| Rfc | 3602 |
|---|
| Title | The AES-CBC Cipher Algorithm and Its Use with IPsec |
|---|
| Author | S. Frankel, R.
Glenn, S. Kelly |
|---|
| Date | September 2003 |
|---|
| Format: | TXT, HTML |
|---|
| Status: | PROPOSED STANDARD |
|---|
|
Network Working Group S. Frankel
Request for Comments: 3602 R. Glenn
Category: Standards Track NIST
S. Kelly
Airespace
September 2003
The AES-CBC Cipher Algorithm and Its Use with IPsec
Status of this Memo
This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.
Copyright Notice
Copyright (C) The Internet Society (2003). All Rights Reserved.
Abstract
This document describes the use of the Advanced Encryption Standard
(AES) Cipher Algorithm in Cipher Block Chaining (CBC) Mode, with an
explicit Initialization Vector (IV), as a confidentiality mechanism
within the context of the IPsec Encapsulating Security Payload (ESP).
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1. Specification of Requirements. . . . . . . . . . . . . . 3
2. The AES Cipher Algorithm . . . . . . . . . . . . . . . . . . . 3
2.1. Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.2. Key Size and Number of Rounds. . . . . . . . . . . . . . 4
2.3. Weak Keys. . . . . . . . . . . . . . . . . . . . . . . . 4
2.4. Block Size and Padding . . . . . . . . . . . . . . . . . 4
2.5. Additional Information . . . . . . . . . . . . . . . . . 4
2.6. Performance. . . . . . . . . . . . . . . . . . . . . . . 5
3. ESP Payload . . . . . . . . . . . . . . . . . . . . . . . . . 5
3.1. ESP Algorithmic Interactions . . . . . . . . . . . . . . 6
3.2. Keying Material. . . . . . . . . . . . . . . . . . . . . 6
4. Test Vectors . . . . . . . . . . . . . . . . . . . . . . . . . 6
5. IKE Interactions . . . . . . . . . . . . . . . . . . . . . . . 10
5.1. Phase 1 Identifier . . . . . . . . . . . . . . . . . . . 10
5.2. Phase 2 Identifier . . . . . . . . . . . . . . . . . . . 10
5.3. Key Length Attribute . . . . . . . . . . . . . . . . . . 10
5.4. Hash Algorithm Considerations. . . . . . . . . . . . . . 10
6. Security Considerations . . . . . . . . . . . . . . . . . . . 11
7. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 11
8. Intellectual Property Rights Statement . . . . . . . . . . . . 11
9. References . . . . . . . . . . . . . . . . . . . . . . . . . . 12
9.1. Normative References . . . . . . . . . . . . . . . . . . 12
9.2. Informative References . . . . . . . . . . . . . . . . . 12
10. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 13
11. Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . 14
12. Full Copyright Statement . . . . . . . . . . . . . . . . . . . 15
1. Introduction
As the culmination of a four-year competitive process, NIST (the
National Institute of Standards and Technology) has selected the AES
(Advanced Encryption Standard), the successor to the venerable DES
(Data Encryption Standard). The competition was an open one, with
public participation and comment solicited at each step of the
process. The AES [AES], formerly known as Rijndael, was chosen from
a field of five finalists.
The AES selection was made on the basis of several characteristics:
+ security
+ unclassified
+ publicly disclosed
+ available royalty-free, worldwide
+ capable of handling a block size of at least 128 bits
+ at a minimum, capable of handling key sizes of 128, 192, and
256 bits
+ computational efficiency and memory requirements on a variety
of software and hardware, including smart cards
+ flexibility, simplicity and ease of implementation
The AES will be the government's designated encryption cipher. The
expectation is that the AES will suffice to protect sensitive
(unclassified) government information until at least the next
century. It is also expected to be widely adopted by businesses and
financial institutions.
It is the intention of the IETF IPsec Working Group that AES will
eventually be adopted as the default IPsec ESP cipher and will obtain
the status of MUST be included in compliant IPsec implementations.
The remainder of this document specifies the use of the AES within
the context of IPsec ESP. For further information on how the various
pieces of ESP fit together to provide security services, refer to
[ARCH], [ESP], and [ROAD].
1.1. Specification of Requirements
The keywords "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" that
appear in this document are to be interpreted as described in
[RFC-2119].
2. The AES Cipher Algorithm
All symmetric block cipher algorithms share common characteristics
and variables, including mode, key size, weak keys, block size, and
rounds. The following sections contain descriptions of the relevant
characteristics of the AES cipher.
