
. | Conference Control| .
. | Server | .
. +-------------------+ .
. ^ .
.........................|..............................
|
|Centralized
|Conferencing
|Manipulation
|Protocol
|
.........................|..............................
. V .
. +----------------+ .
. | Conference | .
. | Control | .
. | Client | .
. +----------------+ .
. .
. Conferencing Client .
........................................................
Figure 1: Conferencing Client Interaction
The Centralized Conferencing Manipulation Protocol (CCMP) allows the
conference control client (conferencing client) to interface with the
conference object maintained by the conferencing system, as depicted
in Figure 1. Note that additional functionality of the conferencing
client and conferencing system is discussed in the XCON framework and
related documents.
This section provides details of the identifiers REQUIRED to address
and manage the clients associated with a conferencing system using
CCMP.
3.1. Conference Objects
Conference objects feature a simple dynamic inheritance-and-override
mechanism. Conference objects are linked into a tree known as a
"cloning tree" (see Section 7.1 of [RFC5239]). Each cloning tree
node inherits attributes from its parent node. The roots of these
inheritance trees are conference templates also known as
"blueprints". Nodes in the inheritance tree can be active
conferences or simply descriptions that do not currently have any
resources associated with them (i.e., conference reservations). An
object can mark certain of its properties as unalterable, so that
they cannot be overridden. Per the framework, a client may specify a
parent object (a conference or blueprint) from which to inherit
values when a conference is created using the conference control
protocol.
Conference objects are uniquely identified by the XCON-URI within the
scope of the conferencing system. The XCON-URI is introduced in the
XCON framework and defined in the XCON common data model.
Conference objects are comprehensively represented through XML
documents compliant with the XML schema defined in the XCON data
model [RFC6501]. The root element of such documents, called
<conference-info>, is of type "conference-type". It encompasses
other XML elements describing different conference features and users
as well. Using CCMP, conferencing clients can use these XML
structures to express their preferences in creating or updating a
conference. A conference server can convey conference information
back to the clients using the XML elements.
3.2. Conference Users
Each conference can have zero or more users. All conference
participants are users, but some users may have only administrative
functions and do not contribute or receive media. Users are added
one user at a time to simplify error reporting. When a conference is
cloned from a parent object, users are inherited as well, so that it
is easy to set up a conference that has the same set of participants
or a common administrator. The conference server creates individual
users, assigning them a unique conference user identifier (XCON-
USERID). The XCON-USERID as identifier of each conferencing system
client is introduced in the XCON framework and defined in the XCON
common data model. Each CCMP request, with an exception pointed out
in Section 5.3.6 representing the case of a user at his first
entrance in the system as a conference participant, must carry the
XCON-USERID of the requestor in the proper <confUserID> parameter.
The XCON-USERID acts as a pointer to the user's profile as a
conference actor, e.g., her signaling URI and other XCON protocol
URIs in general, her role (moderator, participant, observer, etc.),
her display text, her joining information, and so on. A variety of
elements defined in the common <conference-info> element as specified
in the XCON data model are used to describe the users related to a
conference including the <users> element, as well as each <user>
element included within it. For example, it is possible to determine
how a specific user expects and is allowed to join a conference by
looking at the <allowed-users-list> in <users>: each <target> element
involved in such a list represents a user and shows a 'method'
attribute defining how the user is expected to join the conference,
i.e., "dial-in" for users that are allowed to dial, "dial-out" for
users that the conference focus will be trying to reach (with
"dial-in" being the default mode). If the conference is currently
active, dial-out users are contacted immediately; otherwise, they are
contacted at the start of the conference. CCMP, acting as the
conference control protocol, provides a means to manipulate these and
other kinds of user-related features.
As a consequence of an explicit user registration to a specific XCON
conferencing system, conferencing clients are usually provided
(besides the XCON-USERID) with log-in credentials (i.e., username and
password). Such credentials can be used to authenticate the XCON-
aware client issuing CCMP requests. Thus, both username and password
should be carried in a CCMP request as part of the "subject"
parameter whenever a registered conferencing client wishes to contact
a CCMP server. CCMP does not maintain a user's subscriptions at the
conference server; hence, it does not provide any specific mechanism
allowing clients to register their conferencing accounts. The
"subject" parameter is just used for carrying authentication data
associated with pre-registered clients, with the specific
registration modality outside the scope of this document.
4. Protocol Overview
CCMP is a client-server, XML-based protocol for user creation,
retrieval, modification, and deletion of conference objects. CCMP is
a stateless protocol, such that implementations can safely handle
transactions independently from each other. CCMP messages are XML
documents or XML document fragments compliant with the XCON data
model representation [RFC6501].
Section 4.1 specifies the basic operations that can create, retrieve,
modify, and delete conference-related information in a centralized
conference. The core set of objects manipulated by CCMP includes
conference blueprints, the conference object, users, and sidebars.
Each operation in the protocol model, as summarized in Section 4.1,
is atomic and either succeeds or fails as a whole. The conference
server MUST ensure that the operations are atomic in that the
operation invoked by a specific conferencing client completes prior
to another client's operation on the same conference object. While
the details for this data locking functionality are out of scope for
the CCMP specification and are implementation specific for a
conference server, some core functionality for ensuring the integrity
of the data is provided by CCMP as described in Section 4.2.
While the XML documents that are carried in CCMP need to comply with
the XCON data model, there are situations in which the values for
mandatory elements are unknown by the client. The mechanism for
ensuring compliance with the data model in these cases is described
in Section 4.3.
CCMP is completely independent from underlying protocols, which means
that there can be different ways to carry CCMP messages from a
conferencing client to a conference server. The specification
describes the use of HTTP as a transport solution, including CCMP
requests in HTTP POST messages and CCMP responses in HTTP 200 OK
replies. This implementation approach is further described in
Section 4.4.
4.1. Protocol Operations
The main operations provided by CCMP belong in four general
categories:
create: for the creation of a conference object, a conference user,
a sidebar, or a blueprint.
retrieve: to get information about the current state of either a
conference object (be it an actual conference, a blueprint, or a
sidebar) or a conference user. A retrieve operation can also be
used to obtain the XCON-URIs of the current conferences (active or
registered) handled by the conferencing server and/or the
available blueprints.
update: to modify the current features of a specified conference or
conference user.
delete: to remove from the system a conference object or a
conference user.
Thus, the main targets of CCMP operations are as follows:
o conference objects associated with either active or registered
conferences,
o conference objects associated with blueprints,
o conference objects associated with sidebars, both embedded in the
main conference (i.e., <entry> elements in <sidebars-by-value>)
and external to it (i.e., whose XCON-URIs are included in the
<entry> elements of <sidebars-by-ref>),
o <user> elements associated with conference users, and
o the list of XCON-URIs related to conferences and blueprints
available at the server, for which only retrieval operations are
allowed.
4.2. Data Management
The XCON framework defines a model whereby the conference server
centralizes and maintains the conference information. Since multiple
clients can modify the same conference objects, a conferencing client
might not have the latest version of a specific conference object
when it initiates operations. To determine whether the client has
the most up-to-date conference information, CCMP defines a versioning
approach. Each conference object is associated with a version
number. All CCMP response messages containing a conference document
(or a fragment thereof) MUST contain a <version> parameter. When a
client sends an update message to the server, which includes
modifications to a conference object, if the modifications are all
successfully applied, the server MUST return a response, with a
<response-code> of "200", containing the version number of the
modified object. With this approach, a client working on version "X"
of a conference object that receives a response, with a <response-
code> of "200", with a version number that is "X+1" can be certain
that the version it manipulated was the most up to date. However, if
the response contains a version that is at least "X+2", the client
knows that the object modified by the server was more up to date than
the object the client was manipulating. In order to ensure that the
client always has the latest version of the modified object, the
client can send a request to the conference server to retrieve the
conference object. The client can then update the relevant data
elements in the conference object prior to invoking a specific
operation. Note that a client subscribed to the XCON event package
[RFC6502] notifications about conference object modifications, will
receive the most up-to-date version of that object upon receipt of a
notification.
The "version" parameter is OPTIONAL for requests, since it is not
needed by the server: as long as the required modifications can be
applied to the target conference object without conflicts, the server
does not care whether the client has stored an up-to-date view of the
information. In addition, to ensure the integrity of the data, the
conference server first checks all the parameters, before making any
changes to the internal representation of the conference object. For
example, it would be undesirable to change the <subject> of the
conference, but then detect an invalid URI in one of the <service-
uris> and abort the remaining updates.
4.3. Data Model Compliance
The XCON data model [RFC6501] identifies some elements and attributes
as mandatory. Since the XML documents carried in the body of the
CCMP requests and responses need to be compliant with the XCON data
model, there can be a problem in cases of client-initiated
operations, such as the initial creation of conference objects and
cases whereby a client updates a conference object adding new
elements, such as a new user. In such cases, not all of the
mandatory data can be known in advance by the client issuing a CCMP
request. As an example, a client cannot know, at the time it issues
a conference creation request, the XCON-URI that the server will
assign to the yet-to-be-created conference; hence, it is not able to
populate the mandatory 'entity' attribute of the conference document
contained in the request with the correct value. To solve this
issue, the CCMP client fills all mandatory data model fields, for
which no value is available at the time the request is constructed,
with placeholder values in the form of a wildcard string,
AUTO_GENERATE_X (all uppercase), with X being a unique numeric index
for each data model field for which the value is unknown. This form
of wildcard string is chosen, rather than the use of random unique
strings (e.g., FOO_BAR_LA) or non-numeric values for X, to simplify
processing at the server. The values of AUTO_GENERATE_X are only
unique within the context of the specific request. The placeholder
AUTO_GENERATE_X values MUST be within the value part of an attribute
or element (e.g., <userinfo
entity="xcon-userid:AUTO_GENERATE_1@example.com">).
When the server receives requests containing values in the form of
AUTO_GENERATE_X, the server does the following:
(a) Generates the proper identifier for each instance of
AUTO_GENERATE_X in the document. If an instance of
AUTO_GENERATE_X is not within the value part of the attribute/
element, the server MUST send a <response-code> of "400 Bad
Request". In cases where AUTO_GENERATE_X appears only in the
user part of a URI (i.e., in the case of XCON-USERIDs or XCON-
URIs), the server needs to ensure that the domain name is one
that is within the server's domain of responsibility. If the
domain name is not within the server's domain of responsibility,
then the server MUST send a <response-code> of "427 Invalid
Domain Name". The server MUST replace each instance of a
specific wildcard field (e.g., AUTO_GENERATE_1) with the same
identifier. The identifiers MUST be unique for each instance of
AUTO_GENERATE_X within the same XML document received in the
request; for example, the value that replaces AUTO_GENERATE_1
MUST NOT be the same as the value that replaces AUTO_GENERATE_2.
Note that the values that replace the instances of
AUTO_GENERATE_X are not the same across all conference objects;
for example, different values can be used to replace
AUTO_GENERATE_1 in two different documents.
(b) Sends a response in which all values of AUTO_GENERATE_X received
in the request have been replaced by the newly created one(s).
With this approach, compatibility with the data model requirements is
maintained, while allowing for client-initiated manipulation of
conference objects at the server's side. Note that the use of this
mechanism could be avoided in come cases by using multiple
operations, such as creating a new user and then adding the new user
to an existing conference. However, the AUTO_GENERATE_X mechanism
allows a single operation to be used to effect the same change on the
conference object.
4.4. Implementation Approach
CCMP is implemented using HTTP, placing the CCMP request messages
into the body of an HTTP POST operation and placing the CCMP
responses into the body of the HTTP response messages. A non-
exhaustive summary of the other approaches that were considered and
the perceived advantages of the HTTP solution described in this
document are provided in Appendix A.
Most CCMP commands can pend indefinitely, thus increasing the
potential that pending requests can continue to increase when a
server is receiving more requests than it can process within a
specific time period. In this case, a server SHOULD return a
<response-code> of "510" to the pending requests. In addition, to
mitigate the situation, clients MUST NOT wait indefinitely for a
response and MUST implement a timer such that when it expires, the
client MUST close the connection. Thirty seconds is RECOMMENDED as
the default value for this timer. Sixty seconds is considered a
reasonable upper range. Note that there may be cases where a
response message is lost and a request has been successful (e.g.,
user added to a conference); yet, the client will be unaware and
close the connection. However, as described in Section 4.2, there is
a versioning mechanism for the conference objects; thus, there is a
mechanism for the conference object stored by the client to be
brought up to date.
CCMP messages have a MIME-type of "application/ccmp+xml", which
appears inside the Content-Type and Accept header fields of HTTP
requests and responses. The XML documents in the CCMP messages MUST
be encoded in UTF-8. This specification follows the recommendations
and conventions described in [RFC3023], including the naming
convention of the type ('+xml' suffix) and the usage of the 'charset'
parameter. The 'charset' parameter MUST be included with the XML
document. Section 9 provides the complete requirements for an HTTP
implementation to support CCMP.
5. CCMP Messages
CCMP messages are either requests or responses. The general CCMP
request message is defined in Section 5.1. The general CCMP response
message is defined in Section 5.2. The details of the specific
message type that is carried in the CCMP request and response
messages are described in Section 5.3. CCMP response codes are
listed in Section 5.4.
5.1. CCMP Request Message Type
A CCMP request message is comprised of the following parameters:
subject: An OPTIONAL parameter containing the username and password
of the client registered at the conferencing system. Each user
who subscribes to the conferencing system is assumed to be
equipped with those credentials and SHOULD enclose them in each
CCMP request she issues. These fields can be used to control that
the user sending the CCMP request has the authority to perform the
requested operation. The same fields can also be used for other
authorization and authentication procedures.
confUserID: An OPTIONAL parameter containing the XCON-USERID of the
client. The XCON-USERID is used to identify any conferencing
client within the context of the conferencing system and it is
assigned by the conference server for each conferencing client who
interacts with it. The <confUserID> parameter is REQUIRED in the
CCMP request and response messages with the exception of the case
of a user who has no XCON-USERID and who wants to enter, via CCMP,
a conference whose identifier is known. In such case, a side
effect of the request is that the user is provided with an
appropriate XCON-USERID. An example of the aforementioned case
will be provided in Section 5.3.6.
confObjID: An OPTIONAL parameter containing the XCON-URI of the
target conference object.
operation: An OPTIONAL parameter refining the type of specialized
request message. The <operation> parameter is REQUIRED in all
requests except for the blueprintsRequest and confsRequest
specialized messages.
conference-password: The parameter is OPTIONAL except that it MUST
be inserted in all requests whose target conference object is
password-protected i.e., contains the <conference-password>
element in [RFC6501]). A CCMP <response-code> of "423" MUST be
returned if a conference-password is not included in the request
when required.
specialized request message: This is a specialization of the generic
request message (e.g., blueprintsRequest), containing parameters
that are dependent on the specific request sent to the server. A
specialized request message MUST be included in the CCMP request
message. The details for the specialized messages and associated
parameters are provided in Section 5.3.
<!-- Definition of CCMP Request -->
<xs:element name="ccmpRequest" type="ccmp-request-type" />
<!-- Definition of ccmp-request-type-->
<xs:complexType name="ccmp-request-type">
<xs:sequence>
<xs:element name="ccmpRequest"
type="ccmp-request-message-type" />
</xs:sequence>
</xs:complexType>
<!-- Definition of ccmp-request-message-type -->
<xs:complexType abstract="true"
name="ccmp-request-message-type">
<xs:sequence>
<xs:element name="subject" type="subject-type"
minOccurs="0" maxOccurs="1" />
<xs:element name="confUserID" type="xs:string"
minOccurs="0" maxOccurs="1" />
<xs:element name="confObjID" type="xs:string"
minOccurs="0" maxOccurs="1" />
<xs:element name="operation" type="operationType"
minOccurs="0" maxOccurs="1" />
<xs:element name="conference-password" type="xs:string"
minOccurs="0" maxOccurs="1" />
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
Figure 2: Structure of CCMP Request Messages
5.2. CCMP Response Message Type
A CCMP response message is comprised of the following parameters:
confUserID: A REQUIRED parameter in CCMP response messages
containing the XCON-USERID of the conferencing client that issued
the CCMP request message.
confObjID: An OPTIONAL parameter containing the XCON-URI of the
target conference object.
operation: An OPTIONAL parameter for CCMP response messages. This
parameter is REQUIRED in all responses except for the
"blueprintsResponse" and "confsResponse" specialized messages.
response-code: A REQUIRED parameter containing the response code
associated with the request. The response code MUST be chosen
from the codes listed in Section 5.4.
response-string: An OPTIONAL reason string associated with the
response. In case of an error, in particular, this string can be
used to provide the client with detailed information about the
error itself.
version: An OPTIONAL parameter reflecting the current version number
of the conference object referred by the confObjID. This number
is contained in the 'version' attribute of the <conference-info>
element related to that conference. This parameter is REQUIRED in
CCMP response messages and SHOULD NOT be included in CCMP request
messages.
specialized response message: This is specialization of the generic
response message, containing parameters that are dependent on the
specific request sent to the server (e.g., "blueprintsResponse").
A specialized response message SHOULD be included in the CCMP
response message, except in an error situation where the CCMP
request message did not contain a valid specialized message. In
this case, the conference server MUST return a <response-code> of
"400". The details for the specialized messages and associated
parameters are provided in Section 5.3.
<!-- Definition of CCMP Response -->
<xs:element name="ccmpResponse" type="ccmp-response-type" />
<!-- Definition of ccmp-response-type -->
<xs:complexType name="ccmp-response-type">
<xs:sequence>
<xs:element name="ccmpResponse"
type="ccmp-response-message-type" />
</xs:sequence>
</xs:complexType>
<!-- Definition of ccmp-response-message-type -->
<xs:complexType abstract="true"
name="ccmp-response-message-type">
<xs:sequence>
<xs:element name="confUserID" type="xs:string"
minOccurs="1" maxOccurs="1" />
<xs:element name="confObjID" type="xs:string"
minOccurs="0" maxOccurs="1" />
<xs:element name="operation" minOccurs="0"
maxOccurs="1" />
<xs:element name="response-code"
type="response-codeType"
minOccurs="1" maxOccurs="1" />
<xs:element name="response-string" type="xs:string"
minOccurs="0" maxOccurs="1" />
<xs:element name="version" type="xs:positiveInteger"
minOccurs="0" maxOccurs="1" />
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
Figure 3: Structure of CCMP Response Message
5.3. Detailed Messages
Based on the request and response message structures described in
Sections 5.1 and 5.2, the following summarizes the specialized CCMP
request and response types described in this document:
1. blueprintsRequest/blueprintsResponse
2. confsRequest/confsResponse
3. blueprintRequest/blueprintResponse
4. confRequest/confResponse
5. usersRequest/usersResponse
6. userRequest/userResponse
7. sidebarsByValRequest/sidebarsByValResponse
8. sidebarsByRefRequest/sidebarsByRefResponse
9. sidebarByValRequest/sidebarByValResponse
10. sidebarByRefRequest/sidebarByRefResponse
11. extendedRequest/extendedResponse
12. optionsRequest/optionsResponse
These CCMP request/response pairs use the fundamental CCMP operations
as defined in Section 4.1 to manipulate the conference data. These
request/response pairs are included in an IANA registry as defined in
Section 12.5. Table 1 summarizes the remaining CCMP operations and
corresponding actions that are valid for a specific CCMP request
type, noting that neither the blueprintsRequest/blueprintsResponse
nor confsRequest/confsResponse require an <operation> parameter. An
entity MUST support the response message for each of the request
messages that is supported. The corresponding response message MUST
contain the same <operation> parameter. Note that some entries are
labeled "N/A", indicating that the operation is invalid for that
request type. In the case of an "N/A*" label, the operation MAY be
allowed for specific privileged users or system administrators but is
not part of the functionality included in this document.
