Rfc4318
TitleDefinitions of Managed Objects for Bridges with Rapid Spanning Tree Protocol
AuthorD. Levi, D. Harrington
DateDecember 2005
Format:TXT, HTML
Status:PROPOSED STANDARD






Network Working Group                                            D. Levi
Request for Comments: 4318                               Nortel Networks
Category: Standards Track                                  D. Harrington
                                                      Effective Software
                                                           December 2005

               Definitions of Managed Objects for Bridges
                   with Rapid Spanning Tree Protocol

Status of This Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2005).

Abstract

   This memo defines an SMIv2 MIB module for managing the Rapid Spanning
   Tree capability defined by the IEEE P802.1t and P802.1w amendments to
   IEEE Std 802.1D-1998 for bridging between Local Area Network (LAN)
   segments.  The objects in this MIB are defined to apply both to
   transparent bridging and to bridges connected by subnetworks other
   than LAN segments.

Table of Contents

   1. The Internet-Standard Management Framework ......................2
   2. Overview ........................................................2
   3. Relationship to IEEE 802.1t and 802.1w Amendments ...............2
   4. Relation to the BRIDGE-MIB ......................................3
   5. Definitions for RSTP-MIB ........................................3
   6. Acknowledgements ...............................................10
   7. IANA Considerations ............................................10
   8. Security Considerations ........................................10
   9. Normative References ...........................................11
   10. Informative References ........................................12









RFC 4318                        RSTP MIB                   December 2005


1.  The Internet-Standard Management Framework

   For a detailed overview of the documents that describe the current
   Internet-Standard Management Framework, please refer to section 7 of
   RFC 3410 [RFC3410].

   Managed objects are accessed via a virtual information store, termed
   the Management Information Base or MIB.  MIB objects are generally
   accessed through the Simple Network Management Protocol (SNMP).
   Objects in the MIB are defined using the mechanisms defined in the
   Structure of Management Information (SMI).  This memo specifies a MIB
   module that is compliant to the SMIv2, which is described in STD 58,
   RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
   [RFC2580].

2.  Overview

   This memo defines an SMIv2 MIB module for managing the Rapid Spanning
   Tree (RSTP) capability defined by the IEEE P802.1t [802.1t] and
   P802.1w [802.1w] amendments to IEEE Std 802.1D-1998 [802.1D-1998] for
   bridging between Local Area Network (LAN) segments.  The objects in
   this MIB are defined to apply both to transparent bridging and to
   bridges connected by subnetworks other than LAN segments.

3.  Relationship to IEEE 802.1t and 802.1w Amendments

   This document defines managed objects for the Rapid Spanning Tree
   Protocol defined by the IEEE P802.1t and IEEE P802.1w amendments to
   802.1D-1998.

   RSTP-MIB Name                       IEEE 802.1 Reference

   dot1dStp
     dot1dStpVersion                   (w) 17.16.1  ForceVersion
     dot1dStpTxHoldCount               (w) 17.16.6  TxHoldCount
     dot1dStpExtPortTable
       dot1dStpPortProtocolMigration   (w) 17.18.10 mcheck
       dot1dStpPortAdminEdgePort       (t) 18.3.3   adminEdgePort
       dot1dStpPortOperEdgePort        (t) 18.3.4   operEdgePort
       dot1dStpPortAdminPointToPoint   (w) 6.4.3    adminPointToPointMAC
       dot1dStpPortOperPointToPoint    (w) 6.4.3    operPointToPointMAC
       dot1dStpPortAdminPathCost       (D) 8.5.5.3  Path Cost

   There are concerns that there may be changes made in the 802.1D-2004
   edition that would lead to non-backward-compatible SMI changes for
   802.1t and 802.1w managed objects in the MIB modules.  The Bridge MIB
   working group decided to 'freeze' the technical content of the MIB
   modules at a level that is compatible with the 802.1t and 802.1w



RFC 4318                        RSTP MIB                   December 2005


   versions, and leave to the IEEE 802.1 working group any updates
   beyond this.

   For informational purposes only, these are the references for the
   above objects in 802.1D-2004 [802.1D-2004].

   RSTP-MIB Name                       IEEE 802.1D-2004 Reference

   dot1dStp
     dot1dStpVersion                   17.13.4  ForceVersion
     dot1dStpTxHoldCount               17.13.12 TxHoldCount
     dot1dStpExtPortTable
       dot1dStpPortProtocolMigration   17.19.13 mcheck
       dot1dStpPortAdminEdgePort       17.13.1  adminEdgePort
       dot1dStpPortOperEdgePort        17.19.17 operEdgePort
       dot1dStpPortAdminPointToPoint   6.4.3    adminPointToPointMAC
       dot1dStpPortOperPointToPoint    6.4.3    operPointToPointMAC
       dot1dStpPortAdminPathCost       17.13.11 Path Cost

4.  Relation to the BRIDGE-MIB

   The objects in the RSTP-MIB supplement those defined in the Bridge
   MIB [RFC4188].