2.1. Mode
NIST has defined 5 modes of operation for AES and other FIPS-approved
ciphers [MODES]: CBC (Cipher Block Chaining), ECB (Electronic
CodeBook), CFB (Cipher FeedBack), OFB (Output FeedBack) and CTR
(Counter). The CBC mode is well-defined and well-understood for
symmetric ciphers, and is currently required for all other ESP
ciphers. This document specifies the use of the AES cipher in CBC
mode within ESP. This mode requires an Initialization Vector (IV)
that is the same size as the block size. Use of a randomly generated
IV prevents generation of identical ciphertext from packets which
have identical data that spans the first block of the cipher
algorithm's block size.
The IV is XOR'd with the first plaintext block before it is
encrypted. Then for successive blocks, the previous ciphertext block
is XOR'd with the current plaintext, before it is encrypted.
More information on CBC mode can be obtained in [MODES, CRYPTO-S].
For the use of CBC mode in ESP with 64-bit ciphers, see [CBC].
2.2. Key Size and Number of Rounds
AES supports three key sizes: 128 bits, 192 bits, and 256 bits. The
default key size is 128 bits, and all implementations MUST support
this key size. Implementations MAY also support key sizes of 192
bits and 256 bits.
AES uses a different number of rounds for each of the defined key
sizes. When a 128-bit key is used, implementations MUST use 10
rounds. When a 192-bit key is used, implementations MUST use 12
rounds. When a 256-bit key is used, implementations MUST use 14
rounds.
2.3. Weak Keys
At the time of writing this document there are no known weak keys for
the AES.
Some cipher algorithms have weak keys or keys that MUST not be used
due to their interaction with some aspect of the cipher's definition.
If weak keys are discovered for the AES, then weak keys SHOULD be
checked for and discarded when using manual key management. When
using dynamic key management, such as [IKE], weak key checks SHOULD
NOT be performed as they are seen as an unnecessary added code
complexity that could weaken the intended security [EVALUATION].
2.4. Block Size and Padding
The AES uses a block size of sixteen octets (128 bits).
Padding is required by the AES to maintain a 16-octet (128-bit)
blocksize. Padding MUST be added, as specified in [ESP], such that
the data to be encrypted (which includes the ESP Pad Length and Next
Header fields) has a length that is a multiple of 16 octets.
Because of the algorithm specific padding requirement, no additional
padding is required to ensure that the ciphertext terminates on a 4-
octet boundary (i.e., maintaining a 16-octet blocksize guarantees
that the ESP Pad Length and Next Header fields will be right aligned
within a 4-octet word). Additional padding MAY be included, as
specified in [ESP], as long as the 16-octet blocksize is maintained.
2.5. Additional Information
AES was invented by Joan Daemen from Banksys/PWI and Vincent Rijmen
from ESAT-COSIC, both in Belgium, and is available world-wide on a
royalty-free basis. It is not covered by any patents, and the
Rijndael homepage contains the following statement: "Rijndael is
available for free. You can use it for whatever purposes you want,
irrespective of whether it is accepted as AES or not." AES's
description can be found in [AES]. The Rijndael homepage is:
http://www.esat.kuleuven.ac.be/~rijmen/rijndael/.
The AES homepage, http://www.nist.gov/aes, contains a wealth of
information about the AES, including a definitive description of the
AES algorithm, performance statistics, test vectors and intellectual
property information. This site also contains information on how to
obtain an AES reference implementation from NIST.
2.6. Performance
For a comparison table of the estimated speeds of AES and other
cipher algorithms, please see [PERF-1], [PERF-2], [PERF-3], or
[PERF-4]. The AES homepage has pointers to other analyses.
3. ESP Payload
The ESP payload is made up of the IV followed by raw cipher-text.
Thus the payload field, as defined in [ESP], is broken down according
to the following diagram:
+---------------+---------------+---------------+---------------+
| |
+ Initialization Vector (16 octets) +
| |
+---------------+---------------+---------------+---------------+
| |
~ Encrypted Payload (variable length, a multiple of 16 octets) ~
| |
+---------------------------------------------------------------+
The IV field MUST be the same size as the block size of the cipher
algorithm being used. The IV MUST be chosen at random, and MUST be
unpredictable.
Including the IV in each datagram ensures that decryption of each
received datagram can be performed, even when some datagrams are
dropped, or datagrams are re-ordered in transit.
To avoid CBC encryption of very similar plaintext blocks in different
packets, implementations MUST NOT use a counter or other low-Hamming
distance source for IVs.