+---------------+------------+------------+------------+------------+
| Operation | Retrieve | Create | Update | Delete |
| ------------- | | | | |
| Request Type | | | | |
+---------------+------------+------------+------------+------------+
| blueprints | Get list | N/A | N/A | N/A |
| Request | of | | | |
| | blueprints | | | |
| ------------- | ---------- | ---------- | ---------- | ---------- |
| blueprint | Get | N/A* | N/A* | N/A* |
| Request | blueprint | | | |
| ------------- | ---------- | ---------- | ---------- | ---------- |
| confsRequest | Get list | N/A | N/A | N/A |
| | of confs | | | |
| ------------- | ---------- | ---------- | ---------- | ---------- |
| confRequest | Get | Create | Change | Delete |
| | conference | conference | conference | conference |
| | object | object | object | object |
| ------------- | ---------- | ---------- | ---------- | ---------- |
| usersRequest | Get | N/A(**) | Change | N/A(**) |
| | <users> | | <users> | |
| ------------- | ---------- | ---------- | ---------- | ---------- |
| userRequest | Get | Add a | Change | Delete |
| | specified | <user> to | specified | specified |
| | <user> | a conf | <user> | <user> |
| | | (***) | | |
| ------------- | ---------- | ---------- | ---------- | ---------- |
| sidebarsByVal | Get | N/A | N/A | N/A |
| Request | <sidebars- | | | |
| | by-val> | | | |
| ------------- | ---------- | ---------- | ---------- | ---------- |
| sidebarsByRef | Get | N/A | N/A | N/A |
| Request | <sidebars- | | | |
| | by-ref> | | | |
| ------------- | ---------- | ---------- | ---------- | ---------- |
| sidebarByValR | Get | Create | Change | Delete |
| equest | sidebar- | sidebar- | sidebar- | sidebar- |
| | by-val | by-val | by-val | by-val |
| ------------- | ---------- | ---------- | ---------- | ---------- |
| sidebarByRefR | Get | Create | Change | Delete |
| equest | sidebar- | sidebar- | sidebar- | sidebar- |
| | by-ref | by-ref | by-ref | by-ref |
+---------------+------------+------------+------------+------------+
Table 1: Request Type Operation-Specific Processing
(**): These operations are not allowed for a usersRequest message,
since the <users> section, which is the target element of such a
request, is created and removed in conjunction with the creation and
deletion, respectively, of the associated conference document. Thus,
"update" and "retrieve" are the only semantically correct operations
for such message.
(***): This operation can involve the creation of an XCON-USERID, if
the sender does not add it in the <confUserID> parameter and/or if
the entity field of the <userInfo> parameter is void.
Additional parameters included in the specialized CCMP request and
response messages are detailed in the subsequent sections. If a
required parameter is not included in a request, the conference
server MUST return a <response-code> of "400" per Section 5.4.
5.3.1. blueprintsRequest and blueprintsResponse
A blueprintsRequest (Figure 4) message is sent to request the list of
XCON-URIs associated with the available blueprints from the
conference server. These XCON-URIs can be subsequently used by the
client to access detailed information about a specified blueprint
with a specific blueprintRequest message per Section 5.3.3.
The <confUserID> parameter MUST be included in every
blueprintsRequest/Response message and reflect the XCON-USERID of the
conferencing client issuing the request. Since a blueprintsRequest
message is not targeted to a specific conference instance and is a
"retrieve-only" request, the <confObjID> and <operation> parameters
MUST NOT be included in the blueprintsRequest/Response messages.
In order to obtain a specific subset of the available blueprints, a
client may specify a selection filter providing an appropriate xpath
query in the OPTIONAL "xpathFilter" parameter of the request. The
information in the blueprints typically represents general
capabilities and characteristics. For example, to select blueprints
having both audio and video stream support, a possible xpathFilter
value could be: "/conference-info[conference-description/
available-media/entry/type='audio' and conference-description/
available-media/entry/type='video']". A conference server SHOULD NOT
provide any sensitive information (e.g., passwords) in the
blueprints.
The associated blueprintsResponse message SHOULD contain, as shown in
Figure 4, a "blueprintsInfo" parameter containing the above mentioned
XCON-URI list.
<!-- blueprintsRequest -->
<xs:complexType name="ccmp-blueprints-request-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-request-message-type">
<xs:sequence>
<xs:element ref="blueprintsRequest" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- blueprintsRequestType -->
<xs:element name="blueprintsRequest" type="blueprintsRequestType"/>
<xs:complexType name="blueprintsRequestType">
<xs:sequence>
<xs:element name="xpathFilter" type="xs:string" minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- blueprintsResponse -->
<xs:complexType name="ccmp-blueprints-response-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-response-message-type">
<xs:sequence>
<xs:element ref="blueprintsResponse" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- blueprintsResponseType -->
<xs:element name="blueprintsResponse" type="blueprintsResponseType"/>
<xs:complexType name="blueprintsResponseType">
<xs:sequence>
<xs:element name="blueprintsInfo"
type="info:uris-type" minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
Figure 4: Structure of the blueprintsRequest and
blueprintsResponse Messages
5.3.2. confsRequest and confsResponse
A confsRequest message is used to retrieve, from the server, the list
of XCON-URIs associated with active and registered conferences
currently handled by the conferencing system. The <confUserID>
parameter MUST be included in every confsRequest/Response message and
reflect the XCON-USERID of the conferencing client issuing the
request. The <confObjID> parameter MUST NOT be included in the
confsRequest message. The confsRequest message is of a retrieve-only
type, since the sole purpose is to collect information available at
the conference server. Thus, an <operation> parameter MUST NOT be
included in a confsRequest message. In order to retrieve a specific
subset of the available conferences, a client may specify a selection
filter providing an appropriate xpath query in the OPTIONAL
"xpathFilter" parameter of the request. For example, to select only
the registered conferences, a possible xpathFilter value could be "/
conference-info[conference-description/conference-state/
active='false']". The associated confsResponse message SHOULD
contain the list of XCON-URIs in the "confsInfo" parameter. A user,
upon receipt of the response message, can interact with the available
conference objects through further CCMP messages.
<!-- confsRequest -->
<xs:complexType name="ccmp-confs-request-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-request-message-type">
<xs:sequence>
<xs:element ref="confsRequest" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- confsRequestType -->
<xs:element name="confsRequest" type="confsRequestType" />
<xs:complexType name="confsRequestType">
<xs:sequence>
<xs:element name="xpathFilter" type="xs:string" minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- confsResponse -->
<xs:complexType name="ccmp-confs-response-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-response-message-type">
<xs:sequence>
<xs:element ref="confsResponse" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- confsResponseType -->
<xs:element name="confsResponse" type="confsResponseType"/>
<xs:complexType name="confsResponseType">
<xs:sequence>
<xs:element name="confsInfo" type="info:uris-type"
minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
Figure 5: Structure of the confsRequest and confsResponse Messages
5.3.3. blueprintRequest and blueprintResponse
Through a blueprintRequest, a client can manipulate the conference
object associated with a specified blueprint. Along with the
<confUserID> parameter, the request MUST include the <confObjID> and
the <operation> parameters. Again, the <confUserID> parameter MUST
be included in every blueprintRequest/Response message and reflect
the XCON-USERID of the conferencing client issuing the request. The
<confObjID> parameter MUST contain the XCON-URI of the blueprint,
which might have been previously retrieved through a
blueprintsRequest message.
The blueprintRequest message SHOULD NOT contain an <operation>
parameter with a value other than "retrieve". An <operation>
parameter with a value of "create", "update", or "delete" SHOULD NOT
be included in a blueprintRequest message except in the case of
privileged users (e.g., the conference server administration staff),
who might authenticate themselves by the mean of the "subject"
request parameter.
A blueprintRequest/retrieve carrying a <confObjID> parameter whose
value is not associated with one of the available system's
blueprints, will generate, on the server's side, a blueprintResponse
message containing a <response-code> of "404". This also holds for
the case in which the mentioned <confObjID> parameter value is
related to an existing conference document stored at the server, but
associated with an actual conference (be it active or registered) or
with a sidebar rather than a blueprint.
For a <response-code> of "200" in a "retrieve" operation, the
<blueprintInfo> parameter MUST be included in the blueprintResponse
message. The <blueprintInfo> parameter contains the conference
document associated with the blueprint as identified by the
<confObjID> parameter specified in the blueprintRequest.
<!-- blueprintRequest -->
<xs:complexType name="ccmp-blueprint-request-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-request-message-type">
<xs:sequence>
<xs:element ref="blueprintRequest" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- blueprintRequestType -->
<xs:element name="blueprintRequest" type="blueprintRequestType" />
<xs:complexType name="blueprintRequestType">
<xs:sequence>
<xs:element name="blueprintInfo"
type="info:conference-type" minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- blueprintResponse -->
<xs:complexType name="ccmp-blueprint-response-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-response-message-type">
<xs:sequence>
<xs:element ref="blueprintResponse" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- blueprintResponseType -->
<xs:element name="blueprintResponse" type="blueprintResponseType"/>
<xs:complexType name="blueprintResponseType">
<xs:sequence>
<xs:element name="blueprintInfo" type="info:conference-type"
minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded">
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
Figure 6: Structure of the blueprintRequest and
blueprintResponse Messages
5.3.4. confRequest and confResponse
With a confRequest message, CCMP clients can manipulate conference
objects associated with either active or registered conferences. The
<confUserID> parameter MUST be included in every confRequest/Response
message and reflect the XCON-USERID of the conferencing client
issuing the request. confRequest and confResponse messages MUST also
include an <operation> parameter. ConfResponse messages MUST return
to the requestor a <response-code> and MAY contain a <response-
string> explaining it. Depending upon the type of operation, a
<confObjID> and <confInfo> parameter MAY be included in the
confRequest and response. For each type of operation, the text below
describes whether the <confObjID> and <confInfo> parameters need to
be included in the confRequest and confResponse messages.
The creation case deserves care. To create a new conference through
a confRequest message, two approaches can be considered:
1. Creation through explicit cloning: the <confObjID> parameter MUST
contain the XCON-URI of the blueprint or of the conference to be
cloned, while the <confInfo> parameter MUST NOT be included in
the confRequest. Note that cloning of an active conference is
only done in the case of a sidebar operation per the XCON
framework and as described in Section 5.3.8.
2. Creation through implicit cloning (also known as "direct
creation"): the <confObjID> parameter MUST NOT be included in the
request and the CCMP client can describe the desired conference
to be created using the <confInfo> parameter. If no <confInfo>
parameter is provided in the request, the new conference will be
created as a clone of the system default blueprint.
In both creation cases, the confResponse, for a successful completion
of a "create" operation, contains a <response-code> of "200" and MUST
contain the XCON-URI of the newly created conference in the
<confObjID> parameter, in order to allow the conferencing client to
manipulate that conference through following CCMP requests. In
addition, the <confInfo> parameter containing the conference document
created MAY be included, at the discretion of the conferencing system
implementation, along with the REQUIRED <version> parameter
initialized at "1", since, at creation time, the conference object is
at its first version.
In the case of a confRequest with an <operation> parameter of
"retrieve", the <confObjID> parameter representing the XCON-URI of
the target conference MUST be included and the <confInfo> parameter
MUST NOT be included in the request. The conference server MUST
ignore any <confInfo> parameter that is received in a confRequest
"retrieve" operation. If the confResponse for the retrieve operation
contains a <response-code> of "200", the <confInfo> parameter MUST be
included in the response. The <confInfo> parameter MUST contain the
entire conference document describing the target conference object in
its current state. The current state of the retrieved conference
object MUST also be reported in the proper "version" response
parameter.
In case of a confRequest with an <operation> parameter of "update",
the <confInfo> and <confObjID> parameters MUST be included in the
request. The <confInfo> represents an object of type
"conference-type" containing all the changes to be applied to the
conference whose identifier has the same value as the <confObjID>
parameter. Note that, in such a case, though the <confInfo>
parameter indeed has to follow the rules indicated in the XCON data
model, it does not represent the entire updated version of the target
conference, since it conveys just the modifications to apply to that
conference. For example, in order to change the conference title,
the <confInfo> parameter will be of the form:
<confInfo entity="xcon:8977777@example.com">
<conference-description>
<display-text> *** NEW CONFERENCE TITLE *** </display-text>
</conference-description>
</confInfo>
Figure 7: Updating a Conference Object: Modifying the
Title of a Conference
Similarly, to remove the title of an existing conference, a
confRequest/update carrying the following <confInfo> parameter would
do the job.
<confInfo entity="xcon:8977777@example.com">
<conference-description>
<display-text/>
</conference-description>
</confInfo>
Figure 8: Updating a Conference Object:
Removing the Title of a Conference
In the case of a confResponse/update with a <response-code> of "200",
no additional information is REQUIRED in the response message, which
means the return of a <confInfo> parameter is OPTIONAL. A subsequent
confRequest/retrieve transaction might provide the CCMP client with
the current status of the conference after the modification, or the
notification protocol might address that task as well. A <response-
code> of "200" indicates that the conference object has been changed
according to the request by the conference server. The <version>
parameter MUST be enclosed in the confResponse/update message, in
order to let the client understand what is the current conference-
object version, upon the applied modifications. A <response-code> of
"409" indicates that the changes reflected in the <confInfo>
parameter of the request are not feasible. This could be due to
policies, requestor roles, specific privileges, unacceptable values,
etc., with the reason specific to a conferencing system and its
configuration. Together with a <response-code> of "409", the
<version> parameter MUST be attached in the confResponse/update,
allowing the client to later retrieve the current version of the
target conference if the one she attempted to modify was not the most
up to date.
In the case of a confRequest with an <operation> parameter of
"delete", the <confObjID> parameter representing the XCON-URI of the
target conference MUST be included while the <confInfo> parameter
MUST NOT be included in the request. The conference server MUST
ignore any <confInfo> parameter that is received within such a
request. The confResponse MUST contain the same value for the
<confObjID> parameter that was included in the confRequest. If the
confResponse/delete operation contains a <response-code> of "200",
the conference indicated in the <confObjID> parameter has been
successfully deleted. A confResponse/delete with a <response-code>
of "200" MUST NOT contain the <confInfo> parameter. The <version>
parameter SHOULD NOT be returned in any confResponse/delete. If the
conference server cannot delete the conference referenced by the
<confObjID> parameter received in the confRequest because it is the
parent of another conference object that is in use, the conference
server MUST return a <response-code> of "425".
A confRequest with an <operation> parameter of "retrieve", "update",
or "delete" carrying a <confObjID> parameter which is not associated
with one of the conferences (active or registered) that the system is
holding will generate, on the server's side, a confResponse message
containing a <response-code> of "404". This also holds for the case
in which the mentioned <confObjID> parameter is related to an
existing conference object stored at the server, but associated with
a blueprint or with a sidebar rather than an actual conference.
The schema for the confRequest/confResponse pair is shown in
Figure 9.
<!-- confRequest -->
<xs:complexType name="ccmp-conf-request-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-request-message-type">
<xs:sequence>
<xs:element ref="confRequest" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- confRequestType -->
<xs:element name="confRequest" type="confRequestType" />
<xs:complexType name="confRequestType">
<xs:sequence>
<xs:element name="confInfo" type="info:conference-type"
minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- confResponse -->
<xs:complexType name="ccmp-conf-response-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-response-message-type">
<xs:sequence>
<xs:element ref="confResponse" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- confResponseType -->
<xs:element name="confResponse" type="confResponseType" />
<xs:complexType name="confResponseType">
<xs:sequence>
<xs:element name="confInfo" type="info:conference-type"
minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
Figure 9: Structure of the confRequest and confResponse Messages
5.3.5. usersRequest and usersResponse
The usersRequest message allows a client to manipulate the <users>
element of the conference object represented by the <confObjID>
parameter. The <users> element contains the list of <user> elements
associated with conference participants, the list of the users to
which access to the conference is allowed/denied, conference
participation policies, etc. The <confObjID> parameter MUST be
included in a usersRequest message.
A <usersInfo> parameter MAY be included in a usersRequest message
depending upon the operation. If the <usersInfo> parameter is
included in the usersRequest message, the parameter MUST be compliant
with the <users> field of the XCON data model.
Two operations are allowed for a usersRequest message:
1. "retrieve": In this case the request MUST NOT include a
<usersInfo> parameter, while the successful response MUST contain
the desired <users> element in the <usersInfo> parameter. The
conference server MUST ignore a <usersInfo> parameter if it is
received in a request with an <operation> parameter of
"retrieve".
2. "update": In this case, the <usersInfo> parameter MUST contain
the modifications to be applied to the <users> element indicated.
If the <response-code> is "200", then the <usersInfo> parameter
SHOULD NOT be returned. Any <usersInfo> parameter that is
returned SHOULD be ignored. A <response-code> of "426" indicates
that the conferencing client is not allowed to make the changes
reflected in the <usersInfo> contained in the usersRequest
message. This could be due to policies, roles, specific
privileges, etc., with the reason being specific to a
conferencing system and its configuration.
Operations of "create" and "delete" are not applicable to a
usersRequest message and MUST NOT be considered by the server, which
means that a <response-code> of "403" MUST be included in the
usersResponse message.
<!-- usersRequest -->
<xs:complexType name="ccmp-users-request-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-request-message-type">
<xs:sequence>
<xs:element ref="usersRequest" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- usersRequestType -->
<xs:element name="usersRequest" type="usersRequestType" />
<xs:complexType name="usersRequestType">
<xs:sequence>
<xs:element name="usersInfo"
type="info:users-type" minOccurs="0" />
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- usersResponse -->
<xs:complexType name="ccmp-users-response-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-response-message-type">
<xs:sequence>
<xs:element ref="usersResponse" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- usersResponseType -->
<xs:element name="usersResponse" type="usersResponseType" />
<xs:complexType name="usersResponseType">
<xs:sequence>
<xs:element name="usersInfo" type="info:users-type"
minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
Figure 10: Structure of the usersRequest and usersResponse Messages
5.3.6. userRequest and userResponse
A userRequest message is used to manipulate <user> elements inside a
conference document associated with a conference identified by the
<confObjID> parameter. Besides retrieving information about a
specific conference user, the message is used to request that the
conference server either create, modify, or delete information about
a user. A userRequest message MUST include the <confObjID> and the
<operation> parameters, and it MAY include a <userInfo> parameter
containing the detailed user's information depending upon the
operation and whether the <userInfo> has already been populated for a
specific user. Note that a user may not necessarily be a
conferencing control client (i.e., some participants in a conference
are not "XCON aware").
