Rfc | 4510 |
Title | Lightweight Directory Access Protocol (LDAP): Technical
Specification Road Map |
Author | K. Zeilenga, Ed. |
Date | June 2006 |
Format: | TXT,
HTML |
Obsoletes | RFC2251, RFC2252, RFC2253, RFC2254, RFC2255,
RFC2256, RFC2829, RFC2830, RFC3377, RFC3771 |
Status: | PROPOSED
STANDARD |
|
Network Working Group K. Zeilenga, Ed.
Request for Comments: 4510 OpenLDAP Foundation
Obsoletes: 2251, 2252, 2253, 2254, 2255, June 2006
2256, 2829, 2830, 3377, 3771
Category: Standards Track
Lightweight Directory Access Protocol (LDAP):
Technical Specification Road Map
Status of This Memo
This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.
Copyright Notice
Copyright (C) The Internet Society (2006).
Abstract
The Lightweight Directory Access Protocol (LDAP) is an Internet
protocol for accessing distributed directory services that act in
accordance with X.500 data and service models. This document
provides a road map of the LDAP Technical Specification.
1. The LDAP Technical Specification
The technical specification detailing version 3 of the Lightweight
Directory Access Protocol (LDAP), an Internet Protocol, consists of
this document and the following documents:
LDAP: The Protocol [RFC4511]
LDAP: Directory Information Models [RFC4512]
LDAP: Authentication Methods and Security Mechanisms [RFC4513]
LDAP: String Representation of Distinguished Names [RFC4514]
LDAP: String Representation of Search Filters [RFC4515]
LDAP: Uniform Resource Locator [RFC4516]
LDAP: Syntaxes and Matching Rules [RFC4517]
LDAP: Internationalized String Preparation [RFC4518]
LDAP: Schema for User Applications [RFC4519]
The terms "LDAP" and "LDAPv3" are commonly used to refer informally
to the protocol specified by this technical specification. The LDAP
suite, as defined here, should be formally identified in other
documents by a normative reference to this document.
LDAP is an extensible protocol. Extensions to LDAP may be specified
in other documents. Nomenclature denoting such combinations of
LDAP-plus-extensions is not defined by this document but may be
defined in some future document(s). Extensions are expected to be
truly optional. Considerations for the LDAP extensions described in
BCP 118, RFC 4521 [RFC4521] fully apply to this revision of the LDAP
Technical Specification.
IANA (Internet Assigned Numbers Authority) considerations for LDAP
described in BCP 64, RFC 4520 [RFC4520] apply fully to this revision
of the LDAP technical specification.
1.1. Conventions
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in BCP 14 [RFC2119].
2. Relationship to X.500
This technical specification defines LDAP in terms of [X.500] as an
X.500 access mechanism. An LDAP server MUST act in accordance with
the X.500 (1993) series of International Telecommunication Union -
Telecommunication Standardization (ITU-T) Recommendations when
providing the service. However, it is not required that an LDAP
server make use of any X.500 protocols in providing this service.
For example, LDAP can be mapped onto any other directory system so
long as the X.500 data and service models [X.501][X.511], as used in
LDAP, are not violated in the LDAP interface.
This technical specification explicitly incorporates portions of
X.500(93). Later revisions of X.500 do not automatically apply to
this technical specification.
3. Relationship to Obsolete Specifications
This technical specification, as defined in Section 1, obsoletes
entirely the previously defined LDAP technical specification defined
in RFC 3377 (and consisting of RFCs 2251-2256, 2829, 2830, 3771, and
3377 itself). The technical specification was significantly
reorganized.
This document replaces RFC 3377 as well as Section 3.3 of RFC 2251.
[RFC4512] replaces portions of RFC 2251, RFC 2252, and RFC 2256.
[RFC4511] replaces the majority RFC 2251, portions of RFC 2252, and
all of RFC 3771. [RFC4513] replaces RFC 2829, RFC 2830, and portions
of RFC 2251. [RFC4517] replaces the majority of RFC 2252 and
portions of RFC 2256. [RFC4519] replaces the majority of RFC 2256.
[RFC4514] replaces RFC 2253. [RFC4515] replaces RFC 2254. [RFC4516]
replaces RFC 2255.
