Rfc4876
TitleA Configuration Profile Schema for Lightweight Directory Access Protocol (LDAP)-Based Agents
AuthorB. Neal-Joslin, Ed., L. Howard, M. Ansari
DateMay 2007
Format:TXT, HTML
Status:INFORMATIONAL






Network Working Group                                B. Neal-Joslin, Ed.
Request for Comments: 4876                                            HP
Category: Informational                                        L. Howard
                                                                    PADL
                                                               M. Ansari
                                                                Infoblox
                                                                May 2007


                   A Configuration Profile Schema for
       Lightweight Directory Access Protocol (LDAP)-Based Agents

Status of This Memo

   This memo provides information for the Internet community.  It does
   not specify an Internet standard of any kind.  Distribution of this
   memo is unlimited.

Copyright Notice

   Copyright (C) The IETF Trust (2007).

IESG Note

   This RFC is not a candidate for any level of Internet Standard.  The
   IETF disclaims any knowledge of the fitness of this RFC for any
   purpose and in particular notes that the decision to publish is not
   based on IETF review for such things as security, congestion control,
   or inappropriate interaction with deployed protocols.  The RFC Editor
   has chosen to publish this document at its discretion.  Readers of
   this document should exercise caution in evaluating its value for
   implementation and deployment.  See RFC 3932 for more information.

Abstract

   This document consists of two primary components, a schema for agents
   that make use of the Lightweight Directory Access protocol (LDAP) and
   a proposed use case of that schema, for distributed configuration of
   similar directory user agents.  A set of attribute types and an
   object class are proposed.  In the proposed use case, directory user
   agents (DUAs) can use this schema to determine directory data
   location and access parameters for specific services they support.
   In addition, in the proposed use case, attribute and object class
   mapping allows DUAs to reconfigure their expected (default) schema to
   match that of the end user's environment.  This document is intended
   to be a skeleton for future documents that describe configuration of
   specific DUA services.




RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


Table of Contents

   1.  Background and Motivation  . . . . . . . . . . . . . . . . . .  3
   2.  General Information  . . . . . . . . . . . . . . . . . . . . .  4
     2.1.  Requirements Notation  . . . . . . . . . . . . . . . . . .  4
     2.2.  Attributes Summary . . . . . . . . . . . . . . . . . . . .  5
     2.3.  Object Classes Summary . . . . . . . . . . . . . . . . . .  5
     2.4.  Common Syntax/Encoding Definitions . . . . . . . . . . . .  5
   3.  Schema Definition  . . . . . . . . . . . . . . . . . . . . . .  6
     3.1.  Attribute Definitions  . . . . . . . . . . . . . . . . . .  6
     3.2.  Class Definition . . . . . . . . . . . . . . . . . . . . .  9
   4.  DUA Implementation Details . . . . . . . . . . . . . . . . . . 10
     4.1.  Interpreting the preferredServerList Attribute . . . . . . 10
     4.2.  Interpreting the defaultServerList Attribute . . . . . . . 11
     4.3.  Interpreting the defaultSearchBase Attribute . . . . . . . 12
     4.4.  Interpreting the authenticationMethod Attribute  . . . . . 13
     4.5.  Interpreting the credentialLevel Attribute . . . . . . . . 15
     4.6.  Interpreting the serviceSearchDescriptor Attribute . . . . 16
     4.7.  Interpreting the attributeMap Attribute  . . . . . . . . . 20
     4.8.  Interpreting the searchTimeLimit Attribute . . . . . . . . 23
     4.9.  Interpreting the bindTimeLimit Attribute . . . . . . . . . 23
     4.10. Interpreting the followReferrals Attribute . . . . . . . . 24
     4.11. Interpreting the dereferenceAliases Attribute  . . . . . . 24
     4.12. Interpreting the profileTTL Attribute  . . . . . . . . . . 24
     4.13. Interpreting the objectclassMap Attribute  . . . . . . . . 25
     4.14. Interpreting the defaultSearchScope Attribute  . . . . . . 27
     4.15. Interpreting the serviceAuthenticationMethod Attribute . . 27
     4.16. Interpreting the serviceCredentialLevel Attribute  . . . . 28
   5.  Binding to the Directory Server  . . . . . . . . . . . . . . . 29
   6.  Security Considerations  . . . . . . . . . . . . . . . . . . . 29
   7.  Acknowledgments  . . . . . . . . . . . . . . . . . . . . . . . 30
   8.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . . 30
     8.1.  Registration of Object Classes . . . . . . . . . . . . . . 31
     8.2.  Registration of Attribute Types  . . . . . . . . . . . . . 31
   9.  References . . . . . . . . . . . . . . . . . . . . . . . . . . 33
     9.1.  Normative References . . . . . . . . . . . . . . . . . . . 33
     9.2.  Informative References . . . . . . . . . . . . . . . . . . 34
   Appendix A.  Examples  . . . . . . . . . . . . . . . . . . . . . . 35













RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


1.  Background and Motivation

   LDAP [RFC4510] has brought about a nearly ubiquitous acceptance of
   the directory server.  Many client applications (DUAs) are being
   created that use LDAP directories for many different services.  And
   although the LDAP protocol has eased the development of these
   applications, some challenges still exist for both developers and
   directory administrators.

   The authors of this document are implementers of DUAs described by
   [RFC2307].  In developing these agents, we felt there were several
   issues that still need to be addressed to ease the deployment and
   configuration of a large network of these DUAs.

   One of these challenges stems from the lack of a utopian schema.  A
   utopian schema would be one that every application developer could
   agree upon and that would support every application.  Unfortunately
   today, many DUAs define their own schema, even when they provide
   similar services (like RFC 2307 vs. Microsoft's Services for Unix
   [MSSFU]).  These schemas contain similar attributes, but use
   different attribute names.  This can lead to data redundancy within
   directory entries and cause directory administrators unwanted
   challenges, updating schemas and synchronizing data.  Or, in a more
   common case, two or more applications may agree on common schema
   elements, but choose a different schema for other elements of data
   that might also be shareable between the applications.  While data
   synchronization and translation tools exist, the authors of this
   document believe there is value in providing this capability in the
   directory user agent itself.

   Aside from proposing a schema for general use, one goal of this
   document is to eliminate data redundancy by having DUAs configure
   themselves to the schema of the deployed directory, instead of
   forcing the DUA's own schema on the directory.

   Another goal of this document is to provide the DUA with enough
   configuration information so that it can discover how to retrieve its
   data in the directory, such as what locations to search in the
   directory tree.

   Finally, this document intends to describe a configuration method for
   DUAs that can be shared among many DUAs on various platforms,
   providing, as such, a configuration profile.  The purpose of this
   profile is to centralize and simplify management of DUAs.

   This document is intended to provide the skeleton framework for
   future documents that will describe the individual implementation
   details for the particular services provided by that DUA.  The



RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


   authors of this document plan to develop such a document for the
   Network Information Service DUA, described by RFC 2307 or its
   successor.

   We expect that as DUAs take advantage of this configuration scheme,
   each DUA will require additional configuration parameters, not
   specified by this document.  Thus, we would expect that new auxiliary
   object classes that contain new configuration attributes will be
   created and then joined with the structural class defined by this
   document to create a configuration profile for a particular DUA
   service.  By joining various auxiliary object classes for different
   DUA services, the configuration of various DUA services can be
   controlled by a single configuration profile entry.