An XCON-USERID SHOULD be assigned to each and every user subscribed
to the system. In such a way, a user who is not a conference
participant can make requests (provided she has successfully passed
authorization and authentication checks), like creating a conference
or retrieving conference information.
Conference users can be created in a number of different ways. In
each of these cases, the <operation> parameter MUST be set to
"create" in the userRequest message. Each of the userResponse
messages for these cases MUST include the <confObjID>, <confUserID>,
<operation>, and <response-code> parameters. In the case of a
<response-code> of "200", the userResponse message MAY include the
<userInfo> parameter depending upon the manner in which the user was
created:
o A conferencing client with an XCON-USERID adds itself to the
conference: In this case, the <userInfo> parameter MAY be included
in the userRequest. The <userInfo> parameter MUST contain a
<user> element (compliant with the XCON data model) and the
'entity' attribute MUST be set to a value that represents the
XCON-USERID of the user initiating the request. No additional
parameters beyond those previously described are required in the
userResponse message, in the case of a <response-code> of "200".
o A conferencing client acts on behalf of another user whose XCON-
USERID is known: In this case, the <userInfo> parameter MUST be
included in the userRequest. The <userInfo> parameter MUST
contain a <user> element and the 'entity' attribute value MUST be
set to the XCON-USERID of the other user in question. No
additional parameters beyond those previously described are
required in the userResponse message, in the case of a <response-
code> of "200".
o A conferencing client who has no XCON-USERID and who wants to
enter, via CCMP, a conference whose identifier is known: In this
case, a side effect of the request is that the user is provided
with a new XCON-USERID (created by the server) carried inside the
<confUserID> parameter of the response. This is the only case in
which a CCMP request can be valid though carrying a void
<confUserID> parameter. A <userInfo> parameter MUST be enclosed
in the request, providing at least a contact URI of the joining
client, in order to let the focus initiate the signaling phase
needed to add her to the conference. The mandatory 'entity'
attribute of the <userInfo> parameter in the request MUST be
filled with a placeholder value with the user part of the XCON-
USERID containing a value of AUTO_GENERATE_X as described in
Section 4.3, to conform to the rules contained in the XCON data
model XML schema. The messages (userRequest and userResponse) in
this case should look like the following:
Request fields:
confUserID=null;
confObjID=confXYZ;
operation=create;
userInfo=
<userInfo entity="xcon-userid:AUTO_GENERATE_1@example.com">
<endpoint entity="sip:GHIL345@example.com">
...
Response fields (in case of success):
confUserID=user345;
confObjID=confXYZ;
operation=create;
response-code=200;
userInfo=null; //or the entire userInfo object
Figure 11: userRequest and userResponse in the
Absence of an xcon-userid
o A conferencing client is unaware of the XCON-USERID of a third
user: In this case, the XCON-USERID in the request, <confUserID>,
is the sender's and the 'entity' attribute of the attached
<userInfo> parameter is filled with the placeholder value
"xcon-userid:AUTO_GENERATE_1@example.com". The XCON-USERID for
the third user MUST be returned to the client issuing the request
in the 'entity' attribute of the response <userInfo> parameter, if
the <response-code> is "200". This scenario is intended to
support both the case where a brand new conferencing system user
is added to a conference by a third party (i.e., a user who has
not yet been provided with an XCON-USERID) and the case where the
CCMP client issuing the request does not know the to-be-added
user's XCON-USERID (which means such an identifier could already
exist on the server's side for that user). In this last case, the
conference server is in charge of avoiding XCON-URI duplicates for
the same conferencing client, looking at key fields in the
request-provided <userInfo> parameter, such as the signaling URI.
If the joining user is brand new, then the generation of a new
XCON-USERID is needed; otherwise, if that user exists already, the
server must recover the corresponding XCON-USERID.
In the case of a userRequest with an <operation> parameter of
"retrieve", the <confObjID> parameter representing the XCON-URI of
the target conference MUST be included. The <confUserID>, containing
the CCMP client's XCON-USERID, MUST also be included in the
userRequest message. If the client wants to retrieve information
about her profile in the specified conference, no <userInfo>
parameter is needed in the retrieve request. On the other hand, if
the client wants to obtain someone else's info within the given
conference, she MUST include in the userRequest/retrieve a <userInfo>
parameter whose 'entity' attribute conveys the desired user's XCON-
USERID. If the userResponse for the retrieve operation contains a
<response-code> of "200", the <userInfo> parameter MUST be included
in the response.
In case of a userRequest with an <operation> parameter of "update",
the <confObjID>, <confUserID>, and <userInfo> parameters MUST be
included in the request. The <userInfo> parameter is of type "user-
type" and contains all the changes to be applied to a specific <user>
element in the conference object identified by the <confObjID>
parameter in the userRequest message. The user to be modified is
identified through the 'entity' attribute of the <userInfo> parameter
included in the request. In the case of a userResponse with a
<response-code> of "200", no additional information is required in
the userResponse message. A <response-code> of "200" indicates that
the referenced <user> element has been updated by the conference
server. A <response-code> of "426" indicates that the conferencing
client is not allowed to make the changes reflected in the <userInfo>
in the initial request. This could be due to policies, roles,
specific privileges, etc., with the reason specific to a conferencing
system and its configuration.
In the case of a userRequest with an <operation> parameter of
"delete", the <confObjID> representing the XCON-URI of the target
conference MUST be included. The <confUserID> parameter, containing
the CCMP client's XCON-USERID, MUST be included in the userRequest
message. If the client wants to exit the specified conference, no
<userInfo> parameter is needed in the delete request. On the other
hand, if the client wants to remove another participant from the
given conference, she MUST include in the userRequest/delete a
<userInfo> parameter whose 'entity' attribute conveys the XCON-USERID
of that participant. The userResponse MUST contain the same value
for the <confObjID> parameter that was included in the <confObjID>
parameter in the userRequest. The userResponse MUST contain a
<response-code> of "200" if the target <user> element has been
successfully deleted. If the userResponse for the delete operation
contains a <response-code> of "200", the userResponse MUST NOT
contain the <userInfo> parameter.
<!-- userRequest -->
<xs:complexType name="ccmp-user-request-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-request-message-type">
<xs:sequence>
<xs:element ref="userRequest" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- userRequestType -->
<xs:element name="userRequest" type="userRequestType" />
<xs:complexType name="userRequestType">
<xs:sequence>
<xs:element name="userInfo"
type="info:user-type" minOccurs="0" />
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- userResponse -->
<xs:complexType name="ccmp-user-response-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-response-message-type">
<xs:sequence>
<xs:element ref="userResponse" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- userResponseType -->
<xs:element name="userResponse" type="userResponseType" />
<xs:complexType name="userResponseType">
<xs:sequence>
<xs:element name="userInfo" type="info:user-type"
minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
Figure 12: Structure of the userRequest and userResponse Messages
5.3.7. sidebarsByValRequest and sidebarsByValResponse
A sidebarsByValRequest message is used to execute a retrieve-only
operation on the <sidebars-by-val> field of the conference object
represented by the <confObjID>. The sidebarsByValRequest message is
of a retrieve-only type, so an <operation> parameter MUST NOT be
included in a sidebarsByValRequest message. As with blueprints and
conferences, CCMP allows for the use of xpath filters whenever a
selected subset of the sidebars available at the server's side has to
be retrieved by the client. This applies both to sidebars by
reference and sidebars by value. A sidebarsByValResponse message
with a <response-code> of "200" MUST contain a <sidebarsByValInfo>
parameter containing the desired <sidebars-by-val> element. A
sidebarsByValResponse message MUST return to the client a <version>
element related to the current version of the main conference object
(i.e., the one whose identifier is contained in the <confObjID> field
of the request) with which the sidebars in question are associated.
The <sidebarsByValInfo> parameter contains the list of the conference
objects associated with the sidebars by value derived from the main
conference. The retrieved sidebars can then be updated or deleted
using the sidebarByValRequest message, which is described in
Section 5.3.8.
<!-- sidebarsByValRequest -->
<xs:complexType name="ccmp-sidebarsByVal-request-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-request-message-type">
<xs:sequence>
<xs:element ref="sidebarsByValRequest"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- sidebarsByValRequestType -->
<xs:element name="sidebarsByValRequest"
type="sidebarsByValRequestType" />
<xs:complexType name="sidebarsByValRequestType">
<xs:sequence>
<xs:element name="xpathFilter" type="xs:string" minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- sidebarsByValResponse -->
<xs:complexType name="ccmp-sidebarsByVal-response-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-response-message-type">
<xs:sequence>
<xs:element ref="sidebarsByValResponse"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- sidebarsByValResponseType -->
<xs:element name="sidebarsByValResponse"
type="sidebarsByValResponseType" />
<xs:complexType name="sidebarsByValResponseType">
<xs:sequence>
<xs:element name="sidebarsByValInfo"
type="info:sidebars-by-val-type" minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
Figure 13: Structure of the sidebarsByValRequest and
sidebarsByValResponse Messages
5.3.8. sidebarByValRequest and sidebarByValResponse
A sidebarByValRequest message MUST contain the <operation> parameter,
which distinguishes among retrieval, creation, modification, and
deletion of a specific sidebar. The other required parameters depend
upon the type of operation.
In the case of a "create" operation, the <confObjID> parameter MUST
be included in the sidebyValRequest message. In this case, the
<confObjID> parameter contains the XCON-URI of the main conference in
which the sidebar has to be created. If no "sidebarByValInfo"
parameter is included, the sidebar is created by cloning the main
conference, as envisioned in the XCON framework [RFC5239] following
the implementation specific cloning rules. Otherwise, similar to the
case of direct creation, the sidebar conference object is built on
the basis of the "sidebarByValInfo" parameter provided by the
requestor. As a consequence of a sidebar-by-val creation, the
conference server MUST update the main conference object reflected by
the <confObjID> parameter in the sidebarbyValRequest/create message
introducing the new sidebar object as a new <entry> in the proper
section <sidebars-by-val>. The newly created sidebar conference
object MAY be included in the sidebarByValResponse in the
<sidebarByValInfo> parameter, if the <response-code> is "200". The
XCON-URI of the newly created sidebar MUST appear in the <confObjID>
parameter of the response. The conference server can notify any
conferencing clients that have subscribed to the conference event
package and that are authorized to receive the notification of the
addition of the sidebar to the conference.
In the case of a sidebarByValRequest message with an <operation>
parameter of "retrieve", the URI for the conference object created
for the sidebar (received in response to a create operation or in a
sidebarsByValResponse message) MUST be included in the <confObjID>
parameter in the request. This retrieve operation is handled by the
conference server in the same manner as in the case of an <operation>
parameter of "retrieve" included in a confRequest message, as
described in Section 5.3.4.
In the case of a sidebarByValRequest message with an <operation>
parameter of "update", the <sidebarByValInfo> MUST also be included
in the request. The <confObjID> parameter contained in the request
message identifies the specific sidebar instance to be updated. An
update operation on the specific sidebar instance contained in the
<sidebarByValInfo> parameter is handled by the conference server in
the same manner as an update operation on the conference instance as
reflected by the <confInfo> parameter included in a confRequest
message as detailed in Section 5.3.4. A sidebarByValResponse message
MUST return to the client a <version> element related to the current
version of the sidebar whose identifier is contained in the
<confObjID> field of the request.
If an <operation> parameter of "delete" is included in the
sidebarByVal request, the <sidebarByValInfo> parameter MUST NOT be
included in the request. Any <sidebarByValInfo> included in the
request MUST be ignored by the conference server. The URI for the
conference object associated with the sidebar MUST be included in the
<confObjID> parameter in the request. If the specific conferencing
user, as reflected by the <confUserID> parameter, in the request is
authorized to delete the conference, the conference server deletes
the conference object reflected by the <confObjID> parameter and
updates the data in the conference object from which the sidebar was
cloned. The conference server can notify any conferencing clients
that have subscribed to the conference event package and that are
authorized to receive the notification of the deletion of the sidebar
from the conference.
If a sidebarByValRequest with an <operation> parameter of "retrieve",
"update", or "delete" carries a <confObjID> parameter which is not
associated with any existing sidebar-by-val, a confResponse message
containing a <response-code> of "404" will be generated on the
server's side. This also holds for the case in which the mentioned
<confObjID> parameter is related to an existing conference object
stored at the server, but associated with a blueprint or with an
actual conference or with a sidebar-by-ref rather than a sidebar-by-
val.
<!-- sidebarByValRequest -->
<xs:complexType name="ccmp-sidebarByVal-request-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-request-message-type">
<xs:sequence>
<xs:element ref="sidebarByValRequest"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- sidebarByValRequestType -->
<xs:element name="sidebarByValRequest"
type="sidebarByValRequestType" />
<xs:complexType name="sidebarByValRequestType">
<xs:sequence>
<xs:element name="sidebarByValInfo"
type="info:conference-type" minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- sidebarByValResponse -->
<xs:complexType name="ccmp-sidebarByVal-response-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-response-message-type">
<xs:sequence>
<xs:element ref="sidebarByValResponse"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- sidebarByValResponseType -->
<xs:element name="sidebarByValResponse"
type="sidebarByValResponseType" />
<xs:complexType name="sidebarByValResponseType">
<xs:sequence>
<xs:element name="sidebarByValInfo"
type="info:conference-type" minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
Figure 14: Structure of the sidebarByValRequest and
sidebarByValResponse Messages
5.3.9. sidebarsByRefRequest and sidebarsByRefResponse
Similar to the sidebarsByValRequest, a sidebarsByRefRequest can be
invoked to retrieve the <sidebars-by-ref> element of the conference
object identified by the <confObjID> parameter. The
sidebarsByRefRequest message is of a retrieve-only type, so an
<operation> parameter MUST NOT be included in a sidebarsByRefRequest
message. In the case of a <response-code> of "200", the
<sidebarsByRefInfo> parameter, containing the <sidebars-by-ref>
element of the conference object, MUST be included in the response.
The <sidebars-by-ref> element represents the set of URIs of the
sidebars associated with the main conference, whose description (in
the form of a standard XCON conference document) is external to the
main conference itself. Through the retrieved URIs, it is then
possible to access single sidebars using the sidebarByRefRequest
message, described in Section 5.3.10. A sidebarsByRefResponse
message MUST carry back to the client a <version> element related to
the current version of the main conference object (i.e., the one
whose identifier is contained in the <confObjId> field of the
request) with which the sidebars in question are associated.
<!-- sidebarsByRefRequest -->
<xs:complexType name="ccmp-sidebarsByRef-request-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-request-message-type">
<xs:sequence>
<xs:element ref="sidebarsByRefRequest"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- sidebarsByRefRequestType -->
<xs:element name="sidebarsByRefRequest"
type="sidebarsByRefRequestType" />
<xs:complexType name="sidebarsByRefRequestType">
<xs:sequence>
<xs:element name="xpathFilter"
type="xs:string" minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- sidebarsByRefResponse -->
<xs:complexType name="ccmp-sidebarsByref-response-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-response-message-type">
<xs:sequence>
<xs:element ref="sidebarsByRefResponse"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- sidebarsByRefResponseType -->
<xs:element name="sidebarsByRefResponse"
type="sidebarsByRefResponseType" />
<xs:complexType name="sidebarsByRefResponseType">
<xs:sequence>
<xs:element name="sidebarsByRefInfo"
type="info:uris-type" minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
Figure 15: Structure of the sidebarsByRefRequest
and sidebarsByRefResponse Messages
5.3.10. sidebarByRefRequest and sidebarByRefResponse
A sidebarByValResponse message MUST return to the client a <version>
element related to the current version of the sidebar whose
identifier is contained in the <confObjID> field of the request.
In the case of a create operation, the <confObjID> parameter MUST be
included in the sidebyRefRequest message. In this case, the
<confObjID> parameter contains the XCON-URI of the main conference in
which the sidebar has to be created. If no <sidebarByRefInfo>
parameter is included, following the XCON framework [RFC5239], the
sidebar is created by cloning the main conference, observing the
implementation-specific cloning rules. Otherwise, similar to the
case of direct creation, the sidebar conference object is built on
the basis of the <sidebarByRefInfo> parameter provided by the
requestor. If the creation of the sidebar is successful, the
conference server MUST update the <sidebars-by-ref> element in the
conference object from which the sidebar was created (i.e., as
identified by the <confObjID> in the original sidebarByRefRequest),
with the URI of the newly created sidebar. The newly created
conference object MAY be included in the response in the
<sidebarByRefInfo> parameter with a <response-code> of "200". The
URI for the conference object associated with the newly created
sidebar object MUST appear in the <confObjID> parameter of the
response. The conference server can notify any conferencing clients
that have subscribed to the conference event package and that are
authorized to receive the notification of the addition of the sidebar
to the conference.
In the case of a sidebarByRefRequest message with an <operation>
parameter of "retrieve", the URI for the conference object created
for the sidebar MUST be included in the <confObjID> parameter in the
request. A retrieve operation on the <sidebarByRefInfo> is handled
by the conference server in the same manner as a retrieve operation
on the confInfo included in a confRequest message as detailed in
Section 5.3.4.
In the case of a sidebarByRefRequest message with an <operation>
parameter of "update", the URI for the conference object created for
the sidebar MUST be included in the <confObjID> parameter in the
request. The <sidebarByRefInfo> MUST also be included in the request
in the case of an "update" operation. An update operation on the
<sidebarByRefInfo> is handled by the conference server in the same
manner as an update operation on the <confInfo> included in a
confRequest message as detailed in Section 5.3.4. A
sidebarByRefResponse message MUST carry back to the client a
<version> element related to the current version of the sidebar whose
identifier is contained in the <confObjID> field of the request.
If an <operation> parameter of "delete" is included in the
sidebarByRefRequest, the <sidebarByRefInfo> parameter MUST NOT be
included in the request. Any <sidebarByRefInfo> included in the
request MUST be ignored by the conference server. The URI for the
conference object for the sidebar MUST be included in the <confObjID>
parameter in the request. If the specific conferencing user as
reflected by the <confUserID> parameter in the request is authorized
to delete the conference, the conference server SHOULD delete the
conference object reflected by the <confObjID> parameter and SHOULD
update the <sidebars-by-ref> element in the conference object from
which the sidebar was originally cloned. The conference server can
notify any conferencing clients that have subscribed to the
conference event package and that are authorized to receive the
notification of the deletion of the sidebar.
If a sidebarByRefRequest with an <operation> parameter of "retrieve",
"update", or "delete" carries a <confObjID> parameter that is not
associated with any existing sidebar-by-ref, a confResponse message
containing a <response-code> of "404" will be generated on the
server's side. This also holds for the case in which the value of
the mentioned <confObjID> parameter is related to an existing
conference object stored at the server, but associated with a
blueprint or with an actual conference or with a sidebar-by-val
rather than a sidebar-by-ref.