   The Original BRIDGE-MIB [RFC1493] has been updated in an SMIv2-
   compliant version [RFC4188].  Conformance statements have been added
   and some description and reference clauses have been updated.  The
   interpretations of some objects were changed to accommodate IEEE
   802.1t and 802.1w amendments.

   The object dot1dStpPortPathCost32 was added to support IEEE 802.1t,
   and the permissible values of dot1dStpPriority and
   dot1dStpPortPriority have been clarified for bridges supporting IEEE
   802.1t or IEEE 802.1w.  The interpretation of
   dot1dStpTimeSinceTopologyChange has been clarified for bridges
   supporting the RSTP.

   See the updated BRIDGE-MIB [RFC4188] for details.

5.  Definitions for RSTP-MIB

   RSTP-MIB DEFINITIONS ::= BEGIN

   -- -------------------------------------------------------------
   -- MIB for IEEE 802.1w Rapid Spanning Tree Protocol
   -- -------------------------------------------------------------

   IMPORTS



RFC 4318                        RSTP MIB                   December 2005


       MODULE-IDENTITY, OBJECT-TYPE, Integer32, mib-2
           FROM SNMPv2-SMI
       TruthValue
           FROM SNMPv2-TC
       MODULE-COMPLIANCE, OBJECT-GROUP
           FROM SNMPv2-CONF
       dot1dStp, dot1dStpPortEntry
           FROM BRIDGE-MIB;

   rstpMIB MODULE-IDENTITY
       LAST-UPDATED "200512070000Z"
       ORGANIZATION "IETF Bridge MIB Working Group"
       CONTACT-INFO
           "Email: Bridge-mib@ietf.org"
       DESCRIPTION
           "The Bridge MIB Extension module for managing devices
            that support the Rapid Spanning Tree Protocol defined
            by IEEE 802.1w.

            Copyright (C) The Internet Society (2005).  This version of
            this MIB module is part of RFC 4318; See the RFC itself for
            full legal notices."

       REVISION     "200512070000Z"
       DESCRIPTION
            "The initial version of this MIB module as published in
             RFC 4318."
       ::= { mib-2 134 }

   -- ---------------------------------------------------------- --
   -- subtrees in the RSTP-MIB
   -- ---------------------------------------------------------- --

   rstpNotifications OBJECT IDENTIFIER ::= { rstpMIB 0 }
   rstpObjects       OBJECT IDENTIFIER ::= { rstpMIB 1 }
   rstpConformance   OBJECT IDENTIFIER ::= { rstpMIB 2 }

   -- -------------------------------------------------------------
   -- Addition to the dot1dStp group
   -- -------------------------------------------------------------

   dot1dStpVersion OBJECT-TYPE
       SYNTAX      INTEGER {
                       stpCompatible(0),
                       rstp(2)
                   }
       MAX-ACCESS  read-write
       STATUS      current



RFC 4318                        RSTP MIB                   December 2005


       DESCRIPTION
           "The version of Spanning Tree Protocol the bridge is
            currently running.  The value 'stpCompatible(0)'
            indicates the Spanning Tree Protocol specified in
            IEEE 802.1D-1998 and 'rstp(2)' indicates the Rapid
            Spanning Tree Protocol specified in IEEE 802.1w and
            clause 17 of 802.1D-2004.  The values are directly from
            the IEEE standard.  New values may be defined as future
            versions of the protocol become available.

            The value of this object MUST be retained across
            reinitializations of the management system."
       REFERENCE
           "IEEE 802.1w clause 14.8.1, 17.12, 17.16.1"
       DEFVAL      { rstp }
       ::= { dot1dStp 16 }

   dot1dStpTxHoldCount OBJECT-TYPE
       SYNTAX      Integer32 (1..10)
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
           "The value used by the Port Transmit state machine to limit
            the maximum transmission rate.

            The value of this object MUST be retained across
            reinitializations of the management system."