2.  General Information

   The schema defined by this document is defined under the "DUA
   Configuration Schema".  This schema is derived from the object
   identifier (OID): iso (1) org (3) dod (6) internet (1) private (4)
   enterprises (1) Hewlett-Packard Company (11) directory (1) LDAP-UX
   Integration Project (3) DUA Configuration Schema (1).  This OID is
   represented in this document by the keystring "DUAConfSchemaOID"
   (1.3.6.1.4.1.11.1.3.1).

2.1.  Requirements Notation

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].






















RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


2.2.  Attributes Summary

   The following attributes are defined in this document:

   preferredServerList
   defaultServerList
   defaultSearchBase
   defaultSearchScope
   authenticationMethod
   credentialLevel
   serviceSearchDescriptor
   serviceCredentialLevel
   serviceAuthenticationMethod
   attributeMap
   objectclassMap
   searchTimeLimit
   bindTimeLimit
   followReferrals
   dereferenceAliases
   profileTTL

2.3.  Object Classes Summary

   The following object class is defined in this document:

   DUAConfigProfile

2.4.  Common Syntax/Encoding Definitions

   The proposed string encodings used by the attributes defined in this
   document can be found in Section 4.  This document makes use of ABNF
   [RFC4234] for defining new encodings.

   The following syntax definitions are used throughout this document.

















RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


                      The list of used syntaxes are:

   +---------------------------+---------------------------------------+
   | Key                       | Source                                |
   +---------------------------+---------------------------------------+
   | keystring                 | as defined by [RFC4512] Section 1.4   |
   | descr                     | as defined by [RFC4512] Section 1.4   |
   | SP                        | as defined by [RFC4512] Section 1.4   |
   | WSP                       | as defined by [RFC4512] Section 1.4   |
   | base                      | as defined by distinguishedName in    |
   |                           | [RFC4514]                             |
   | distinguishedName         | as defined by [RFC4514] Section 2     |
   | relativeDistinguishedName | as defined by [RFC4514] Section 2     |
   | scope                     | as defined by [RFC4516] Section 2     |
   | host                      | as defined by [RFC3986] Section 3.2.2 |
   | hostport                  | host [":" port ]                      |
   | port                      | as defined by [RFC3986] Section 3.2.3 |
   | serviceID                 | same as keystring                     |
   +---------------------------+---------------------------------------+

   This document does not define new syntaxes that must be supported by
   the directory server.  Instead, these syntaxes are merely expected to
   be interpreted by the DUA.  As referenced in the schema definition in
   Section 3, most encodings are expected to be stored in attributes
   using common syntaxes, such as the Directory String syntax, as
   defined in Section 3.3.6 of [RFC4517].  Refer to RFC 4517 for
   additional syntaxes used by this schema.

3.  Schema Definition

   This section defines a proposed schema.  This schema does not require
   definition of new matching rules or syntaxes, and it may be used for
   any purpose seen.  A proposed use of this schema to support elements
   of configuration of a directory user agent is described in Section 4.

3.1.  Attribute Definitions

   This section contains attribute definitions used by agents.  The
   syntax used to describe these attributes is defined in [RFC4512],
   Section 4.1.2.  Individual syntaxes and matching rules used within
   these descriptions are described in [RFC4517], Sections 3.3 and 4.2,
   respectively.









RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


   ( 1.3.6.1.4.1.11.1.3.1.1.0 NAME 'defaultServerList'
     DESC 'List of default servers'
     EQUALITY caseIgnoreMatch
     SUBSTR caseIgnoreSubstringsMatch
     SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
     SINGLE-VALUE )


   ( 1.3.6.1.4.1.11.1.3.1.1.1 NAME 'defaultSearchBase'
     DESC 'Default base for searches'
     EQUALITY distinguishedNameMatch
     SYNTAX 1.3.6.1.4.1.1466.115.121.1.12
     SINGLE-VALUE )


   ( 1.3.6.1.4.1.11.1.3.1.1.2 NAME 'preferredServerList'
     DESC 'List of preferred servers'
     EQUALITY caseIgnoreMatch
     SUBSTR caseIgnoreSubstringsMatch
     SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
     SINGLE-VALUE )


   ( 1.3.6.1.4.1.11.1.3.1.1.3 NAME 'searchTimeLimit'
     DESC 'Maximum time an agent or service allows for a
     search to complete'
     EQUALITY integerMatch
     ORDERING integerOrderingMatch
     SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
     SINGLE-VALUE )


   ( 1.3.6.1.4.1.11.1.3.1.1.4 NAME 'bindTimeLimit'
     DESC 'Maximum time an agent or service allows for a
     bind operation to complete'
     EQUALITY integerMatch
     ORDERING integerOrderingMatch
     SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
     SINGLE-VALUE )


   ( 1.3.6.1.4.1.11.1.3.1.1.5 NAME 'followReferrals'
     DESC 'An agent or service does or should follow referrals'
     EQUALITY booleanMatch
     SYNTAX 1.3.6.1.4.1.1466.115.121.1.7
     SINGLE-VALUE )





RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


   ( 1.3.6.1.4.1.11.1.3.1.1.6 NAME 'authenticationMethod'
     DESC 'Identifies the types of authentication methods either
     used, required, or provided by a service or peer'
     EQUALITY caseIgnoreMatch
     SUBSTR caseIgnoreSubstringsMatch
     SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
     SINGLE-VALUE )


   ( 1.3.6.1.4.1.11.1.3.1.1.7 NAME 'profileTTL'
     DESC 'Time to live, in seconds, before a profile is
     considered stale'
     EQUALITY integerMatch
     ORDERING integerOrderingMatch
     SYNTAX 1.3.6.1.4.1.1466.115.121.1.27
     SINGLE-VALUE )


   ( 1.3.6.1.4.1.11.1.3.1.1.9 NAME 'attributeMap'
     DESC 'Attribute mappings used, required, or supported by an
     agent or service'
     EQUALITY caseIgnoreIA5Match
     SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )


   ( 1.3.6.1.4.1.11.1.3.1.1.10 NAME 'credentialLevel'
     DESC 'Identifies type of credentials either used, required,
     or supported by an agent or service'
     EQUALITY caseIgnoreIA5Match
     SYNTAX 1.3.6.1.4.1.1466.115.121.1.26
     SINGLE-VALUE )


   ( 1.3.6.1.4.1.11.1.3.1.1.11 NAME 'objectclassMap'
     DESC 'Object class mappings used, required, or supported by
     an agent or service'
     EQUALITY caseIgnoreIA5Match
     SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )


   ( 1.3.6.1.4.1.11.1.3.1.1.12 NAME 'defaultSearchScope'
     DESC 'Default scope used when performing a search'
     EQUALITY caseIgnoreIA5Match
     SYNTAX 1.3.6.1.4.1.1466.115.121.1.26
     SINGLE-VALUE )






RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


   ( 1.3.6.1.4.1.11.1.3.1.1.13 NAME 'serviceCredentialLevel'
     DESC 'Specifies the type of credentials either used, required,
     or supported by a specific service'
     EQUALITY caseIgnoreIA5Match
     SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )


   ( 1.3.6.1.4.1.11.1.3.1.1.14 NAME 'serviceSearchDescriptor'
     DESC 'Specifies search descriptors required, used, or
     supported by a particular service or agent'
     EQUALITY caseExactMatch
     SUBSTR caseExactSubstringsMatch
     SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )


   ( 1.3.6.1.4.1.11.1.3.1.1.15 NAME 'serviceAuthenticationMethod'
     DESC 'Specifies types authentication methods either
     used, required, or supported by a particular service'
     EQUALITY caseIgnoreMatch
     SUBSTR caseIgnoreSubstringsMatch
     SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )


   ( 1.3.6.1.4.1.11.1.3.1.1.16 NAME 'dereferenceAliases'
     DESC 'Specifies if a service or agent either requires,
     supports, or uses dereferencing of aliases.'
     EQUALITY booleanMatch
     SYNTAX 1.3.6.1.4.1.1466.115.121.1.7
     SINGLE-VALUE )

3.2.  Class Definition

   The object class below is constructed from the attributes defined in
   Section 3.1, with the exception of the "cn" attribute, which is
   defined in [RFC4519]. "cn" is used to represent the name of the DUA
   configuration profile and is recommended for the relative
   distinguished name (RDN) [RFC4514] naming attribute.  This object
   class is used specifically by the DUA described in Section 4.  The
   syntax used to describe this object class is defined in [RFC4512],
   Section 4.1.1.











RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


   ( 1.3.6.1.4.1.11.1.3.1.2.5 NAME 'DUAConfigProfile'
     SUP top STRUCTURAL
     DESC 'Abstraction of a base configuration for a DUA'
     MUST ( cn )
     MAY ( defaultServerList $ preferredServerList $
           defaultSearchBase $ defaultSearchScope $
           searchTimeLimit $ bindTimeLimit $
           credentialLevel $ authenticationMethod $
           followReferrals $ dereferenceAliases $
           serviceSearchDescriptor $ serviceCredentialLevel $
           serviceAuthenticationMethod $ objectclassMap $
           attributeMap $ profileTTL ) )

4.  DUA Implementation Details

   This section describes an implementation of the schema described in
   Section 3.  Details about how a DUA should format and interpret the
   defined attributes are described below.  Agents that make use of the
   DUAConfigProfile object class are expected to follow the
   specifications in this section.

   Note: Many of the subsections below contain examples.  Unless
   otherwise specified, these examples are rendered using the LDAP Data
   Interchange Format (LDIF) [RFC2849].

4.1.  Interpreting the preferredServerList Attribute

   Interpretation:

      As described by the syntax, the preferredServerList parameter is a
      whitespace-separated list of server addresses and associated port
      numbers.  When the DUA needs to contact a directory server agent
      (DSA), the DUA MUST first attempt to contact one of the servers
      listed in the preferredServerList attribute.  The DUA MUST contact
      the DSA specified by the first server address in the list.  If
      that DSA is unavailable, the remaining DSAs MUST be queried in the
      order provided (left to right) until a connection is established
      with a DSA.  Once a connection with a DSA is established, the DUA
      SHOULD NOT attempt to establish a connection with the remaining
      DSAs.  The purpose of enumerating multiple DSAs is not for
      supplemental data, but for high availability of replicated data.
      This is also the main reason why an LDAP URL [RFC3986] syntax was
      not selected for this document.

      If the DUA is unable to contact any of the DSAs specified by the
      preferredServerList, the defaultServerList attribute MUST be
      examined, as described in Section 4.2.  The servers identified by




RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


      the preferredServerList MUST be contacted before attempting to
      contact any of the servers specified by the defaultServerList.

   Syntax:

      serverList = hostport *(SP [hostport])

   Default Value:

      The preferredServerList attribute does not have a default value.
      Instead a DUA MUST examine the defaultServerList attribute.

   Other attribute notes:

      This attribute is used in conjunction with the defaultServerList
      attribute.  Please see Section 4.2 for additional implementation
      notes.  Determining how the DUA should query the DSAs also depends
      on the additional configuration attributes, credentialLevel,
      serviceCredentialLevel, bindTimeLimit,
      serviceAuthenticationMethod, and authenticationMethod.  Please
      review Section 5 for details on how a DUA should properly bind to
      a DSA.

   Example:

         preferredServerList: 192.168.169.170 ldap1.mycorp.com
           ldap2:1389 [1080::8:800:200C:417A]:389

4.2.  Interpreting the defaultServerList Attribute

   Interpretation:

      The defaultServerList attribute MUST only be examined if the
      preferredServerList attribute is not provided, or the DUA is
      unable to establish a connection with any of the DSAs specified by
      the preferredServerList.

      If more than one address is provided, the DUA may choose either to
      accept the order provided or to create its own order, based on
      what the DUA determines is the "best" order of DSAs to query.  For
      example, the DUA may choose to examine the server list and to
      query the DSAs in order based on the "closest" server or the
      server with the least amount of "load".  Interpretation of the
      "best" server order is entirely up to the DUA, and not part of
      this document.

      Once the order of server addresses is determined, the DUA contacts
      the DSA specified by the first server address in the list.  If



RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


      that DSA is unavailable, the remaining DSAs SHOULD be queried
      until an available DSA is found, or no more DSAs are available.
      If a server address or port is invalid, the DUA SHOULD proceed to
      the next server address as described just above.

   Syntax:

      serverList = hostport *(SP [hostport])

   Default Value:

      If a defaultServerList attribute is not provided, the DUA MAY
      attempt to contact the same DSA that provided the configuration
      profile entry itself.  The default DSA is contacted only if the
      preferredServerList attribute is also not provided.

   Other attribute notes:

      This attribute is used in conjunction with the preferredServerList
      attribute.  Please see Section 4.1 for additional implementation
      notes.  Determining how the DUA should query the DSAs also depends
      on the additional configuration attributes, credentialLevel,
      serviceCredentialLevel, bindTimeLimit,
      serviceAuthenticationMethod, and authenticationMethod.  Please
      review Section 5 for details on how a DUA should properly contact
      a DSA.

   Example:

         defaultServerList: 192.168.169.170 ldap1.mycorp.com
           ldap2:1389 [1080::8:800:200C:417A]:5912

4.3.  Interpreting the defaultSearchBase Attribute

   Interpretation:

      When a DUA needs to search the DSA for information, this attribute
      provides the base for the search.  This parameter can be
      overridden or appended by the serviceSearchDescriptor attribute.
      See Section 4.6.

   Syntax:

      Defined by OID 1.3.6.1.4.1.1466.115.121.1.12 [RFC4517].







RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


   Default Value:

      There is no default value for the defaultSearchBase.  A DUA MAY
      define its own method for determining the search base, if the
      defaultSearchBase is not provided.

   Other attribute notes:

      This attribute is used in conjunction with the
      serviceSearchDescriptor attribute.  See Section 4.6.

   Example:

         defaultSearchBase: dc=mycompany,dc=com

4.4.  Interpreting the authenticationMethod Attribute

   Interpretation:

      The authenticationMethod attribute defines an ordered list of LDAP
      bind methods to be used when attempting to contact a DSA.  The
      serviceAuthenticationMethod overrides this value for a particular
      service (see Section 4.15).  Each method MUST be attempted in the
      order provided by the attribute, until a successful LDAP bind is
      performed ("none" is assumed to always be successful).  However,
      the DUA MAY skip over one or more methods.  See Section 5 for more
      information.

      none   - The DUA does not perform an LDAP bind.

      simple - The DUA performs an LDAP simple bind.

      sasl   - The DUA performs an LDAP Simple Authentication and
               Security Layer (SASL) [RFC4422] bind using the specified
               SASL mechanism and options.

      tls    - The DUA performs an LDAP StartTLS operation followed by
               the specified bind method (for more information refer to
               Section 4.14 of [RFC4511]).












RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


   Syntax:

      authMethod  = method *(";" method)

      method      = none / simple / sasl / tls

      none        = "none"

      simple      = "simple"

      sasl        = "sasl/" saslmech [ ":" sasloption ]

      sasloption  = "auth-conf" / "auth-int"

      tls         = "tls:" (none / simple / sasl)

      saslmech    = SASL mechanism name as defined in [SASLMECH]

      Note: Although multiple authentication methods may be specified in
      the syntax, at most one of each type is allowed.  That is,
      "simple;simple" is invalid.

   Default Value:

      If the authenticationMethod or serviceAuthenticationMethod (for
      that particular service) attributes are not provided, the DUA MAY
      choose to bind to the DSA using any method defined by the DUA.
      However, if either authenticationMethod or
      serviceAuthenticationMethod is provided, the DUA MUST only use the
      methods specified.

   Other attribute notes:

      When using TLS, the string "tls:sasl/EXTERNAL" implies that both
      client and server (DSA and DUA) authentications are to be
      performed.  Any other TLS authentication method implies server-
      only (DSA side credential) authentication, along with the other
      SASL method used for DUA-side authentication.

      Determining how the DUA should bind to the DSAs also depends on
      the additional configuration attributes, credentialLevel,
      serviceCredentialLevel, serviceAuthenticationMethod, and
      bindTimeLimit.  Please review Section 5 for details on how to
      properly bind to a DSA.







RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


   Example:

      authenticationMethod: tls:simple;sasl/DIGEST-MD5

      (see [RFC2831])

4.5.  Interpreting the credentialLevel Attribute

   Interpretation:

      The credentialLevel attribute defines what type(s) of
      credential(s) the DUA MUST use when contacting the DSA.  The
      serviceCredentialLevel overrides this value for a particular
      service (Section 4.16).  The credentialLevel can contain more than
      one credential type, separated by whitespace.

      anonymous The DUA SHOULD NOT use a credential when binding to the
                DSA.

      proxy     The DUA SHOULD use a known proxy identity when binding
                to the DSA.  A proxy identity is a specific credential
                that was created to represent the DUA.  This document
                does not define how the proxy user should be created, or
                how the DUA should determine what the proxy user's
                credential is.  This functionality is up to each
                implementation.

      self      When the DUA is acting on behalf of a known identity,
                the DUA MUST attempt to bind to the DSA as that
                identity.  The DUA should contain methods to determine
                the identity of the user such that the identity can be
                authenticated by the directory server using the defined
                authentication methods.

      If the credentialLevel contains more than one credential type, the
      DUA MUST use the credential types in the order specified.
      However, the DUA MAY skip over one or more credential types.  As
      soon as the DUA is able to successfully bind to the DSA, the DUA
      SHOULD NOT attempt to bind using the remaining credential types.












RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


   Syntax:

      credentialLevel   = level *(SP level)

      level             = self / proxy / anonymous

      self              = "self"

      proxy             = "proxy"

      anonymous         = "anonymous"

      Note: Although multiple credential levels may be specified in the
      syntax, at most one of each type is allowed.  Refer to
      implementation notes in Section 5 for additional syntax
      requirements for the credentialLevel attribute.

   Default Value:

      If the credentialLevel attribute is not defined, the DUA SHOULD
      NOT use a credential when binding to the DSA (also known as
      anonymous).

   Other attribute notes:

      Determining how the DUA should bind to the DSAs also depends on
      the additional configuration attributes, authenticationMethod,
      serviceAuthenticationMethod, serviceCredentialLevel, and
      bindTimeLimit.  Please review Section 5 for details on how to
      properly bind to a DSA.

   Example:

         credentialLevel: proxy anonymous

4.6.  Interpreting the serviceSearchDescriptor Attribute

   Interpretation:

      The serviceSearchDescriptor attribute defines how and where a DUA
      SHOULD search for information for a particular service.  The
      serviceSearchDescriptor contains a serviceID, followed by one or
      more base-scope-filter triples.  These base-scope-filter triples
      are used to define searches only for the specific service.
      Multiple base-scope-filters allow the DUA to search for data in
      multiple locations in the directory information tree (DIT).
      Although this syntax is very similar to the LDAP URL [RFC3986],
      this document requires the ability to supply multiple hosts as



RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


      part of the configuration of the DSA.  In addition, an ordered
      list of search descriptors is required, which cannot be specified
      by the LDAP URL.

      The serviceSearchDescriptor might also contain the DN of an entry
      that will contain an alternate profile.  The DSA SHOULD re-
      evaluate the alternate profile and perform searches as specified
      by that profile.

      If the base, as defined in the serviceSearchDescriptor, is
      followed by the "," (ASCII 0x2C) character, this base is known as
      a relative base.  This relative base may be constructed of one or
      more RDN components.  In this case, the DUA MUST define the search
      base by appending the relative base with the defaultSearchBase.

   Syntax:

      serviceSearchList = serviceID ":" serviceSearchDesc *(";"
                          serviceSearchDesc)

      serviceSearchDesc = confReferral / searchDescriptor

      searchDescriptor  = [base] ["?" [scopeSyntax] ["?" [filter]]]

      confReferral      = "ref:" distinguishedName

      base              = distinguishedName / relativeBaseName

      relativeBaseName  = 1*(relativeDistinguishedName ",")

      filter            = UTF-8 encoded string

      If the confReferral, base, relativeBaseName, or filter contains
      the ";" (ASCII 0x3B), "?"  (ASCII 0x3F), """ (ASCII 0x22), or "\"
      (ASCII 0x5C) characters, those characters MUST be escaped
      (preceded by the "\" character).  Alternately, the DN may be
      surrounded by quotes (ASCII 0x22).  Refer to RFC 4514.  If the
      confReferral, base, relativeBaseName, or filter are surrounded by
      quotes, only the """ character needs to be escaped.  Any character
      that does not need to be escaped, and yet is preceded by the "\"
      character, results in both the "\" character and the character
      itself.

      The usage and syntax of the filter string MUST be defined by the
      DUA service.  A suggested syntax would be that defined by
      [RFC4515].





RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


      If a DUA is performing a search for a particular service that has
      a serviceSearchDescriptor defined, the DUA MUST set the base,
      scope, and filter as defined.  Each base-scope-filter triple
      represents a single LDAP search operation.  If multiple base-
      scope-filter triples are provided in the serviceSearchDescriptor,
      the DUA SHOULD perform multiple search requests, and in that case,
      it MUST be in the order specified by the serviceSearchDescriptor.

      FYI: Service search descriptors do not exactly follow the LDAP URL
      syntax [RFC4516].  The reasoning for this difference is to
      separate the host name(s) from the filter.  This allows the DUA to
      have a more flexible solution in choosing its DSA.

   Default Value:

      If a serviceSearchDescriptor, or an element thereof, is not
      defined for a particular service, the DUA SHOULD create the base,
      scope, and filter as follows:

      base   - Same as the defaultSearchBase.

      scope  - Same as the defaultSearchScope.

      filter - Use defaults as defined by DUA's service.

      If the defaultSearchBase or defaultSearchScope is not defined,
      then the DUA service MAY use its own default.

   Other attribute notes:

      If a serviceSearchDescriptor exists for a given service, the
      service MUST use at least one base-scope-filter triple in
      performing searches.  It SHOULD perform multiple searches per
      service if multiple base-scope-filter triples are defined for that
      service.