<!-- sidebarByRefRequest -->
<xs:complexType name="ccmp-sidebarByRef-request-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-request-message-type">
<xs:sequence>
<xs:element ref="sidebarByRefRequest"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- sidebarByRefRequestType -->
<xs:element name="sidebarByRefRequest"
type="sidebarByRefRequestType" />
<xs:complexType name="sidebarByRefRequestType">
<xs:sequence>
<xs:element name="sidebarByRefInfo"
type="info:conference-type" minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- sidebarByRefResponse -->
<xs:complexType name="ccmp-sidebarByRef-response-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-response-message-type">
<xs:sequence>
<xs:element ref="sidebarByRefResponse"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- sidebarByRefResponseType -->
<xs:element name="sidebarByRefResponse"
type="sidebarByRefResponseType" />
<xs:complexType name="sidebarByRefResponseType">
<xs:sequence>
<xs:element name="sidebarByRefInfo"
type="info:conference-type" minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
Figure 16: Structure of the sidebarByRefRequest
and sidebarByRefResponse Messages
5.3.11. extendedRequest and extendedResponse
In order to allow specifying new request and response pairs for
conference control, CCMP defines the extendedRequest and
extendedResponse messages. Such messages constitute a CCMP skeleton
in which implementers can transport the information needed to realize
conference control mechanisms not explicitly envisioned in the CCMP
specification; these mechanisms are called, in this context,
"extensions". Each extension is assumed to be characterized by an
appropriate name that MUST be carried in the extendedRequest/
extendedResponse pair in the provided <extensionName> field.
Extension-specific information can be transported in the form of
schema-defined XML elements inside the <any> element present in both
extendedRequest and extendedResponse.
The conferencing client SHOULD be able to determine the extensions
supported by a CCMP server and to recover the XML schema defining the
related specific elements by means of an optionsRequest/
optionsResponse CCMP transaction (see Section 5.3.12).
The meaning of the common CCMP parameters inherited by the
extendedRequest and extendedResponse from the basic CCMP request and
response messages SHOULD be preserved and exploited appropriately
while defining an extension.
<!-- extendedRequest -->
<xs:complexType name="ccmp-extended-request-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-request-message-type">
<xs:sequence>
<xs:element ref="extendedRequest"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- extendedRequestType -->
<xs:element name="extendedRequest" type="extendedRequestType"/>
<xs:complexType name="extendedRequestType">
<xs:sequence>
<xs:element name="extensionName"
type="xs:string" minOccurs="1"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0"
maxOccurs="unbounded" />
</xs:sequence>
</xs:complexType>
<!-- extendedResponse -->
<xs:complexType name="ccmp-extended-response-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-response-message-type">
<xs:sequence>
<xs:element ref="extendedResponse"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- extendedResponseType -->
<xs:element name="extendedResponse" type="extendedResponseType"/>
<xs:complexType name="extendedResponseType">
<xs:sequence>
<xs:element name="extensionName"
type="xs:string"
minOccurs="1"/>
<xs:any namespace="##other"
processContents="lax"
minOccurs="0" maxOccurs="unbounded" />
</xs:sequence>
</xs:complexType>
Figure 17: Structure of the extendedRequest and
extendedResponse Messages
5.3.12. optionsRequest and optionsResponse
The optionsRequest message (Figure 18) retrieves general information
about conference server capabilities. These capabilities include the
standard CCMP messages (request/response pairs) and potential
extension messages supported by the conference server. As such, it
is a basic CCMP message, rather than a specialization of the general
CCMP request.
The optionsResponse returns, in the appropriate <options> field, a
list of the supported CCMP message pairs as defined in this
specification. These messages are in the form of a list: <standard-
message-list> including each of the supported messages as reflected
by <standard-message> elements. The optionsResponse message also
allows for an <extended-message-list>, which is a list of additional
message types in the form of <extended-message-list> elements that
are currently undefined, to allow for future extensibility. The
following information is provided for both types of messages:
o <name> (REQUIRED): in case of standard messages, it can be one of
the 10 standard message names defined in this document (i.e.,
"blueprintsRequest", "confsRequest", etc.). In case of
extensions, this element MUST carry the same value of the
<extension-name> inserted in the corresponding extendedRequest/
extendedResponse message pair.
o <operations> (OPTIONAL): this field is a list of <operation>
entries, each representing the Create, Read, Update, Delete (CRUD)
operation supported by the server for the message. If this
element is absent, the client SHOULD assume the server is able to
handle the entire set of CRUD operations or, in case of standard
messages, all the operations envisioned for that message in this
document.
o <schema-ref> (OPTIONAL): since all CCMP messages can potentially
contain XML elements not envisioned in the CCMP schema (due to the
presence of <any> elements and attributes), a reference to a
proper schema definition specifying such new elements/attributes
can also be sent back to the clients by means of such field. If
this element is absent, no new elements are introduced in the
messages other than those explicitly defined in the CCMP
specification.
o <description> (OPTIONAL): human-readable information about the
related message.
The only parameter needed in the optionsRequest is the sender
confUserID, which is mirrored in the same parameter of the
corresponding optionsResponse.
The CCMP server MUST include the <standard-message-list> containing
at least one <operation> element in the optionsResponse, since a CCMP
server is REQUIRED to be able to handle both the request and response
messages for at least one of the operations.
<!-- optionsRequest -->
<xs:complexType name="ccmp-options-request-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-request-message-type"/>
</xs:complexContent>
</xs:complexType>
<!-- optionsResponse -->
<xs:complexType name="ccmp-options-response-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-response-message-type">
<xs:sequence>
<xs:element ref="optionsResponse"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- optionsResponseType -->
<xs:element name="optionsResponse"
type="optionsResponseType" />
<xs:complexType name="optionsResponseType">
<xs:sequence>
<xs:element name="options"
type="options-type" minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- options-type -->
<xs:complexType name="options-type">
<xs:sequence>
<xs:element name="standard-message-list"
type="standard-message-list-type"
minOccurs="1"/>
<xs:element name="extended-message-list"
type="extended-message-list-type"
minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- standard-message-list-type -->
<xs:complexType name="standard-message-list-type">
<xs:sequence>
<xs:element name="standard-message"
type="standard-message-type"
minOccurs="1" maxOccurs="10"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- standard-message-type -->
<xs:complexType name="standard-message-type">
<xs:sequence>
<xs:element name="name"
type="standard-message-name-type"
minOccurs="1"/>
<xs:element name="operations"
type="operations-type"
minOccurs="0"/>
<xs:element name="schema-def"
type="xs:string" minOccurs="0"/>
<xs:element name="description"
type="xs:string" minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- standard-message-name-type -->
<xs:simpleType name="standard-message-name-type">
<xs:restriction base="xs:token">
<xs:enumeration value="confsRequest"/>
<xs:enumeration value="confRequest"/>
<xs:enumeration value="blueprintsRequest"/>
<xs:enumeration value="blueprintRequest"/>
<xs:enumeration value="usersRequest"/>
<xs:enumeration value="userRequest"/>
<xs:enumeration value="sidebarsByValRequest"/>
<xs:enumeration value="sidebarByValRequest"/>
<xs:enumeration value="sidebarsByRefRequest"/>
<xs:enumeration value="sidebarByRefRequest"/>
</xs:restriction>
</xs:simpleType>
<!-- operations-type -->
<xs:complexType name="operations-type">
<xs:sequence>
<xs:element name="operation" type="operationType"
minOccurs="1" maxOccurs="4"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
Figure 18: Structure of the optionsRequest and
optionsResponse Messages
5.4. CCMP Response Codes
All CCMP response messages MUST include a <response-code>. This
document defines an IANA registry for the CCMP response codes, as
described in Section 12.5.2. The following summarizes the CCMP
response codes:
200 Success:
Successful completion of the requested operation.
400 Bad Request:
Syntactically malformed request.
401 Unauthorized:
User not allowed to perform the required operation.
403 Forbidden:
Operation not allowed (e.g., cancellation of a blueprint).
404 Object Not Found:
The target conference object does not exist at the server (The
object in the error message refers to the <confObjID> parameter in
the generic request message).
409 Conflict:
A generic error associated with all those situations in which a
requested client operation cannot be successfully completed by the
server. An example of such a situation is when the modification
of an object cannot be applied due to conflicts arising at the
server's side, e.g., because the client version of the object is
an obsolete one and the requested modifications collide with the
up-to-date state of the object stored at the server. Such code
would also be used if a client attempts to create an object
(conference or user) with an entity that already exists.
420 User Not Found:
Target user missing at the server (it is related to the XCON-
USERID in the 'entity' attribute of the <userInfo> parameter when
it is included in userRequests).
421 Invalid confUserID:
User does not exist at the server (This code is returned for
requests where the <confUserID> parameter is invalid).
422 Invalid Conference Password:
The password for the target conference object contained in the
request is wrong.
423 Conference Password Required:
"conference-password" missing in a request to access a password-
protected conference object.
424 Authentication Required:
User's authentication information is missing or invalid.
425 Forbidden Delete Parent:
Cancel operation failed since the target object is a parent of
child objects that depend on it, or because it affects, based on
the "parent-enforceable" mechanism, the corresponding element in a
child object.
426 Forbidden Change Protected:
Update refused by the server because the target element cannot be
modified due to its implicit dependence on the value of a parent
object ("parent-enforceable" mechanism).
427 Invalid Domain Name:
The domain name in an AUTO_GENERATE_X instance in the conference
object is not within the CCMP server's domain of responsibility.
500 Server Internal Error:
The server cannot complete the required service due to a system
internal error.
501 Not Implemented:
Operation defined by the protocol, but not implemented by this
server.
510 Request Timeout:
The time required to serve the request has exceeded the configured
service threshold.
511 Resources Not Available:
This code is used when the CCMP server cannot execute a command
because of resource issues, e.g., it cannot create a sub-
conference because the system has reached its limits on the number
of sub-conferences, or if a request for adding a new user fails
because the max number of users has been reached for the
conference or the max number of users has been reached for the
conferencing system.
The handling of a <response-code> of "404", "409", "420", "421",
"425", "426", or "427" is only applicable to specific operations for
specialized message responses and the details are provided in
Section 5.3. The following table summarizes these response codes and
the specialized message and operation to which they are applicable:
+----------+-------------+--------------+-------------+-------------+
| Response | Create | Retrieve | Update | Delete |
| code | | | | |
+----------+-------------+--------------+-------------+-------------+
| 404 | userRequest | All retrieve | All update | All delete |
| | sidebarBy | requests | requests | requests |
| | ValRequest, | EXCEPT: | | |
| | sidebarsBy | blueprints | | |
| | RefRequest | Request, | | |
| | | confsRequest | | |
| -------- | ----------- | ------------ | ----------- | ----------- |
| 409 | N/A | N/A | All update | N/A |
| | | | requests | |
| -------- | ----------- | ----------- | ----------- | ----------- |
| 420 | userRequest | userRequest | userRequest | userRequest |
| | (third- | | | |
| | party | | | |
| | invite with | | | |
| | third-user | | | |
| | entity) (*) | | | |
| -------- | ----------- | ----------- | ----------- | ----------- |
| 421 | All create | All retrieve | All update | All delete |
| | requests | requests | requests | requests |
| | EXCEPT: | | | |
| | userRequest | | | |
| | with no | | | |
| | confUserID | | | |
| | (**) | | | |
| -------- | ----------- | ----------- | ----------- | ----------- |
| 425 | N/A | N/A | N/A | All delete |
| | | | | request |
| -------- | ----------- | ----------- | ----------- | ----------- |
| 426 | N/A | N/A | All update | N/A |
| | | | requests | |
| -------- | ----------- | ----------- | ----------- | ----------- |
| 427 | ConfRequest | N/A | All update | N/A |
| | UserRequest | | requests | |
+----------+-------------+--------------+-------------+-------------+
Table 2: Response Codes and Associated Operations
(*) "420" in answer to a "userRequest/create" operation: In the case
of a third-party invite, this code can be returned if the
<confUserID> (contained in the 'entity' attribute of the <userInfo>
parameter) of the user to be added is unknown. In the case above, if
instead it is the <confUserID> parameter of the sender of the request
that is invalid, a <response-code> of "421" is returned to the
client.
(**) "421" is not sent in answer to userRequest/create messages
having a "null" confUserID, since this case is associated with a user
who is unaware of his own XCON-USERID, but wants to enter a known
conference.
In the case of a <response-code> of "510", a conferencing client MAY
re-attempt the request within a period of time that would be specific
to a conferencing client or conference server.
A <response-code> of "400" indicates that the conferencing client
sent a malformed request, which is indicative of an error in the
conferencing client or in the conference server. The handling is
specific to the conferencing client implementation (e.g., generate a
log, display an error message, etc.). It is NOT RECOMMENDED that the
client re-attempt the request in this case.
A <response-code> of "401" or "403" indicates the client does not
have the appropriate permissions, or there is an error in the
permissions: re-attempting the request would likely not succeed and
thus it is NOT RECOMMENDED.
Any unexpected or unknown <response-code> SHOULD be treated by the
client in the same manner as a <response-code> of "500", the handling
of which is specific to the conferencing client implementation.
6. A Complete Example of CCMP in Action
In this section a typical, non-normative, scenario in which CCMP
comes into play is described, by showing the actual composition of
the various CCMP messages. In the call flows of the example, the
conferencing client is a CCMP-enabled client, and the conference
server is a CCMP-enabled server. The XCON-USERID of the client,
Alice, is "xcon-userid:alice@example.com" and it appears in the
<confUserID> parameter in all requests. The sequence of operations
is as follows:
1. Alice retrieves the list of available blueprints from the server
(Section 6.1);
2. Alice asks for detailed information about a specific blueprint
(Section 6.2);
3. Alice decides to create a new conference by cloning the retrieved
blueprint (Section 6.3);
4. Alice modifies information (e.g., XCON-URI, name, and
description) associated with the newly created blueprint
(Section 6.4);
5. Alice specifies a list of users to be contacted when the
conference is activated (Section 6.5);
6. Alice joins the conference (Section 6.6);
7. Alice lets a new user, Ciccio, (whose XCON-USERID is
"xcon-userid:Ciccio@example.com") join the conference
(Section 6.7).
8. Alice asks for the CCMP server capabilities (Section 6.8);
9. Alice exploits an extension of the CCMP server (Section 6.9).
Note that the examples do not include any details beyond the basic
operation.
In the following sections, we deal with each of the aforementioned
actions separately.
6.1. Alice Retrieves the Available Blueprints
This section illustrates the transaction associated with retrieval of
the blueprints, together with a dump of the two messages exchanged
(blueprintsRequest and blueprintsResponse). As shown in the figure,
the blueprintsResponse message contains, in the <blueprintsInfo>
parameter, information about the available blueprints, in the form of
the standard XCON-URI of the blueprint, plus additional (and
optional) information, like its display-text and purpose.
Alice retrieves from the server the list of available blueprints:
CCMP Client CCMP Server
| |
| CCMP blueprintsRequest message |
| - confUserID: Alice |
| - confObjID: (null) |
|------------------------------------------------------>|
| |
| CCMP blueprintsResponse message |
| - confUserID: Alice |
| - confObjID: (null) |
| - response-code: 200 |
| - blueprintsInfo: bp123,bp124,.. |
|<------------------------------------------------------|
| |
. .
. .
1. blueprintsRequest message:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<ccmp:ccmpRequest
xmlns:info="urn:ietf:params:xml:ns:conference-info"
xmlns:ccmp="urn:ietf:params:xml:ns:xcon-ccmp"
xmlns:xcon="urn:ietf:params:xml:ns:xcon-conference-info">
<ccmpRequest xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:type="ccmp:ccmp-blueprints-request-message-type">
<confUserID>xcon-userid:alice@example.com</confUserID>
<ccmp:blueprintsRequest/>
</ccmpRequest>
</ccmp:ccmpRequest>
2. blueprintsResponse message from the server:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<ccmp:ccmpResponse
xmlns:xcon="urn:ietf:params:xml:ns:xcon-conference-info"
xmlns:info="urn:ietf:params:xml:ns:conference-info"
xmlns:ccmp="urn:ietf:params:xml:ns:xcon-ccmp">
<ccmpResponse
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:type="ccmp:ccmp-blueprints-response-message-type">
<confUserID>xcon-userid:alice@example.com</confUserID>
<response-code>200</response-code>
<ccmp:blueprintsResponse>
<blueprintsInfo>
<info:entry>
<info:uri>xcon:AudioRoom@example.com</info:uri>
<info:display-text>AudioRoom</info:display-text>
<info:purpose>Simple Room:
conference room with public access,
where only audio is available, more users
can talk at the same time
and the requests for the AudioFloor
are automatically accepted.
</info:purpose>
</info:entry>
<info:entry>
<info:uri>xcon:VideoRoom@example.com</info:uri>
<info:display-text>VideoRoom</info:display-text>
<info:purpose>Video Room:
conference room with public access,
where both audio and video are available,
8 users can talk and be seen at the same time,
and the floor requests are automatically accepted.
</info:purpose>
</info:entry>
<info:entry>
<info:uri>xcon:AudioConference1@example.com</info:uri>
<info:display-text>AudioConference1</info:display-text>
<info:purpose>Public Audio Conference:
conference with public access,
where only audio is available,
only one user can talk at the same time,
and the requests for the AudioFloor MUST
be accepted by a Chair.
</info:purpose>
</info:entry>
<info:entry>
<info:uri>xcon:VideoConference1@example.com</info:uri>
<info:display-text>VideoConference1</info:display-text>
<info:purpose>Public Video Conference: conference
where both audio and video are available,
only one user can talk.
</info:purpose>
</info:entry>
<info:entry>
<info:uri>xcon:AudioConference2@example.com</info:uri>
<info:display-text>AudioConference2</info:display-text>
<info:purpose>Basic Audio Conference:
conference with private access,
where only audio is available,
only one user can talk at the same time,
and the requests for the AudioFloor MUST
be accepted by a Chair.
</info:purpose>
</info:entry>
</blueprintsInfo>
</ccmp:blueprintsResponse>
</ccmpResponse>
</ccmp:ccmpResponse>
Figure 19: Getting Blueprints from the Server
6.2. Alice Gets Detailed Information about a Specific Blueprint
This section illustrates the second transaction in the overall flow.
In this case, Alice, who now knows the XCON-URIs of the blueprints
available at the server, makes a drill-down query, in the form of a
CCMP blueprintRequest message, to get detailed information about one
of them (the one called with XCON-URI "xcon:AudioRoom@example.com").
The picture shows such a transaction. Notice that the response
contains, in the <blueprintInfo> parameter, a document compliant with
the standard XCON data model.
Alice retrieves detailed information about a specified blueprint:
CCMP Client CCMP Server
| |
| CCMP blueprintRequest message |
| - confUserID: Alice |
| - confObjID: bp123 |
| - operation: retrieve |
| - blueprintInfo: (null) |
|------------------------------------------------------>|
| |
| CCMP blueprintResponse message |
| - confUserID: Alice |
| - confObjID: bp123 |
| - operation: retrieve |
| - response-code: 200 |
| - blueprintInfo: bp123Info |
|<------------------------------------------------------|
| |
. .
. .