3.1. ESP Algorithmic Interactions
Currently, there are no known issues regarding interactions between
the AES and other aspects of ESP, such as use of certain
authentication schemes.
3.2. Keying Material
The minimum number of bits sent from the key exchange protocol to the
ESP algorithm must be greater than or equal to the key size.
The cipher's encryption and decryption key is taken from the first
<x> bits of the keying material, where <x> represents the required
key size.
4. Test Vectors
The first 4 test cases test AES-CBC encryption. Each test case
includes the key, the plaintext, and the resulting ciphertext. The
values of keys and data are either hexadecimal numbers (prefixed by
"0x") or ASCII character strings (surrounded by double quotes). If a
value is an ASCII character string, then the AES-CBC computation for
the corresponding test case DOES NOT include the trailing null
character ('\0') of the string. The computed cyphertext values are
all hexadecimal numbers.
The last 4 test cases illustrate sample ESP packets using AES-CBC for
encryption. All data are hexadecimal numbers (not prefixed by "0x").
These test cases were verified using 2 independent implementations:
the NIST AES-CBC reference implementation and an implementation
provided by the authors of the Rijndael algorithm
(http://csrc.nist.gov/encryption/aes/rijndael/
rijndael-unix-refc.tar).
Case #1: Encrypting 16 bytes (1 block) using AES-CBC with 128-bit key
Key : 0x06a9214036b8a15b512e03d534120006
IV : 0x3dafba429d9eb430b422da802c9fac41
Plaintext : "Single block msg"
Ciphertext: 0xe353779c1079aeb82708942dbe77181a
Case #2: Encrypting 32 bytes (2 blocks) using AES-CBC with 128-bit key
Key : 0xc286696d887c9aa0611bbb3e2025a45a
IV : 0x562e17996d093d28ddb3ba695a2e6f58
Plaintext : 0x000102030405060708090a0b0c0d0e0f
101112131415161718191a1b1c1d1e1f
Ciphertext: 0xd296cd94c2cccf8a3a863028b5e1dc0a
7586602d253cfff91b8266bea6d61ab1
Case #3: Encrypting 48 bytes (3 blocks) using AES-CBC with 128-bit key
Key : 0x6c3ea0477630ce21a2ce334aa746c2cd
IV : 0xc782dc4c098c66cbd9cd27d825682c81
Plaintext : "This is a 48-byte message (exactly 3 AES blocks)"
Ciphertext: 0xd0a02b3836451753d493665d33f0e886
2dea54cdb293abc7506939276772f8d5
021c19216bad525c8579695d83ba2684
Case #4: Encrypting 64 bytes (4 blocks) using AES-CBC with 128-bit key
Key : 0x56e47a38c5598974bc46903dba290349
IV : 0x8ce82eefbea0da3c44699ed7db51b7d9
Plaintext : 0xa0a1a2a3a4a5a6a7a8a9aaabacadaeaf
b0b1b2b3b4b5b6b7b8b9babbbcbdbebf
c0c1c2c3c4c5c6c7c8c9cacbcccdcecf
d0d1d2d3d4d5d6d7d8d9dadbdcdddedf
Ciphertext: 0xc30e32ffedc0774e6aff6af0869f71aa
0f3af07a9a31a9c684db207eb0ef8e4e
35907aa632c3ffdf868bb7b29d3d46ad
83ce9f9a102ee99d49a53e87f4c3da55
Case #5: Sample transport-mode ESP packet (ping 192.168.123.100)
Key: 90d382b4 10eeba7a d938c46c ec1a82bf
SPI: 4321
Source address: 192.168.123.3
Destination address: 192.168.123.100
Sequence number: 1
IV: e96e8c08 ab465763 fd098d45 dd3ff893
Original packet:
IP header (20 bytes): 45000054 08f20000 4001f9fe c0a87b03 c0a87b64
Data (64 bytes):
08000ebd a70a0000 8e9c083d b95b0700 08090a0b 0c0d0e0f 10111213 14151617
18191a1b 1c1d1e1f 20212223 24252627 28292a2b 2c2d2e2f 30313233 34353637
Augment data with:
Padding: 01020304 05060708 090a0b0c 0d0e
Pad length: 0e
Next header: 01 (ICMP)
Pre-encryption Data with padding, pad length and next header (80 bytes):
08000ebd a70a0000 8e9c083d b95b0700 08090a0b 0c0d0e0f 10111213 14151617
18191a1b 1c1d1e1f 20212223 24252627 28292a2b 2c2d2e2f 30313233 34353637
01020304 05060708 090a0b0c 0d0e0e01
Post-encryption packet with SPI, Sequence number, IV:
IP header: 4500007c 08f20000 4032f9a5 c0a87b03 c0a87b64
SPI/Seq #: 00004321 00000001
IV: e96e8c08 ab465763 fd098d45 dd3ff893
Encrypted Data (80 bytes):
