Rfc7643
TitleSystem for Cross-domain Identity Management: Core Schema
AuthorP. Hunt, Ed., K. Grizzle, E. Wahlstroem, C. Mortimore
DateSeptember 2015
Format:TXT, HTML
Status:PROPOSED STANDARD






Internet Engineering Task Force (IETF)                      P. Hunt, Ed.
Request for Comments: 7643                                        Oracle
Category: Standards Track                                     K. Grizzle
ISSN: 2070-1721                                                SailPoint
                                                           E. Wahlstroem
                                                        Nexus Technology
                                                            C. Mortimore
                                                              Salesforce
                                                          September 2015


        System for Cross-domain Identity Management: Core Schema

Abstract

   The System for Cross-domain Identity Management (SCIM) specifications
   are designed to make identity management in cloud-based applications
   and services easier.  The specification suite builds upon experience
   with existing schemas and deployments, placing specific emphasis on
   simplicity of development and integration, while applying existing
   authentication, authorization, and privacy models.  Its intent is to
   reduce the cost and complexity of user management operations by
   providing a common user schema and extension model as well as binding
   documents to provide patterns for exchanging this schema using HTTP.

   This document provides a platform-neutral schema and extension model
   for representing users and groups and other resource types in JSON
   format.  This schema is intended for exchange and use with cloud
   service providers.

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 5741.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   http://www.rfc-editor.org/info/rfc7643.








RFC 7643                    SCIM Core Schema              September 2015


Copyright Notice

   Copyright (c) 2015 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1. Introduction and Overview .......................................3
      1.1. Requirements Notation and Conventions ......................4
      1.2. Definitions ................................................5
   2. SCIM Schema .....................................................6
      2.1. Attributes .................................................7
      2.2. Attribute Characteristics ..................................8
      2.3. Attribute Data Types .......................................8
           2.3.1. String ..............................................9
           2.3.2. Boolean .............................................9
           2.3.3. Decimal ............................................10
           2.3.4. Integer ............................................10
           2.3.5. DateTime ...........................................10
           2.3.6. Binary .............................................10
           2.3.7. Reference ..........................................10
           2.3.8. Complex ............................................11
      2.4. Multi-Valued Attributes ...................................11
      2.5. Unassigned and Null Values ................................13
   3. SCIM Resources .................................................13
      3.1. Common Attributes .........................................16
      3.2. Defining New Resource Types ...............................18
      3.3. Attribute Extensions to Resources .........................18
   4. SCIM Core Resources and Extensions .............................19
      4.1. "User" Resource Schema ....................................19
           4.1.1. Singular Attributes ................................19
           4.1.2. Multi-Valued Attributes ............................23
      4.2. "Group" Resource Schema ...................................25
      4.3. Enterprise User Schema Extension ..........................26
   5. Service Provider Configuration Schema ..........................27
   6. ResourceType Schema ............................................29
   7. Schema Definition ..............................................30




RFC 7643                    SCIM Core Schema              September 2015


   8. JSON Representation ............................................34
      8.1. Minimal User Representation ...............................34
      8.2. Full User Representation ..................................35
      8.3. Enterprise User Extension Representation ..................39
      8.4. Group Representation ......................................43
      8.5. Service Provider Configuration Representation .............44
      8.6. Resource Type Representation ..............................46
      8.7. Schema Representation .....................................47
           8.7.1. Resource Schema Representation .....................47
           8.7.2. Service Provider Schema Representation .............74
   9. Security Considerations ........................................92
      9.1. Protocol ..................................................92
      9.2. Passwords and Other Sensitive Security Data ...............92
      9.3. Privacy ...................................................92
   10. IANA Considerations ...........................................94
      10.1. Registration of SCIM URN Sub-namespace and SCIM
            Registry .................................................94
      10.2. URN Sub-namespace for SCIM ...............................94
           10.2.1. Specification Template ............................95
      10.3. Registering SCIM Schemas .................................97
           10.3.1. Registration Procedure ............................97
           10.3.2. Schema Registration Template ......................98
      10.4. Initial SCIM Schema Registry .............................99
   11. References ...................................................100
      11.1. Normative References ....................................100
      11.2. Informative References ..................................101
   Acknowledgements .................................................103
   Authors' Addresses ...............................................104

1.  Introduction and Overview

   While there are existing standards for describing and exchanging user
   information, many of these standards can be difficult to implement
   and/or use; e.g., their wire protocols do not easily traverse
   firewalls and/or are not easily layered onto existing web protocols.
   As a result, many cloud providers implement non-standardized
   protocols for managing users within their services.  This increases
   both the cost and complexity associated with organizations adopting
   products and services from multiple cloud providers, as they must
   perform redundant integration development.  Similarly, cloud service
   providers seeking to interoperate with multiple application
   marketplaces or cloud identity providers would require pairwise
   integration.

   SCIM seeks to simplify this problem through an easily implemented
   specification suite that provides a common user schema and extension
   model, as well as a SCIM protocol document that defines exchanging
   this schema via an HTTP-based protocol [RFC7644].  The SCIM



RFC 7643                    SCIM Core Schema              September 2015


   specifications draw design input and feedback from existing
   identity-related protocols and schemas from a wide variety of sources
   including, but not limited to, existing services exposed by cloud
   providers, PortableContacts [PortableContacts], vCards [RFC6350], and
   Lightweight Directory Access Protocol (LDAP) directory services
   [RFC4512].

   The SCIM protocol is an application-level protocol for provisioning
   and managing identity data specified through SCIM schemas.  The
   protocol supports creation, modification, retrieval, and discovery of
   core identity resources such as Users and Groups, using a subset of
   the HTTP methods (GET for retrieval of resources; POST for creation,
   searching, and bulk modification; PUT for attribute replacement
   within resources; PATCH for partial update of attributes; and DELETE
   for removing resources).

   While the SCIM protocol and core schema specifications are intended
   to cover point-to-point scenarios, implementers and deployers should
   consider multi-hop and multi-party scenarios such as a service
   provider acting as a general profile service for in-domain
   applications (e.g., a directory), as well as scenarios where a
   service provider in turn passes information to a third-party service
   provider by acting as either a SCIM client or a SCIM service
   provider.  Implementers and deployers should carefully consider their
   service level agreements and privacy agreements when distributing or
   propagating personal information (see Section 9.3).

   This document provides a JSON-based schema and extension model for
   representing users and groups, as well as service provider
   configuration.  This schema is intended for exchange and use with
   cloud service providers and other cross-domain scenarios.

1.1.  Requirements Notation and Conventions

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

   The key words "REQUIRED" and "OPTIONAL" are used throughout this
   document to indicate whether an attribute or schema element is
   required or optional.  These key words may be used alone (e.g.,
   "REQUIRED.") or in a sentence.  If not specified, an attribute is
   considered to be optional.

   The word "DEFAULT" as used in Section 7 indicates that a "keyword"
   value for an attribute characteristic is the default behavior.





RFC 7643                    SCIM Core Schema              September 2015


   Throughout this document, values are quoted to indicate that they are
   to be taken literally.  When using these values in protocol messages,
   the quotes MUST NOT be used as part of the value.

   Throughout this document, figures may contain spaces and extra line
   wrapping to improve readability and accommodate space limitations.
   Similarly, some URIs contained within examples have been shortened
   for space and readability reasons.

1.2.  Definitions

   Service Provider
      An HTTP web application that provides identity information via the
      SCIM protocol.

   Client
      A website or application that uses the SCIM protocol to manage
      identity data maintained by the service provider.  The client
      initiates SCIM HTTP requests to a target service provider.

   Provisioning Domain
      A provisioning domain is an administrative domain external to the
      domain of a service provider for legal or technical reasons.  For
      example, a SCIM client in an enterprise (provisioning client)
      communicates with a SCIM service provider that is owned or
      controlled by a different legal entity.

   Resource Type
      A type of a resource that is managed by a service provider.  The
      resource type defines the resource name, endpoint URL, schemas,
      and other metadata that indicate where a resource is managed and
      how it is composed, e.g., "User" or "Group".

   Resource
      An artifact that is managed by a service provider and that
      contains one or more attributes, e.g., "User" or "Group".

   Endpoint
      An endpoint for a service provider is a defined base path relative
      to the service provider's Base URI (see Section 1.3 of [RFC7644]),
      over which SCIM operations may be performed against SCIM
      resources.  For example, assuming that the service provider's Base
      URI is "https://example.com/", "User" resources may be accessed at
      the "https://example.com/Users" or "https://example.com/v2/Users"
      endpoint (see Section 3.13 of [RFC7644] for details regarding
      protocol versioning, e.g., 'v2').  Service provider schemas MAY be
      returned from the "/Schemas" endpoint.




RFC 7643                    SCIM Core Schema              September 2015


   Schema
      A collection of attribute definitions that describe the contents
      of an entire or partial resource, e.g.,
      "urn:ietf:params:scim:schemas:core:2.0:User".  The attribute
      definitions specify the name of the attribute, and metadata such
      as type (e.g., string, binary), cardinality (singular, multi,
      complex), mutability, and returnability.

   Singular Attribute
      A resource attribute that contains 0..1 values, e.g.,
      "displayName".

   Multi-valued Attribute
      A resource attribute that contains 0..n values, e.g., "emails".

   Simple Attribute
      A singular or multi-valued attribute whose value is a primitive,
      e.g., "String".  A simple attribute MUST NOT contain
      sub-attributes.

   Complex Attribute
      A singular or multi-valued attribute whose value is a composition
      of one or more simple attributes; e.g., "addresses" has the
      sub-attributes "streetAddress", "locality", "postalCode", and
      "country".

   Sub-Attribute
      A simple attribute that is contained within a complex attribute.

2.  SCIM Schema

   A SCIM server provides a set of resources, the allowable contents of
   which are defined by a set of schema URIs and a resource type.
   SCIM's schema is not a document-centric one such as with
   [XML-Schema].  Instead, SCIM's support of schema is attribute based,
   where each attribute may have different type, mutability,
   cardinality, or returnability.  Validation of documents and messages
   is always performed by an intended receiver, as specified by the SCIM
   specifications.  Validation is performed by the receiver in the
   context of a SCIM protocol request (see [RFC7644]).  For example, a
   SCIM service provider, upon receiving a request to replace an
   existing resource with a replacement JSON object, evaluates each
   asserted attribute based on its characteristics as defined in the
   relevant schema (e.g., mutability) and decides which attributes may
   be replaced or ignored.






RFC 7643                    SCIM Core Schema              September 2015


   This specification provides a minimal core schema for representing
   users and groups (resources), encompassing common attributes found in
   many existing deployments and schemas.  In addition to the minimal
   core schema, this document also specifies a standardized means by
   which service providers may extend schemas to define new resources
   and attributes in both standardized and service-provider-specific
   cases.

   Resources are categorized into common resource types such as "User"
   or "Group".  Collections of resources of the same type are usually
   contained within the same "container" ("folder") endpoint.

2.1.  Attributes

   A resource is a collection of attributes identified by one or more
   schemas.  Minimally, an attribute consists of the attribute name and
   at least one simple or complex value, either of which may be
   multi-valued.  For each attribute, a SCIM schema defines the data
   type, plurality, mutability, and other distinguishing features of an
   attribute.

   Attribute names are case insensitive and are often "camel-cased"
   (e.g., "camelCase").  SCIM resources are represented in JSON
   [RFC7159] format and MUST specify schema via the "schemas" attribute
   per Section 3.

   Attribute names MUST conform to the following ABNF rules:

               ATTRNAME   = ALPHA *(nameChar)
               nameChar   = "$" / "-" / "_" / DIGIT / ALPHA

                    Figure 1: ABNF for Attribute Names

   The above rules (and other rules in this specification) use the "Core
   Rules" from ABNF; see Appendix B of [RFC5234].  Unless otherwise
   specified in this document, all ABNF strings are case insensitive and
   the character set for these strings is US-ASCII.  For example, all
   attribute names defined by the above rule are case insensitive.

   When defining attribute names, it should be noted that the hyphen
   ("-") is not permitted in JavaScript attribute names (or in attribute
   names for some other languages).  While there are no known issues
   within HTTP protocol and JSON notation, attribute names containing
   hyphens may need to be escaped when declaring corresponding names of
   JavaScript attributes.






