| Rfc | 4231 |
|---|
| Title | Identifiers and Test Vectors for HMAC-SHA-224, HMAC-SHA-256,
HMAC-SHA-384, and HMAC-SHA-512 |
|---|
| Author | M. Nystrom |
|---|
| Date | December 2005 |
|---|
| Format: | TXT, HTML |
|---|
| Status: | PROPOSED STANDARD |
|---|
|
Network Working Group M. Nystrom
Request for Comments: 4231 RSA Security
Category: Standards Track December 2005
Identifiers and Test Vectors for HMAC-SHA-224, HMAC-SHA-256,
HMAC-SHA-384, and HMAC-SHA-512
Status of This Memo
This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.
Copyright Notice
Copyright (C) The Internet Society (2005).
Abstract
This document provides test vectors for the HMAC-SHA-224,
HMAC-SHA-256, HMAC-SHA-384, and HMAC-SHA-512 message authentication
schemes. It also provides ASN.1 object identifiers and Uniform
Resource Identifiers (URIs) to identify use of these schemes in
protocols. The test vectors provided in this document may be used
for conformance testing.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 2
2. Conventions Used in This Document . . . . . . . . . . . . . . 2
3. Scheme Identifiers . . . . . . . . . . . . . . . . . . . . . . 3
3.1. ASN.1 Object Identifiers . . . . . . . . . . . . . . . . 3
3.2. Algorithm URIs . . . . . . . . . . . . . . . . . . . . . 3
4. Test Vectors . . . . . . . . . . . . . . . . . . . . . . . . . 3
4.1. Introduction . . . . . . . . . . . . . . . . . . . . . . 3
4.2. Test Case 1 . . . . . . . . . . . . . . . . . . . . . . 4
4.3. Test Case 2 . . . . . . . . . . . . . . . . . . . . . . 4
4.4. Test Case 3 . . . . . . . . . . . . . . . . . . . . . . 5
4.5. Test Case 4 . . . . . . . . . . . . . . . . . . . . . . 5
4.6. Test Case 5 . . . . . . . . . . . . . . . . . . . . . . 6
4.7. Test Case 6 . . . . . . . . . . . . . . . . . . . . . . 6
4.8. Test Case 7 . . . . . . . . . . . . . . . . . . . . . . 7
5. Security Considerations . . . . . . . . . . . . . . . . . . . 7
6. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 8
7. References . . . . . . . . . . . . . . . . . . . . . . . . . . 8
7.1. Normative References . . . . . . . . . . . . . . . . . . 8
7.2. Informative References . . . . . . . . . . . . . . . . . 8
1. Introduction
This document provides test vectors for the HMAC-SHA-224,
HMAC-SHA-256, HMAC-SHA-384, and HMAC-SHA-512 message authentication
schemes. It also provides ASN.1 object identifiers and URIs to
identify use of these schemes in protocols using ASN.1 constructs
(such as those built on Secure/Multipurpose Internet Mail Extensions
(S/MIME) [4]) or protocols based on XML constructs (such as those
leveraging XML Digital Signatures [5]).
HMAC-SHA-224 is the realization of the HMAC message authentication
code [1] using the SHA-224 hash function, HMAC-SHA-256 is the
realization of the HMAC message authentication code using the SHA-256
hash function, HMAC-SHA-384 is the realization of the HMAC message
authentication code using the SHA-384 hash function, and HMAC-SHA-512
is the realization of the HMAC message authentication code using the
SHA-512 hash function. SHA-224, SHA-256, SHA-384, and SHA-512 are
all described in [2].
2. Conventions Used in This Document
The key word "SHOULD" in this document is to be interpreted as
described in RFC 2119 [3].
3. Scheme Identifiers
3.1. ASN.1 Object Identifiers
The following ASN.1 object identifiers have been allocated for these
schemes:
rsadsi OBJECT IDENTIFIER ::=
{iso(1) member-body(2) us(840) rsadsi(113549)}
digestAlgorithm OBJECT IDENTIFIER ::= {rsadsi 2}
id-hmacWithSHA224 OBJECT IDENTIFIER ::= {digestAlgorithm 8}
id-hmacWithSHA256 OBJECT IDENTIFIER ::= {digestAlgorithm 9}
id-hmacWithSHA384 OBJECT IDENTIFIER ::= {digestAlgorithm 10}
id-hmacWithSHA512 OBJECT IDENTIFIER ::= {digestAlgorithm 11}
When the "algorithm" component in a value of ASN.1 type
AlgorithmIdentifier (see, e.g., [4], Section 10) identifies one of
these schemes, the "parameter" component SHOULD be present but have
type NULL.