f663c25d 325c18c6 a9453e19 4e120849 a4870b66 cc6b9965 330013b4 898dc856
a4699e52 3a55db08 0b59ec3a 8e4b7e52 775b07d1 db34ed9c 538ab50c 551b874a
a269add0 47ad2d59 13ac19b7 cfbad4a6
Case #6: Sample transport-mode ESP packet
(ping -p 77 -s 20 192.168.123.100)
Key: 90d382b4 10eeba7a d938c46c ec1a82bf
SPI: 4321
Source address: 192.168.123.3
Destination address: 192.168.123.100
Sequence number: 8
IV: 69d08df7 d203329d b093fc49 24e5bd80
Original packet:
IP header (20 bytes): 45000030 08fe0000 4001fa16 c0a87b03 c0a87b64
Data (28 bytes):
0800b5e8 a80a0500 a69c083d 0b660e00 77777777 77777777 77777777
Augment data with:
Padding: 0102
Pad length: 02
Next header: 01 (ICMP)
Pre-encryption Data with padding, pad length and next header (32 bytes):
0800b5e8 a80a0500 a69c083d 0b660e00 77777777 77777777 77777777 01020201
Post-encryption packet with SPI, Sequence number, IV:
IP header: 4500004c 08fe0000 4032f9c9 c0a87b03 c0a87b64
SPI/Seq #: 00004321 00000008
IV: 69d08df7 d203329d b093fc49 24e5bd80
Encrypted Data (32 bytes):
f5199588 1ec4e0c4 488987ce 742e8109 689bb379 d2d750c0 d915dca3 46a89f75
Case #7: Sample tunnel-mode ESP packet (ping 192.168.123.200)
Key: 01234567 89abcdef 01234567 89abcdef
SPI: 8765
Source address: 192.168.123.3
Destination address: 192.168.123.200
Sequence number: 2
IV: f4e76524 4f6407ad f13dc138 0f673f37
Original packet:
IP header (20 bytes): 45000054 09040000 4001f988 c0a87b03 c0a87bc8
Data (64 bytes):
08009f76 a90a0100 b49c083d 02a20400 08090a0b 0c0d0e0f 10111213 14151617
18191a1b 1c1d1e1f 20212223 24252627 28292a2b 2c2d2e2f 30313233 34353637
Augment data with:
Padding: 01020304 05060708 090a
Pad length: 0a
Next header: 04 (IP-in-IP)
Pre-encryption Data with original IP header, padding, pad length and
next header (96 bytes):
45000054 09040000 4001f988 c0a87b03 c0a87bc8 08009f76 a90a0100 b49c083d
02a20400 08090a0b 0c0d0e0f 10111213 14151617 18191a1b 1c1d1e1f 20212223
24252627 28292a2b 2c2d2e2f 30313233 34353637 01020304 05060708 090a0a04
Post-encryption packet with SPI, Sequence number, IV:
IP header: 4500008c 09050000 4032f91e c0a87b03 c0a87bc8
SPI/Seq #: 00008765 00000002
IV: f4e76524 4f6407ad f13dc138 0f673f37
Encrypted Data (96 bytes):
773b5241 a4c44922 5e4f3ce5 ed611b0c 237ca96c f74a9301 3c1b0ea1 a0cf70f8
e4ecaec7 8ac53aad 7a0f022b 859243c6 47752e94 a859352b 8a4d4d2d ecd136e5
c177f132 ad3fbfb2 201ac990 4c74ee0a 109e0ca1 e4dfe9d5 a100b842 f1c22f0d
Case #8: Sample tunnel-mode ESP packet
(ping -p ff -s 40 192.168.123.200)
Key: 01234567 89abcdef 01234567 89abcdef
SPI: 8765
Source address: 192.168.123.3
Destination address: 192.168.123.200
Sequence number: 5
IV: 85d47224 b5f3dd5d 2101d4ea 8dffab22
Original packet:
IP header (20 bytes): 45000044 090c0000 4001f990 c0a87b03 c0a87bc8
Data (48 bytes):
0800d63c aa0a0200 c69c083d a3de0300 ffffffff ffffffff ffffffff ffffffff
ffffffff ffffffff ffffffff ffffffff
Augment data with:
Padding: 01020304 05060708 090a
Pad length: 0a
Next header: 04 (IP-in-IP)
Pre-encryption Data with original IP header, padding, pad length and
next header (80 bytes):
45000044 090c0000 4001f990 c0a87b03 c0a87bc8 0800d63c aa0a0200 c69c083d
a3de0300 ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
ffffffff 01020304 05060708 090a0a04
Post-encryption packet with SPI, Sequence number, IV:
IP header: 4500007c 090d0000 4032f926 c0a87b03 c0a87bc8
SPI/Seq #: 00008765 00000005
IV: 85d47224 b5f3dd5d 2101d4ea 8dffab22
Encrypted Data (80 bytes):
15b92683 819596a8 047232cc 00f7048f e45318e1 1f8a0f62 ede3c3fc 61203bb5
0f980a08 c9843fd3 a1b06d5c 07ff9639 b7eb7dfb 3512e5de 435e7207 ed971ef3
d2726d9b 5ef6affc 6d17a0de cbb13892
5. IKE Interactions
5.1. Phase 1 Identifier
For Phase 1 negotiations, IANA has assigned an Encryption Algorithm
ID of 7 for AES-CBC.