RFC 7643                    SCIM Core Schema              September 2015


2.2.  Attribute Characteristics

   All attributes have a set of characteristics that describe their type
   and handling by a service provider; full definitions may be found in
   Section 7.  The characteristics include:

   o  "required",

   o  "canonicalValues",

   o  "caseExact",

   o  "mutability",

   o  "returned",

   o  "uniqueness", and

   o  "referenceTypes".

   If not otherwise stated in Section 7, SCIM attributes have the
   following characteristics:

   o  "required" is "false" (i.e., not REQUIRED),

   o  "canonicalValues": none assigned (for example, the "type"
      sub-attribute as described in Section 2.4),

   o  "caseExact" is "false" (i.e., case-insensitive),

   o  "mutability" is "readWrite" (i.e., modifiable),

   o  "returned" is "default" (the attribute value is returned by
      default),

   o  "uniqueness" is "none" (has no uniqueness enforced), and

   o  "type" is "string" (Section 2.3.1).

2.3.  Attribute Data Types

   Attribute data types are derived from JSON [RFC7159].  The JSON
   format defines a limited set of data types; hence, where appropriate,
   alternate JSON representations derived from XML Schema [XML-Schema]
   are defined below.  SCIM extensions SHOULD NOT introduce new data
   types.





RFC 7643                    SCIM Core Schema              September 2015


   Table 1 maps the following SCIM data types to their corresponding
   SCIM schema type and underlying JSON data type:

   +-----------+-------------+-----------------------------------------+
   | SCIM Data | SCIM Schema | JSON Type                               |
   | Type      | "type"      |                                         |
   +-----------+-------------+-----------------------------------------+
   | String    | "string"    | String per Section 7 of [RFC7159]       |
   |           |             |                                         |
   | Boolean   | "boolean"   | Value per Section 3 of [RFC7159]        |
   |           |             |                                         |
   | Decimal   | "decimal"   | Number per Section 6 of [RFC7159]       |
   |           |             |                                         |
   | Integer   | "integer"   | Number per Section 6 of [RFC7159]       |
   |           |             |                                         |
   | DateTime  | "dateTime"  | String per Section 7 of [RFC7159]       |
   |           |             |                                         |
   | Binary    | "binary"    | Binary value base64 encoded per Section |
   |           |             | 4 of [RFC4648], or with URL and         |
   |           |             | filename safe alphabet URL per Section  |
   |           |             | 5 of [RFC4648] that is passed as a JSON |
   |           |             | string per Section 7 of [RFC7159]       |
   |           |             |                                         |
   | Reference | "reference" | String per Section 7 of [RFC7159]       |
   |           |             |                                         |
   | Complex   | "complex"   | Object per Section 4 of [RFC7159]       |
   +-----------+-------------+-----------------------------------------+

              Table 1: SCIM Data Type to JSON Representation

2.3.1.  String

   A sequence of zero or more Unicode characters encoded using UTF-8 as
   per [RFC2277] and [RFC3629].  The JSON format is defined in Section 7
   of [RFC7159].  An attribute with SCIM schema type "string" MAY
   specify a required data format.  Additionally, when "canonicalValues"
   is specified, service providers MAY restrict accepted values to the
   specified values.

2.3.2.  Boolean

   The literal "true" or "false".  The JSON format is defined in
   Section 3 of [RFC7159].  A boolean has no case sensitivity or
   uniqueness.







RFC 7643                    SCIM Core Schema              September 2015


2.3.3.  Decimal

   A real number with at least one digit to the left and right of the
   period.  The JSON format is defined in Section 6 of [RFC7159].  A
   decimal has no case sensitivity.

2.3.4.  Integer

   A whole number with no fractional digits or decimal.  The JSON format
   is defined in Section 6 of [RFC7159], with the additional constraint
   that the value MUST NOT contain fractional or exponent parts.  An
   integer has no case sensitivity.

2.3.5.  DateTime

   A DateTime value (e.g., 2008-01-23T04:56:22Z).  The attribute value
   MUST be encoded as a valid xsd:dateTime as specified in Section 3.3.7
   of [XML-Schema] and MUST include both a date and a time.  A date time
   format has no case sensitivity or uniqueness.

   Values represented in JSON format MUST conform to the XML constraints
   above and are represented as a JSON string per Section 7 of
   [RFC7159].

2.3.6.  Binary

   Arbitrary binary data.  The attribute value MUST be base64 encoded as
   specified in Section 4 of [RFC4648].  In cases where a URL-safe
   encoding is required, the attribute definition MAY specify that
   base64 URL encoding be used as per Section 5 of [RFC4648].  Unless
   otherwise specified in the attribute definition, trailing padding
   characters MAY be omitted ("=").

   In JSON representation, the encoded values are represented as a JSON
   string per Section 7 of [RFC7159].  A binary is case exact and has no
   uniqueness.

2.3.7.  Reference

   A URI for a resource.  A resource MAY be a SCIM resource, an external
   link to a resource (e.g., a photo), or an identifier such as a URN.
   The value MUST be the absolute or relative URI of the target
   resource.  Relative URIs should be resolved as specified in
   Section 5.2 of [RFC3986].  However, the base URI for relative URI
   resolution MUST include all URI components and path segments up to,
   but not including, the Endpoint URI (the SCIM service provider root





RFC 7643                    SCIM Core Schema              September 2015


   endpoint); e.g., the base URI for a request to
   "https://example.com/v2/Users/2819c223-7f76-453a-919d-413861904646"
   would be "https://example.com/v2/", and the relative URI for this
   resource would be "Users/2819c223-7f76-453a-919d-413861904646".

   In JSON representation, the URI value is represented as a JSON string
   per Section 7 of [RFC7159].  A reference is case exact.  A reference
   has a "referenceTypes" attribute that indicates what types of
   resources may be linked, as per Section 7 of this document.

   A reference URI MUST be to an HTTP-addressable resource.  An HTTP
   client performing a GET operation on a reference URI MUST receive the
   target resource or an appropriate HTTP response code.  A SCIM service
   provider MAY choose to enforce referential integrity for reference
   types referring to SCIM resources.

   By convention, a reference is commonly represented as a "$ref"
   sub-attribute in complex or multi-valued attributes; however, this is
   OPTIONAL.

2.3.8.  Complex

   A singular or multi-valued attribute whose value is a composition of
   one or more simple attributes.  The JSON format is defined in
   Section 4 of [RFC7159].  The order of the component attributes is not
   significant.  Servers and clients MUST NOT require or expect
   attributes to be in any specific order when an object is either
   generated or analyzed.  A complex attribute has no uniqueness or case
   sensitivity.  A complex attribute MUST NOT contain sub-attributes
   that have sub-attributes (i.e., that are complex).

2.4.  Multi-Valued Attributes

   Multi-valued attributes contain a list of elements using the JSON
   array format defined in Section 5 of [RFC7159].  Elements can be
   either of the following:

   o  primitive values, or

   o  objects with a set of sub-attributes and values, using the JSON
      object format defined in Section 4 of [RFC7159], in which case
      they SHALL be considered to be complex attributes.  As with
      complex attributes, the order of sub-attributes is not
      significant.  The predefined sub-attributes listed in this section
      can be used with multi-valued attribute objects, but these
      sub-attributes MUST be used with the meanings defined here.





RFC 7643                    SCIM Core Schema              September 2015


   If not otherwise defined, the default set of sub-attributes for a
   multi-valued attribute is as follows:

   type
      A label indicating the attribute's function, e.g., "work" or
      "home".

   primary
      A Boolean value indicating the 'primary' or preferred attribute
      value for this attribute, e.g., the preferred mailing address or
      the primary email address.  The primary attribute value "true"
      MUST appear no more than once.  If not specified, the value of
      "primary" SHALL be assumed to be "false".

   display
      A human-readable name, primarily used for display purposes and
      having a mutability of "immutable".

   value
      The attribute's significant value, e.g., email address, phone
      number.

   $ref
      The reference URI of a target resource, if the attribute is a
      reference.  URIs are canonicalized per Section 6.2 of [RFC3986].
      While the representation of a resource may vary in different SCIM
      protocol API versions (see Section 3.13 of [RFC7644]), URIs for
      SCIM resources with an API version SHALL be considered comparable
      to URIs without a version or with a different version.  For
      example, "https://example.com/Users/12345" is equivalent to
      "https://example.com/v2/Users/12345".

   When returning multi-valued attributes, service providers SHOULD
   canonicalize the value returned (e.g., by returning a value for the
   sub-attribute "type", such as "home" or "work") when appropriate
   (e.g., for email addresses and URLs).

   Service providers MAY return element objects with the same "value"
   sub-attribute more than once with a different "type" sub-attribute
   (e.g., the same email address may be used for work and home) but
   SHOULD NOT return the same (type, value) combination more than once
   per attribute, as this complicates processing by the client.

   When defining schema for multi-valued attributes, it is considered a
   good practice to provide a type attribute that MAY be used for the
   purpose of canonicalization of values.  In the schema definition for
   an attribute, the service provider MAY define the recommended
   canonical values (see Section 7).



RFC 7643                    SCIM Core Schema              September 2015


2.5.  Unassigned and Null Values

   Unassigned attributes, the null value, or an empty array (in the case
   of a multi-valued attribute) SHALL be considered to be equivalent in
   "state".  Assigning an attribute with the value "null" or an empty
   array (in the case of multi-valued attributes) has the effect of
   making the attribute "unassigned".  When a resource is expressed in
   JSON format, unassigned attributes, although they are defined in
   schema, MAY be omitted for compactness.

3.  SCIM Resources

   Each SCIM resource is a JSON object that has the following
   components:

   Resource Type
      Each resource (or JSON object) in SCIM has a resource type
      ("meta.resourceType"; see Section 3.1) that defines the resource's
      core attribute schema and any attribute extension schema, as well
      as the endpoint where objects of the same type may be found.  More
      information about a resource MAY be found in its resource type
      definition (see Section 6).

   "Schemas" Attribute
      The "schemas" attribute is a REQUIRED attribute and is an array of
      Strings containing URIs that are used to indicate the namespaces
      of the SCIM schemas that define the attributes present in the
      current JSON structure.  This attribute may be used by parsers to
      define the attributes present in the JSON structure that is the
      body to an HTTP request or response.  Each String value must be a
      unique URI.  All representations of SCIM schemas MUST include a
      non-empty array with value(s) of the URIs supported by that
      representation.  The "schemas" attribute for a resource MUST only
      contain values defined as "schema" and "schemaExtensions" for the
      resource's defined "resourceType".  Duplicate values MUST NOT be
      included.  Value order is not specified and MUST NOT impact
      behavior.

   Common Attributes
      A resource's common attributes are those attributes that are part
      of every SCIM resource, regardless of the value of the "schemas"
      attribute present in a JSON body.  These attributes are not
      defined in any particular schema but SHALL be assumed to be
      present in every resource, regardless of the value of the
      "schemas" attribute.  See Section 3.1.






RFC 7643                    SCIM Core Schema              September 2015


   Core Attributes
      A resource's core attributes are those attributes that sit at the
      top level of the JSON object together with the common attributes
      (such as the resource "id").  The list of valid attributes is
      specified by the resource's resource type "schema" attribute (see
      Section 6).  This same value is also present in the resource's
      "schemas" attribute.

   Extended Attributes
      Extended schema attributes are specified by the resource's
      resource type "schemaExtensions" attribute (see Section 6).
      Unlike core attributes, extended attributes are kept in their own
      sub-attribute namespace identified by the schema extension URI.
      This avoids attribute name conflicts that may arise due to
      conflicts from separate schema extensions.




































RFC 7643                    SCIM Core Schema              September 2015


   The following example "User" contains the common attributes "id" and
   "externalId", as well as the complex attribute "meta", which contains
   the sub-attribute "resourceType".  The resource also contains core
   attributes "userName" and "name", as well as extended enterprise User
   attributes "employeeNumber" and "costCenter", which are contained in
   their own JSON substructure identified by their schema URI.  Some
   values have been omitted (...), shortened, or spaced out for clarity.