       REFERENCE
           "IEEE 802.1w clause 17.16.6"
       DEFVAL      { 3 }
       ::= { dot1dStp 17 }

   --
   -- { dot1dStp 18 } was used to represent dot1dStpPathCostDefault
   -- in an earlier version of this MIB.  It has since been
   -- obsoleted, and should not be used.
   --

   dot1dStpExtPortTable OBJECT-TYPE
       SYNTAX      SEQUENCE OF Dot1dStpExtPortEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
           "A table that contains port-specific Rapid Spanning Tree
            information."
       ::= { dot1dStp 19 }




RFC 4318                        RSTP MIB                   December 2005


   dot1dStpExtPortEntry OBJECT-TYPE
       SYNTAX      Dot1dStpExtPortEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
           "A list of Rapid Spanning Tree information maintained by
            each port."
       AUGMENTS    { dot1dStpPortEntry }
       ::= { dot1dStpExtPortTable 1 }

   Dot1dStpExtPortEntry ::=
       SEQUENCE {
           dot1dStpPortProtocolMigration
               TruthValue,
           dot1dStpPortAdminEdgePort
               TruthValue,
           dot1dStpPortOperEdgePort
               TruthValue,
           dot1dStpPortAdminPointToPoint
               INTEGER,
           dot1dStpPortOperPointToPoint
               TruthValue,
           dot1dStpPortAdminPathCost
               Integer32
       }

   dot1dStpPortProtocolMigration OBJECT-TYPE
       SYNTAX      TruthValue
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
           "When operating in RSTP (version 2) mode, writing true(1)
            to this object forces this port to transmit RSTP BPDUs.
            Any other operation on this object has no effect and
            it always returns false(2) when read."
       REFERENCE
           "IEEE 802.1w clause 14.8.2.4, 17.18.10, 17.26"
       ::= { dot1dStpExtPortEntry 1 }

   dot1dStpPortAdminEdgePort OBJECT-TYPE
       SYNTAX      TruthValue
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
           "The administrative value of the Edge Port parameter.  A
            value of true(1) indicates that this port should be
            assumed as an edge-port, and a value of false(2) indicates
            that this port should be assumed as a non-edge-port.



RFC 4318                        RSTP MIB                   December 2005


            Setting this object will also cause the corresponding
            instance of dot1dStpPortOperEdgePort to change to the
            same value.  Note that even when this object's value
            is true, the value of the corresponding instance of
            dot1dStpPortOperEdgePort can be false if a BPDU has
            been received.

            The value of this object MUST be retained across
            reinitializations of the management system."

       REFERENCE
           "IEEE 802.1t clause 14.8.2, 18.3.3"
       ::= { dot1dStpExtPortEntry 2 }

   dot1dStpPortOperEdgePort OBJECT-TYPE
       SYNTAX      TruthValue
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
           "The operational value of the Edge Port parameter.  The
            object is initialized to the value of the corresponding
            instance of dot1dStpPortAdminEdgePort.  When the
            corresponding instance of dot1dStpPortAdminEdgePort is
            set, this object will be changed as well.  This object
            will also be changed to false on reception of a BPDU."

       REFERENCE
           "IEEE 802.1t clause 14.8.2, 18.3.4"
       ::= { dot1dStpExtPortEntry 3 }

   dot1dStpPortAdminPointToPoint OBJECT-TYPE
       SYNTAX      INTEGER {
                       forceTrue(0),
                       forceFalse(1),
                       auto(2)
                   }
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
           "The administrative point-to-point status of the LAN segment
            attached to this port, using the enumeration values of the
            IEEE 802.1w clause.  A value of forceTrue(0) indicates
            that this port should always be treated as if it is
            connected to a point-to-point link.  A value of
            forceFalse(1) indicates that this port should be treated as
            having a shared media connection.  A value of auto(2)
            indicates that this port is considered to have a
            point-to-point link if it is an Aggregator and all of its



RFC 4318                        RSTP MIB                   December 2005


            members are aggregatable, or if the MAC entity
            is configured for full duplex operation, either through
            auto-negotiation or by management means.  Manipulating this
            object changes the underlying adminPortToPortMAC.

            The value of this object MUST be retained across
            reinitializations of the management system."

      REFERENCE
          "IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
      ::= { dot1dStpExtPortEntry 4 }

   dot1dStpPortOperPointToPoint OBJECT-TYPE
       SYNTAX      TruthValue
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
           "The operational point-to-point status of the LAN segment
            attached to this port.  It indicates whether a port is
            considered to have a point-to-point connection.
            If adminPointToPointMAC is set to auto(2), then the value
            of operPointToPointMAC is determined in accordance with the
            specific procedures defined for the MAC entity concerned,
            as defined in IEEE 802.1w, clause 6.5.  The value is
            determined dynamically; that is, it is re-evaluated whenever
            the value of adminPointToPointMAC changes, and whenever
            the specific procedures defined for the MAC entity evaluate
            a change in its point-to-point status."
       REFERENCE
           "IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
       ::= { dot1dStpExtPortEntry 5 }

   dot1dStpPortAdminPathCost OBJECT-TYPE
       SYNTAX      Integer32 (0..200000000)
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
           "The administratively assigned value for the contribution
            of this port to the path cost of paths toward the spanning
            tree root.