5.2. Phase 2 Identifier
For Phase 2 negotiations, IANA has assigned an ESP Transform
Identifier of 12 for ESP_AES.
5.3. Key Length Attribute
Since the AES allows variable key lengths, the Key Length attribute
MUST be specified in both a Phase 1 exchange [IKE] and a Phase 2
exchange [DOI].
5.4. Hash Algorithm Considerations
A companion competition, to select the successor to SHA-1, the
widely-used hash algorithm, recently concluded. The resulting
hashes, called SHA-256, SHA-384 and SHA-512 [SHA2-1, SHA2-2] are
capable of producing output of three different lengths (256, 384 and
512 bits), sufficient for the generation (within IKE) and
authentication (within ESP) of the three AES key sizes (128, 192 and
256 bits).
However, HMAC-SHA-1 [HMAC-SHA] and HMAC-MD5 [HMAC-MD5] are currently
considered of sufficient strength to serve both as IKE generators of
128-bit AES keys and as ESP authenticators for AES encryption using
128-bit keys.
6. Security Considerations
Implementations are encouraged to use the largest key sizes they can
when taking into account performance considerations for their
particular hardware and software configuration. Note that encryption
necessarily impacts both sides of a secure channel, so such
consideration must take into account not only the client side, but
the server as well. However, a key size of 128 bits is considered
secure for the foreseeable future.
For more information regarding the necessary use of random IV values,
see [CRYPTO-B].
For further security considerations, the reader is encouraged to read
[AES].
7. IANA Considerations
IANA has assigned Encryption Algorithm ID 7 to AES-CBC.
IANA has assigned ESP Transform Identifier 12 to ESP_AES.
8. Intellectual Property Rights Statement
The IETF takes no position regarding the validity or scope of any
intellectual property or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; neither does it represent that it
has made any effort to identify any such rights. Information on the
IETF's procedures with respect to rights in standards-track and
standards-related documentation can be found in BCP-11. Copies of
claims of rights made available for publication and any assurances of
licenses to be made available, or the result of an attempt made to
obtain a general license or permission for the use of such
proprietary rights by implementers or users of this specification can
be obtained from the IETF Secretariat.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights which may cover technology that may be required to practice
this standard. Please address the information to the IETF Executive
Director.
9. References
9.1. Normative References
[AES] NIST, FIPS PUB 197, "Advanced Encryption Standard
(AES)," November 2001.
http://csrc.nist.gov/publications/fips/fips197/
fips-197.{ps,pdf}
[CBC] Pereira, R. and R. Adams, "The ESP CBC-Mode Cipher
Algorithms", RFC 2451, November 1998.
[ESP] Kent, S. and R. Atkinson, "IP Encapsulating Security
Payload (ESP)", RFC 2406, November 1998.
9.2. Informative References
[ARCH] Kent, S. and R. Atkinson, "Security Architecture for the
Internet Protocol", RFC 2401, November 1998.
[CRYPTO-B] Bellovin, S., "Probable Plaintext Cryptanalysis of the
IP Security Protocols", Proceedings of the Symposium on
Network and Distributed System Security, San Diego, CA,
pp. 155-160, February 1997.
http://www.research.att.com/~smb/papers/probtxt.pdf
[CRYPTO-S] B. Schneier, "Applied Cryptography Second Edition", John
Wiley & Sons, New York, NY, 1995, ISBN 0-471-12845-7.