3.2. Algorithm URIs
The following URIs have been allocated for these schemes:
http://www.rsasecurity.com/rsalabs/pkcs/schemas/pkcs-5#hmac-sha-224
http://www.rsasecurity.com/rsalabs/pkcs/schemas/pkcs-5#hmac-sha-256
http://www.rsasecurity.com/rsalabs/pkcs/schemas/pkcs-5#hmac-sha-384
http://www.rsasecurity.com/rsalabs/pkcs/schemas/pkcs-5#hmac-sha-512
As usual, when used in the context of [5], the <ds:HMACOutputLength>
element may specify the truncated length of the scheme output.
4. Test Vectors
4.1. Introduction
The test vectors in this document have been cross-verified by three
independent implementations. An implementation that concurs with the
results provided in this document should be interoperable with other
similar implementations.
Keys, data, and digests are provided in hex.
4.2. Test Case 1
Key = 0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b
0b0b0b0b (20 bytes)
Data = 4869205468657265 ("Hi There")
HMAC-SHA-224 = 896fb1128abbdf196832107cd49df33f
47b4b1169912ba4f53684b22
HMAC-SHA-256 = b0344c61d8db38535ca8afceaf0bf12b
881dc200c9833da726e9376c2e32cff7
HMAC-SHA-384 = afd03944d84895626b0825f4ab46907f
15f9dadbe4101ec682aa034c7cebc59c
faea9ea9076ede7f4af152e8b2fa9cb6
HMAC-SHA-512 = 87aa7cdea5ef619d4ff0b4241a1d6cb0
2379f4e2ce4ec2787ad0b30545e17cde
daa833b7d6b8a702038b274eaea3f4e4
be9d914eeb61f1702e696c203a126854
4.3. Test Case 2
Test with a key shorter than the length of the HMAC output.
Key = 4a656665 ("Jefe")
Data = 7768617420646f2079612077616e7420 ("what do ya want ")
666f72206e6f7468696e673f ("for nothing?")
HMAC-SHA-224 = a30e01098bc6dbbf45690f3a7e9e6d0f
8bbea2a39e6148008fd05e44
HMAC-SHA-256 = 5bdcc146bf60754e6a042426089575c7
5a003f089d2739839dec58b964ec3843
HMAC-SHA-384 = af45d2e376484031617f78d2b58a6b1b
9c7ef464f5a01b47e42ec3736322445e
8e2240ca5e69e2c78b3239ecfab21649
HMAC-SHA-512 = 164b7a7bfcf819e2e395fbe73b56e0a3
87bd64222e831fd610270cd7ea250554
9758bf75c05a994a6d034f65f8f0e6fd
caeab1a34d4a6b4b636e070a38bce737
4.4. Test Case 3
Test with a combined length of key and data that is larger than 64
bytes (= block-size of SHA-224 and SHA-256).
Key aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaa (20 bytes)
Data = dddddddddddddddddddddddddddddddd
dddddddddddddddddddddddddddddddd
dddddddddddddddddddddddddddddddd
dddd (50 bytes)
HMAC-SHA-224 = 7fb3cb3588c6c1f6ffa9694d7d6ad264
9365b0c1f65d69d1ec8333ea
HMAC-SHA-256 = 773ea91e36800e46854db8ebd09181a7
2959098b3ef8c122d9635514ced565fe
HMAC-SHA-384 = 88062608d3e6ad8a0aa2ace014c8a86f
0aa635d947ac9febe83ef4e55966144b
2a5ab39dc13814b94e3ab6e101a34f27
HMAC-SHA-512 = fa73b0089d56a284efb0f0756c890be9
b1b5dbdd8ee81a3655f83e33b2279d39
bf3e848279a722c806b485a47e67c807
b946a337bee8942674278859e13292fb
4.5. Test Case 4
Test with a combined length of key and data that is larger than 64
bytes (= block-size of SHA-224 and SHA-256).
Key = 0102030405060708090a0b0c0d0e0f10
111213141516171819 (25 bytes)
Data = cdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcd
cdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcd
cdcdcdcdcdcdcdcdcdcdcdcdcdcdcdcd
cdcd (50 bytes)
HMAC-SHA-224 = 6c11506874013cac6a2abc1bb382627c
ec6a90d86efc012de7afec5a
HMAC-SHA-256 = 82558a389a443c0ea4cc819899f2083a
85f0faa3e578f8077a2e3ff46729665b
HMAC-SHA-384 = 3e8a69b7783c25851933ab6290af6ca7
7a9981480850009cc5577c6e1f573b4e
6801dd23c4a7d679ccf8a386c674cffb
HMAC-SHA-512 = b0ba465637458c6990e5a8c5f61d4af7
e576d97ff94b872de76f8050361ee3db
a91ca5c11aa25eb4d679275cc5788063
a5f19741120c4f2de2adebeb10a298dd
4.6. Test Case 5
Test with a truncation of output to 128 bits.