   {
     "schemas":
       ["urn:ietf:params:scim:schemas:core:2.0:User",
         "urn:ietf:params:scim:schemas:extension:enterprise:2.0:User"],

     "id": "2819c223-7f76-453a-413861904646",
     "externalId": "701984",

     "userName": "bjensen@example.com",
     "name": {
       "formatted": "Ms. Barbara J Jensen, III",
       "familyName": "Jensen",
       "givenName": "Barbara",
       "middleName": "Jane",
       "honorificPrefix": "Ms.",
       "honorificSuffix": "III"
     },
    ...

     "urn:ietf:params:scim:schemas:extension:enterprise:2.0:User": {
       "employeeNumber": "701984",
       "costCenter": "4130",
       ...
     },

     "meta": {
       "resourceType": "User",
       "created": "2010-01-23T04:56:22Z",
       "lastModified": "2011-05-13T04:42:34Z",
       "version": "W\/\"3694e05e9dff591\"",
       "location":
         "https://example.com/v2/Users/2819c223-7f76-453a-413861904646"
     }
   }

                 Figure 2: Example JSON Resource Structure







RFC 7643                    SCIM Core Schema              September 2015


3.1.  Common Attributes

   Each SCIM resource (Users, Groups, etc.) includes the following
   common attributes.  With the exception of the "ServiceProviderConfig"
   and "ResourceType" server discovery endpoints and their associated
   resources, these attributes MUST be defined for all resources,
   including any extended resource types.  When accepted by a service
   provider (e.g., after a SCIM create), the attributes "id" and "meta"
   (and its associated sub-attributes) MUST be assigned values by the
   service provider.  Common attributes are considered to be part of
   every base resource schema and do not use their own "schemas" URI.

   For backward compatibility, some existing schema definitions MAY list
   common attributes as part of the schema.  The attribute
   characteristics (see Section 2.2) listed here SHALL take precedence
   over older definitions that may be included in existing schemas.

   id
      A unique identifier for a SCIM resource as defined by the service
      provider.  Each representation of the resource MUST include a
      non-empty "id" value.  This identifier MUST be unique across the
      SCIM service provider's entire set of resources.  It MUST be a
      stable, non-reassignable identifier that does not change when the
      same resource is returned in subsequent requests.  The value of
      the "id" attribute is always issued by the service provider and
      MUST NOT be specified by the client.  The string "bulkId" is a
      reserved keyword and MUST NOT be used within any unique identifier
      value.  The attribute characteristics are "caseExact" as "true", a
      mutability of "readOnly", and a "returned" characteristic of
      "always".  See Section 9 for additional considerations regarding
      privacy.

   externalId
      A String that is an identifier for the resource as defined by the
      provisioning client.  The "externalId" may simplify identification
      of a resource between the provisioning client and the service
      provider by allowing the client to use a filter to locate the
      resource with an identifier from the provisioning domain,
      obviating the need to store a local mapping between the
      provisioning domain's identifier of the resource and the
      identifier used by the service provider.  Each resource MAY
      include a non-empty "externalId" value.  The value of the
      "externalId" attribute is always issued by the provisioning client
      and MUST NOT be specified by the service provider.  The service
      provider MUST always interpret the externalId as scoped to the
      provisioning domain.  While the server does not enforce
      uniqueness, it is assumed that the value's uniqueness is
      controlled by the client setting the value.  See Section 9 for



RFC 7643                    SCIM Core Schema              September 2015


      additional considerations regarding privacy.  This attribute has
      "caseExact" as "true" and a mutability of "readWrite".  This
      attribute is OPTIONAL.

   meta
      A complex attribute containing resource metadata.  All "meta"
      sub-attributes are assigned by the service provider (have a
      "mutability" of "readOnly"), and all of these sub-attributes have
      a "returned" characteristic of "default".  This attribute SHALL be
      ignored when provided by clients.  "meta" contains the following
      sub-attributes:

      resourceType  The name of the resource type of the resource.  This
         attribute has a mutability of "readOnly" and "caseExact" as
         "true".

      created  The "DateTime" that the resource was added to the service
         provider.  This attribute MUST be a DateTime.

      lastModified  The most recent DateTime that the details of this
         resource were updated at the service provider.  If this
         resource has never been modified since its initial creation,
         the value MUST be the same as the value of "created".

      location  The URI of the resource being returned.  This value MUST
         be the same as the "Content-Location" HTTP response header (see
         Section 3.1.4.2 of [RFC7231]).

      version  The version of the resource being returned.  This value
         must be the same as the entity-tag (ETag) HTTP response header
         (see Sections 2.1 and 2.3 of [RFC7232]).  This attribute has
         "caseExact" as "true".  Service provider support for this
         attribute is optional and subject to the service provider's
         support for versioning (see Section 3.14 of [RFC7644]).  If a
         service provider provides "version" (entity-tag) for a
         representation and the generation of that entity-tag does not
         satisfy all of the characteristics of a strong validator (see
         Section 2.1 of [RFC7232]), then the origin server MUST mark the
         "version" (entity-tag) as weak by prefixing its opaque value
         with "W/" (case sensitive).











RFC 7643                    SCIM Core Schema              September 2015


3.2.  Defining New Resource Types

   SCIM may be extended to define new classes of resources by defining a
   resource type.  Each resource type defines the name, endpoint, base
   schema (the attributes), and any schema extensions registered for use
   with the resource type.  In order to offer new types of resources, a
   service provider defines the new resource type as specified in
   Section 6 and defines a schema representation (see Section 8.7).

3.3.  Attribute Extensions to Resources

   SCIM allows resource types to have extensions in addition to their
   core schema.  This is similar to how "objectClasses" are used in LDAP
   [RFC4512].  However, unlike LDAP, there is no inheritance model; all
   extensions are additive (similar to the LDAP auxiliary object class).
   Each value in the "schemas" attribute indicates additive schema that
   MAY exist in a SCIM resource representation.  The "schemas" attribute
   MUST contain at least one value, which SHALL be the base schema for
   the resource.  The "schemas" attribute MAY contain additional values
   indicating extended schemas that are in use.  Schema extensions
   SHOULD avoid redefining any attributes defined in this specification
   and SHOULD follow conventions defined in this specification.  Except
   for the base object schema, the schema extension URI SHALL be used as
   a JSON container to distinguish attributes belonging to the extension
   namespace from base schema attributes.  See Figure 5, which is an
   example of the JSON representation of an enterprise User and is also
   an example of a User with extended schema.

   In order to determine which URI value in the "schemas" attribute is
   the base schema and which is an extended schema for any given
   resource, the resource's "resourceType" attribute value MAY be used
   to retrieve the resource's "ResourceType" schema (see Section 6).
   See the "ResourceType" representation in Figure 8 for an example.


















RFC 7643                    SCIM Core Schema              September 2015


4.  SCIM Core Resources and Extensions

   This section defines the default resource schemas present in a SCIM
   server.  SCIM is not exclusive to these resources and may be extended
   to support other resource types (see Section 3.2).

4.1.  "User" Resource Schema

   SCIM provides a resource type for "User" resources.  The core schema
   for "User" is identified using the following schema URI:
   "urn:ietf:params:scim:schemas:core:2.0:User".  The following
   attributes are defined in addition to the core schema attributes:

4.1.1.  Singular Attributes

   userName
      A service provider's unique identifier for the user, typically
      used by the user to directly authenticate to the service provider.
      Often displayed to the user as their unique identifier within the
      system (as opposed to "id" or "externalId", which are generally
      opaque and not user-friendly identifiers).  Each User MUST include
      a non-empty userName value.  This identifier MUST be unique across
      the service provider's entire set of Users.  This attribute is
      REQUIRED and is case insensitive.

   name
      The components of the user's name.  Service providers MAY return
      just the full name as a single string in the formatted
      sub-attribute, or they MAY return just the individual component
      attributes using the other sub-attributes, or they MAY return
      both.  If both variants are returned, they SHOULD be describing
      the same name, with the formatted name indicating how the
      component attributes should be combined.

      formatted  The full name, including all middle names, titles, and
         suffixes as appropriate, formatted for display (e.g.,
         "Ms. Barbara Jane Jensen, III").

      familyName  The family name of the User, or last name in most
         Western languages (e.g., "Jensen" given the full name
         "Ms. Barbara Jane Jensen, III").

      givenName  The given name of the User, or first name in most
         Western languages (e.g., "Barbara" given the full name
         "Ms. Barbara Jane Jensen, III").

      middleName  The middle name(s) of the User (e.g., "Jane" given the
         full name "Ms. Barbara Jane Jensen, III").



RFC 7643                    SCIM Core Schema              September 2015


      honorificPrefix  The honorific prefix(es) of the User, or title in
         most Western languages (e.g., "Ms." given the full name
         "Ms. Barbara Jane Jensen, III").

      honorificSuffix  The honorific suffix(es) of the User, or suffix
         in most Western languages (e.g., "III" given the full name
         "Ms. Barbara Jane Jensen, III").

   displayName
      The name of the user, suitable for display to end-users.  Each
      user returned MAY include a non-empty displayName value.  The name
      SHOULD be the full name of the User being described, if known
      (e.g., "Babs Jensen" or "Ms. Barbara J Jensen, III") but MAY be a
      username or handle, if that is all that is available (e.g.,
      "bjensen").  The value provided SHOULD be the primary textual
      label by which this User is normally displayed by the service
      provider when presenting it to end-users.

   nickName
      The casual way to address the user in real life, e.g., "Bob" or
      "Bobby" instead of "Robert".  This attribute SHOULD NOT be used to
      represent a User's username (e.g., bjensen or mpepperidge).

   profileUrl
      A URI that is a uniform resource locator (as defined in
      Section 1.1.3 of [RFC3986]) and that points to a location
      representing the user's online profile (e.g., a web page).  URIs
      are canonicalized per Section 6.2 of [RFC3986].

   title
      The user's title, such as "Vice President".

   userType
      Used to identify the relationship between the organization and the
      user.  Typical values used might be "Contractor", "Employee",
      "Intern", "Temp", "External", and "Unknown", but any value may be
      used.

   preferredLanguage
      Indicates the user's preferred written or spoken languages and is
      generally used for selecting a localized user interface.  The
      value indicates the set of natural languages that are preferred.
      The format of the value is the same as the HTTP Accept-Language
      header field (not including "Accept-Language:") and is specified
      in Section 5.3.5 of [RFC7231].  The intent of this value is to
      enable cloud applications to perform matching of language tags
      [RFC4647] to the user's language preferences, regardless of what
      may be indicated by a user agent (which might be shared), or in an



RFC 7643                    SCIM Core Schema              September 2015


      interaction that does not involve a user (such as in a delegated
      OAuth 2.0 [RFC6749] style interaction) where normal HTTP
      Accept-Language header negotiation cannot take place.

   locale
      Used to indicate the User's default location for purposes of
      localizing such items as currency, date time format, or numerical
      representations.  A valid value is a language tag as defined in
      [RFC5646].  Computer languages are explicitly excluded.

      A language tag is a sequence of one or more case-insensitive
      sub-tags, each separated by a hyphen character ("-", %x2D).  For
      backward compatibility, servers MAY accept tags separated by an
      underscore character ("_", %x5F).  In most cases, a language tag
      consists of a primary language sub-tag that identifies a broad
      family of related languages (e.g., "en" = English) and that is
      optionally followed by a series of sub-tags that refine or narrow
      that language's range (e.g., "en-CA" = the variety of English as
      communicated in Canada).  Whitespace is not allowed within a
      language tag.  Example tags include:

           fr, en-US, es-419, az-Arab, x-pig-latin, man-Nkoo-GN

      See [RFC5646] for further information.

   timezone
      The User's time zone, in IANA Time Zone database format [RFC6557],
      also known as the "Olson" time zone database format [Olson-TZ]
      (e.g., "America/Los_Angeles").

   active
      A Boolean value indicating the user's administrative status.  The
      definitive meaning of this attribute is determined by the service
      provider.  As a typical example, a value of true implies that the
      user is able to log in, while a value of false implies that the
      user's account has been suspended.















RFC 7643                    SCIM Core Schema              September 2015


   password
      This attribute is intended to be used as a means to set, replace,
      or compare (i.e., filter for equality) a password.  The cleartext
      value or the hashed value of a password SHALL NOT be returnable by
      a service provider.  If a service provider holds the value
      locally, the value SHOULD be hashed.  When a password is set or
      changed by the client, the cleartext password SHOULD be processed
      by the service provider as follows:

      *  Prepare the cleartext value for international language
         comparison.  See Section 7.8 of [RFC7644].