1. blueprintRequest message:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<ccmp:ccmpRequest
xmlns:info="urn:ietf:params:xml:ns:conference-info"
xmlns:ccmp="urn:ietf:params:xml:ns:xcon-ccmp"
xmlns:xcon="urn:ietf:params:xml:ns:xcon-conference-info">
<ccmpRequest xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:type="ccmp:ccmp-blueprint-request-message-type">
<confUserID>xcon-userid:alice@example.com</confUserID>
<confObjID>xcon:AudioRoom@example.com</confObjID>
<operation>retrieve</operation>
<ccmp:blueprintRequest/>
</ccmpRequest>
</ccmp:ccmpRequest>
2. blueprintResponse message from the server:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<ccmp:ccmpResponse
xmlns:xcon="urn:ietf:params:xml:ns:xcon-conference-info"
xmlns:info="urn:ietf:params:xml:ns:conference-info"
xmlns:ccmp="urn:ietf:params:xml:ns:xcon-ccmp">
<ccmpResponse xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:type="ccmp:ccmp-blueprint-response-message-type">
<confUserID>xcon-userid:alice@example.com</confUserID>
<confObjID>xcon:AudioRoom@example.com</confObjID>
<operation>retrieve</operation>
<response-code>200</response-code>
<response-string>Success</response-string>
<ccmp:blueprintResponse>
<blueprintInfo entity="xcon:AudioRoom@example.com">
<info:conference-description>
<info:display-text>AudioRoom</info:display-text>
<info:available-media>
<info:entry label="audioLabel">
<info:display-text>audio stream</info:display-text>
<info:type>audio</info:type>
</info:entry>
</info:available-media>
</info:conference-description>
<info:users>
<xcon:join-handling>allow</xcon:join-handling>
</info:users>
<xcon:floor-information>
<xcon:floor-request-handling>confirm</xcon:floor-request-handling>
<xcon:conference-floor-policy>
<xcon:floor id="audioFloor">
<xcon:media-label>audioLabel</xcon:media-label>
</xcon:floor>
</xcon:conference-floor-policy>
</xcon:floor-information>
</blueprintInfo>
</ccmp:blueprintResponse>
</ccmpResponse>
</ccmp:ccmpResponse>
Figure 20: Getting Information about a Specific Blueprint
6.3. Alice Creates a New Conference through a Cloning Operation
This section illustrates the third transaction in the overall flow.
Alice decides to create a new conference by cloning the blueprint
having XCON-URI "xcon:AudioRoom@example.com", for which she just
retrieved detailed information through the blueprintRequest message.
This is achieved by sending a confRequest/create message having the
blueprint's URI in the <confObjID> parameter. The picture shows such
a transaction. Notice that the response contains, in the <confInfo>
parameter, the document associated with the newly created conference,
which is compliant with the standard XCON data model. The
<confObjID> parameter in the response is set to the XCON-URI of the
new conference (in this case, "xcon:8977794@example.com"). We also
notice that this value is equal to the value of the 'entity'
attribute of the <conference-info> element of the document
representing the newly created conference object.
Alice creates a new conference by cloning the
"xcon:AudioRoom@example.com" blueprint:
CCMP Client CCMP Server
| |
| CCMP confRequest message |
| - confUserID: Alice |
| - confObjID: AudioRoom |
| - operation: create |
| - confInfo: (null) |
|------------------------------------------------------>|
| |
| CCMP confResponse message |
| - confUserID: Alice |
| - confObjID: newConfId |
| - operation: create |
| - response-code: 200 |
| - version: 1 |
| - confInfo: newConfInfo |
|<------------------------------------------------------|
| |
. .
. .
1. confRequest message:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<ccmp:ccmpRequest
xmlns:info="urn:ietf:params:xml:ns:conference-info"
xmlns:ccmp="urn:ietf:params:xml:ns:xcon-ccmp"
xmlns:xcon="urn:ietf:params:xml:ns:xcon-conference-info">
<ccmpRequest
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:type="ccmp:ccmp-conf-request-message-type">
<confUserID>xcon-userid:alice@example.com</confUserID>
<confObjID>xcon:AudioRoom@example.com</confObjID>
<operation>create</operation>
<ccmp:confRequest/>
</ccmpRequest>
</ccmp:ccmpRequest>
2. confResponse message from the server:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<ccmp:ccmpResponse
xmlns:xcon="urn:ietf:params:xml:ns:xcon-conference-info"
xmlns:info="urn:ietf:params:xml:ns:conference-info"
xmlns:ccmp="urn:ietf:params:xml:ns:xcon-ccmp">
<ccmpResponse xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:type="ccmp:ccmp-conf-response-message-type">
<confUserID>xcon-userid:alice@example.com</confUserID>
<confObjID>xcon:8977794@example.com</confObjID>
<operation>create</operation>
<response-code>200</response-code>
<response-string>Success</response-string>
<version>1</version>
<ccmp:confResponse>
<confInfo entity="xcon:8977794@example.com">
<info:conference-description>
<info:display-text>
New conference by Alice cloned from AudioRoom
</info:display-text>
<info:available-media>
<info:entry label="333">
<info:display-text>audio stream</info:display-text>
<info:type>audio</info:type>
</info:entry>
</info:available-media>
</info:conference-description>
<info:users>
<xcon:join-handling>allow</xcon:join-handling>
</info:users>
<xcon:floor-information>
<xcon:floor-request-handling>confirm</xcon:floor-request-handling>
<xcon:conference-floor-policy>
<xcon:floor id="11">
<xcon:media-label>333</xcon:media-label>
</xcon:floor>
</xcon:conference-floor-policy>
</xcon:floor-information>
</confInfo>
</ccmp:confResponse>
</ccmpResponse>
</ccmp:ccmpResponse>
Figure 21: Creating a New Conference by Cloning a Blueprint
6.4. Alice Updates Conference Information
This section illustrates the fourth transaction in the overall flow.
Alice decides to modify some of the details associated with the
conference she just created. More precisely, she changes the
<display-text> element under the <conference-description> element of
the document representing the conference. This is achieved through a
confRequest/update message carrying the fragment of the conference
document to which the required changes have to be applied. As shown
in the picture, the response contains a code of "200", which
acknowledges the modifications requested by the client, while also
updating the conference version number from 1 to 2, as reflected in
the "version" parameter.
Alice updates information about the conference she just created:
CCMP Client CCMP Server
| |
| CCMP confRequest message |
| - confUserID: Alice |
| - confObjID: 8977794 |
| - operation: update |
| - confInfo: confUpdates |
|------------------------------------------------------>|
| |
| CCMP confResponse message |
| - confUserID: Alice |
| - confObjID: 8977794 |
| - operation: update |
| - response-code: 200 |
| - version: 2 |
| - confInfo: (null) |
|<------------------------------------------------------|
| |
. .
. .
1. confRequest message:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<ccmp:ccmpRequest
xmlns:info="urn:ietf:params:xml:ns:conference-info"
xmlns:ccmp="urn:ietf:params:xml:ns:xcon-ccmp"
xmlns:xcon="urn:ietf:params:xml:ns:xcon-conference-info">
<ccmpRequest
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:type="ccmp:ccmp-conf-request-message-type">
<confUserID>xcon-userid:alice@example.com</confUserID>
<confObjID>xcon:8977794@example.com</confObjID>
<operation>update</operation>
<ccmp:confRequest>
<confInfo entity="xcon:8977794@example.com">
<info:conference-description>
<info:display-text>
Alice's conference
</info:display-text>
</info:conference-description>
</confInfo>
</ccmp:confRequest>
</ccmpRequest>
</ccmp:ccmpRequest>
2. confResponse message from the server:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<ccmp:ccmpResponse
xmlns:xcon="urn:ietf:params:xml:ns:xcon-conference-info"
xmlns:info="urn:ietf:params:xml:ns:conference-info"
xmlns:ccmp="urn:ietf:params:xml:ns:xcon-ccmp">
<ccmpResponse xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:type="ccmp:ccmp-conf-response-message-type">
<confUserID>xcon-userid:alice@example.com</confUserID>
<confObjID>xcon:8977794@example.com</confObjID>
<operation>update</operation>
<response-code>200</response-code>
<response-string>Success</response-string>
<version>2</version>
<ccmp:confResponse/>
</ccmpResponse>
</ccmp:ccmpResponse>
Figure 22: Updating Conference Information
6.5. Alice Inserts a List of Users into the Conference Object
This section illustrates the fifth transaction in the overall flow.
Alice modifies the <allowed-users-list> under the <users> element in
the document associated with the conference she created. To achieve
this, she makes use of the usersRequest message provided by CCMP.
Alice updates information about the list of users to whom access to
the conference is permitted:
CCMP Client CCMP Server
| |
| CCMP usersRequest message |
| - confUserID: Alice |
| - confObjID: 8977794 |
| - operation: update |
| - usersInfo: usersUpdates |
|------------------------------------------------------>|
| |
| CCMP usersResponse message |
| - confUserID: Alice |
| - confObjID: 8977794 |
| - operation: update |
| - response-code: 200 |
| - version: 3 |
| - usersInfo: (null) |
|<------------------------------------------------------|
| |
. .
. .
1. usersRequest message:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<ccmp:ccmpRequest
xmlns:xcon="urn:ietf:params:xml:ns:xcon-conference-info"
xmlns:info="urn:ietf:params:xml:ns:conference-info"
xmlns:ccmp="urn:ietf:params:xml:ns:xcon-ccmp">
<ccmpRequest xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:type="ccmp:ccmp-users-request-message-type">
<confUserID>xcon-userid:alice@example.com</confUserID>
<confObjID>xcon:8977794@example.com</confObjID>
<operation>update</operation>
<ccmp:usersRequest>
<usersInfo>
<xcon:allowed-users-list>
<xcon:target method="dial out"
uri="xmpp:cicciolo@pippozzo.com"/>
<xcon:target method="refer"
uri="tel:+1-972-555-1234"/>
<xcon:target method="refer"
uri="sip:Carol@example.com"/>
</xcon:allowed-users-list>
</usersInfo>
</ccmp:usersRequest>
</ccmpRequest>
</ccmp:ccmpRequest>
2. usersResponse message from the server:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<ccmp:ccmpResponse
xmlns:xcon="urn:ietf:params:xml:ns:xcon-conference-info"
xmlns:info="urn:ietf:params:xml:ns:conference-info"
xmlns:ccmp="urn:ietf:params:xml:ns:xcon-ccmp">
<ccmpResponse xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:type="ccmp:ccmp-users-response-message-type">
<confUserID>xcon-userid:alice@example.com</confUserID>
<confObjID>xcon:8977794@example.com</confObjID>
<operation>retrieve</operation>
<response-code>200</response-code>
<response-string>Success</response-string>
<version>3</version>
<ccmp:usersResponse/>
</ccmpResponse>
</ccmp:ccmpResponse>
Figure 23: Updating the List of Allowed Users for the
Conference 'xcon:8977794@example.com'
6.6. Alice Joins the Conference
This section illustrates the sixth transaction in the overall flow.
Alice uses CCMP to add herself to the newly created conference. This
is achieved through a userRequest/create message containing, in the
<userInfo> parameter, a <user> element compliant with the XCON data
model representation. Notice that such an element includes
information about the user's Addresses of Record, as well as her
current endpoint. The picture below shows the transaction. Notice
how the <confUserID> parameter is equal to the 'entity' attribute of
the <userInfo> element, which indicates that the request issued by
the client is a first-party one.
Alice joins the conference by issuing a userRequest/create message
with her own ID to the server:
CCMP Client CCMP Server
| |
| CCMP userRequest message |
| - confUserID: Alice |
| - confObjID: 8977794 |
| - operation: create |
| - userInfo: AliceUserInfo |
|------------------------------------------------------>|
| |
| CCMP userResponse message |
| - confUserID: Alice |
| - confObjID: 8977794 |
| - operation: create |
| - response-code: 200 |
| - version: 4 |
| - userInfo: (null) |
|<------------------------------------------------------|
| |
. .
. .
1. userRequest message:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<ccmp:ccmpRequest
xmlns:info="urn:ietf:params:xml:ns:conference-info"
xmlns:ccmp="urn:ietf:params:xml:ns:xcon-ccmp"
xmlns:xcon="urn:ietf:params:xml:ns:xcon-conference-info">
<ccmpRequest xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:type="ccmp:ccmp-user-request-message-type">
<confUserID>xcon-userid:alice@example.com</confUserID>
<confObjID>xcon:8977794@example.com</confObjID>
<operation>create</operation>
<ccmp:userRequest>
<userInfo entity="xcon-userid:alice@example.com">
<info:associated-aors>
<info:entry>
<info:uri>
mailto:Alice83@example.com
</info:uri>
<info:display-text>email</info:display-text>
</info:entry>
</info:associated-aors>
<info:endpoint entity="sip:alice_789@example.com"/>
</userInfo>
</ccmp:userRequest>
</ccmpRequest>
</ccmp:ccmpRequest>
2. userResponse message from the server:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<ccmp:ccmpResponse
xmlns:xcon="urn:ietf:params:xml:ns:xcon-conference-info"
xmlns:info="urn:ietf:params:xml:ns:conference-info"
xmlns:ccmp="urn:ietf:params:xml:ns:xcon-ccmp">
<ccmpResponse xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:type="ccmp:ccmp-user-response-message-type">
<confUserID>xcon-userid:alice@example.com</confUserID>
<confObjID>xcon:8977794@example.com</confObjID>
<operation>create</operation>
<response-code>200</response-code>
<response-string>Success</response-string>
<version>4</version>
<ccmp:userResponse/>
</ccmpResponse>
</ccmp:ccmpResponse>
Figure 24: Alice Joins the Conference through CCMP
6.7. Alice Adds a New User to the Conference
This section illustrates the seventh and last transaction in the
overall flow. Alice uses CCMP to add a new conferencing system user,
Ciccio, to the conference. This "third-party" request is realized
through a userRequest/create message containing, in the <userInfo>
parameter, a <user> element compliant with the XCON data model
representation. Notice that such an element includes information
about Ciccio's Addresses of Record, as well as his current endpoint,
but has a placeholder 'entity' attribute,
"AUTO_GENERATE_1@example.com" as discussed in Section 4.3, since the
XCON-USERID is initially unknown to Alice. Thus, the conference
server is in charge of generating a new XCON-USERID for the user
Alice indicates (i.e., Ciccio), and returning it in the 'entity'
attribute of the <userInfo> parameter carried in the response, as
well as adding the user to the conference. The picture below shows
the transaction.
Alice adds user "Ciccio" to the conference by issuing a third-party
userRequest/create message to the server:
CCMP Client CCMP Server
| |
| CCMP userRequest message |
| - confUserID: Alice |
| - confObjID: 8977794 |
| - operation: create |
| - userInfo: dummyUserID, CiccioUserInfo |
|------------------------------------------------------>|
| |
| CCMP optionsResponse message |
| - confUserID: Alice |
| - confObjID: 8977794 |
| - operation: create |
| - response-code: 200 |
| - version: 5 |
| - userInfo: userIDCiccio, |
| CiccioUserInfo |
| |
|<------------------------------------------------------|
| |
. .
. .
1. "third-party" userRequest message from Alice:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<ccmp:ccmpRequest
xmlns:info="urn:ietf:params:xml:ns:conference-info"
xmlns:ccmp="urn:ietf:params:xml:ns:xcon-ccmp"
xmlns:xcon="urn:ietf:params:xml:ns:xcon-conference-info">
<ccmpRequest xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:type="ccmp:ccmp-user-request-message-type">
<confUserID>xcon-userid:alice@example.com</confUserID>
<confObjID>xcon:8977794@example.com</confObjID>
<operation>create</operation>
<ccmp:userRequest>
<userInfo entity="xcon-userid:AUTO_GENERATE_1@example.com">
<info:associated-aors>
<info:entry>
<info:uri>
mailto:Ciccio@example.com
</info:uri>
<info:display-text>email</info:display-text>
</info:entry>
</info:associated-aors>
<info:endpoint entity="sip:Ciccio@example.com"/>
</userInfo>
</ccmp:userRequest>
</ccmpRequest>
</ccmp:ccmpRequest>
2. "third-party" userResponse message from the server:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<ccmp:ccmpResponse
xmlns:info="urn:ietf:params:xml:ns:conference-info"
xmlns:ccmp="urn:ietf:params:xml:ns:xcon-ccmp"
xmlns:xcon="urn:ietf:params:xml:ns:xcon-conference-info">
<ccmpResponse xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:type="ccmp:ccmp-user-response-message-type">
<confUserID>xcon-userid:alice@example.com</confUserID>
<confObjID>xcon:8977794@example.com</confObjID>
<operation>create</operation>
<response-code>200</response-code>
<version>5</version>
<ccmp:userResponse>
<userInfo entity="xcon-userid:Ciccio@example.com">
<info:associated-aors>
<info:entry>
<info:uri>
mailto:Ciccio@example.com
</info:uri>
<info:display-text>email</info:display-text>
</info:entry>
</info:associated-aors>
<info:endpoint entity="sip:Ciccio@example.com"/>
</userInfo>
</ccmp:userResponse>
</ccmpResponse>
</ccmp:ccmpResponse>
Figure 25: Alice Adds a New User to the Conference through CCMP
6.8. Alice Asks for the CCMP Server Capabilities
This section illustrates how Alice can discover which standard CCMP
messages and what extensions are supported by the CCMP server with
which she interacts through an optionsRequest/optionsResponse
transaction.
To prepare the optionsRequest, Alice just puts her XCON-USERID in the
<confUserID> parameter. Looking at the <options> element in the
received optionsResponse, Alice infers the following server
capabilities as regards standard CCMP messages:
o the server doesn't support sidebarsByValRequest nor the
sidebarByValRequest messages, since they do not appear in the
<standard-message-list>;
o the only implemented operation for the blueprintRequest message is
"retrieve", since no other <operation> entries are included in the
related <operations> field.
By analyzing the <extended-message-list>, Alice discovers the server
implements a bluePrint extension, referred to as "confSummaryRequest"
in this example. This extension allows Alice to recover via CCMP a
brief description of a specific conference; the XML elements involved
in this extended conference control transaction are available at the
URL indicated in the <schema-ref> element, and the only operation
provided by this extension is "retrieve". To better understand how
Alice can exploit the "confSummaryRequest" extension via CCMP, see
Section 6.9.
The figure below shows the optionsRequest/optionsResponse message
exchange between Alice and the CCMP server.
CCMP Client CCMP Server
| |
| CCMP optionsRequest message |
| - confUserID: Alice |
|------------------------------------------------------>|
| |
| CCMP userResponse message |
| - confUserID: Alice |
| - response-code: 200 |
| - options (list of both |
| standard and extended |
| supported messages) |
|<------------------------------------------------------|
| |
. .
. .