Key = 0c0c0c0c0c0c0c0c0c0c0c0c0c0c0c0c
0c0c0c0c (20 bytes)
Data = 546573742057697468205472756e6361 ("Test With Trunca")
74696f6e ("tion")
HMAC-SHA-224 = 0e2aea68a90c8d37c988bcdb9fca6fa8
HMAC-SHA-256 = a3b6167473100ee06e0c796c2955552b
HMAC-SHA-384 = 3abf34c3503b2a23a46efc619baef897
HMAC-SHA-512 = 415fad6271580a531d4179bc891d87a6
4.7. Test Case 6
Test with a key larger than 128 bytes (= block-size of SHA-384 and
SHA-512).
Key = aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaa (131 bytes)
Data = 54657374205573696e67204c61726765 ("Test Using Large")
72205468616e20426c6f636b2d53697a ("r Than Block-Siz")
65204b6579202d2048617368204b6579 ("e Key - Hash Key")
204669727374 (" First")
HMAC-SHA-224 = 95e9a0db962095adaebe9b2d6f0dbce2
d499f112f2d2b7273fa6870e
HMAC-SHA-256 = 60e431591ee0b67f0d8a26aacbf5b77f
8e0bc6213728c5140546040f0ee37f54
HMAC-SHA-384 = 4ece084485813e9088d2c63a041bc5b4
4f9ef1012a2b588f3cd11f05033ac4c6
0c2ef6ab4030fe8296248df163f44952
HMAC-SHA-512 = 80b24263c7c1a3ebb71493c1dd7be8b4
9b46d1f41b4aeec1121b013783f8f352
6b56d037e05f2598bd0fd2215d6a1e52
95e64f73f63f0aec8b915a985d786598
4.8. Test Case 7
Test with a key and data that is larger than 128 bytes (= block-size
of SHA-384 and SHA-512).
Key = aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaa (131 bytes)
Data = 54686973206973206120746573742075 ("This is a test u")
73696e672061206c6172676572207468 ("sing a larger th")
616e20626c6f636b2d73697a65206b65 ("an block-size ke")
7920616e642061206c61726765722074 ("y and a larger t")
68616e20626c6f636b2d73697a652064 ("han block-size d")
6174612e20546865206b6579206e6565 ("ata. The key nee")
647320746f2062652068617368656420 ("ds to be hashed ")
6265666f7265206265696e6720757365 ("before being use")
642062792074686520484d414320616c ("d by the HMAC al")
676f726974686d2e ("gorithm.")
HMAC-SHA-224 = 3a854166ac5d9f023f54d517d0b39dbd
946770db9c2b95c9f6f565d1
HMAC-SHA-256 = 9b09ffa71b942fcb27635fbcd5b0e944
bfdc63644f0713938a7f51535c3a35e2
HMAC-SHA-384 = 6617178e941f020d351e2f254e8fd32c
602420feb0b8fb9adccebb82461e99c5
a678cc31e799176d3860e6110c46523e
HMAC-SHA-512 = e37b6a775dc87dbaa4dfa9f96e5e3ffd
debd71f8867289865df5a32d20cdc944
b6022cac3c4982b10d5eeb55c3e4de15
134676fb6de0446065c97440fa8c6a58
5. Security Considerations
This document is intended to provide the identifications and test
vectors for the four identified message authentication code schemes
to the Internet community. No assertion of the security of these
message authentication code schemes for any particular use is
intended. The reader is referred to [1] for a discussion of the
general security of the HMAC construction.
6. Acknowledgements
The test cases in this document are derived from the test cases in
[6], although the keys and data are slightly different.
Thanks to Jim Schaad and Brad Hards for assistance in verifying the
results.
7. References
7.1. Normative References
[1] Krawczyk, H., Bellare, M., and R. Canetti, "HMAC: Keyed-Hashing
for Message Authentication", RFC 2104, February 1997.
[2] National Institute of Standards and Technology, "Secure Hash
Standard", FIPS 180-2, August 2002, with Change Notice 1 dated
February 2004.
[3] Bradner, S., "Key words for use in RFCs to Indicate Requirement
Levels", BCP 14, RFC 2119, March 1997.
7.2. Informative References
[4] Housley, R., "Cryptographic Message Syntax (CMS)", RFC 3852,
July 2004.
[5] Eastlake 3rd, D., Reagle, J., and D. Solo, "(Extensible Markup
Language) XML-Signature Syntax and Processing", RFC 3275, March
2002.
[6] Cheng, P. and R. Glenn, "Test Cases for HMAC-MD5 and HMAC-SHA-
1", RFC 2202, September 1997.
Author's Address
Magnus Nystrom
RSA Security
EMail: magnus@rsasecurity.com
Full Copyright Statement
Copyright (C) The Internet Society (2005).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at ietf-
ipr@ietf.org.
Acknowledgement
Funding for the RFC Editor function is currently provided by the
Internet Society.