            Writing a value of '0' assigns the automatically calculated
            default Path Cost value to the port.  If the default Path
            Cost is being used, this object returns '0' when read.

            This complements the object dot1dStpPortPathCost or
            dot1dStpPortPathCost32, which returns the operational value
            of the path cost.



RFC 4318                        RSTP MIB                   December 2005


            The value of this object MUST be retained across
            reinitializations of the management system."
       REFERENCE
           "IEEE 802.1D-1998: Section 8.5.5.3"
       ::= { dot1dStpExtPortEntry 6 }

   -- -------------------------------------------------------------
   -- rstpMIB - Conformance Information
   -- -------------------------------------------------------------

   rstpGroups OBJECT IDENTIFIER ::= { rstpConformance 1 }

   rstpCompliances OBJECT IDENTIFIER ::= { rstpConformance 2 }

   -- -------------------------------------------------------------
   -- Units of conformance
   -- -------------------------------------------------------------

   rstpBridgeGroup OBJECT-GROUP
       OBJECTS {
           dot1dStpVersion,
           dot1dStpTxHoldCount
       }
       STATUS      current
       DESCRIPTION
           "Rapid Spanning Tree information for the bridge."
       ::= { rstpGroups 1 }

   rstpPortGroup OBJECT-GROUP
       OBJECTS {
           dot1dStpPortProtocolMigration,
           dot1dStpPortAdminEdgePort,
           dot1dStpPortOperEdgePort,
           dot1dStpPortAdminPointToPoint,
           dot1dStpPortOperPointToPoint,
           dot1dStpPortAdminPathCost
       }
       STATUS      current
       DESCRIPTION
           "Rapid Spanning Tree information for individual ports."
       ::= { rstpGroups 2 }

   -- -------------------------------------------------------------
   -- Compliance statements
   -- -------------------------------------------------------------

   rstpCompliance MODULE-COMPLIANCE
       STATUS      current



RFC 4318                        RSTP MIB                   December 2005


       DESCRIPTION
           "The compliance statement for device support of Rapid
            Spanning Tree Protocol (RSTP) bridging services."
       MODULE
           MANDATORY-GROUPS {
               rstpBridgeGroup,
               rstpPortGroup
           }
       ::= { rstpCompliances 1 }

   END

6.  Acknowledgements

   This document was produced on behalf of the Bridge MIB Working Group
   in the Operations and Management area of the Internet Engineering
   Task Force.

   The authors wish to thank the members of the Bridge MIB Working
   Group, especially Alex Ruzin, for their comments and suggestions that
   improved this effort.

   Vivian Ngai and Les Bell were the initial authors of this document,
   and did the bulk of the development work for this document.

7.  IANA Considerations

   The IANA has assigned the following OID:

            Descriptor        OBJECT IDENTIFIER value
            ----------        -----------------------
            rstpMIB           { mib-2 134 }

8.  Security Considerations

   There are a number of management objects defined in this MIB module
   with a MAX-ACCESS clause of read-write and/or read-create.  Such
   objects may be considered sensitive or vulnerable in some network
   environments.  The support for SET operations in a non-secure
   environment without proper protection can have a negative effect on
   network operations.  These are the tables and objects and their
   sensitivity/vulnerability:

   Writable objects that could be misused to cause network delays and
   spanning tree instabilities include dot1dStpVersion,
   dot1dStpTxHoldCount, dot1dStpPortProtocolMigration,
   dot1dStpPortAdminEdgePort, and dot1dStpPortAdminPathCost.




RFC 4318                        RSTP MIB                   December 2005


   Some of the readable objects in this MIB module (i.e., objects with a
   MAX-ACCESS other than not-accessible) may be considered sensitive or
   vulnerable in some network environments.  It is thus important to
   control even GET and/or NOTIFY access to these objects and possibly
   to even encrypt the values of these objects when sending them over
   the network via SNMP.  These are the tables and objects and their
   sensitivity/vulnerability:

   dot1dStpVersion could be read by an attacker to identify environments
   containing applications or protocols that are potentially sensitive
   to RSTP mode.

   dot1dStpPortAdminPointToPoint could be used to mislead an access
   control protocol, such as 802.1x, to believe that only one other
   system is attached to a LAN segment and to enable network access
   based on that assumption.  This situation could permit potential
   man-in-the-middle attacks.