      The details of how the "filter" is interpreted by each DUA's
      service is defined by that service.  This means the filter is NOT
      REQUIRED to be a legal LDAP filter [RFC4515].  Furthermore,
      determining how attribute and object class mapping affects that
      search filter MUST be defined by the service.  That is, the DUA
      SHOULD specify if the attributes in the filter are assumed to
      already have been mapped, or if it is expected that attribute
      mapping (see Section 4.7) would be applied to the filter.  In
      general practice, implementation and usability suggests that
      attribute and object class mapping (Sections 4.7 and 4.13) SHOULD
      NOT be applied to the filter defined in the
      serviceSearchDescriptor.



RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


      The serviceID is unique to a given service within the scope of any
      DUA that might use the given profile, and should be defined by
      that service.  Registration of serviceIDs is not addressed by this
      document.  However, as per the guidance at the end of Section 1,
      when DUA developers define their use of the DUAConfigProfile
      schema, they will define the serviceIDs used by that DUA.

      searchGuide and enhancedSearchGuide [RFC4517]:

      There are a few reasons why the authors chose not to take
      advantage of the existing searchGuide and enhancedSearchGuide
      attributes and related syntaxes.  While the enhancedSearchGuide
      met a number of the serviceSearchDescriptor requirements,
      serviceSearchDescriptor was developed primarily to support
      associating search operations with services.  Multiple services
      could be configured using the same profile, thus requiring the
      serviceID to be specified together with the search descriptor
      information.  A few other reasons for not using
      enhancedSearchGuide include:

         The need to specify alternate search bases, including the
         ability to specify search bases that are relative to the parent
         defaultSearchBase.

         The need to specify alternate profiles using the "ref:" syntax.

         The ability for individual services to specify their own
         syntaxes for the format of the search filter.

         The authors' belief that the user community is more familiar
         with the search filter syntax described by RFC 4515 than with
         that described by the enhancedSearchGuide syntax.

   Example:

         defaultSearchBase: dc=mycompany,dc=com

         serviceSearchDescriptor: email:ou=people,ou=org1,?
          one;ou=contractor,?one;
          ref:cn=profile,dc=mycompany,dc=com

      In this example, the DUA MUST search in
      "ou=people,ou=org1,dc=mycompany,dc=com" first.  The DUA then
      SHOULD search in "ou=contractor,dc=mycompany,dc=com", and finally
      it SHOULD search other locations as specified in the profile
      described at "cn=profile,dc=mycompany,dc=com".  For more examples,
      see Appendix A.




RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


4.7.  Interpreting the attributeMap Attribute

   Interpretation:

      A DUA SHOULD perform attribute mapping for all LDAP operations
      performed for a service that has an attributeMap entry.  Because
      attribute mapping is specific to each service within the DUA, a
      "serviceID" is required as part of the attributeMap syntax.  That
      is, not all DUA services should necessarily perform the same
      attribute mapping.

      Attribute mapping in general is expected to be used to map
      attributes of similar syntaxes as specified by the service
      supported by the DUA.  However, a DUA is NOT REQUIRED to verify
      syntaxes of mapped attributes.  If the DUA does discover that the
      syntax of the mapped attribute does not match that of the original
      attribute, the DUA MAY perform translation between the original
      syntax and the new syntax.  When DUAs do support attribute value
      translation, the method and list of capable translations SHOULD be
      documented in a description of the DUA service.

   Syntax:

      attributeMap      = serviceID ":" origAttribute "=" attributes

      origAttribute     = attribute

      attributes        = wattribute *( SP wattribute )

      wattribute        = WSP newAttribute WSP

      newAttribute      = descr / "*NULL*"

      attribute         = descr

      Values of the origAttribute are defined by and SHOULD be
      documented for the DUA service, as a list of known supported
      attributes.

   Default Value:

      By default, attributes that are used by a DUA service are not
      mapped unless mapped by the attributeMap attributes.  The DUA
      SHOULD NOT map an attribute unless it is explicitly defined by an
      attributeMap attribute.






RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


   Other attribute notes:

      When an attribute is mapped to the special keystring "*NULL*", the
      DUA SHOULD NOT request that attribute from the DSA, when
      performing a search or compare request.  If the DUA is also
      capable of performing modification on the DSA, the DUA SHOULD NOT
      attempt to modify any attribute which has been mapped to "*NULL*".

      It is assumed the serviceID is unique to a given service within
      the scope of the DSA.

      A DUA SHOULD support attribute mapping.  If it does, the following
      additional rules apply:

      1.  The list of attributes that are allowed to be mapped SHOULD be
          defined by and documented for the service.

      2.  Any supported translation of mapping from attributes of
          dissimilar syntax SHOULD also be defined and documented.

      3.  If an attribute may be mapped to multiple attributes, the DSA
          SHOULD define a syntax or usage statement for how the new
          attribute value will be constructed.  Furthermore, the
          resulting translated syntax of the combined attributes MUST be
          the same as the attribute being mapped.

      4.  A DUA MUST support mapping of attributes using the attribute
          OID.  It SHOULD support attribute mapping based on the
          attribute name.

      5.  It is recommended that attribute mapping not be applied to
          parents of the target entries.

      6.  Attribute mapping is not recursive.  In other words, if an
          attribute has been mapped to a target attribute, that new
          target attribute MUST NOT be mapped to a third attribute.

      7.  A given attribute MUST only be mapped once for a given
          service.

   Example:

      Suppose a DUA is acting on behalf of an email service.  By default
      the "email" service uses the "mail", "cn", and "sn" attributes to
      discover mail addresses.  However, the email service has been
      deployed in an environment that uses "employeeName" instead of
      "cn".  Also, instead of using the "mail" attribute for email
      addresses, the "email" attribute is used.  In this case, the



RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


      attribute "cn" can be mapped to "employeeName", allowing the DUA
      to perform searches using the "employeeName" attribute as part of
      the search filter, instead of "cn".  Also, "mail" can be mapped to
      "email" when attempting to retrieve the email address.  This
      mapping is performed by adding the attributeMap attributes to the
      configuration profile entry as follows (represented in LDIF
      [RFC2849]):

                    attributeMap: email:cn=employeeName
                    attributeMap: email:mail=email

   As described above, the DUA MAY also map a single attribute to
   multiple attributes.  When mapping a single attribute to more than
   one attribute, the new syntax or usage of the mapped attribute must
   be intrinsically defined by the DUAs service.

                 attributeMap: email:cn=firstName lastName

   In the above example, the DUA creates the new value by generating a
   space-separated string using the values of the mapped attributes.  In
   this case, a special mapping must be defined so that a proper search
   filter can be created.  For further information on this example,
   please refer to Appendix A.

      Another possibility for multiple attribute mapping might come in
      when constructing returned attributes.  For example, perhaps all
      email addresses are of a guaranteed syntax of "uid@domain".  In
      this example, the uid and domain are separate attributes in the
      directory.  The email service may define that if the "mail"
      attribute is mapped to two different attributes, it will construct
      the email address as a concatenation of the two attributes (uid
      and domain), placing the "@" character between them.

                    attributeMap: email:mail=uid domain

   Note: The attributeMap attribute contains only a list of attribute
   names that should be mapped, not the definition of how syntax
   translation should be performed.  The process used to perform
   attribute value syntax translation (such as translating a uid to a
   DN) and/or joining of multiple attribute values to form the target
   syntax (such as in the above email example) is up to the service.
   The attribute list defined in the attributeMap merely provides the
   attributes that would be used as inputs to the translation function
   provided by the service.







RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


4.8.  Interpreting the searchTimeLimit Attribute

   Interpretation:

      The searchTimeLimit attribute defines the maximum time, in
      seconds, that the DUA SHOULD allow for a search request to
      complete.

   Syntax:

      Defined by OID 1.3.6.1.4.1.1466.115.121.1.27 [RFC4517].

   Default Value:

      If the searchTimeLimit attribute is not defined or is zero, the
      searchTimeLimit SHOULD NOT be enforced by the DUA.

   Other attribute notes:

      This time limit only includes the amount of time required to
      perform the LDAP search operation.  If other operations are
      required, they do not need to be considered part of the search
      time.  See bindTimeLimit for the LDAP bind operation.

4.9.  Interpreting the bindTimeLimit Attribute

   Interpretation:

      The bindTimeLimit attribute defines the maximum time, in seconds,
      that a DUA SHOULD allow for the bind request to complete when
      performed against each server on the preferredServerList or
      defaultServerList.

   Syntax:

      Defined by OID 1.3.6.1.4.1.1466.115.121.1.27.

   Default Value:

      If the bindTimeLimit attribute is not defined or is zero, the
      bindTimeLimit SHOULD NOT be enforced by the DUA.

   Other attribute notes:

      This time limit only includes the amount of time required to
      perform the LDAP bind operation.  If other operations are
      required, those operations do not need to be considered part of
      the bind time.  See searchTimeLimit for the LDAP search operation.



RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


4.10.  Interpreting the followReferrals Attribute

   Interpretation:

      If set to TRUE, the DUA SHOULD follow any referrals if discovered.

      If set to FALSE, the DUA MUST NOT follow referrals.

   Syntax:

      Defined by OID 1.3.6.1.4.1.1466.115.121.1.7 [RFC4517].

   Default Value:

      If the followReferrals attribute is not set or set to an invalid
      value, the default value is TRUE.

4.11.  Interpreting the dereferenceAliases Attribute

   Interpretation:

      If set to TRUE, the DUA SHOULD enable alias dereferencing.

      If set to FALSE, the DUA MUST NOT enable alias dereferencing.

   Syntax:

      Defined by OID 1.3.6.1.4.1.1466.115.121.1.7.

   Default Value:

      If the dereferenceAliases attribute is not set or set to an
      invalid value, the default value is TRUE.

4.12.  Interpreting the profileTTL Attribute

   Interpretation:

      The profileTTL attribute defines how often the DUA SHOULD reload
      and reconfigure itself using the corresponding configuration
      profile entry.  The value is represented in seconds.  Once a DUA
      reloads the profile entry, it SHOULD reconfigure itself with the
      new values.

   Syntax:

      Defined by OID 1.3.6.1.4.1.1466.115.121.1.27.




RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


   Default Value:

      If not specified, the DUA MAY use its own reconfiguration policy.

   Other attribute notes:

      If the profileTTL value is zero, the DUA SHOULD NOT automatically
      reload the configuration profile.

4.13.  Interpreting the objectclassMap Attribute

   Interpretation:

      A DUA MAY perform object class mapping for all LDAP operations
      performed for a service that has an objectclassMap entry.  Because
      object class mapping is specific for each service within the DUA,
      a "serviceID" is required as part of the objectclassMap syntax.
      That is, not all DUA services should necessarily perform the same
      object class mapping.

      Object class mapping SHOULD be used in conjunction with attribute
      mapping to map the schema required by the service to an equivalent
      schema that is available in the directory.

      Object class mapping may or may not be required by a DUA.  Often,
      the objectclass attribute is used in search filters.  Section 4.7
      recommends that attribute mapping not be applied to the
      serviceSearchDescriptor.  Thus, if the default object classes are
      not used in a DUA deployment, typically only the
      serviceSearchDescriptor needs to be defined to reflect that
      mapping.  However, when the service search descriptor is not
      provided, and the default search filter for that service contains
      the objectclass attribute, that search filter SHOULD be redefined
      by object class mapping, if defined.  If a default search filter
      is not used, it SHOULD be redefined through the
      serviceSearchDescriptor.  If a serviceSearchDescriptor is defined
      for a particular service, it SHOULD NOT be remapped by either the
      objectclassMap or attributeMap values.

      One condition where the objectclassMap SHOULD be used is when the
      DUA is providing gateway functionality.  In this case, the DUA is
      acting on behalf of another service, which may pass in a search
      filter itself.  In this type of DUA, the DUA may alter the search
      filter according to the appropriate attributeMap and
      objectclassMap values.  In this case, it is also assumed that a
      serviceSearchDescriptor is not defined.





RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


   Syntax:

      objectclassMap    = serviceID ":" origObjectclass "=" objectclass

      origObjectclass   = objectclass

      objectclass       = keystring

      Values of the origObjectclass depend on the type of DUA Service
      using the object class mapping feature.

   Default Value:

      The DUA MUST NOT remap an object class unless it is explicitly
      defined by an objectclassMap attribute.

   Other attribute notes:

      A DUA SHOULD support object class mapping.  If it does, the DUA
      MUST support mapping of object classes using the objectclass OID.
      It SHOULD support object class mapping based on the object class
      name.

      It is assumed the serviceID is unique to a given service within
      the scope of the DSA.

   Example:

      Suppose a DUA is acting on behalf of an email service.  By default
      the "email" service uses the "mail", "cn", and "sn" attributes to
      discover mail addresses in entries created using inetOrgPerson
      object class [RFC2789].  However, the email service has been
      deployed in an environment that uses entries created using
      "employee" object class.  In this case, the attribute "cn" can be
      mapped to "employeeName", and "inetOrgPerson" can be mapped to
      "employee", allowing the DUA to perform LDAP operations using the
      entries that exist in the directory.  This mapping is performed by
      adding attributeMap and objectclassMap attributes to the
      configuration profile entry as follows (represented in LDIF
      [RFC2849]):

                attributeMap: email:cn=employeeName
                objectclassMap: email:inetOrgPerson=employee








RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


4.14.  Interpreting the defaultSearchScope Attribute

   Interpretation:

      When a DUA needs to search the DSA for information, this attribute
      provides the "scope" for the search.  This parameter can be
      overridden by the serviceSearchDescriptor attribute.  See
      Section 4.6.

   Syntax:

      scopeSyntax = "base" / "one" / "sub"

   Default Value:

      The default value for the defaultSearchScope SHOULD be defined by
      the DUA service.  If the default search scope for a service is not
      defined, then the scope SHOULD be for the DUA to perform a subtree
      search.

4.15.  Interpreting the serviceAuthenticationMethod Attribute

   Interpretation:

      The serviceAuthenticationMethod attribute defines an ordered list
      of LDAP bind methods to be used when attempting to contact a DSA
      for a particular service.  Interpretation and use of this
      attribute is the same as Section 4.4, but specific for each
      service.

   Syntax:

      svAuthMethod = serviceID ":" method *(";" method)

      Note: Although multiple authentication methods may be specified in
      the syntax, at most one of each type is allowed.

   Default Value:

      If the serviceAuthenticationMethod attribute is not provided, the
      authenticationMethod SHOULD be followed, or its default.

   Other attribute notes:

      Determining how the DUA should bind to the DSAs also depends on
      the additional configuration attributes, credentialLevel,
      serviceCredentialLevel, and bindTimeLimit.  Please review
      Section 5 for details on how to properly bind to a DSA.



RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


   Example:

         serviceAuthenticationMethod: email:tls:simple;sasl/DIGEST-MD5

4.16.  Interpreting the serviceCredentialLevel Attribute

   Interpretation:

      The serviceCredentialLevel attribute defines what type(s) of
      credential(s) the DUA SHOULD use when contacting the DSA for a
      particular service.  Interpretation and use of this attribute are
      the same as Section 4.5.

   Syntax:

      svCredentialLevel = serviceID ":" level *(SP level)

      Refer to implementation notes in Section 5 for additional syntax
      requirements for the credentialLevel attribute.

      Note: Although multiple credential levels may be specified in the
      syntax, at most one of each type is allowed.

   Default Value:

      If the serviceCredentialLevel attribute is not defined, the DUA
      MUST examine the credentialLevel attribute, or if one is not
      provided, the DUA must follow its default.

   Other attribute notes:

      Determining how the DUA should bind to the DSAs also depends on
      the additional configuration attributes,
      serviceAuthenticationMethod, authenticationMethod, and
      bindTimeLimit.  Please review Section 5 for details on how to
      properly bind to a DSA.

   Example:

         serviceCredentialLevel: email:proxy anonymous











RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


5.  Binding to the Directory Server

   The DUA SHOULD use the following algorithm when binding to the
   server:

   for (clevel in credLevel) [see Note 1]
     if (clevel is "anonymous")
       for (host in hostnames) [see Note 2]
         if (server is responding)
           return success
       return failure
     else
       for (amethod in authMethod) [see Note 3]
         if (amethod is none)
           for (host in hostnames)
             if (server is responding)
               return success
           return failure
         else
           for (host in hostnames)
             authenticate using amethod and clevel
             if (authentication passed)
               return success
   return failure

   Note 1:   The credLevel is a list of credential levels as defined in
             serviceCredentialLevel (Section 4.16) for a given service.
             If the serviceCredentialLevel is not defined, the DUA MUST
             examine the credentialLevel attribute.

   Note 2:   hostnames is the list of servers to contact as defined in
             Sections 4.1 and 4.2.

   Note 3:   The authMethod is a list of authentication methods as
             defined in serviceAuthenticationMethod (Section 4.15) for a
             given service.  If the serviceAuthenticationMethod is not
             defined, the DUA MUST examine the authenticationMethod
             attribute.

6.  Security Considerations

   The profile entries MUST be protected against unauthorized
   modification.  Each service needs to consider implications of
   providing its service configuration as part of this profile and limit
   access to the profile entries accordingly.






RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


   The management of the authentication credentials for the DUA is
   outside the scope of this document and needs to be handled by the
   DUA.

   Since the DUA needs to know how to properly bind to the directory
   server, the access control configuration of the DSA MUST assure that
   the DSA can view all the elements of the DUAConfigProfile attributes.
   For example, if the credentialLevel attribute contains "Self", but
   the DSA is unable to access the credentialLevel attribute, the DUA
   will instead attempt an anonymous connection to the directory server.

   The algorithm described by Section 5 also has security
   considerations.  Altering that design will alter the security aspects
   of the configuration profile.

   At times, DUAs connect to multiple directory servers in order to
   support potential high-availability and/or performance requirements.
   As such, each directory server specified in the preferredServer list
   and defaultServerList MUST contain the same (replicated) data and be
   part of the same security domain.  This means the directory-supported
   authentication methods, authentication policies, and access control
   policies for directory data are exactly the same across all the
   defined directory servers.

7.  Acknowledgments

   There were several additional authors of this document.  However, we
   chose to represent only one author per company in the heading.  From
   Sun, we would like to acknowledge Roberto Tam for his design work on
   Sun's first LDAP name service product and his input for this
   document.  From Hewlett-Packard, we'd like to acknowledge Dave Binder
   for his work architecting Hewlett-Packard's LDAP name service product
   as well as his design guidance on this document.  We'd also like to
   acknowledge Grace Lu from HP, for her input and implementation of
   HP's configuration profile manager code.

8.  IANA Considerations

   This document defines new LDAP attributes and an object class for
   object identifier descriptors.  As specified by Section 3.4 and
   required by Section 4 of [RFC4520], this document registers new
   descriptors as follows per the Expert Review.









RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


8.1.  Registration of Object Classes

   Subject:  Request for LDAP Descriptor Registration

   Descriptor (short name): DUAConfigProfile

   Object Identifier:  1.3.6.1.4.1.11.1.3.1.2.5

   Person & email address to contact for further information:
      See "Author/Change Controller"

   Usage: object class

   Specification: RFC 4876


   Author/Change Controller:

      Bob Neal-Joslin
      Hewlett-Packard Company
      19420 Homestead RD
      Cupertino, CA 95014
      USA
      Phone: +1 408-447-3044
      EMail: bob_joslin@hp.com

   Comments:

      See also the associated request for the defaultServerList,
      defaultSearchBase, preferredServerList, searchTimeLimit,
      bindTimeLimit, followReferrals, authenticationMethod,
      profileTTL, attributeMap, credentialLevel, objectclassMap,
      defaultSearchScope, serviceCredentialLevel,
      serviceSearchDescriptor, serviceAuthenticationMethod, and
      dereferenceAliases attribute types.

8.2.  Registration of Attribute Types

   Subject:  Request for LDAP Descriptor Registration

   Descriptor (short name):  See comments

   Object Identifier:  See comments

   Person & email address to contact for further information:
      See "Author/Change Controller"

   Usage:  attribute type



RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


   Specification: RFC 4876


   Author/Change Controller:

      Bob Neal-Joslin
      Hewlett-Packard Company
      19420 Homestead RD
      Cupertino, CA 95014
      USA
      Phone: +1 408-447-3044
      EMail: bob_joslin@hp.com

   Comments:

      The following object identifiers and associated attribute
      types have been registered.

        OID                           Attribute Type
        --------------------------    ---------------------------
        1.3.6.1.4.1.11.1.3.1.1.0      defaultServerList
        1.3.6.1.4.1.11.1.3.1.1.1      defaultSearchBase
        1.3.6.1.4.1.11.1.3.1.1.2      preferredServerList
        1.3.6.1.4.1.11.1.3.1.1.3      searchTimeLimit
        1.3.6.1.4.1.11.1.3.1.1.4      bindTimeLimit
        1.3.6.1.4.1.11.1.3.1.1.5      followReferrals
        1.3.6.1.4.1.11.1.3.1.1.6      authenticationMethod
        1.3.6.1.4.1.11.1.3.1.1.7      profileTTL
        1.3.6.1.4.1.11.1.3.1.1.9      attributeMap
        1.3.6.1.4.1.11.1.3.1.1.10     credentialLevel
        1.3.6.1.4.1.11.1.3.1.1.11     objectclassMap
        1.3.6.1.4.1.11.1.3.1.1.12     defaultSearchScope
        1.3.6.1.4.1.11.1.3.1.1.13     serviceCredentialLevel
        1.3.6.1.4.1.11.1.3.1.1.14     serviceSearchDescriptor
        1.3.6.1.4.1.11.1.3.1.1.15     serviceAuthenticationMethod
        1.3.6.1.4.1.11.1.3.1.1.16     dereferenceAliases

      Please also see the associated registration request for the
      DUAConfigProfile object class.












RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


9.  References

9.1.  Normative References

   [RFC2119]   Bradner, S., "Key words for use in RFCs to Indicate
               Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC3986]   Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
               Resource Identifier (URI): Generic Syntax", STD 66,
               RFC 3986, January 2005.