1. optionsRequest (Alice asks for CCMP server capabilities)
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<ccmp:ccmpRequest
xmlns:info="urn:ietf:params:xml:ns:conference-info"
xmlns:ccmp="urn:ietf:params:xml:ns:xcon-ccmp"
xmlns:xcon="urn:ietf:params:xml:ns:xcon-conference-info">
<ccmpRequest xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:type="ccmp:ccmp-options-request-message-type">
<confUserID>xcon-userid:alice@example.com</confUserID>
</ccmpRequest>
</ccmp:ccmpRequest>
2. optionsResponse (the server returns the list of its conference
control capabilities)
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<ccmp:ccmpResponse
xmlns:info="urn:ietf:params:xml:ns:conference-info"
xmlns:ccmp="urn:ietf:params:xml:ns:xcon-ccmp"
xmlns:xcon="urn:ietf:params:xml:ns:xcon-conference-info">
<ccmpResponse xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:type="ccmp:ccmp-options-response-message-type">
<confUserID>xcon-userid:alice@example.com</confUserID>
<response-code>200</response-code>
<response-string>success</response-string>
<ccmp:optionsResponse>
<options>
<standard-message-list>
<standard-message>
<name>blueprintsRequest</name>
</standard-message>
<standard-message>
<name>blueprintRequest</name>
<operations>
<operation>retrieve</operation>
</operations>
</standard-message>
<standard-message>
<name>confsRequest</name>
</standard-message>
<standard-message>
<name>confRequest</name>
</standard-message>
<standard-message>
<name>usersRequest</name>
</standard-message>
<standard-message>
<name>userRequest</name>
</standard-message>
<standard-message>
<name>sidebarsByRefRequest</name>
</standard-message>
<standard-message>
<name>sidebarByRefRequest</name>
</standard-message>
</standard-message-list>
<extended-message-list>
<extended-message>
<name>confSummaryRequest</name>
<operations>
<operation>retrieve</operation>
</operations>
<schema-def>
http://example.com/ccmp-extension-schema.xsd
</schema-def>
<description>
confSummaryRequest is intended
to allow the requestor to retrieve
a brief description
of the conference indicated in the
confObjID request parameter
</description>
</extended-message>
</extended-message-list>
</options>
</ccmp:optionsResponse>
</ccmpResponse>
</ccmp:ccmpResponse>
Figure 26: Alice Asks for the Server Control Capabilities
6.9. Alice Makes Use of a CCMP Server Extension
In this section, a very simple example of CCMP extension support is
provided. Alice can recover information about this and other server-
supported extensions by issuing an optionsRequest (see Section 6.8).
The extension in question is named "confSummaryRequest" and allows a
CCMP client to obtain from the CCMP server synthetic information
about a specific conference. The conference summary is carried in
the form of an XML element as follows:
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema"
targetNamespace="http://example.com/ccmp-extension"
xmlns="http://example.com/ccmp-extension">
<xs:element name="confSummary" type="conf-summary-type"/>
<xs:complexType name="conf-summary-type">
<xs:sequence>
<xs:element name="title" type="xs:string"/>
<xs:element name="status" type="xs:string"/>
<xs:element name="public" type="xs:boolean"/>
<xs:element name="media" type="xs:string"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
Figure 27: Example of XML Schema defining an extension
parameter (ccmp-extension-schema.xsd)
As can be inferred from the schema file, the <confSummary> element
contains conference information related to the following:
o title
o status (active or registered)
o participation modality (if everyone is allowed to participate, the
boolean <public> element is set to "true")
o involved media
In order to retrieve a conference summary related to the conference
she participates in, Alice sends to the CCMP server an
extendedRequest with a "confSummaryRequest" <extensionName>,
specifying the conference XCON-URI in the confObjID request
parameter, as depicted in the figure below.
CCMP Client CCMP Server
| |
| CCMP extendedRequest message |
| - confUserID: Alice |
| - confObjID: 8977794 |
| - operation: retrieve |
| - extensionName: confSummaryRequest |
|------------------------------------------------------>|
| |
| CCMP extendedResponse message |
| - confUserID: Alice |
| - confObjID: 8977794 |
| - operation: retrieve |
| - response-code: 200 |
| - extensionName: |
| confSummaryRequest |
| - confSummary |
|<------------------------------------------------------|
| |
. .
. .
1. extendedRequest (Alice makes use of the "confSummaryRequest")
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<ccmp:ccmpRequest xmlns:info="urn:ietf:params:xml:ns:conference-info"
xmlns:ccmp="urn:ietf:params:xml:ns:xcon-ccmp"
xmlns:xcon="urn:ietf:params:xml:ns:xcon-conference-info"
xmlns:example="http://example.com/ccmp-extension">
<ccmpRequest xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:type="ccmp:ccmp-extended-request-message-type">
<confUserID>xcon-userid:alice@example.com</confUserID>
<confObjID>xcon:8977794@example.com</confObjID>
<operation>retrieve</operation>
<ccmp:extendedRequest>
<extensionName>confRequestSummary</extensionName>
</ccmp:extendedRequest>
</ccmpRequest>
</ccmp:ccmpRequest>
2. extendedResponse (the server provides Alice with a brief description
of the desired conference)
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<ccmp:ccmpResponse xmlns:info="urn:ietf:params:xml:ns:conference-info"
xmlns:ccmp="urn:ietf:params:xml:ns:xcon-ccmp"
xmlns:xcon="urn:ietf:params:xml:ns:xcon-conference-info"
xmlns:example="http://example.com/ccmp-extension">
<ccmpResponse xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:type="ccmp:ccmp-extended-response-message-type">
<confUserID>xcon-userid:alice@example.com</confUserID>
<confObjID>xcon:8977794@example.com</confObjID>
<operation>retrieve</operation>
<response-code>200</response-code>
<response-string>success</response-string>
<ccmp:extendedResponse>
<extensionName>confSummaryRequest</extensionName>
<example:confSummary>
<title> Alice's conference </title>
<status> active </status>
<public> true </public>
<media> audio </media>
</example:confSummary>
</ccmp:extendedResponse>
</ccmpResponse>
</ccmp:ccmpResponse>
Figure 28: Alice Exploits the 'confSummaryRequest' Extension
7. Locating a Conference Server
If a conferencing client is not pre-configured to use a specific
conference server for the requests, the client MUST first discover
the conference server before it can send any requests. The result of
the discovery process, is the address of the server supporting
conferencing. In this document, the result is an http: or https:
URI, which identifies a conference server.
DNS is RECOMMENDED to be used to locate a conference server in the
case that the client is not pre-configured to use a specific
conference server. URI-Enabled NAPTR (U-NAPTR) resolution for
conferencing takes a domain name as input and produces a URI that
identifies the conference server. This process also requires an
Application Service tag and an Application Protocol tag, which
differentiate conferencing-related NAPTR records from other records
for that domain.
Section 12.4.1 defines an Application Service tag of "XCON", which is
used to identify the centralized conferencing (XCON) server for a
particular domain. The Application Protocol tag "CCMP", defined in
Section 12.4.2, is used to identify an XCON server that understands
CCMP.
The NAPTR records in the following example (Figure 29) demonstrate
the use of the Application Service and Application Protocol tags.
Iterative NAPTR resolution is used to delegate responsibility for the
conferencing service from "zonea.example.com." and
"zoneb.example.com." to "outsource.example.com.".
zonea.example.com.
;; order pref flags
IN NAPTR 100 10 "" "XCON-CCMP" ( ; service
"" ; regex
outsource.example.com. ; replacement
)
zoneb.example.com.
;; order pref flags
IN NAPTR 100 10 "" "XCON-CCMP" ( ; service
"" ; regex
outsource.example.com. ; replacement
)
outsource.example.com.
;; order pref flags
IN NAPTR 100 10 "u" "XCON-CCMP" ( ; service
"!*.!https://confs.example.com/!" ; regex
. ; replacement
)
Figure 29: Sample XCON-CCMP Service NAPTR Records
Details for the "XCON" Application Service tag and the "CCMP"
Application Protocol tag are included in Section 12.4.
8. Managing Notifications
As per [RFC5239], CCMP is one of the following four protocols, which
have been formally identified within the XCON framework:
Conference Control Protocol:
mediates between conference and media control client (conferencing
client) and conference server. This document describes such a
protocol.
Binary floor Control Protocol:
operates between the floor control client and the floor control
server. An example of such a protocol is the Binary Floor Control
Protocol (BFCP), specified in [RFC4582].
Call Signaling Protocol:
operates between the Call Signaling Client and the focus.
Examples of call signaling protocols include SIP, H.323 and IAX.
Such protocols are capable of negotiating a conferencing session.
Notification Protocol:
operates between the Notification Client and the XCON Notification
Service. This specification does not define a new notification
protocol. For clients that use SIP as the call signaling
protocol, the XCON event package [RFC6502] MUST be used by the
client for notifications of changes in the conference data as
described below.
The protocol specified in this document is a proactive one and is
used by a conferencing client to send requests to a conference server
in order to retrieve information about the conference objects stored
by the server and to possibly manipulate them. However, a complete
conferencing solution is not prohibited from providing clients with a
means for receiving asynchronous updates about the status of the
objects available at the server. The notification protocol, while
conceptually independent of all the mentioned companion protocols,
can nonetheless be chosen in a way that is consistent with the
overall protocol architecture characterizing a specific deployment,
as discussed in the following.
When the conferencing control client uses SIP [RFC3261] as the
signaling protocol to participate in the conference, SIP event
notification can be used. In such a case, the conferencing control
client MUST implement the conference event package for XCON
[RFC6502]. This is the default mechanism for conferencing clients as
is SIP for signaling per the XCON framework [RFC5239].
In the case where the interface to the conference server is entirely
web based, there is a common mechanism for web-based systems that
could be used -- a "call back". With this mechanism, the
conferencing client provides the conference server with an HTTP URL
that is invoked when a change occurs. This is a common
implementation mechanism for e-commerce. This works well in the
scenarios whereby the conferencing client is a web server that
provides the graphical HTML user interface and uses CCMP as the back-
end interface to the conference server. This model can coexist with
the SIP event notification model. PC-based clients behind NATs could
provide a SIP event URI, whereas web-based clients using CCMP in the
back end would probably find the HTTP call back approach much easier.
The details of this approach are out of scope for CCMP; thus, we
expect a future specification will document this solution.
9. HTTP Transport
This section describes the use of HTTP [RFC2616] and HTTP over TLS
[RFC2818] as transport mechanisms for CCMP, which a conforming
conference server and conferencing client MUST support.
Although CCMP uses HTTP as a transport, it uses a strict subset of
HTTP features, and due to the restrictions of some features, a
conferencing server might not be a fully compliant HTTP server. It
is intended that a conference server can easily be built using an
HTTP server with extensibility mechanisms, and that a conferencing
client can trivially use existing HTTP libraries. This subset of
requirements helps implementers avoid ambiguity with the many options
the full HTTP protocol offers.
Support of HTTP authentication [RFC2617] and cookies [RFC6265] is
OPTIONAL for a conferencing client that conforms to this
specification. These mechanisms are unnecessary because CCMP
requests carry their own authentication information (in the "subject"
field; see Section 5.1). A conferencing client SHOULD include
support for HTTP proxy authentication.
A CCMP request is carried in the body of an HTTP POST request. The
conferencing client MUST include a Host header in the request.
The MIME type of CCMP request and response bodies is "application/
ccmp+xml". The conference server and conferencing client MUST
provide this value in the HTTP Content-Type and Accept header fields.
If the conference server does not receive the appropriate Content-
Type and Accept header fields, the conference server SHOULD fail the
request, returning a 406 (Not Acceptable) response. CCMP responses
SHOULD include a Content-Length header.
Conferencing clients MUST NOT use the Expect header or the Range
header in CCMP requests. The conference server MAY return 501 (Not
Implemented) errors if either of these HTTP features are used. In
the case that the conference server receives a request from the
conferencing client containing an If-* (conditional) header, the
conference server SHOULD return a 412 (precondition failed) response.
The POST method is the only method REQUIRED for CCMP. If a
conference server chooses to support GET or HEAD, it SHOULD consider
the kind of application doing the GET. Since a conferencing client
only uses a POST method, the GET or HEAD MUST be either a URL that
was found outside its normal context (e.g., somebody found a URL in
protocol traces or log files and fed it into their browser) or
somebody is testing or debugging a system. The conference server
could provide information in the CCMP response indicating that the
URL corresponds to a conference server and only responds to CCMP POST
requests or the conference server could instead try to avoid any leak
of information by returning a very generic HTTP error message such as
405 (Method Not Allowed).
The conference server populates the HTTP headers of responses so that
they are consistent with the contents of the message. In particular,
the CacheControl header SHOULD be set to disable caching of any
conference information by HTTP intermediaries. Otherwise, there is
the risk of stale information and/or the unauthorized disclosure of
the information. The HTTP status code MUST indicate a 2xx series
response for all CCMP Response and Error messages.
The conference server MAY redirect a CCMP request. A conference
server MUST NOT include CCMP responses in a 3xx response. A
conferencing client MUST handle redirects by using the Location
header provided by the server in a 3xx response. When redirecting,
the conferencing client MUST observe the delay indicated by the
Retry-After header. The conferencing client MUST authenticate the
server that returns the redirect response before following the
redirect. A conferencing client SHOULD authenticate the conference
server indicated in a redirect.
The conference server SHOULD support persistent connections and
request pipelining. If pipelining is not supported, the conference
server MUST NOT allow persistent connections. The conference server
MUST support termination of a response by the closing of a
connection.
Implementations of CCMP that implement HTTP transport MUST implement
transport over TLS [RFC2818]. TLS provides message integrity and
confidentiality between the conferencing client and the conference
server. The conferencing client MUST implement the server
authentication method described in HTTPS [RFC2818]. The device uses
the URI obtained during conference server discovery to authenticate
the server. The details of this authentication method are provided
in Section 3.1 of HTTPS [RFC2818]. When TLS is used, the
conferencing client SHOULD fail a request if server authentication
fails.
10. Security Considerations
As identified in the XCON framework [RFC5239], there are a wide
variety of potential attacks related to conferencing, due to the
natural involvement of multiple endpoints and the capability to
manipulate the data on the conference server using CCMP. Examples of
attacks include the following: an endpoint attempting to listen to
conferences in which it is not authorized to participate, an endpoint
attempting to disconnect or mute other users, and an endpoint theft
of service in attempting to create conferences it is not allowed to
create.
The following summarizes the security considerations for CCMP:
1. The client MUST determine the proper conference server. The
conference server discovery is described in Section 7.
2. The client MUST connect to the proper conference server. The
mechanisms for addressing this security consideration are
described in Section 10.1.
3. The protocol MUST support a confidentiality and integrity
mechanism. As described in Section 9, implementations of CCMP
MUST implement the HTTP transport over TLS [RFC2818].
4. There are security issues associated with the authorization to
perform actions on the conferencing system to invoke specific
capabilities. A conference server SHOULD ensure that only
authorized entities can manipulate the conference data. The
mechanisms for addressing this security consideration are
described in Section 10.2.
5. The privacy and security of the identity of a user in the
conference MUST be assured. The mechanisms to ensure the
security and privacy of identity are discussed in Section 10.3.
6. A final issue is related to Denial-of-Service (DoS) attacks on
the conference server itself. The recommendations to minimize
the potential and impact of DoS attacks are discussed in
Section 10.4.
Of the considerations listed above, items 1 and 3 are addressed
within the referenced sections earlier in this document. The
remaining security considerations are addressed in detail in the
following sections.
10.1. Assuring That the Proper Conference Server Has Been Contacted
Section 7 describes a mechanism using DNS by which a conferencing
client discovers a conference server. A primary concern is spoofed
DNS replies; thus, the use of DNS Security (DNSSEC) is RECOMMENDED to
ensure that the client receives a valid response from the DNS server
in cases where this is a concern.
When the CCMP transaction is conducted using TLS [RFC5246], the
conference server can authenticate its identity, either as a domain
name or as an IP address, to the conferencing client by presenting a
certificate containing that identifier as a subjectAltName (i.e., as
an iPAddress or dNSName, respectively). Any implementation of CCMP
MUST be capable of being transacted over TLS so that the client can
request the above authentication. Note that, in order for the
presented certificate to be valid at the client, the client MUST be
able to validate the certificate following the procedures in
[RFC2818] in the case of HTTP as a transport. In particular, the
validation path of the certificate must end in one of the client's
trust anchors, even if that trust anchor is the conference server
certificate itself. If the client has external information as to the
expected identity or credentials of the proper conference server, the
authentication checks described above MAY be omitted.
10.2. User Authentication and Authorization
Many policy authorization decisions are based on the identity of the
user or the role that a user may have. The conference server MUST
implement mechanisms for authentication of users to validate their
identity. There are several ways that a user might authenticate its
identity to the system. For users joining a conference using one of
the call signaling protocols, the user authentication mechanisms for
the specific protocol can be used. For example, in the case of a
user joining the conference using SIP signaling, the user
authentication as defined in [RFC3261] MUST be used. For the case of
users joining the conference using CCMP, the CCMP Request messages
provide a subject field that contains a username and password, which
can be used for authentication. Since the CCMP messages are
RECOMMENDED to be carried over TLS, this information can be sent
securely.
The XCON framework [RFC5239] provides an overview of other
authorization mechanisms. In the cases where a user is authorized
via multiple mechanisms, it is RECOMMENDED that the conference server
associate the authorization of the CCMP interface with other
authorization mechanisms; for example, Public Switched Telephone
Network (PSTN) users that join with a PIN and control the conference
using CCMP. When a conference server presents the identity of
authorized users, it MAY provide information about the way the
identity was proven or verified by the system. A conference server
can also allow a completely unauthenticated user into the system --
this information SHOULD also be communicated to interested parties.
Once a user is authenticated and authorized through the various
mechanisms available on the conference server, the conference server
MUST allocate a conference user identifier (XCON-USERID) and SHOULD
associate the XCON-USERID with any signaling specific user
identifiers that were used for authentication and authorization.
This XCON-USERID can be provided to a specific user through the
conference notification interface and MUST be provided to users that
interact with the conferencing system using CCMP (i.e., in the
appropriate CCMP response messages). The XCON-USERIDs for each user/
participant in the conference are contained in the 'entity' attribute
in the <user> element in the conference object. The XCON-USERID is
REQUIRED for any subsequent operations by the user on the conference
object and is carried in the confUserID parameter in the CCMP
requests and responses.
Note that the policy management of an XCON-compliant conferencing
system is out of the scope of this document, as well as of the XCON
working group (WG). However, the specification of a policy
management framework is realizable with the overall XCON
architecture, in particular with regard to a Role-Based Access
Control (RBAC) approach. In RBAC, the following elements are
identified: (i) Users; (ii) Roles; (iii) Objects; (iv) Operations;
(v) Permissions. For all of the above elements, a direct mapping
exists onto the main XCON entities. As an example, RBAC objects map
onto XCON data model objects and RBAC operations map onto CCMP
operations.
Future documents can define an RBAC framework for XCON, by first
focusing on the definition of roles and then specifying the needed
permission policy sets and role policy sets (used to associate policy
permission sets with specific roles). With these policies in place,
access to a conference object compliant with the XCON data model can
be appropriately controlled. As far as assigning users to roles, the
Users in the RBAC model relate directly to the <users> element in the
conference object. The <users> element is comprised of <user>
elements representing a specific user in the conferencing system.