   SNMP versions prior to SNMPv3 did not include adequate security.
   Even if the network itself is secure (for example by using IPsec),
   even then, there is no control as to who on the secure network is
   allowed to access and GET/SET (read/change/create/delete) the objects
   in this MIB module.

   It is RECOMMENDED that implementers consider the security features as
   provided by the SNMPv3 framework (see [RFC3410], section 8),
   including full support for the SNMPv3 cryptographic mechanisms (for
   authentication and privacy).

   Further, deployment of SNMP versions prior to SNMPv3 is NOT
   RECOMMENDED.  Instead, it is RECOMMENDED to deploy SNMPv3 and to
   enable cryptographic security.  It is then a customer/operator
   responsibility to ensure that the SNMP entity giving access to an
   instance of this MIB module is properly configured to give access to
   the objects only to those principals (users) that have legitimate
   rights to indeed GET or SET (change/create/delete) them.

9.  Normative References

   [RFC2578]     McCloghrie, K., Perkins, D., and J. Schoenwaelder,
                 "Structure of Management Information Version 2
                 (SMIv2)", STD 58, RFC 2578, April 1999.

   [RFC2579]     McCloghrie, K., Perkins, D., and J. Schoenwaelder,
                 "Textual Conventions for SMIv2", STD 58, RFC 2579,
                 April 1999.





RFC 4318                        RSTP MIB                   December 2005


   [RFC2580]     McCloghrie, K., Perkins, D., and J. Schoenwaelder,
                 "Conformance Statements for SMIv2", STD 58, RFC 2580,
                 April 1999.

   [802.1D-1998] "Information technology - Telecommunications and
                 information exchange between systems - Local and
                 metropolitan area networks - Common specifications -
                 Part 3: Media Access Control (MAC) Bridges:  Revision.
                 This is a revision of ISO/IEC 10038: 1993, 802.1j-1992
                 and 802.6k-1992.  It incorporates P802.11c, P802.1p and
                 P802.12e."  ISO/IEC 15802-3: 1998.

   [RFC4188]     Norseth, K. and E. Bell, "Definitions of Managed
                 Objects for Bridges", RFC 4188, September 2005.

   [802.1t]      IEEE 802.1t-2001, "(Amendment to IEEE Standard 802.1D)
                 IEEE Standard for Information technology -
                 Telecommunications and information exchange between
                 systems - Local and metropolitan area networks - Common
                 specifications - Part 3: Media Access Control (MAC)
                 Bridges: Technical and Editorial Corrections".

   [802.1w]      IEEE 802.1w-2001, "(Amendment to IEEE Standard 802.1D)
                 IEEE Standard for Information technology--
                 Telecommunications and information exchange between
                 systems--Local and metropolitan area networks--Common
                 Specifications--Part 3:  Media Access Control (MAC)
                 Bridges: Rapid Reconfiguation".

10.  Informative References

   [RFC3410]     Case, J., Mundy, R., Partain, D., and B. Stewart,
                 "Introduction and Applicability Statements for
                 Internet-Standard Management Framework", RFC 3410,
                 December 2002.

   [802.1D-2004] IEEE Project 802 Local and Metropolitan Area Networks,
                 "IEEE Standard 802.1D-2004 MAC Bridges", 2004.

   [RFC1493]     Decker, E., Langille, P., Rijsinghani, A., and K.
                 McCloghrie, "Definitions of Managed Objects for
                 Bridges", RFC 1493, July 1993.









RFC 4318                        RSTP MIB                   December 2005


Authors' Addresses

   David Levi
   Nortel Networks
   4655 Great America Parkway
   Santa Clara, CA 95054
   USA

   Phone: +1 408 495 5138
   EMail: dlevi@nortel.com


   David Harrington
   Effective Software
   50 Harding Rd.
   Portsmouth, NH 03801
   USA

   Phone: +1 603 436 8634
   EMail: ietfdbh@comcast.net


   Les Bell
   Hemel Hempstead
   Herts.  HP2 7YU
   UK

   EMail: elbell@ntlworld.com


   Vivian Ngai
   Salt lake City, UT
   USA

   EMail: vivian_ngai@acm.org
















RFC 4318                        RSTP MIB                   December 2005


Full Copyright Statement

   Copyright (C) The Internet Society (2005).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at ietf-
   ipr@ietf.org.

Acknowledgement

   Funding for the RFC Editor function is currently provided by the
   Internet Society.