      *  Validate the value against server password policy.  Note: The
         definition and enforcement of password policy are beyond the
         scope of this document.

      *  Ensure that the value is encrypted (e.g., hashed).  See
         Section 9.2 for acceptable hashing and encryption handling when
         storing or persisting for provisioning workflow reasons.

      A service provider that immediately passes the cleartext value on
      to another system or programming interface MUST pass the value
      directly over a secured connection (e.g., Transport Layer Security
      (TLS)).  If the value needs to be temporarily persisted for a
      period of time (e.g., because of a workflow) before provisioning,
      then the value MUST be protected by some method, such as
      encryption.

      Testing for an equality match MAY be supported if there is an
      existing stored hashed value.  When testing for equality, the
      service provider:

      *  Prepares the filter value for international language
         comparison.  See Section 7.8 of [RFC7644].

      *  Generates the salted hash of the filter value and tests for a
         match with the locally held value.

      The mutability of the password attribute is "writeOnly",
      indicating that the value MUST NOT be returned by a service
      provider in any form (the attribute characteristic "returned" is
      "never").









RFC 7643                    SCIM Core Schema              September 2015


4.1.2.  Multi-Valued Attributes

   The following multi-valued attributes are defined.

   emails
      Email addresses for the User.  The value SHOULD be specified
      according to [RFC5321].  Service providers SHOULD canonicalize the
      value according to [RFC5321], e.g., "bjensen@example.com" instead
      of "bjensen@EXAMPLE.COM".  The "display" sub-attribute MAY be used
      to return the canonicalized representation of the email value.
      The "type" sub-attribute is used to provide a classification
      meaningful to the (human) user.  The user interface should
      encourage the use of basic values of "work", "home", and "other"
      and MAY allow additional type values to be used at the discretion
      of SCIM clients.

   phoneNumbers
      Phone numbers for the user.  The value SHOULD be specified
      according to the format defined in [RFC3966], e.g.,
      'tel:+1-201-555-0123'.  Service providers SHOULD canonicalize the
      value according to [RFC3966] format, when appropriate.  The
      "display" sub-attribute MAY be used to return the canonicalized
      representation of the phone number value.  The sub-attribute
      "type" often has typical values of "work", "home", "mobile",
      "fax", "pager", and "other" and MAY allow more types to be defined
      by the SCIM clients.

   ims
      Instant messaging address for the user.  No official
      canonicalization rules exist for all instant messaging addresses,
      but service providers SHOULD, when appropriate, remove all
      whitespace and convert the address to lowercase.  The "type"
      sub-attribute SHOULD take one of the following values: "aim",
      "gtalk", "icq", "xmpp", "msn", "skype", "qq", "yahoo", or "other"
      (representing currently popular IM services at the time of this
      writing).  Service providers MAY add further values if new IM
      services are introduced and MAY specify more detailed
      canonicalization rules for each possible value.

   photos
      A URI that is a uniform resource locator (as defined in
      Section 1.1.3 of [RFC3986]) that points to a resource location
      representing the user's image.  The resource MUST be a file (e.g.,
      a GIF, JPEG, or PNG image file) rather than a web page containing
      an image.  Service providers MAY return the same image in
      different sizes, although it is recognized that no standard for
      describing images of various sizes currently exists.  Note that
      this attribute SHOULD NOT be used to send down arbitrary photos



RFC 7643                    SCIM Core Schema              September 2015


      taken by this user; instead, profile photos of the user that are
      suitable for display when describing the user should be sent.
      Instead of the standard canonical values for type, this attribute
      defines the following canonical values to represent popular photo
      sizes: "photo" and "thumbnail".

   addresses
      A physical mailing address for this user.  Canonical type values
      of "work", "home", and "other".  This attribute is a complex type
      with the following sub-attributes.  All sub-attributes are
      OPTIONAL.

      formatted  The full mailing address, formatted for display or use
         with a mailing label.  This attribute MAY contain newlines.

      streetAddress  The full street address component, which may
         include house number, street name, P.O. box, and multi-line
         extended street address information.  This attribute MAY
         contain newlines.

      locality  The city or locality component.

      region  The state or region component.

      postalCode  The zip code or postal code component.

      country  The country name component.  When specified, the value
         MUST be in ISO 3166-1 "alpha-2" code format [ISO3166]; e.g.,
         the United States and Sweden are "US" and "SE", respectively.

   groups
      A list of groups to which the user belongs, either through direct
      membership, through nested groups, or dynamically calculated.  The
      values are meant to enable expression of common group-based or
      role-based access control models, although no explicit
      authorization model is defined.  It is intended that the semantics
      of group membership and any behavior or authorization granted as a
      result of membership are defined by the service provider.  The
      canonical types "direct" and "indirect" are defined to describe
      how the group membership was derived.  Direct group membership
      indicates that the user is directly associated with the group and
      SHOULD indicate that clients may modify membership through the
      "Group" resource.  Indirect membership indicates that user
      membership is transitive or dynamic and implies that clients
      cannot modify indirect group membership through the "Group"
      resource but MAY modify direct group membership through the
      "Group" resource, which may influence indirect memberships.  If
      the SCIM service provider exposes a "Group" resource, the "value"



RFC 7643                    SCIM Core Schema              September 2015


      sub-attribute MUST be the "id", and the "$ref" sub-attribute must
      be the URI of the corresponding "Group" resources to which the
      user belongs.  Since this attribute has a mutability of
      "readOnly", group membership changes MUST be applied via the
      "Group" Resource (Section 4.2).  This attribute has a mutability
      of "readOnly".

   entitlements
      A list of entitlements for the user that represent a thing the
      user has.  An entitlement may be an additional right to a thing,
      object, or service.  No vocabulary or syntax is specified; service
      providers and clients are expected to encode sufficient
      information in the value so as to accurately and without ambiguity
      determine what the user has access to.  This value has no
      canonical types, although a type may be useful as a means to scope
      entitlements.

   roles
      A list of roles for the user that collectively represent who the
      user is, e.g., "Student", "Faculty".  No vocabulary or syntax is
      specified, although it is expected that a role value is a String
      or label representing a collection of entitlements.  This value
      has no canonical types.

   x509Certificates
      A list of certificates associated with the resource (e.g., a
      User).  Each value contains exactly one DER-encoded X.509
      certificate (see Section 4 of [RFC5280]), which MUST be base64
      encoded per Section 4 of [RFC4648].  A single value MUST NOT
      contain multiple certificates and so does not contain the encoding
      "SEQUENCE OF Certificate" in any guise.

4.2.  "Group" Resource Schema

   SCIM provides a schema for representing groups, identified using the
   following schema URI: "urn:ietf:params:scim:schemas:core:2.0:Group".

   "Group" resources are meant to enable expression of common
   group-based or role-based access control models, although no explicit
   authorization model is defined.  It is intended that the semantics of
   group membership, and any behavior or authorization granted as a
   result of membership, are defined by the service provider; these are
   considered out of scope for this specification.








RFC 7643                    SCIM Core Schema              September 2015


   The following singular attribute is defined in addition to the common
   attributes defined in the SCIM core schema:

   displayName
      A human-readable name for the Group.  REQUIRED.

   The following multi-valued attribute is defined in addition to the
   common attributes defined in the SCIM core schema:

   members
      A list of members of the Group.  While values MAY be added or
      removed, sub-attributes of members are "immutable".  The "value"
      sub-attribute contains the value of an "id" attribute of a SCIM
      resource, and the "$ref" sub-attribute must be the URI of a SCIM
      resource such as a "User", or a "Group".  The intention of the
      "Group" type is to allow the service provider to support nested
      groups.  Service providers MAY require clients to provide a
      non-empty value by setting the "required" attribute characteristic
      of a sub-attribute of the "members" attribute in the "Group"
      resource schema.

4.3.  Enterprise User Schema Extension

   The following SCIM extension defines attributes commonly used in
   representing users that belong to, or act on behalf of, a business or
   enterprise.  The enterprise User extension is identified using the
   following schema URI:
   "urn:ietf:params:scim:schemas:extension:enterprise:2.0:User".

   The following singular attributes are defined:

   employeeNumber
      A string identifier, typically numeric or alphanumeric, assigned
      to a person, typically based on order of hire or association with
      an organization.

   costCenter
      Identifies the name of a cost center.

   organization
      Identifies the name of an organization.

   division
      Identifies the name of a division.

   department
      Identifies the name of a department.




RFC 7643                    SCIM Core Schema              September 2015


   manager
      The user's manager.  A complex type that optionally allows service
      providers to represent organizational hierarchy by referencing the
      "id" attribute of another User.

      value  The "id" of the SCIM resource representing the user's
         manager.  RECOMMENDED.

      $ref  The URI of the SCIM resource representing the User's
         manager.  RECOMMENDED.

      displayName  The displayName of the user's manager.  This
         attribute is OPTIONAL, and mutability is "readOnly".

5.  Service Provider Configuration Schema

   SCIM provides a schema for representing the service provider's
   configuration, identified using the following schema URI:
   "urn:ietf:params:scim:schemas:core:2.0:ServiceProviderConfig".

   The service provider configuration resource enables a service
   provider to discover SCIM specification features in a standardized
   form as well as provide additional implementation details to clients.
   All attributes have a mutability of "readOnly".  Unlike other core
   resources, the "id" attribute is not required for the service
   provider configuration resource.

   The following singular attributes are defined in addition to the
   common attributes defined in the core schema:

   documentationUri
      An HTTP-addressable URL pointing to the service provider's
      human-consumable help documentation.  OPTIONAL.

   patch
      A complex type that specifies PATCH configuration options.
      REQUIRED.  See Section 3.5.2 of [RFC7644].

      supported  A Boolean value specifying whether or not the operation
         is supported.  REQUIRED.

   bulk
      A complex type that specifies bulk configuration options.  See
      Section 3.7 of [RFC7644].  REQUIRED.

      supported  A Boolean value specifying whether or not the operation
         is supported.  REQUIRED.




RFC 7643                    SCIM Core Schema              September 2015


      maxOperations  An integer value specifying the maximum number of
         operations.  REQUIRED.

      maxPayloadSize  An integer value specifying the maximum payload
         size in bytes.  REQUIRED.

   filter
      A complex type that specifies FILTER options.  REQUIRED.  See
      Section 3.4.2.2 of [RFC7644].

      supported  A Boolean value specifying whether or not the operation
         is supported.  REQUIRED.

      maxResults  An integer value specifying the maximum number of
         resources returned in a response.  REQUIRED.

   changePassword
      A complex type that specifies configuration options related to
      changing a password.  REQUIRED.

      supported  A Boolean value specifying whether or not the operation
         is supported.  REQUIRED.

   sort
      A complex type that specifies Sort configuration options.
      REQUIRED.

      supported  A Boolean value specifying whether or not sorting is
         supported.  REQUIRED.

   etag
      A complex type that specifies ETag configuration options.
      REQUIRED.

      supported  A Boolean value specifying whether or not the operation
         is supported.  REQUIRED.















RFC 7643                    SCIM Core Schema              September 2015


   The following multi-valued attribute is defined in addition to the
   common attributes defined in the core schema:

   authenticationSchemes
      A multi-valued complex type that specifies supported
      authentication scheme properties.  To enable seamless discovery of
      configurations, the service provider SHOULD, with the appropriate
      security considerations, make the authenticationSchemes attribute
      publicly accessible without prior authentication.  REQUIRED.  The
      following sub-attributes are defined:

      type  The authentication scheme.  This specification defines the
         values "oauth", "oauth2", "oauthbearertoken", "httpbasic", and
         "httpdigest".  REQUIRED.

      name  The common authentication scheme name, e.g., HTTP Basic.
         REQUIRED.

      description  A description of the authentication scheme.
         REQUIRED.

      specUri  An HTTP-addressable URL pointing to the authentication
         scheme's specification.  OPTIONAL.

      documentationUri  An HTTP-addressable URL pointing to the
         authentication scheme's usage documentation.  OPTIONAL.