Each <user> element contains an 'entity' attribute with the XCON-
USERID and a <role> element. Thus, each authorized user (as
represented by an XCON-USERID) can be associated with a <role>
element.
10.3. Security and Privacy of Identity
An overview of the required privacy and anonymity for users of a
conferencing system are provided in the XCON framework [RFC5239].
The security of the identity in the form of the XCON-USERID is
provided in CCMP through the use of TLS.
The conference server SHOULD support the mechanism to ensure the
privacy of the XCON-USERID. The conferencing client indicates the
desired level of privacy by manipulation of the <provide-anonymity>
element defined in the XCON data model [RFC6501]. The <provide-
anonymity> element controls the degree to which a user reveals their
identity. The following summarizes the values for the <provide-
anonymity> element that the client includes in their requests:
"hidden": Ensures that other participants are not aware that there
is an additional participant (i.e., the user issuing the request)
in the conference. This could be used in cases of users that are
authorized with a special role in a conference (e.g., a supervisor
in a call center environment).
"anonymous": Ensures that other participants are aware that there
is another participant (i.e., the user issuing the request);
however, the other participants are not provided information as to
the identity of the user.
"semi-private": Ensures that the user's identity is only to be
revealed to other participants or users that have a higher-level
authorization (e.g., a conferencing system can be configured such
that a human administrator can see all users).
If the client desires privacy, the conferencing client SHOULD include
the <provide-anonymity> element in the <confInfo> parameter in a CCMP
confRequest message with an <operation> parameter of "update" or
"create" or in the <userInfo> parameter in a CCMP userRequest message
with an <operation> parameter of "update" or "create". If the
<provide-anonymity> element is not included in the conference object,
then other users can see the participant's identity. Participants
are made aware of other participants that are "anonymous" or "semi-
private" when they perform subsequent operations on the conference
object or retrieve the conference object or when they receive
subsequent notifications.
Note that independent of the level of anonymity requested by the
user, the identity of the user is always known by the conferencing
system as that is required to perform the necessary authorization as
described in Section 10.2. The degree to which human administrators
can see the information can be controlled using policies (e.g., some
information in the data model can be hidden from human
administrators).
10.4. Mitigating DoS Attacks
[RFC4732] provides an overview of possible DoS attacks. In order to
minimize the potential for DoS attacks, it is RECOMMENDED that
conferencing systems require user authentication and authorization
for any client participating in a conference. This can be
accomplished through the use of the mechanisms described in
Section 10.2, as well as by using the security mechanisms associated
with the specific signaling (e.g., Session Initiation Protocol Secure
(SIPS)) and media protocols (e.g., Secure Realtime Transport Protocol
(SRTP)). In addition, Section 4.4 describes the use of a timer
mechanism to alleviate the situation whereby CCMP messages pend
indefinitely, thus increasing the potential that pending requests
continue to increase when is a server is receiving more requests than
it can process.
11. XML Schema
This section gives the XML schema definition
[W3C.REC-xmlschema-1-20041028] [W3C.REC-xmlschema-2-20041028] of the
"application/ccmp+xml" format. This is presented as a formal
definition of the "application/ccmp+xml" format. A new XML
namespace, a new XML schema, and the MIME type for this schema are
registered with IANA as described in Section 12. Note that this XML
Schema Definition is not intended to be used with on-the-fly
validation of the presence XML document. Whitespaces are included in
the schema to conform to the line length restrictions of the RFC
format without having a negative impact on the readability of the
document. Any conforming processor should remove leading and
trailing white spaces.
<?xml version="1.0" encoding="utf-8"?>
<xs:schema
targetNamespace="urn:ietf:params:xml:ns:xcon-ccmp"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns="urn:ietf:params:xml:ns:xcon-ccmp"
xmlns:tns="urn:ietf:params:xml:ns:xcon-ccmp"
xmlns:dm="urn:ietf:params:xml:ns:xcon-conference-info"
xmlns:info="urn:ietf:params:xml:ns:conference-info"
xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import namespace="urn:ietf:params:xml:ns:xcon-conference-info"
schemaLocation="DataModel.xsd"/>
<xs:import namespace="urn:ietf:params:xml:ns:conference-info"
schemaLocation="rfc4575.xsd"/>
<xs:element name="ccmpRequest" type="ccmp-request-type" />
<xs:element name="ccmpResponse" type="ccmp-response-type" />
<!-- CCMP request definition -->
<xs:complexType name="ccmp-request-type">
<xs:sequence>
<xs:element name="ccmpRequest"
type="ccmp-request-message-type" />
</xs:sequence>
</xs:complexType>
<!-- ccmp-request-message-type -->
<xs:complexType abstract="true"
name="ccmp-request-message-type">
<xs:sequence>
<xs:element name="subject" type="subject-type"
minOccurs="0" maxOccurs="1" />
<xs:element name="confUserID" type="xs:string"
minOccurs="0" maxOccurs="1" />
<xs:element name="confObjID" type="xs:string"
minOccurs="0" maxOccurs="1" />
<xs:element name="operation" type="operationType"
minOccurs="0" maxOccurs="1" />
<xs:element name="conference-password" type="xs:string"
minOccurs="0" maxOccurs="1" />
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- CCMP response definition -->
<xs:complexType name="ccmp-response-type">
<xs:sequence>
<xs:element name="ccmpResponse"
type="ccmp-response-message-type" />
</xs:sequence>
</xs:complexType>
<!-- ccmp-response-message-type -->
<xs:complexType abstract="true" name="ccmp-response-message-type">
<xs:sequence>
<xs:element name="confUserID" type="xs:string"
minOccurs="1" maxOccurs="1" />
<xs:element name="confObjID" type="xs:string"
minOccurs="0" maxOccurs="1" />
<xs:element name="operation" type="operationType"
minOccurs="0"
maxOccurs="1" />
<xs:element name="response-code"
type="response-codeType"
minOccurs="1" maxOccurs="1" />
<xs:element name="response-string" type="xs:string"
minOccurs="0" maxOccurs="1" />
<xs:element name="version" type="xs:positiveInteger"
minOccurs="0" maxOccurs="1" />
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- CCMP REQUESTS -->
<!-- blueprintsRequest -->
<xs:complexType name="ccmp-blueprints-request-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-request-message-type">
<xs:sequence>
<xs:element ref="blueprintsRequest" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- blueprintsRequestType -->
<xs:element name="blueprintsRequest" type="blueprintsRequestType"/>
<xs:complexType name="blueprintsRequestType">
<xs:sequence>
<xs:element name="xpathFilter" type="xs:string"
minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- blueprintRequest -->
<xs:complexType name="ccmp-blueprint-request-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-request-message-type">
<xs:sequence>
<xs:element ref="blueprintRequest" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- blueprintRequestType -->
<xs:element name="blueprintRequest" type="blueprintRequestType" />
<xs:complexType name="blueprintRequestType">
<xs:sequence>
<xs:element name="blueprintInfo"
type="info:conference-type" minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- confsRequest -->
<xs:complexType name="ccmp-confs-request-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-request-message-type">
<xs:sequence>
<xs:element ref="confsRequest" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- confsRequestType -->
<xs:element name="confsRequest" type="confsRequestType" />
<xs:complexType name="confsRequestType">
<xs:sequence>
<xs:element name="xpathFilter" type="xs:string"
minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- confRequest -->
<xs:complexType name="ccmp-conf-request-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-request-message-type">
<xs:sequence>
<xs:element ref="confRequest" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- confRequestType -->
<xs:element name="confRequest" type="confRequestType" />
<xs:complexType name="confRequestType">
<xs:sequence>
<xs:element name="confInfo" type="info:conference-type"
minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- usersRequest -->
<xs:complexType name="ccmp-users-request-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-request-message-type">
<xs:sequence>
<xs:element ref="usersRequest" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- usersRequestType -->
<xs:element name="usersRequest" type="usersRequestType" />
<xs:complexType name="usersRequestType">
<xs:sequence>
<xs:element name="usersInfo" type="info:users-type"
minOccurs="0" />
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- userRequest -->
<xs:complexType name="ccmp-user-request-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-request-message-type">
<xs:sequence>
<xs:element ref="userRequest" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- userRequestType -->
<xs:element name="userRequest" type="userRequestType" />
<xs:complexType name="userRequestType">
<xs:sequence>
<xs:element name="userInfo" type="info:user-type"
minOccurs="0" />
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- sidebarsByValRequest -->
<xs:complexType name="ccmp-sidebarsByVal-request-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-request-message-type">
<xs:sequence>
<xs:element ref="sidebarsByValRequest" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- sidebarsByValRequestType -->
<xs:element name="sidebarsByValRequest"
type="sidebarsByValRequestType" />
<xs:complexType name="sidebarsByValRequestType">
<xs:sequence>
<xs:element name="xpathFilter"
type="xs:string" minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- sidebarsByRefRequest -->
<xs:complexType name="ccmp-sidebarsByRef-request-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-request-message-type">
<xs:sequence>
<xs:element ref="sidebarsByRefRequest" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- sidebarsByRefRequestType -->
<xs:element name="sidebarsByRefRequest"
type="sidebarsByRefRequestType" />
<xs:complexType name="sidebarsByRefRequestType">
<xs:sequence>
<xs:element name="xpathFilter" type="xs:string"
minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- sidebarByValRequest -->
<xs:complexType name="ccmp-sidebarByVal-request-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-request-message-type">
<xs:sequence>
<xs:element ref="sidebarByValRequest" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- sidebarByValRequestType -->
<xs:element name="sidebarByValRequest"
type="sidebarByValRequestType"/>
<xs:complexType name="sidebarByValRequestType">
<xs:sequence>
<xs:element name="sidebarByValInfo"
type="info:conference-type" minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- sidebarByRefRequest -->
<xs:complexType name="ccmp-sidebarByRef-request-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-request-message-type">
<xs:sequence>
<xs:element ref="sidebarByRefRequest" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- sidebarByRefRequestType -->
<xs:element name="sidebarByRefRequest"
type="sidebarByRefRequestType" />
<xs:complexType name="sidebarByRefRequestType">
<xs:sequence>
<xs:element name="sidebarByRefInfo"
type="info:conference-type" minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- extendedRequest -->
<xs:complexType name="ccmp-extended-request-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-request-message-type">
<xs:sequence>
<xs:element ref="extendedRequest"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- extendedRequestType -->
<xs:element name="extendedRequest" type="extendedRequestType"/>
<xs:complexType name="extendedRequestType">
<xs:sequence>
<xs:element name="extensionName"
type="xs:string" minOccurs="1"/>
<xs:any namespace="##other" processContents="lax" minOccurs="0"
maxOccurs="unbounded" />
</xs:sequence>
</xs:complexType>
<!-- optionsRequest -->
<xs:complexType name="ccmp-options-request-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-request-message-type">
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- CCMP RESPONSES -->
<!-- blueprintsResponse -->
<xs:complexType name="ccmp-blueprints-response-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-response-message-type">
<xs:sequence>
<xs:element ref="blueprintsResponse" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- blueprintsResponseType -->
<xs:element name="blueprintsResponse" type="blueprintsResponseType"/>
<xs:complexType name="blueprintsResponseType">
<xs:sequence>
<xs:element name="blueprintsInfo" type="info:uris-type"
minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- blueprintResponse -->
<xs:complexType name="ccmp-blueprint-response-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-response-message-type">
<xs:sequence>
<xs:element ref="blueprintResponse" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- blueprintResponseType -->
<xs:element name="blueprintResponse" type="blueprintResponseType"/>
<xs:complexType name="blueprintResponseType">
<xs:sequence>
<xs:element name="blueprintInfo" type="info:conference-type"
minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- confsResponse -->
<xs:complexType name="ccmp-confs-response-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-response-message-type">
<xs:sequence>
<xs:element ref="confsResponse" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- confsResponseType -->
<xs:element name="confsResponse" type="confsResponseType" />
<xs:complexType name="confsResponseType">
<xs:sequence>
<xs:element name="confsInfo" type="info:uris-type"
minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- confResponse -->
<xs:complexType name="ccmp-conf-response-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-response-message-type">
<xs:sequence>
<xs:element ref="confResponse"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- confResponseType -->
<xs:element name="confResponse" type="confResponseType" />
<xs:complexType name="confResponseType">
<xs:sequence>
<xs:element name="confInfo" type="info:conference-type"
minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- usersResponse -->
<xs:complexType name="ccmp-users-response-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-response-message-type">
<xs:sequence>
<xs:element ref="usersResponse" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- usersResponseType -->
<xs:element name="usersResponse" type="usersResponseType" />
<xs:complexType name="usersResponseType">
<xs:sequence>
<xs:element name="usersInfo" type="info:users-type"
minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- userResponse -->
<xs:complexType name="ccmp-user-response-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-response-message-type">
<xs:sequence>
<xs:element ref="userResponse" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- userResponseType -->
<xs:element name="userResponse" type="userResponseType" />
<xs:complexType name="userResponseType">
<xs:sequence>
<xs:element name="userInfo" type="info:user-type"
minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- sidebarsByValResponse -->
<xs:complexType name="ccmp-sidebarsByVal-response-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-response-message-type">
<xs:sequence>
<xs:element ref="sidebarsByValResponse" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- sidebarsByValResponseType -->
<xs:element name="sidebarsByValResponse"
type="sidebarsByValResponseType" />
<xs:complexType name="sidebarsByValResponseType">
<xs:sequence>
<xs:element name="sidebarsByValInfo"
type="info:sidebars-by-val-type" minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- sidebarsByRefResponse -->
<xs:complexType name="ccmp-sidebarsByRef-response-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-response-message-type">
<xs:sequence>
<xs:element ref="sidebarsByRefResponse" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- sidebarsByRefResponseType -->
<xs:element name="sidebarsByRefResponse"
type="sidebarsByRefResponseType" />
<xs:complexType name="sidebarsByRefResponseType">
<xs:sequence>
<xs:element name="sidebarsByRefInfo" type="info:uris-type"
minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- sidebarByValResponse -->
<xs:complexType name="ccmp-sidebarByVal-response-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-response-message-type">
<xs:sequence>
<xs:element ref="sidebarByValResponse" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- sidebarByValResponseType -->
<xs:element name="sidebarByValResponse"
type="sidebarByValResponseType" />
<xs:complexType name="sidebarByValResponseType">
<xs:sequence>
<xs:element name="sidebarByValInfo"
type="info:conference-type" minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- sidebarByRefResponse -->
<xs:complexType name="ccmp-sidebarByRef-response-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-response-message-type">
<xs:sequence>
<xs:element ref="sidebarByRefResponse" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- sidebarByRefResponseType -->
<xs:element name="sidebarByRefResponse"
type="sidebarByRefResponseType" />
<xs:complexType name="sidebarByRefResponseType">
<xs:sequence>
<xs:element name="sidebarByRefInfo"
type="info:conference-type" minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- extendedResponse -->
<xs:complexType name="ccmp-extended-response-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-response-message-type">
<xs:sequence>
<xs:element ref="extendedResponse"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- extendedResponseType -->
<xs:element name="extendedResponse" type="extendedResponseType"/>
<xs:complexType name="extendedResponseType">
<xs:sequence>
<xs:element name="extensionName"
type="xs:string" minOccurs="1"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0"
maxOccurs="unbounded" />
</xs:sequence>
</xs:complexType>
<!-- optionsResponse -->
<xs:complexType name="ccmp-options-response-message-type">
<xs:complexContent>
<xs:extension base="tns:ccmp-response-message-type">
<xs:sequence>
<xs:element ref="optionsResponse"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<!-- optionsResponseType -->
<xs:element name="optionsResponse"
type="optionsResponseType" />
<xs:complexType name="optionsResponseType">
<xs:sequence>
<xs:element name="options"
type="options-type" minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- CCMP ELEMENT TYPES -->
<!-- response-codeType-->
<xs:simpleType name="response-codeType">
<xs:restriction base="xs:positiveInteger">
<xs:pattern value="[0-9][0-9][0-9]" />
</xs:restriction>
</xs:simpleType>
<!-- operationType -->
<xs:simpleType name="operationType">
<xs:restriction base="xs:token">
<xs:enumeration value="retrieve"/>
<xs:enumeration value="create"/>
<xs:enumeration value="update"/>
<xs:enumeration value="delete"/>
</xs:restriction>
</xs:simpleType>
<!-- subject-type -->
<xs:complexType name="subject-type">
<xs:sequence>
<xs:element name="username" type="xs:string"
minOccurs="0" maxOccurs="1" />
<xs:element name="password" type="xs:string"
minOccurs="0" maxOccurs="1" />
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- options-type -->
<xs:complexType name="options-type">
<xs:sequence>
<xs:element name="standard-message-list"
type="standard-message-list-type"
minOccurs="1"/>
<xs:element name="extended-message-list"
type="extended-message-list-type"
minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- standard-message-list-type -->
<xs:complexType name="standard-message-list-type">
<xs:sequence>
<xs:element name="standard-message"
type="standard-message-type"
minOccurs="1" maxOccurs="10"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- standard-message-type -->
<xs:complexType name="standard-message-type">
<xs:sequence>
<xs:element name="name"
type="standard-message-name-type"
minOccurs="1"/>
<xs:element name="operations"
type="operations-type"
minOccurs="0"/>
<xs:element name="schema-def" type="xs:string" minOccurs="0"/>
<xs:element name="description" type="xs:string" minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- standard-message-name-type -->
<xs:simpleType name="standard-message-name-type">
<xs:restriction base="xs:token">
<xs:enumeration value="confsRequest"/>
<xs:enumeration value="confRequest"/>
<xs:enumeration value="blueprintsRequest"/>
<xs:enumeration value="blueprintRequest"/>
<xs:enumeration value="usersRequest"/>
<xs:enumeration value="userRequest"/>
<xs:enumeration value="sidebarsByValRequest"/>
<xs:enumeration value="sidebarByValRequest"/>
<xs:enumeration value="sidebarsByRefRequest"/>
<xs:enumeration value="sidebarByRefRequest"/>
</xs:restriction>
</xs:simpleType>
<!-- operations-type -->
<xs:complexType name="operations-type">
<xs:sequence>
<xs:element name="operation" type="operationType"
minOccurs="1" maxOccurs="4"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- extended-message-list-type -->
<xs:complexType name="extended-message-list-type">
<xs:sequence>
<xs:element name="extended-message"
type="extended-message-type"
minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
<!-- extended-message-type -->
<xs:complexType name="extended-message-type">
<xs:sequence>
<xs:element name="name" type="xs:string" />
<xs:element name="operations"
type="operations-type"
minOccurs="0"/>
<xs:element name="schema-def" type="xs:string" />
<xs:element name="description"
type="xs:string"
minOccurs="0"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="lax"/>
</xs:complexType>
</xs:schema>
Figure 30: CCMP XML Schema
12. IANA Considerations
This document registers a new XML namespace, a new XML schema, and
the MIME type for the schema. This document also registers the
"XCON" Application Service tag and the "CCMP" Application Protocol
tag and defines registries for the CCMP operation types and response
codes.