[DOI] Piper, D., "The Internet IP Security Domain of
Interpretation for ISAKMP", RFC 2407, November 1998.
[EVALUATION] Ferguson, N. and B. Schneier, "A Cryptographic
Evaluation of IPsec," Counterpane Internet Security,
Inc., January 2000.
http://www.counterpane.com/ipsec.pdf
[HMAC-MD5] Madson, C. and R. Glenn, "The Use of HMAC-MD5-96 within
ESP and AH", RFC 2403, November 1998.
[HMAC-SHA] Madson, C. and R. Glenn, "The Use of HMAC-SHA-1-96
within ESP and AH", RFC 2404, November 1998.
[IKE] Harkins, D. and D. Carrel, "The Internet Key Exchange
(IKE)", RFC 2409, November 1998.
[MODES] Dworkin, M., "Recommendation for Block Cipher Modes of
Operation: Methods and Techniques," NIST Special
Publication 800-38A, December 2001.
http://csrc.nist.gov/publications/nistpubs/
800-38a/sp800-38a.pdf
[PERF-1] Bassham, L. III, "Efficiency Testing of ANSI C
Implementations of Round1 Candidate Algorithms for the
Advanced Encryption Standard."
http://csrc.nist.gov/encryption/aes/round1/r1-ansic.pdf
[PERF-2] Lipmaa, Helger, "AES/Rijndael: speed."
http://www.tcs.hut.fi/~helger/aes/rijndael.html
[PERF-3] Nechvetal, J., E. Barker, D. Dodson, M. Dworkin, J.
Foti and E. Roback, "Status Report on the First Round of
the Development of the Advanced Encryption Standard."
http://csrc.nist.gov/encryption/aes/round1/r1report.pdf
[PERF-4] Schneier, B., J. Kelsey, D. Whiting, D. Wagner, C.
Hall, and N. Ferguson, "Performance Comparison of the
AES Submissions."
http://www.counterpane.com/aes-performance.pdf
[RFC-2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[ROAD] Thayer, R., Doraswamy, N. and R. Glenn, "IP Security
Document Roadmap", RFC 2411, November 1998.
[SHA2-1] NIST, FIPS PUB 180-2 "Specifications for the Secure Hash
Standard," August 2002.
http://csrc.nist.gov/publications/fips/fips180-2/
fips180-2.pdf
[SHA2-2] "Descriptions of SHA-256, SHA-384, and SHA-512."
http://csrc.nist.gov/cryptval/shs/sha256-384-512.pdf
10. Acknowledgments
Portions of this text, as well as its general structure, were
unabashedly lifted from [CBC].
The authors want to thank Hilarie Orman for providing expert advice
(and a sanity check) on key sizes, requirements for Diffie-Hellman
groups, and IKE interactions. We also thank Scott Fluhrer for his
helpful comments and recommendations.
11. Authors' Addresses
Sheila Frankel
NIST
820 West Diamond Ave.
Room 677
Gaithersburg, MD 20899
Phone: +1 (301) 975-3297
EMail: sheila.frankel@nist.gov
Scott Kelly
Airespace
110 Nortech Pkwy
San Jose CA 95134
Phone: +1 408 635 2000
EMail: scott@hyperthought.com
Rob Glenn
NIST
820 West Diamond Ave.
Room 605
Gaithersburg, MD 20899
Phone: +1 (301) 975-3667
EMail: rob.glenn@nist.gov
12. Full Copyright Statement
Copyright (C) The Internet Society (2003). All Rights Reserved.
This document and translations of it may be copied and furnished to
others, and derivative works that comment on or otherwise explain it
or assist in its implementation may be prepared, copied, published
and distributed, in whole or in part, without restriction of any
kind, provided that the above copyright notice and this paragraph are
included on all such copies and derivative works. However, this
document itself may not be modified in any way, such as by removing
the copyright notice or references to the Internet Society or other
Internet organizations, except as needed for the purpose of
developing Internet standards in which case the procedures for
copyrights defined in the Internet Standards process must be
followed, or as required to translate it into languages other than
English.
The limited permissions granted above are perpetual and will not be
revoked by the Internet Society or its successors or assignees.
This document and the information contained herein is provided on an
"AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Acknowledgement
Funding for the RFC Editor function is currently provided by the
Internet Society.