[RFC4518] is new to this revision of the LDAP technical
specification.
Each document of this specification contains appendices summarizing
changes to all sections of the specifications they replace. Appendix
A.1 of this document details changes made to RFC 3377. Appendix A.2
of this document details changes made to Section 3.3 of RFC 2251.
Additionally, portions of this technical specification update and/or
replace a number of other documents not listed above. These
relationships are discussed in the documents detailing these portions
of this technical specification.
4. Security Considerations
LDAP security considerations are discussed in each document
comprising the technical specification.
5. Acknowledgements
This document is based largely on RFC 3377 by J. Hodges and R.
Morgan, a product of the LDAPBIS and LDAPEXT Working Groups. The
document also borrows from RFC 2251 by M. Wahl, T. Howes, and S.
Kille, a product of the ASID Working Group.
This document is a product of the IETF LDAPBIS Working Group.
6. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC4511] Sermersheim, J., Ed., "Lightweight Directory Access
Protocol (LDAP): The Protocol", RFC 4511, June 2006.
[RFC4512] Zeilenga, K., "Lightweight Directory Access Protocol
(LDAP): Directory Information Models", RFC 4512, June
2006.
[RFC4513] Harrison, R., Ed., "Lightweight Directory Access
Protocol (LDAP): Authentication Methods and Security
Mechanisms", RFC 4513, June 2006.
[RFC4514] Zeilenga, K., Ed., "Lightweight Directory Access
Protocol (LDAP): String Representation of Distinguished
Names", RFC 4514, June 2006.
[RFC4515] Smith, M., Ed. and T. Howes, "Lightweight Directory
Access Protocol (LDAP): String Representation of Search
Filters", RFC 4515, June 2006.
[RFC4516] Smith, M., Ed. and T. Howes, "Lightweight Directory
Access Protocol (LDAP): Uniform Resource Locator", RFC
4516, June 2006.
[RFC4517] Legg, S., Ed., "Lightweight Directory Access Protocol
(LDAP): Syntaxes and Matching Rules", RFC 4517, June
2006.
[RFC4518] Zeilenga, K., "Lightweight Directory Access Protocol
(LDAP): Internationalized String Preparation", RFC
4518, June 2006.
[RFC4519] Sciberras, A., Ed., "Lightweight Directory Access
Protocol (LDAP): Schema for User Applications", RFC
4519, June 2006.
[RFC4520] Zeilenga, K., "Internet Assigned Numbers Authority
(IANA) Considerations for the Lightweight Directory
Access Protocol (LDAP)", BCP 64, RFC 4520, June 2006.
[RFC4521] Zeilenga, K., "Considerations for LDAP Extensions", BCP
118, RFC 4521, June 2006.
[X.500] International Telecommunication Union -
Telecommunication Standardization Sector, "The
Directory -- Overview of concepts, models and
services", X.500(1993) (also ISO/IEC 9594-1:1994).
[X.501] International Telecommunication Union -
Telecommunication Standardization Sector, "The
Directory -- Models", X.501(1993) (also ISO/IEC 9594-
2:1994).
[X.511] International Telecommunication Union -
Telecommunication Standardization Sector, "The
Directory: Abstract Service Definition", X.511(1993)
(also ISO/IEC 9594-3:1993).
Appendix A. Changes to Previous Documents
This appendix outlines changes this document makes relative to the
documents it replaces (in whole or in part).
A.1. Changes to RFC 3377
This document is nearly a complete rewrite of RFC 3377 as much of the
material of RFC 3377 is no longer applicable. The changes include
redefining the terms "LDAP" and "LDAPv3" to refer to this revision of
the technical specification.
A.2. Changes to Section 3.3 of RFC 2251
The section was modified slightly (the word "document" was replaced
with "technical specification") to clarify that it applies to the
entire LDAP technical specification.
Author's Address
Kurt D. Zeilenga
OpenLDAP Foundation
EMail: Kurt@OpenLDAP.org
Full Copyright Statement
Copyright (C) The Internet Society (2006).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at
ietf-ipr@ietf.org.
Acknowledgement
Funding for the RFC Editor function is provided by the IETF
Administrative Support Activity (IASA).