6.  ResourceType Schema

   The "ResourceType" schema specifies the metadata about a resource
   type.  Resource type resources are READ-ONLY and identified using the
   following schema URI:
   "urn:ietf:params:scim:schemas:core:2.0:ResourceType".  Unlike other
   core resources, all attributes are REQUIRED unless otherwise
   specified.  The "id" attribute is not required for the resource type
   resource.

   The following singular attributes are defined:

   id
      The resource type's server unique id.  This is often the same
      value as the "name" attribute.  OPTIONAL.

   name
      The resource type name.  When applicable, service providers MUST
      specify the name, e.g., "User" or "Group".  This name is
      referenced by the "meta.resourceType" attribute in all resources.
      REQUIRED.



RFC 7643                    SCIM Core Schema              September 2015


   description
      The resource type's human-readable description.  When applicable,
      service providers MUST specify the description.  OPTIONAL.

   endpoint
      The resource type's HTTP-addressable endpoint relative to the Base
      URL of the service provider, e.g., "Users".  REQUIRED.

   schema
      The resource type's primary/base schema URI, e.g.,
      "urn:ietf:params:scim:schemas:core:2.0:User".  This MUST be equal
      to the "id" attribute of the associated "Schema" resource.
      REQUIRED.

   schemaExtensions
      A list of URIs of the resource type's schema extensions.
      OPTIONAL.

      schema  The URI of an extended schema, e.g., "urn:edu:2.0:Staff".
         This MUST be equal to the "id" attribute of a "Schema"
         resource.  REQUIRED.

      required  A Boolean value that specifies whether or not the schema
         extension is required for the resource type.  If true, a
         resource of this type MUST include this schema extension and
         also include any attributes declared as required in this schema
         extension.  If false, a resource of this type MAY omit this
         schema extension.  REQUIRED.

7.  Schema Definition

   This section defines a way to specify the schema in use by resources
   available and accepted by a SCIM service provider.  For each
   "schemas" URI value, this schema specifies the defined attribute(s)
   and their characteristics (mutability, returnability, etc).  For
   every schema URI used in a resource object, there is a corresponding
   "Schema" resource.  "Schema" resources are not modifiable, and their
   associated attributes have a mutability of "readOnly".  Except for
   "id" (which is always returned), all attributes have a "returned"
   characteristic of "default".  Unless otherwise specified, all schema
   attributes are case insensitive.  These resources have a "schemas"
   attribute with the following schema URI:

   urn:ietf:params:scim:schemas:core:2.0:Schema

   Unlike other core resources, the "Schema" resource MAY contain a
   complex object within a sub-attribute, and all attributes are
   REQUIRED unless otherwise specified.



RFC 7643                    SCIM Core Schema              September 2015


   The following singular attributes are defined:

   id
      The unique URI of the schema.  When applicable, service providers
      MUST specify the URI, e.g.,
      "urn:ietf:params:scim:schemas:core:2.0:User".  Unlike most other
      schemas, which use some sort of Globally Unique Identifier (GUID)
      for the "id", the schema "id" is a URI so that it can be
      registered and is portable between different service providers and
      clients.  REQUIRED.

   name
      The schema's human-readable name.  When applicable, service
      providers MUST specify the name, e.g., "User" or "Group".
      OPTIONAL.

   description
      The schema's human-readable description.  When applicable, service
      providers MUST specify the description.  OPTIONAL.

   The following multi-valued attribute is defined:

   attributes
      A complex type that defines service provider attributes and their
      qualities via the following set of sub-attributes:

      name  The attribute's name.

      type  The attribute's data type.  Valid values are "string",
         "boolean", "decimal", "integer", "dateTime", "reference", and
         "complex".  When an attribute is of type "complex", there
         SHOULD be a corresponding schema attribute "subAttributes"
         defined, listing the sub-attributes of the attribute.

      subAttributes  When an attribute is of type "complex",
         "subAttributes" defines a set of sub-attributes.
         "subAttributes" has the same schema sub-attributes as
         "attributes".

      multiValued  A Boolean value indicating the attribute's plurality.

      description  The attribute's human-readable description.  When
         applicable, service providers MUST specify the description.

      required  A Boolean value that specifies whether or not the
         attribute is required.





RFC 7643                    SCIM Core Schema              September 2015


      canonicalValues  A collection of suggested canonical values that
         MAY be used (e.g., "work" and "home").  In some cases, service
         providers MAY choose to ignore unsupported values.  OPTIONAL.

      caseExact  A Boolean value that specifies whether or not a string
         attribute is case sensitive.  The server SHALL use case
         sensitivity when evaluating filters.  For attributes that are
         case exact, the server SHALL preserve case for any value
         submitted.  If the attribute is case insensitive, the server
         MAY alter case for a submitted value.  Case sensitivity also
         impacts how attribute values MAY be compared against filter
         values (see Section 3.4.2.2 of [RFC7644]).

      mutability  A single keyword indicating the circumstances under
         which the value of the attribute can be (re)defined:

         readOnly  The attribute SHALL NOT be modified.

         readWrite  The attribute MAY be updated and read at any time.
            This is the default value.

         immutable  The attribute MAY be defined at resource creation
            (e.g., POST) or at record replacement via a request (e.g., a
            PUT).  The attribute SHALL NOT be updated.

         writeOnly  The attribute MAY be updated at any time.  Attribute
            values SHALL NOT be returned (e.g., because the value is a
            stored hash).  Note: An attribute with a mutability of
            "writeOnly" usually also has a returned setting of "never".

      returned  A single keyword that indicates when an attribute and
         associated values are returned in response to a GET request or
         in response to a PUT, POST, or PATCH request.  Valid keywords
         are as follows:

         always  The attribute is always returned, regardless of the
            contents of the "attributes" parameter.  For example, "id"
            is always returned to identify a SCIM resource.

         never  The attribute is never returned.  This may occur because
            the original attribute value (e.g., a hashed value) is not
            retained by the service provider.  A service provider MAY
            allow attributes to be used in a search filter.








RFC 7643                    SCIM Core Schema              September 2015


         default  The attribute is returned by default in all SCIM
            operation responses where attribute values are returned.  If
            the GET request "attributes" parameter is specified,
            attribute values are only returned if the attribute is named
            in the "attributes" parameter.  DEFAULT.

         request  The attribute is returned in response to any PUT,
            POST, or PATCH operations if the attribute was specified by
            the client (for example, the attribute was modified).  The
            attribute is returned in a SCIM query operation only if
            specified in the "attributes" parameter.

      uniqueness  A single keyword value that specifies how the service
         provider enforces uniqueness of attribute values.  A server MAY
         reject an invalid value based on uniqueness by returning HTTP
         response code 400 (Bad Request).  A client MAY enforce
         uniqueness on the client side to a greater degree than the
         service provider enforces.  For example, a client could make a
         value unique while the server has uniqueness of "none".  Valid
         keywords are as follows:

         none  The values are not intended to be unique in any way.
            DEFAULT.

         server  The value SHOULD be unique within the context of the
            current SCIM endpoint (or tenancy) and MAY be globally
            unique (e.g., a "username", email address, or other
            server-generated key or counter).  No two resources on the
            same server SHOULD possess the same value.

         global  The value SHOULD be globally unique (e.g., an email
            address, a GUID, or other value).  No two resources on any
            server SHOULD possess the same value.

      referenceTypes  A multi-valued array of JSON strings that indicate
         the SCIM resource types that may be referenced.  Valid values
         are as follows:

         +  A SCIM resource type (e.g., "User" or "Group"),

         +  "external" - indicating that the resource is an external
            resource (e.g., a photo), or

         +  "uri" - indicating that the reference is to a service
            endpoint or an identifier (e.g., a schema URN).

         This attribute is only applicable for attributes that are of
         type "reference" (Section 2.3.7).



RFC 7643                    SCIM Core Schema              September 2015


8.  JSON Representation

8.1.  Minimal User Representation

   The following is a non-normative example of the minimal required SCIM
   representation in JSON format.

{
  "schemas": ["urn:ietf:params:scim:schemas:core:2.0:User"],
  "id": "2819c223-7f76-453a-919d-413861904646",
  "userName": "bjensen@example.com",
  "meta": {
    "resourceType": "User",
    "created": "2010-01-23T04:56:22Z",
    "lastModified": "2011-05-13T04:42:34Z",
    "version": "W\/\"3694e05e9dff590\"",
    "location":
     "https://example.com/v2/Users/2819c223-7f76-453a-919d-413861904646"
  }
}

            Figure 3: Example Minimal User JSON Representation





























RFC 7643                    SCIM Core Schema              September 2015


8.2.  Full User Representation

   The following is a non-normative example of the fully populated SCIM
   representation in JSON format.

{
  "schemas": ["urn:ietf:params:scim:schemas:core:2.0:User"],
  "id": "2819c223-7f76-453a-919d-413861904646",
  "externalId": "701984",
  "userName": "bjensen@example.com",
  "name": {
    "formatted": "Ms. Barbara J Jensen, III",
    "familyName": "Jensen",
    "givenName": "Barbara",
    "middleName": "Jane",
    "honorificPrefix": "Ms.",
    "honorificSuffix": "III"
  },
  "displayName": "Babs Jensen",
  "nickName": "Babs",
  "profileUrl": "https://login.example.com/bjensen",
  "emails": [
    {
      "value": "bjensen@example.com",
      "type": "work",
      "primary": true
    },
    {
      "value": "babs@jensen.org",
      "type": "home"
    }
  ],
  "addresses": [
    {
      "type": "work",
      "streetAddress": "100 Universal City Plaza",
      "locality": "Hollywood",
      "region": "CA",
      "postalCode": "91608",
      "country": "USA",
      "formatted": "100 Universal City Plaza\nHollywood, CA 91608 USA",
      "primary": true
    },








RFC 7643                    SCIM Core Schema              September 2015


    {
      "type": "home",
      "streetAddress": "456 Hollywood Blvd",
      "locality": "Hollywood",
      "region": "CA",
      "postalCode": "91608",
      "country": "USA",
      "formatted": "456 Hollywood Blvd\nHollywood, CA 91608 USA"
    }
  ],
  "phoneNumbers": [
    {
      "value": "555-555-5555",
      "type": "work"
    },
    {
      "value": "555-555-4444",
      "type": "mobile"
    }
  ],
  "ims": [
    {
      "value": "someaimhandle",
      "type": "aim"
    }
  ],
  "photos": [
    {
      "value":
        "https://photos.example.com/profilephoto/72930000000Ccne/F",
      "type": "photo"
    },
    {
      "value":
        "https://photos.example.com/profilephoto/72930000000Ccne/T",
      "type": "thumbnail"
    }
  ],













RFC 7643                    SCIM Core Schema              September 2015


  "userType": "Employee",
  "title": "Tour Guide",
  "preferredLanguage": "en-US",
  "locale": "en-US",
  "timezone": "America/Los_Angeles",
  "active":true,
  "password": "t1meMa$heen",
  "groups": [
    {
      "value": "e9e30dba-f08f-4109-8486-d5c6a331660a",
      "$ref":
"https://example.com/v2/Groups/e9e30dba-f08f-4109-8486-d5c6a331660a",
      "display": "Tour Guides"
    },
    {
      "value": "fc348aa8-3835-40eb-a20b-c726e15c55b5",
      "$ref":
"https://example.com/v2/Groups/fc348aa8-3835-40eb-a20b-c726e15c55b5",
      "display": "Employees"
    },
    {
      "value": "71ddacd2-a8e7-49b8-a5db-ae50d0a5bfd7",
      "$ref":
"https://example.com/v2/Groups/71ddacd2-a8e7-49b8-a5db-ae50d0a5bfd7",
      "display": "US Employees"
    }
  ],
