   [RFC4234]   Crocker, D., Ed. and P. Overell, "Augmented BNF for
               Syntax Specifications: ABNF", RFC 4234, October 2005.

   [RFC4510]   Zeilenga, K., "Lightweight Directory Access Protocol
               (LDAP): Technical Specification Road Map", RFC 4510,
               June 2006.

   [RFC4511]   Sermersheim, J., "Lightweight Directory Access Protocol
               (LDAP): The Protocol", RFC 4511, June 2006.

   [RFC4512]   Zeilenga, K., "Lightweight Directory Access Protocol
               (LDAP): Directory Information Models", RFC 4512,
               June 2006.

   [RFC4514]   Zeilenga, K., "Lightweight Directory Access Protocol
               (LDAP): String Representation of Distinguished Names",
               RFC 4514, June 2006.

   [RFC4516]   Smith, M. and T. Howes, "Lightweight Directory Access
               Protocol (LDAP): Uniform Resource Locator", RFC 4516,
               June 2006.

   [RFC4517]   Legg, S., "Lightweight Directory Access Protocol (LDAP):
               Syntaxes and Matching Rules", RFC 4517, June 2006.

   [RFC4519]   Sciberras, A., "Lightweight Directory Access Protocol
               (LDAP): Schema for User Applications", RFC 4519,
               June 2006.

   [SASLMECH]  IANA, "SIMPLE AUTHENTICATION AND SECURITY LAYER (SASL)
               MECHANISMS", July 2006,
               <http://www.iana.org/assignments/sasl-mechanisms>.








RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


9.2.  Informative References

   [MSSFU]     Microsoft Corporation, "Windows Services for Unix 3.5",
               <http://www.microsoft.com/windows/sfu/>.

   [RFC2307]   Howard, L., "An Approach for Using LDAP as a Network
               Information Service", RFC 2307, March 1998.

   [RFC2789]   Freed, N. and S. Kille, "Mail Monitoring MIB", RFC 2789,
               March 2000.

   [RFC2831]   Leach, P. and C. Newman, "Using Digest Authentication as
               a SASL Mechanism", RFC 2831, May 2000.

   [RFC2849]   Good, G., "The LDAP Data Interchange Format (LDIF) -
               Technical Specification", RFC 2849, June 2000.

   [RFC4422]   Melnikov, A. and K. Zeilenga, "Simple Authentication and
               Security Layer (SASL)", RFC 4422, June 2006.

   [RFC4515]   Smith, M. and T. Howes, "Lightweight Directory Access
               Protocol (LDAP): String Representation of Search
               Filters", RFC 4515, June 2006.

   [RFC4520]   Zeilenga, K., "Internet Assigned Numbers Authority (IANA)
               Considerations for the Lightweight Directory Access
               Protocol (LDAP)", BCP 64, RFC 4520, June 2006.
























RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


Appendix A.  Examples

   In this section, we will describe a fictional DUA that provides one
   service, called the "email" service.  This service would be similar
   to an email client that uses an LDAP directory to discover email
   addresses based on a textual representation of the recipient's
   colloquial name.

   This email service is defined by default to expect that users with
   email addresses will be of the "inetOrgPerson" object class type
   [RFC2789].  And by default, the "email" service expects the
   colloquial name to be stored in the "cn" attribute, while it expects
   the email address to be stored in the "mail" attribute (as one would
   expect as defined by the inetOrgPerson object class).

   As a special feature, the "email" service will perform a special type
   of attribute mapping when performing searches.  If the "cn" attribute
   has been mapped to two or more attributes, the "email" service will
   parse the requested search string and map each whitespace-separated
   token into the mapped attributes, respectively.

   The default search filter for the "email" service is
   "(objectclass=inetOrgPerson)".  The email service also defines that
   when it performs a name-to-address discovery, it will wrap the search
   filter inside a complex search filter as follows:

   (&(<filter>)(cn~=<name string>))

   Or, if "cn" has been mapped to multiple attributes, that wrapping
   would appear as follows:

   (&(<filter>)(attr1~=<token1>)(attr2~=<token2>)...)

   The below examples show how the "email" service builds its search
   requests, based on the defined profile.  In all cases, the
   defaultSearchBase is "o=airius.com", and the defaultSearchScope is
   undefined.

   In addition, for all examples, we assume that the "email" service has
   been requested to discover the email address for "Jane Hernandez".

   Example 1:

   serviceSearchDescriptor: email:"ou=marketing,"

   base: ou=marketing,o=airius.com
   scope: sub
   filter: (&(objectclass=inetOrgPerson)(cn~=Jane Hernandez))



RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


   Example 2:

   serviceSearchDescriptor: email:"ou=marketing,"?one?
    (&(objectclass=inetOrgPerson)(c=us))
   attributeMap: email:cn=2.5.4.42 sn

   Note: 2.5.4.42 is the OID that represents the "givenName"
   attribute.

   In this example, the email service performs <name string> parsing as
   described above to generate a complex search filter.  The above
   example results in one search.

   base: ou=marketing,o=airius.com
   scope: one
   filter: (&(&(objectclass=inetOrgPerson)(c=us))
               (2.5.4.42~=Jane)(sn~=Hernandez))

   Example 3:

   serviceSearchDescriptor: email:ou=marketing,"?base
   attributeMap: email:cn=name

   This example is invalid, because either the quote should have
   been escaped, or there should have been a leading quote.

   Example 4:

   serviceSearchDescriptor: email:ou=\\mar\\\\keting,\\"?base
   attributeMap: email:cn=name

   base: ou=\\mar\\keting,"
   scope: base
   filter (&(objectclass=inetOrgPerson)(name~=Jane Hernandez))

   Example 5:

   serviceSearchDescriptor: email:ou="marketing",o=supercom

   This example is invalid, since the quote was not a leading quote,
   and thus should have been escaped.










RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


   Example 6:

   serviceSearchDescriptor: email:??(&(objectclass=person)
                                    (ou=Org1 \\\\(temporary\\\\)))

   base: o=airius.com
   scope: sub
   filter: (&((&(objectclass=person)(ou=Org1 \\(Temporary\\)))
             (cn~=Jane Henderson)))

   Example 7:

   serviceSearchDescriptor: email:"ou=funny?org,"

   base: ou=funny?org,o=airius.com
   scope: sub
   filter (&(objectclass=inetOrgPerson)(cn~=Jane Hernandez))


































RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


Authors' Addresses

   Bob Neal-Joslin (editor)
   Hewlett-Packard Company
   19420 Homestead RD
   M/S 4029
   Cupertino, CA  95014
   US

   Phone: +1 408 447 3044
   EMail: bob_joslin@hp.com
   URI:   http://www.hp.com


   Luke Howard
   PADL Software Pty. Ltd.
   PO Box 59
   Central Park, Vic  3145
   AU

   EMail: lukeh@padl.com
   URI:   http://www.padl.com


   Morteza Ansari
   Infoblox
   475 Potrero Avenue
   Sunnyvale, CA  94085
   US

   Phone: +1 408 716 4300
   EMail: morteza@infoblox.com



















RFC 4876         LDAP-Based Agent Configuration Schema          May 2007


Full Copyright Statement

   Copyright (C) The IETF Trust (2007).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
   THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
   OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
   THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.

Acknowledgement

   Funding for the RFC Editor function is currently provided by the
   Internet Society.