12.1. URN Sub-Namespace Registration
This section registers a new XML namespace,
"urn:ietf:params:xml:ns:xcon-ccmp".
URI: urn:ietf:params:xml:ns:xcon-ccmp
Registrant Contact: IETF XCON working group (xcon@ietf.org), Mary
Barnes (mary.ietf.barnes@gmail.com).
XML:
BEGIN
<?xml version="1.0"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en">
<head>
<title>CCMP Messages</title>
</head>
<body>
<h1>Namespace for CCMP Messages</h1>
<h2>urn:ietf:params:xml:ns:xcon-ccmp</h2>
<p>See <a href="http://www.rfc-editor.org/rfc/rfc6503.txt">
RFC 6503</a>.</p>
</body>
</html>
END
12.2. XML Schema Registration
This section registers an XML schema per the guidelines in [RFC3688].
URI: urn:ietf:params:xml:schema:xcon-ccmp
Registrant Contact: IETF XCON working group (xcon@ietf.org), Mary
Barnes (mary.ietf.barnes@gmail.com).
Schema: The XML for this schema can be found as the entirety of
Section 11 of this document.
12.3. MIME Media Type Registration for 'application/ccmp+xml'
This section registers the "application/ccmp+xml" MIME type.
To: ietf-types@iana.org
Subject: Registration of MIME media type application/ccmp+xml
MIME media type name: application
MIME subtype name: ccmp+xml
Required parameters: (none)
Optional parameters: charset
Same as the charset parameter of "application/xml" as specified in
[RFC3023], Section 3.2.
Encoding considerations: Same as the encoding considerations of
"application/xml" as specified in [RFC3023], Section 3.2.
Security considerations: This content type is designed to carry
protocol data related to conference control. Some of the data
could be considered private. This media type does not provide any
protection and thus other mechanisms such as those described in
Section 10 are required to protect the data. This media type does
not contain executable content.
Interoperability considerations: None.
Published specification: RFC 6503.
Applications that use this media type: Centralized Conferencing
control clients and servers.
Additional Information: Magic Number(s): (none)
File extension(s): .ccmp
Macintosh File Type Code(s): TEXT
Person & email address to contact for further information: Mary
Barnes <mary.ietf.barnes@gmail.com>
Intended usage: LIMITED USE
Author/Change controller: The IETF
Other information: This media type is a specialization of
application/xml [RFC3023], and many of the considerations
described there also apply to application/ccmp+xml.
12.4. DNS Registrations
Section 12.4.1 defines an Application Service tag of "XCON", which is
used to identify the centralized conferencing (XCON) server for a
particular domain. The Application Protocol tag "CCMP", defined in
Section 12.4.2, is used to identify an XCON server that understands
CCMP.
12.4.1. Registration of a Conference Server Application Service Tag
This section registers a new S-NAPTR/U-NAPTR Application Service tag
for XCON, as mandated by [RFC3958].
Application Service Tag: XCON
Intended usage: Identifies a server that supports centralized
conferencing.
Defining publication: RFC 6503
Contact information: The authors of this document
Author/Change controller: The IESG
12.4.2. Registration of a Conference Server Application Protocol Tag
for CCMP
This section registers a new S-NAPTR/U-NAPTR Application Protocol tag
for CCMP, as mandated by [RFC3958].
Application Service Tag: CCMP
Intended Usage: Identifies the Centralized Conferencing (XCON)
Manipulation Protocol.
Applicable Service Tag(s): XCON
Terminal NAPTR Record Type(s): U
Defining Publication: RFC 6503
Contact Information: The authors of this document
Author/Change Controller: The IESG
12.5. CCMP Protocol Registry
The IANA has created a new registry for CCMP:
http://www.iana.org/assignments/ccmp-parameters. The document
creates initial sub-registries for CCMP operation types and response
codes.
12.5.1. CCMP Message Types
The following summarizes the registry for CCMP messages:
Related Registry: CCMP Message Types Registry
Defining RFC: RFC 6503.
Registration/Assignment Procedures: Following the policies outlined
in [RFC5226], the IANA policy for assigning new values for the
CCMP message types for CCMP is Specification Required.
Registrant Contact: IETF XCON working group (xcon@ietf.org), Mary
Barnes (mary.ietf.barnes@gmail.com).
This specification establishes the Message sub-registry under
http://www.iana.org/assignments/ccmp-messages. The initial Message
table is populated using the CCMP messages described in Section 4.1
and defined in the XML schema in Section 11.
Message Description Reference
------- ----------- ---------
optionsRequest Used by a conferencing client [RFC6503]
to query a conference server for
its capabilities, in terms of
supported messages.
optionsResponse Returns a list of CCMP messages [RFC6503]
supported by the specific
conference server.
blueprintsRequest Used by a conferencing client [RFC6503]
to query a conference server for
its capabilities, in terms of
available conference blueprints.
blueprintsResponse Returns a list of blueprints supported [RFC6503]
by the specific conference server.
blueprintRequest Sent to retrieve the conference object [RFC6503]
associated with a specific blueprint.
blueprintResponse Returns the conference object [RFC6503]
associated with a specific blueprint.
confsRequest Used by a conferencing client [RFC6503]
to query a conference server for
its scheduled/active conferences.
confsResponse Returns the list of the currently [RFC6503]
activated/scheduled conferences
at the server.
confRequest Used to create a conference object [RFC6503]
and/or to request an operation on
the conference object as a whole.
confResponse Indicates the result of the operation [RFC6503]
on the conference object as a whole.
userRequest Used to request an operation on the [RFC6503]
<user> element in the conference object.
userResponse Indicates the result of the requested [RFC6503]
operation on the <user> element in
the conference object.
usersRequest Used to manipulate the <users> element [RFC6503]
in the conference object, including
parameters such as the <allowed-users-list>,
<join-handling>, etc.
usersResponse Indicates the result of the request [RFC6503]
to manipulate the <users> element in
the conference object.
sidebarsByValRequest Used to retrieve the <sidebars-by-val> [RFC6503]
element of the target conference object.
sidebarsByValResponse Returns the list of the sidebar-by-val [RFC6503]
conferences within the target
conference object.
sidebarsByRefRequest Used to retrieve the <sidebars-by-ref> [RFC6503]
element of the target conference
object.
sidebarsByRefResponse Returns the list of the sidebar-by-ref [RFC6503]
conferences associated with the target
conference object.
sidebarByValRequest Used to request an operation on a [RFC6503]
sidebar-by-val conference.
sidebarByValResponse Indicates the result of the request to [RFC6503]
manipulate a sidebar-by-val conference.
sidebarByRefRequest Used to request an operation on a [RFC6503]
sideber-by-ref conference.
sidebarByRefResponse Indicates the result of the request to [RFC6503]
manipulate a sidebar-by-ref conference.
12.5.2. CCMP Response Codes
The following summarizes the requested registry for CCMP response
codes:
Related Registry: CCMP Response Code Registry
Defining RFC: RFC 6503.
Registration/Assignment Procedures: Following the policies outlined
in [RFC5226], the IANA policy for assigning new values for the
Response codes for CCMP shall be Specification Required.
Registrant Contact: IETF XCON working group (xcon@ietf.org), Mary
Barnes (mary.ietf.barnes@gmail.com).
This specification establishes the Response-code sub-registry under
http://www.iana.org/assignments/ccmp-parameters. The initial
Response-code table is populated using the Response codes defined in
Section 5.4 as follows:
Default
Response
Number String Description Reference
------ ------------- ------------ ---------
200 Success The request was successfully [RFC6503]
processed.
400 Bad Request The request was badly formed in [RFC6503]
some fashion.
401 Unauthorized The user was not authorized for [RFC6503]
the specific operation on the
conference object.
403 Forbidden The specific operation is not [RFC6503]
valid for the target conference
object.
404 Object Not Found The specific conference object [RFC6503]
was not found.
409 Conflict A requested operation cannot be [RFC6503]
successfully completed by the
server. For example, the
modification of an object
cannot be applied because
the client version of the object
is obsolete and the requested
modifications collide with the
up-to-date state of the object
stored at the server.
420 User Not Found The user who is the target of the [RFC6503]
requested operation is unknown.
421 Invalid confUserID The <confUserID> parameter of the [RFC6503]
sender in the request is invalid.
422 Invalid Conference A request to access/manipulate [RFC6503]
Password a password-protected conference
object contained an invalid
<conference-password> parameter.
423 Conference Password A request to access/manipulate [RFC6503]
Required a password-protected conference
object did not contain a
<conference-password> parameter.
424 Authentication The server wants to authenticate [RFC6503]
Required the request through the <subject>
parameter but the parameter is
not provided in the request.
425 Forbidden Delete The conferencing system cannot [RFC6503]
Parent delete the specific conference
object because it is a
parent for another conference object.
426 Forbidden Change The target conference object [RFC6503]
Protected cannot be changed (e.g., due to
policies, roles or privileges).
427 Invalid Domain Name The domain name in an [RFC6503]
AUTO_GENERATE_X
instance in the conference object
is not within the conference
server's domain of responsibility.
500 Server Internal The conference server experienced [RFC6503]
Error some sort of internal error.
501 Not Implemented The specific operation is not [RFC6503]
implemented on the conferencing
system.
510 Request Timeout The request could not be [RFC6503]
processed within a reasonable
time (as specified by the
conferencing system).
511 Resources Not The conference server cannot [RFC6503]
Available execute a command because of
resource issues, e.g., it cannot
create a conference because
the system has reached its limits
on the number of conferences.
13. Acknowledgments
The authors appreciate the feedback provided by Dave Morgan, Pierre
Tane, Lorenzo Miniero, Tobia Castaldi, Theo Zourzouvillys, Sean
Duddy, Oscar Novo, Richard Barnes, Simo Veikkolainen, Keith Drage,
Peter Reissner, Tony Lindstrom, Stephen Kent (secdir review), Brian
Carpenter (genart review), and Mykyta Yevstifeyev (IANA
considerations). Special thanks go to Roberta Presta for her
invaluable contribution to this document. Roberta has worked on the
specification of CCMP at the University of Napoli for the preparation
of her Master thesis. She has also implemented the CCMP prototype
used for the trials and from which the dumps provided in Section 6
have been extracted.
14. References
14.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2616] Fielding, R., Gettys, J., Mogul, J., Frystyk, H.,
Masinter, L., Leach, P., and T. Berners-Lee, "Hypertext
Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999.
[RFC2617] Franks, J., Hallam-Baker, P., Hostetler, J., Lawrence, S.,
Leach, P., Luotonen, A., and L. Stewart, "HTTP
Authentication: Basic and Digest Access Authentication",
RFC 2617, June 1999.
[RFC2818] Rescorla, E., "HTTP Over TLS", RFC 2818, May 2000.
[RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
January 2004.
[RFC5239] Barnes, M., Boulton, C., and O. Levin, "A Framework for
Centralized Conferencing", RFC 5239, June 2008.
[RFC5246] Dierks, T. and E. Rescorla, "The Transport Layer Security
(TLS) Protocol Version 1.2", RFC 5246, August 2008.
[RFC6265] Barth, A., "HTTP State Management Mechanism", RFC 6265,
April 2011.
[RFC6501] Novo, O., Camarillo, G., Morgan, D., and J. Urpalainen,
"Conference Information Data Model for Centralized
Conferencing (XCON)", RFC 6501, March 2012.
[W3C.REC-xmlschema-1-20041028]
Beech, D., Thompson, H., Mendelsohn, N., and M. Maloney,
"XML Schema Part 1: Structures Second Edition", World Wide
Web Consortium Recommendation REC-xmlschema-1-20041028,
October 2004,
<http://www.w3.org/TR/2004/REC-xmlschema-1-20041028>.
[W3C.REC-xmlschema-2-20041028]
Biron, P. and A. Malhotra, "XML Schema Part 2: Datatypes
Second Edition", World Wide Web Consortium
Recommendation REC-xmlschema-2-20041028, October 2004,
<http://www.w3.org/TR/2004/REC-xmlschema-2-20041028>.
14.2. Informative References
[REST] Fielding, "Architectural Styles and the Design of Network-
based Software Architectures", 2000.
[RFC3023] Murata, M., St. Laurent, S., and D. Kohn, "XML Media
Types", RFC 3023, January 2001.
[RFC3261] Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston,
A., Peterson, J., Sparks, R., Handley, M., and E.
Schooler, "SIP: Session Initiation Protocol", RFC 3261,
June 2002.
[RFC3958] Daigle, L. and A. Newton, "Domain-Based Application
Service Location Using SRV RRs and the Dynamic Delegation
Discovery Service (DDDS)", RFC 3958, January 2005.
[RFC4582] Camarillo, G., Ott, J., and K. Drage, "The Binary Floor
Control Protocol (BFCP)", RFC 4582, November 2006.
[RFC4732] Handley, M., Rescorla, E., and IAB, "Internet Denial-of-
Service Considerations", RFC 4732, December 2006.
[RFC5226] Narten, T. and H. Alvestrand, "Guidelines for Writing an
IANA Considerations Section in RFCs", BCP 26, RFC 5226,
May 2008.
[RFC6502] Camarillo, G., Srinivasan, S., Even, R., and J.
Urpalainen, "Conference Event Package Data Format
Extension for Centralized Conferencing (XCON)", RFC 6502,
March 2012.
[W3C.REC-soap12-part1-20070427]
Nielsen, H., Mendelsohn, N., Moreau, J., Gudgin, M.,
Hadley, M., Lafon, Y., and A. Karmarkar, "SOAP Version 1.2
Part 1: Messaging Framework (Second Edition)", World Wide
Web Consortium Recommendation REC-soap12-part1-20070427,
April 2007,
<http://www.w3.org/TR/2007/REC-soap12-part1-20070427>.
[W3C.REC-soap12-part2-20070427]
Moreau, J., Gudgin, M., Karmarkar, A., Mendelsohn, N.,
Hadley, M., Lafon, Y., and H. Nielsen, "SOAP Version 1.2
Part 2: Adjuncts (Second Edition)", World Wide Web
Consortium Recommendation REC-soap12-part2-20070427,
April 2007,
<http://www.w3.org/TR/2007/REC-soap12-part2-20070427>.
Appendix A. Evaluation of Other Protocol Models and Transports
Considered for CCMP
This section provides some background as to the selection of HTTP as
the transport for the CCMP requests/responses. In addition to HTTP,
the operations on the objects can be implemented in at least two
different ways, namely as remote procedure calls -- using SOAP as
described in Appendix A.1 and by defining resources following a
RESTful architecture Appendix A.2.
In both the SOAP and RESTFUL approaches, servers will have to
recreate their internal state representation of the object with each
update request, checking parameters and triggering function
invocations. In the SOAP approach, it would be possible to describe
a separate operation for each atomic element, but that would greatly
increase the complexity of the protocol. A coarser-grained approach
to CCMP does require that the server process XML elements in updates
that have not changed and that there can be multiple changes in one
update. For CCMP, the resource (REST) model might appear more
attractive, since the conference operations fit the CRUD approach.
However, neither of these approaches were considered ideal. SOAP was
considered to bring additional overhead. It is quite awkward to
apply a RESTful approach since CCMP requires a more complex request/
response protocol in order to maintain the data both in the server
and at the client. This doesn't map very elegantly to the basic
request/response model, whereby a response typically indicates
whether the request was successful or not, rather than providing
additional data to maintain the synchronization between the client
and server data. In addition, the CCMP clients may also receive the
data in notifications. While the notification method or protocol
used by some conferencing clients can be independent of CCMP, the
same data in the server is used for both CCMP and notifications -
this requires a server application above the transport layer (e.g.,
HTTP) for maintaining the data, which in the CCMP model is
transparent to the transport protocol.
Thus, the solution for CCMP defined in this document is viewed as a
good compromise amongst the most notable past candidates and is
referred to as "HTTP single-verb transport plus CCMP body". With
this approach, CCMP is able to take advantage of existing HTTP
functionality. As with SOAP, CCMP uses a "single HTTP verb" for
transport (i.e., a single transaction type for each request/response
pair); this allows decoupling CCMP messages from HTTP messages.
Similarly, as with any RESTful approach, CCMP messages are inserted
directly in the body of HTTP messages, thus avoiding any unnecessary
processing and communication burden associated with further
intermediaries. With this approach, no modification to the CCMP
messages/operations is required to use a different transport
protocol.
A.1. Using SOAP for CCMP
A remote procedure call (RPC) mechanism for CCMP could use SOAP
(Simple Object Access Protocol [W3C.REC-soap12-part1-20070427]
[W3C.REC-soap12-part2-20070427]), where conferences and the other
objects are modeled as services with associated operations.
Conferences and other objects are selected by their own local
identifiers, such as email-like names for users. This approach has
the advantage that it can easily define atomic operations that have
well-defined error conditions.
All SOAP operations would use a single HTTP verb. While the RESTful
approach requires the use of a URI for each object, SOAP can use any
token.
A.2. A RESTful Approach for CCMP
Conference objects can also be modeled as resources identified by
URIs, with the basic CRUD operations mapped to the HTTP methods POST/
PUT for creating objects, GET for reading objects, PATCH/POST/PUT for
changing objects, and DELETE for deleting them. Many of the objects,
such as conferences, already have natural URIs.
CCMP can be mapped into the CRUD (Create, Read, Update, Delete)
design pattern. The basic CRUD operations are used to manipulate
conference objects, which are XML documents containing the
information characterizing a specified conference instance, be it an
active conference or a conference blueprint used by the conference
server to create new conference instances through a simple clone
operation.
Following the CRUD approach, CCMP could use a general-purpose
protocol such as HTTP [RFC2616] to transfer domain-specific XML-
encoded data objects defined in the "Conference Information Data
Model for Centralized Conferencing" [RFC6501].
Following on the CRUD approach, CCMP could follow the well-known REST
(REpresentational State Transfer) architectural style [REST]. CCMP
could map onto the REST philosophy, by specifying resource URIs,
resource formats, methods supported at each URI and status codes that
have to be returned when a certain method is invoked on a specific
URI. A REST-style approach must ensure sure that all operations can
be mapped to HTTP operations.
The following summarizes the specific HTTP method that could be used
for each of the CCMP Requests:
Retrieve: HTTP GET could be used on XCON-URIs, so that clients can
obtain data about conference objects in the form of XML data model
documents.
Create: HTTP PUT could be used to create a new object as identified
by the XCON-URI or XCON-USERID.
Change: Either HTTP PATCH or HTTP POST could be used to change the
conference object identified by the XCON-URI.
Delete: HTTP DELETE could be used to delete conference objects and
parameters within conference objects identified by the XCON-URI.
Authors' Addresses
Mary Barnes
Polycom
TX
USA
EMail: mary.ietf.barnes@gmail.com
Chris Boulton
NS-Technologies
EMail: chris@ns-technologies.com
Simon Pietro Romano
University of Napoli
Via Claudio 21
Napoli 80125
Italy
EMail: spromano@unina.it
Henning Schulzrinne
Columbia University
Department of Computer Science
450 Computer Science Building
New York, NY 10027
EMail: hgs+xcon@cs.columbia.edu