RFC 7643                    SCIM Core Schema              September 2015


  "x509Certificates": [
    {
      "value":
       "MIIDQzCCAqygAwIBAgICEAAwDQYJKoZIhvcNAQEFBQAwTjELMAkGA1UEBhMCVVMx
        EzARBgNVBAgMCkNhbGlmb3JuaWExFDASBgNVBAoMC2V4YW1wbGUuY29tMRQwEgYD
        VQQDDAtleGFtcGxlLmNvbTAeFw0xMTEwMjIwNjI0MzFaFw0xMjEwMDQwNjI0MzFa
        MH8xCzAJBgNVBAYTAlVTMRMwEQYDVQQIDApDYWxpZm9ybmlhMRQwEgYDVQQKDAtl
        eGFtcGxlLmNvbTEhMB8GA1UEAwwYTXMuIEJhcmJhcmEgSiBKZW5zZW4gSUlJMSIw
        IAYJKoZIhvcNAQkBFhNiamVuc2VuQGV4YW1wbGUuY29tMIIBIjANBgkqhkiG9w0B
        AQEFAAOCAQ8AMIIBCgKCAQEA7Kr+Dcds/JQ5GwejJFcBIP682X3xpjis56AK02bc
        1FLgzdLI8auoR+cC9/Vrh5t66HkQIOdA4unHh0AaZ4xL5PhVbXIPMB5vAPKpzz5i
        PSi8xO8SL7I7SDhcBVJhqVqr3HgllEG6UClDdHO7nkLuwXq8HcISKkbT5WFTVfFZ
        zidPl8HZ7DhXkZIRtJwBweq4bvm3hM1Os7UQH05ZS6cVDgweKNwdLLrT51ikSQG3
        DYrl+ft781UQRIqxgwqCfXEuDiinPh0kkvIi5jivVu1Z9QiwlYEdRbLJ4zJQBmDr
        SGTMYn4lRc2HgHO4DqB/bnMVorHB0CC6AV1QoFK4GPe1LwIDAQABo3sweTAJBgNV
        HRMEAjAAMCwGCWCGSAGG+EIBDQQfFh1PcGVuU1NMIEdlbmVyYXRlZCBDZXJ0aWZp
        Y2F0ZTAdBgNVHQ4EFgQU8pD0U0vsZIsaA16lL8En8bx0F/gwHwYDVR0jBBgwFoAU
        dGeKitcaF7gnzsNwDx708kqaVt0wDQYJKoZIhvcNAQEFBQADgYEAA81SsFnOdYJt
        Ng5Tcq+/ByEDrBgnusx0jloUhByPMEVkoMZ3J7j1ZgI8rAbOkNngX8+pKfTiDz1R
        C4+dx8oU6Za+4NJXUjlL5CvV6BEYb1+QAEJwitTVvxB/A67g42/vzgAtoRUeDov1
        +GFiBZ+GNF/cAYKcMtGcrs2i97ZkJMo="
    }
  ],
  "meta": {
    "resourceType": "User",
    "created": "2010-01-23T04:56:22Z",
    "lastModified": "2011-05-13T04:42:34Z",
    "version": "W\/\"a330bc54f0671c9\"",
    "location":
"https://example.com/v2/Users/2819c223-7f76-453a-919d-413861904646"
  }
}

              Figure 4: Example Full User JSON Representation

















RFC 7643                    SCIM Core Schema              September 2015


8.3.  Enterprise User Extension Representation

   The following is a non-normative example of the fully populated User
   using the enterprise User extension in JSON format.

{
  "schemas":
    ["urn:ietf:params:scim:schemas:core:2.0:User",
      "urn:ietf:params:scim:schemas:extension:enterprise:2.0:User"],
  "id": "2819c223-7f76-453a-919d-413861904646",
  "externalId": "701984",
  "userName": "bjensen@example.com",
  "name": {
    "formatted": "Ms. Barbara J Jensen, III",
    "familyName": "Jensen",
    "givenName": "Barbara",
    "middleName": "Jane",
    "honorificPrefix": "Ms.",
    "honorificSuffix": "III"
  },
  "displayName": "Babs Jensen",
  "nickName": "Babs",
  "profileUrl": "https://login.example.com/bjensen",
  "emails": [
    {
      "value": "bjensen@example.com",
      "type": "work",
      "primary": true
    },
    {
      "value": "babs@jensen.org",
      "type": "home"
    }
  ],
  "addresses": [
    {
      "streetAddress": "100 Universal City Plaza",
      "locality": "Hollywood",
      "region": "CA",
      "postalCode": "91608",
      "country": "USA",
      "formatted": "100 Universal City Plaza\nHollywood, CA 91608 USA",
      "type": "work",
      "primary": true
    },






RFC 7643                    SCIM Core Schema              September 2015


    {
      "streetAddress": "456 Hollywood Blvd",
      "locality": "Hollywood",
      "region": "CA",
      "postalCode": "91608",
      "country": "USA",
      "formatted": "456 Hollywood Blvd\nHollywood, CA 91608 USA",
      "type": "home"
     }
  ],
  "phoneNumbers": [
    {
      "value": "555-555-5555",
      "type": "work"
    },
    {
      "value": "555-555-4444",
      "type": "mobile"
    }
  ],
  "ims": [
    {
      "value": "someaimhandle",
      "type": "aim"
    }
  ],
  "photos": [
    {
      "value":
        "https://photos.example.com/profilephoto/72930000000Ccne/F",
      "type": "photo"
    },
    {
      "value":
        "https://photos.example.com/profilephoto/72930000000Ccne/T",
      "type": "thumbnail"
    }
  ],













RFC 7643                    SCIM Core Schema              September 2015


  "userType": "Employee",
  "title": "Tour Guide",
  "preferredLanguage": "en-US",
  "locale": "en-US",
  "timezone": "America/Los_Angeles",
  "active":true,
  "password": "t1meMa$heen",
  "groups": [
    {
      "value": "e9e30dba-f08f-4109-8486-d5c6a331660a",
      "$ref": "../Groups/e9e30dba-f08f-4109-8486-d5c6a331660a",
      "display": "Tour Guides"
    },
    {
      "value": "fc348aa8-3835-40eb-a20b-c726e15c55b5",
      "$ref": "../Groups/fc348aa8-3835-40eb-a20b-c726e15c55b5",
      "display": "Employees"
    },
    {
      "value": "71ddacd2-a8e7-49b8-a5db-ae50d0a5bfd7",
      "$ref": "../Groups/71ddacd2-a8e7-49b8-a5db-ae50d0a5bfd7",
      "display": "US Employees"
    }
  ],
  "x509Certificates": [
    {
      "value":
       "MIIDQzCCAqygAwIBAgICEAAwDQYJKoZIhvcNAQEFBQAwTjELMAkGA1UEBhMCVVMx
        EzARBgNVBAgMCkNhbGlmb3JuaWExFDASBgNVBAoMC2V4YW1wbGUuY29tMRQwEgYD
        VQQDDAtleGFtcGxlLmNvbTAeFw0xMTEwMjIwNjI0MzFaFw0xMjEwMDQwNjI0MzFa
        MH8xCzAJBgNVBAYTAlVTMRMwEQYDVQQIDApDYWxpZm9ybmlhMRQwEgYDVQQKDAtl
        eGFtcGxlLmNvbTEhMB8GA1UEAwwYTXMuIEJhcmJhcmEgSiBKZW5zZW4gSUlJMSIw
        IAYJKoZIhvcNAQkBFhNiamVuc2VuQGV4YW1wbGUuY29tMIIBIjANBgkqhkiG9w0B
        AQEFAAOCAQ8AMIIBCgKCAQEA7Kr+Dcds/JQ5GwejJFcBIP682X3xpjis56AK02bc
        1FLgzdLI8auoR+cC9/Vrh5t66HkQIOdA4unHh0AaZ4xL5PhVbXIPMB5vAPKpzz5i
        PSi8xO8SL7I7SDhcBVJhqVqr3HgllEG6UClDdHO7nkLuwXq8HcISKkbT5WFTVfFZ
        zidPl8HZ7DhXkZIRtJwBweq4bvm3hM1Os7UQH05ZS6cVDgweKNwdLLrT51ikSQG3
        DYrl+ft781UQRIqxgwqCfXEuDiinPh0kkvIi5jivVu1Z9QiwlYEdRbLJ4zJQBmDr
        SGTMYn4lRc2HgHO4DqB/bnMVorHB0CC6AV1QoFK4GPe1LwIDAQABo3sweTAJBgNV
        HRMEAjAAMCwGCWCGSAGG+EIBDQQfFh1PcGVuU1NMIEdlbmVyYXRlZCBDZXJ0aWZp
        Y2F0ZTAdBgNVHQ4EFgQU8pD0U0vsZIsaA16lL8En8bx0F/gwHwYDVR0jBBgwFoAU
        dGeKitcaF7gnzsNwDx708kqaVt0wDQYJKoZIhvcNAQEFBQADgYEAA81SsFnOdYJt
        Ng5Tcq+/ByEDrBgnusx0jloUhByPMEVkoMZ3J7j1ZgI8rAbOkNngX8+pKfTiDz1R
        C4+dx8oU6Za+4NJXUjlL5CvV6BEYb1+QAEJwitTVvxB/A67g42/vzgAtoRUeDov1
        +GFiBZ+GNF/cAYKcMtGcrs2i97ZkJMo="
    }
  ],




RFC 7643                    SCIM Core Schema              September 2015


  "urn:ietf:params:scim:schemas:extension:enterprise:2.0:User": {
    "employeeNumber": "701984",
    "costCenter": "4130",
    "organization": "Universal Studios",
    "division": "Theme Park",
    "department": "Tour Operations",
    "manager": {
      "value": "26118915-6090-4610-87e4-49d8ca9f808d",
      "$ref": "../Users/26118915-6090-4610-87e4-49d8ca9f808d",
      "displayName": "John Smith"
    }
  },
  "meta": {
    "resourceType": "User",
    "created": "2010-01-23T04:56:22Z",
    "lastModified": "2011-05-13T04:42:34Z",
    "version": "W\/\"3694e05e9dff591\"",
    "location":
"https://example.com/v2/Users/2819c223-7f76-453a-919d-413861904646"
  }
}

           Figure 5: Example Enterprise User JSON Representation




























RFC 7643                    SCIM Core Schema              September 2015


8.4.  Group Representation

   The following is a non-normative example of the SCIM Group
   representation in JSON format.

   {
     "schemas": ["urn:ietf:params:scim:schemas:core:2.0:Group"],
     "id": "e9e30dba-f08f-4109-8486-d5c6a331660a",
     "displayName": "Tour Guides",
     "members": [
       {
         "value": "2819c223-7f76-453a-919d-413861904646",
         "$ref":
   "https://example.com/v2/Users/2819c223-7f76-453a-919d-413861904646",
         "display": "Babs Jensen"
       },
       {
         "value": "902c246b-6245-4190-8e05-00816be7344a",
         "$ref":
   "https://example.com/v2/Users/902c246b-6245-4190-8e05-00816be7344a",
         "display": "Mandy Pepperidge"
       }
     ],
     "meta": {
       "resourceType": "Group",
       "created": "2010-01-23T04:56:22Z",
       "lastModified": "2011-05-13T04:42:34Z",
       "version": "W\/\"3694e05e9dff592\"",
       "location":
   "https://example.com/v2/Groups/e9e30dba-f08f-4109-8486-d5c6a331660a"
     }
   }

                Figure 6: Example Group JSON Representation

















RFC 7643                    SCIM Core Schema              September 2015


8.5.  Service Provider Configuration Representation

   The following is a non-normative example of the SCIM service provider
   configuration representation in JSON format.

  {
    "schemas":
      ["urn:ietf:params:scim:schemas:core:2.0:ServiceProviderConfig"],
    "documentationUri": "http://example.com/help/scim.html",
    "patch": {
      "supported":true
    },
    "bulk": {
      "supported":true,
      "maxOperations":1000,
      "maxPayloadSize":1048576
    },
    "filter": {
      "supported":true,
      "maxResults": 200
    },
    "changePassword": {
      "supported":true
    },
    "sort": {
      "supported":true
    },
    "etag": {
      "supported":true
    },
    "authenticationSchemes": [
      {
        "name": "OAuth Bearer Token",
        "description":
          "Authentication scheme using the OAuth Bearer Token Standard",
        "specUri": "http://www.rfc-editor.org/info/rfc6750",
        "documentationUri": "http://example.com/help/oauth.html",
        "type": "oauthbearertoken",
        "primary": true
      },











RFC 7643                    SCIM Core Schema              September 2015


      {
        "name": "HTTP Basic",
        "description":
          "Authentication scheme using the HTTP Basic Standard",
        "specUri": "http://www.rfc-editor.org/info/rfc2617",
        "documentationUri": "http://example.com/help/httpBasic.html",
        "type": "httpbasic"
       }
    ],
    "meta": {
      "location": "https://example.com/v2/ServiceProviderConfig",
      "resourceType": "ServiceProviderConfig",
      "created": "2010-01-23T04:56:22Z",
      "lastModified": "2011-05-13T04:42:34Z",
      "version": "W\/\"3694e05e9dff594\""
    }
  }

   Figure 7: Example Service Provider Configuration JSON Representation
































RFC 7643                    SCIM Core Schema              September 2015


8.6.  Resource Type Representation

   The following is a non-normative example of the SCIM resource types
   in JSON format.

   [{
     "schemas": ["urn:ietf:params:scim:schemas:core:2.0:ResourceType"],
     "id": "User",
     "name": "User",
     "endpoint": "/Users",
     "description": "User Account",
     "schema": "urn:ietf:params:scim:schemas:core:2.0:User",
     "schemaExtensions": [
       {
         "schema":
           "urn:ietf:params:scim:schemas:extension:enterprise:2.0:User",
         "required": true
       }
     ],
     "meta": {
       "location": "https://example.com/v2/ResourceTypes/User",
       "resourceType": "ResourceType"
     }
    },
    {
     "schemas": ["urn:ietf:params:scim:schemas:core:2.0:ResourceType"],
     "id": "Group",
     "name": "Group",
     "endpoint": "/Groups",
     "description": "Group",
     "schema": "urn:ietf:params:scim:schemas:core:2.0:Group",
     "meta": {
       "location": "https://example.com/v2/ResourceTypes/Group",
       "resourceType": "ResourceType"
     }
   }]

            Figure 8: Example Resource Type JSON Representation













RFC 7643                    SCIM Core Schema              September 2015


8.7.  Schema Representation

   The following sections provide representations of schemas for both
   SCIM resources and service provider schemas.  Note that the JSON
   representation has been modified for readability and to fit the
   specification format.

8.7.1.  Resource Schema Representation

   The following is intended as an example of the SCIM schema
   representation in JSON format for SCIM resources.  Where permitted,
   individual values and schema MAY change.  This example includes
   schema representations for "User", "Group", and "EnterpriseUser";
   other schema representations are possible.

[
  {
    "id" : "urn:ietf:params:scim:schemas:core:2.0:User",
    "name" : "User",
    "description" : "User Account",
    "attributes" : [
      {
        "name" : "userName",
        "type" : "string",
        "multiValued" : false,
        "description" : "Unique identifier for the User, typically
used by the user to directly authenticate to the service provider.
Each User MUST include a non-empty userName value.  This identifier
MUST be unique across the service provider's entire set of Users.
REQUIRED.",
        "required" : true,
        "caseExact" : false,
        "mutability" : "readWrite",
        "returned" : "default",
        "uniqueness" : "server"
      },















RFC 7643                    SCIM Core Schema              September 2015


      {
        "name" : "name",
        "type" : "complex",
        "multiValued" : false,
        "description" : "The components of the user's real name.
Providers MAY return just the full name as a single string in the
formatted sub-attribute, or they MAY return just the individual
component attributes using the other sub-attributes, or they MAY
return both.  If both variants are returned, they SHOULD be
describing the same name, with the formatted name indicating how the
component attributes should be combined.",
        "required" : false,
        "subAttributes" : [
          {
            "name" : "formatted",
            "type" : "string",
            "multiValued" : false,
            "description" : "The full name, including all middle
names, titles, and suffixes as appropriate, formatted for display
(e.g., 'Ms. Barbara J Jensen, III').",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "familyName",
            "type" : "string",
            "multiValued" : false,
            "description" : "The family name of the User, or
last name in most Western languages (e.g., 'Jensen' given the full
name 'Ms. Barbara J Jensen, III').",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },












RFC 7643                    SCIM Core Schema              September 2015


          {
            "name" : "givenName",
            "type" : "string",
            "multiValued" : false,
            "description" : "The given name of the User, or
first name in most Western languages (e.g., 'Barbara' given the
full name 'Ms. Barbara J Jensen, III').",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "middleName",
            "type" : "string",
            "multiValued" : false,
            "description" : "The middle name(s) of the User
(e.g., 'Jane' given the full name 'Ms. Barbara J Jensen, III').",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "honorificPrefix",
            "type" : "string",
            "multiValued" : false,
            "description" : "The honorific prefix(es) of the User, or
title in most Western languages (e.g., 'Ms.' given the full name
'Ms. Barbara J Jensen, III').",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },













RFC 7643                    SCIM Core Schema              September 2015


          {
            "name" : "honorificSuffix",
            "type" : "string",
            "multiValued" : false,
            "description" : "The honorific suffix(es) of the User, or
suffix in most Western languages (e.g., 'III' given the full name
'Ms. Barbara J Jensen, III').",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          }
        ],
        "mutability" : "readWrite",
        "returned" : "default",
        "uniqueness" : "none"
      },
      {
        "name" : "displayName",
        "type" : "string",
        "multiValued" : false,
        "description" : "The name of the User, suitable for display
to end-users.  The name SHOULD be the full name of the User being
described, if known.",
        "required" : false,
        "caseExact" : false,
        "mutability" : "readWrite",
        "returned" : "default",
        "uniqueness" : "none"
      },
      {
        "name" : "nickName",
        "type" : "string",
        "multiValued" : false,
        "description" : "The casual way to address the user in real
life, e.g., 'Bob' or 'Bobby' instead of 'Robert'.  This attribute
SHOULD NOT be used to represent a User's username (e.g., 'bjensen' or
'mpepperidge').",
        "required" : false,
        "caseExact" : false,
        "mutability" : "readWrite",
        "returned" : "default",
        "uniqueness" : "none"
      },






RFC 7643                    SCIM Core Schema              September 2015


      {
        "name" : "profileUrl",
        "type" : "reference",
        "referenceTypes" : ["external"],
        "multiValued" : false,
        "description" : "A fully qualified URL pointing to a page
representing the User's online profile.",
        "required" : false,
        "caseExact" : false,
        "mutability" : "readWrite",
        "returned" : "default",
        "uniqueness" : "none"
      },
      {
        "name" : "title",
        "type" : "string",
        "multiValued" : false,
        "description" : "The user's title, such as
\"Vice President.\"",
        "required" : false,
        "caseExact" : false,
        "mutability" : "readWrite",
        "returned" : "default",
        "uniqueness" : "none"
      },
      {
        "name" : "userType",
        "type" : "string",
        "multiValued" : false,
        "description" : "Used to identify the relationship between
the organization and the user.  Typical values used might be
'Contractor', 'Employee', 'Intern', 'Temp', 'External', and
'Unknown', but any value may be used.",
        "required" : false,
        "caseExact" : false,
        "mutability" : "readWrite",
        "returned" : "default",
        "uniqueness" : "none"
      },












RFC 7643                    SCIM Core Schema              September 2015


      {
        "name" : "preferredLanguage",
        "type" : "string",
        "multiValued" : false,
        "description" : "Indicates the User's preferred written or
spoken language.  Generally used for selecting a localized user
interface; e.g., 'en_US' specifies the language English and country
US.",
        "required" : false,
        "caseExact" : false,
        "mutability" : "readWrite",
        "returned" : "default",
        "uniqueness" : "none"
      },
      {
        "name" : "locale",
        "type" : "string",
        "multiValued" : false,
        "description" : "Used to indicate the User's default location
for purposes of localizing items such as currency, date time format, or
numerical representations.",
        "required" : false,
        "caseExact" : false,
        "mutability" : "readWrite",
        "returned" : "default",
        "uniqueness" : "none"
      },
      {
        "name" : "timezone",
        "type" : "string",
        "multiValued" : false,
        "description" : "The User's time zone in the 'Olson' time zone
database format, e.g., 'America/Los_Angeles'.",
        "required" : false,
        "caseExact" : false,
        "mutability" : "readWrite",
        "returned" : "default",
        "uniqueness" : "none"
      },












RFC 7643                    SCIM Core Schema              September 2015


      {
        "name" : "active",
        "type" : "boolean",
        "multiValued" : false,
        "description" : "A Boolean value indicating the User's
administrative status.",
        "required" : false,
        "mutability" : "readWrite",
        "returned" : "default"
      },
      {
        "name" : "password",
        "type" : "string",
        "multiValued" : false,
        "description" : "The User's cleartext password.  This
attribute is intended to be used as a means to specify an initial
password when creating a new User or to reset an existing User's
password.",
        "required" : false,
        "caseExact" : false,
        "mutability" : "writeOnly",
        "returned" : "never",
        "uniqueness" : "none"
      },
      {
        "name" : "emails",
        "type" : "complex",
        "multiValued" : true,
        "description" : "Email addresses for the user.  The value
SHOULD be canonicalized by the service provider, e.g.,
'bjensen@example.com' instead of 'bjensen@EXAMPLE.COM'.
Canonical type values of 'work', 'home', and 'other'.",
        "required" : false,
        "subAttributes" : [
          {
            "name" : "value",
            "type" : "string",
            "multiValued" : false,
            "description" : "Email addresses for the user.  The value
SHOULD be canonicalized by the service provider, e.g.,
'bjensen@example.com' instead of 'bjensen@EXAMPLE.COM'.
Canonical type values of 'work', 'home', and 'other'.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },



RFC 7643                    SCIM Core Schema              September 2015


          {
            "name" : "display",
            "type" : "string",
            "multiValued" : false,
            "description" : "A human-readable name, primarily used
for display purposes.  READ-ONLY.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "type",
            "type" : "string",
            "multiValued" : false,
            "description" : "A label indicating the attribute's
function, e.g., 'work' or 'home'.",
            "required" : false,
            "caseExact" : false,
            "canonicalValues" : [
              "work",
              "home",
              "other"
            ],
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "primary",
            "type" : "boolean",
            "multiValued" : false,
            "description" : "A Boolean value indicating the 'primary'
or preferred attribute value for this attribute, e.g., the preferred
mailing address or primary email address.  The primary attribute
value 'true' MUST appear no more than once.",
            "required" : false,
            "mutability" : "readWrite",
            "returned" : "default"
          }
        ],
        "mutability" : "readWrite",
        "returned" : "default",
        "uniqueness" : "none"
      },





RFC 7643                    SCIM Core Schema              September 2015


      {
        "name" : "phoneNumbers",
        "type" : "complex",
        "multiValued" : true,
        "description" : "Phone numbers for the User.  The value
SHOULD be canonicalized by the service provider according to the
format specified in RFC 3966, e.g., 'tel:+1-201-555-0123'.
Canonical type values of 'work', 'home', 'mobile', 'fax', 'pager',
and 'other'.",
        "required" : false,
        "subAttributes" : [
          {
            "name" : "value",
            "type" : "string",
            "multiValued" : false,
            "description" : "Phone number of the User.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "display",
            "type" : "string",
            "multiValued" : false,
            "description" : "A human-readable name, primarily used
for display purposes.  READ-ONLY.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },

















RFC 7643                    SCIM Core Schema              September 2015


          {
            "name" : "type",
            "type" : "string",
            "multiValued" : false,
            "description" : "A label indicating the attribute's
function, e.g., 'work', 'home', 'mobile'.",
            "required" : false,
            "caseExact" : false,
            "canonicalValues" : [
              "work",
              "home",
              "mobile",
              "fax",
              "pager",
              "other"
            ],
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "primary",
            "type" : "boolean",
            "multiValued" : false,
            "description" : "A Boolean value indicating the 'primary'
or preferred attribute value for this attribute, e.g., the preferred
phone number or primary phone number.  The primary attribute value
'true' MUST appear no more than once.",
            "required" : false,
            "mutability" : "readWrite",
            "returned" : "default"
          }
        ],
        "mutability" : "readWrite",
        "returned" : "default"
      },















RFC 7643                    SCIM Core Schema              September 2015


      {
        "name" : "ims",
        "type" : "complex",
        "multiValued" : true,
        "description" : "Instant messaging addresses for the User.",
        "required" : false,
        "subAttributes" : [
          {
            "name" : "value",
            "type" : "string",
            "multiValued" : false,
            "description" : "Instant messaging address for the User.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "display",
            "type" : "string",
            "multiValued" : false,
            "description" : "A human-readable name, primarily used
for display purposes.  READ-ONLY.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },





















RFC 7643                    SCIM Core Schema              September 2015


          {
            "name" : "type",
            "type" : "string",
            "multiValued" : false,
            "description" : "A label indicating the attribute's
function, e.g., 'aim', 'gtalk', 'xmpp'.",
            "required" : false,
            "caseExact" : false,
            "canonicalValues" : [
              "aim",
              "gtalk",
              "icq",
              "xmpp",
              "msn",
              "skype",
              "qq",
              "yahoo"
            ],
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "primary",
            "type" : "boolean",
            "multiValued" : false,
            "description" : "A Boolean value indicating the 'primary'
or preferred attribute value for this attribute, e.g., the preferred
messenger or primary messenger.  The primary attribute value 'true'
MUST appear no more than once.",
            "required" : false,
            "mutability" : "readWrite",
            "returned" : "default"
          }
        ],
        "mutability" : "readWrite",
        "returned" : "default"
      },













RFC 7643                    SCIM Core Schema              September 2015


      {
        "name" : "photos",
        "type" : "complex",
        "multiValued" : true,
        "description" : "URLs of photos of the User.",
        "required" : false,
        "subAttributes" : [
          {
            "name" : "value",
            "type" : "reference",
            "referenceTypes" : ["external"],
            "multiValued" : false,
            "description" : "URL of a photo of the User.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "display",
            "type" : "string",
            "multiValued" : false,
            "description" : "A human-readable name, primarily used
for display purposes.  READ-ONLY.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },




















RFC 7643                    SCIM Core Schema              September 2015


          {
            "name" : "type",
            "type" : "string",
            "multiValued" : false,
            "description" : "A label indicating the attribute's
function, i.e., 'photo' or 'thumbnail'.",
            "required" : false,
            "caseExact" : false,
            "canonicalValues" : [
              "photo",
              "thumbnail"
            ],
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "primary",
            "type" : "boolean",
            "multiValued" : false,
            "description" : "A Boolean value indicating the 'primary'
or preferred attribute value for this attribute, e.g., the preferred
photo or thumbnail.  The primary attribute value 'true' MUST appear
no more than once.",
            "required" : false,
            "mutability" : "readWrite",
            "returned" : "default"
          }
        ],
        "mutability" : "readWrite",
        "returned" : "default"
      },



















RFC 7643                    SCIM Core Schema              September 2015


      {
        "name" : "addresses",
        "type" : "complex",
        "multiValued" : true,
        "description" : "A physical mailing address for this User.
Canonical type values of 'work', 'home', and 'other'.  This attribute
is a complex type with the following sub-attributes.",
        "required" : false,
        "subAttributes" : [
          {
            "name" : "formatted",
            "type" : "string",
            "multiValued" : false,
            "description" : "The full mailing address, formatted for
display or use with a mailing label.  This attribute MAY contain
newlines.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "streetAddress",
            "type" : "string",
            "multiValued" : false,
            "description" : "The full street address component,
which may include house number, street name, P.O. box, and multi-line
extended street address information.  This attribute MAY contain
newlines.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "locality",
            "type" : "string",
            "multiValued" : false,
            "description" : "The city or locality component.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },




RFC 7643                    SCIM Core Schema              September 2015


          {
            "name" : "region",
            "type" : "string",
            "multiValued" : false,
            "description" : "The state or region component.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "postalCode",
            "type" : "string",
            "multiValued" : false,
            "description" : "The zip code or postal code component.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "country",
            "type" : "string",
            "multiValued" : false,
            "description" : "The country name component.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },


















RFC 7643                    SCIM Core Schema              September 2015


          {
            "name" : "type",
            "type" : "string",
            "multiValued" : false,
            "description" : "A label indicating the attribute's
function, e.g., 'work' or 'home'.",
            "required" : false,
            "caseExact" : false,
            "canonicalValues" : [
              "work",
              "home",
              "other"
            ],
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          }
        ],
        "mutability" : "readWrite",
        "returned" : "default",
        "uniqueness" : "none"
      },
      {
        "name" : "groups",
        "type" : "complex",
        "multiValued" : true,
        "description" : "A list of groups to which the user belongs,
either through direct membership, through nested groups, or
dynamically calculated.",
        "required" : false,
        "subAttributes" : [
          {
            "name" : "value",
            "type" : "string",
            "multiValued" : false,
            "description" : "The identifier of the User's group.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readOnly",
            "returned" : "default",
            "uniqueness" : "none"
          },









RFC 7643                    SCIM Core Schema              September 2015


          {
            "name" : "$ref",
            "type" : "reference",
            "referenceTypes" : [
              "User",
              "Group"
            ],
            "multiValued" : false,
            "description" : "The URI of the corresponding 'Group'
resource to which the user belongs.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readOnly",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "display",
            "type" : "string",
            "multiValued" : false,
            "description" : "A human-readable name, primarily used
for display purposes.  READ-ONLY.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readOnly",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "type",
            "type" : "string",
            "multiValued" : false,
            "description" : "A label indicating the attribute's
function, e.g., 'direct' or 'indirect'.",
            "required" : false,
            "caseExact" : false,
            "canonicalValues" : [
              "direct",
              "indirect"
            ],
            "mutability" : "readOnly",
            "returned" : "default",
            "uniqueness" : "none"
          }
        ],
        "mutability" : "readOnly",
        "returned" : "default"
      },



RFC 7643                    SCIM Core Schema              September 2015


      {
        "name" : "entitlements",
        "type" : "complex",
        "multiValued" : true,
        "description" : "A list of entitlements for the User that
represent a thing the User has.",
        "required" : false,
        "subAttributes" : [
          {
            "name" : "value",
            "type" : "string",
            "multiValued" : false,
            "description" : "The value of an entitlement.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "display",
            "type" : "string",
            "multiValued" : false,
            "description" : "A human-readable name, primarily used
for display purposes.  READ-ONLY.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "type",
            "type" : "string",
            "multiValued" : false,
            "description" : "A label indicating the attribute's
function.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },








RFC 7643                    SCIM Core Schema              September 2015


          {
            "name" : "primary",
            "type" : "boolean",
            "multiValued" : false,
            "description" : "A Boolean value indicating the 'primary'
or preferred attribute value for this attribute.  The primary
attribute value 'true' MUST appear no more than once.",
            "required" : false,
            "mutability" : "readWrite",
            "returned" : "default"
          }
        ],
        "mutability" : "readWrite",
        "returned" : "default"
      },
      {
        "name" : "roles",
        "type" : "complex",
        "multiValued" : true,
        "description" : "A list of roles for the User that
collectively represent who the User is, e.g., 'Student', 'Faculty'.",
        "required" : false,
        "subAttributes" : [
          {
            "name" : "value",
            "type" : "string",
            "multiValued" : false,
            "description" : "The value of a role.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "display",
            "type" : "string",
            "multiValued" : false,
            "description" : "A human-readable name, primarily used
for display purposes.  READ-ONLY.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },





RFC 7643                    SCIM Core Schema              September 2015


          {
            "name" : "type",
            "type" : "string",
            "multiValued" : false,
            "description" : "A label indicating the attribute's
function.",
            "required" : false,
            "caseExact" : false,
            "canonicalValues" : [],
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "primary",
            "type" : "boolean",
            "multiValued" : false,
            "description" : "A Boolean value indicating the 'primary'
or preferred attribute value for this attribute.  The primary
attribute value 'true' MUST appear no more than once.",
            "required" : false,
            "mutability" : "readWrite",
            "returned" : "default"
          }
        ],
        "mutability" : "readWrite",
        "returned" : "default"
      },
      {
        "name" : "x509Certificates",
        "type" : "complex",
        "multiValued" : true,
        "description" : "A list of certificates issued to the User.",
        "required" : false,
        "caseExact" : false,
        "subAttributes" : [
          {
            "name" : "value",
            "type" : "binary",
            "multiValued" : false,
            "description" : "The value of an X.509 certificate.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },




RFC 7643                    SCIM Core Schema              September 2015


          {
            "name" : "display",
            "type" : "string",
            "multiValued" : false,
            "description" : "A human-readable name, primarily used
for display purposes.  READ-ONLY.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "type",
            "type" : "string",
            "multiValued" : false,
            "description" : "A label indicating the attribute's
function.",
            "required" : false,
            "caseExact" : false,
            "canonicalValues" : [],
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "primary",
            "type" : "boolean",
            "multiValued" : false,
            "description" : "A Boolean value indicating the 'primary'
or preferred attribute value for this attribute.  The primary
attribute value 'true' MUST appear no more than once.",
            "required" : false,
            "mutability" : "readWrite",
            "returned" : "default"
          }
        ],
        "mutability" : "readWrite",
        "returned" : "default"
      }
    ],
    "meta" : {
      "resourceType" : "Schema",
      "location" :
        "/v2/Schemas/urn:ietf:params:scim:schemas:core:2.0:User"
    }
  },




RFC 7643                    SCIM Core Schema              September 2015


  {
    "id" : "urn:ietf:params:scim:schemas:core:2.0:Group",
    "name" : "Group",
    "description" : "Group",
    "attributes" : [
      {
        "name" : "displayName",
        "type" : "string",
        "multiValued" : false,
        "description" : "A human-readable name for the Group.
REQUIRED.",
        "required" : false,
        "caseExact" : false,
        "mutability" : "readWrite",
        "returned" : "default",
        "uniqueness" : "none"
      },
      {
        "name" : "members",
        "type" : "complex",
        "multiValued" : true,
        "description" : "A list of members of the Group.",
        "required" : false,
        "subAttributes" : [
          {
            "name" : "value",
            "type" : "string",
            "multiValued" : false,
            "description" : "Identifier of the member of this Group.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "immutable",
            "returned" : "default",
            "uniqueness" : "none"
          },
















RFC 7643                    SCIM Core Schema              September 2015


          {
            "name" : "$ref",
            "type" : "reference",
            "referenceTypes" : [
              "User",
              "Group"
            ],
            "multiValued" : false,
            "description" : "The URI corresponding to a SCIM resource
that is a member of this Group.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "immutable",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "type",
            "type" : "string",
            "multiValued" : false,
            "description" : "A label indicating the type of resource,
e.g., 'User' or 'Group'.",
            "required" : false,
            "caseExact" : false,
            "canonicalValues" : [
              "User",
              "Group"
            ],
            "mutability" : "immutable",
            "returned" : "default",
            "uniqueness" : "none"
          }
        ],
        "mutability" : "readWrite",
        "returned" : "default"
      }
    ],
    "meta" : {
      "resourceType" : "Schema",
      "location" :
        "/v2/Schemas/urn:ietf:params:scim:schemas:core:2.0:Group"
    }
  },








RFC 7643                    SCIM Core Schema              September 2015


  {
    "id" : "urn:ietf:params:scim:schemas:extension:enterprise:2.0:User",
    "name" : "EnterpriseUser",
    "description" : "Enterprise User",
    "attributes" : [
      {
        "name" : "employeeNumber",
        "type" : "string",
        "multiValued" : false,
        "description" : "Numeric or alphanumeric identifier assigned
to a person, typically based on order of hire or association with an
organization.",
        "required" : false,
        "caseExact" : false,
        "mutability" : "readWrite",
        "returned" : "default",
        "uniqueness" : "none"
      },
      {
        "name" : "costCenter",
        "type" : "string",
        "multiValued" : false,
        "description" : "Identifies the name of a cost center.",
        "required" : false,
        "caseExact" : false,
        "mutability" : "readWrite",
        "returned" : "default",
        "uniqueness" : "none"
      },
      {
        "name" : "organization",
        "type" : "string",
        "multiValued" : false,
        "description" : "Identifies the name of an organization.",
        "required" : false,
        "caseExact" : false,
        "mutability" : "readWrite",
        "returned" : "default",
        "uniqueness" : "none"
      },











RFC 7643                    SCIM Core Schema              September 2015


      {
        "name" : "division",
        "type" : "string",
        "multiValued" : false,
        "description" : "Identifies the name of a division.",
        "required" : false,
        "caseExact" : false,
        "mutability" : "readWrite",
        "returned" : "default",
        "uniqueness" : "none"
      },
      {
        "name" : "department",
        "type" : "string",
        "multiValued" : false,
        "description" : "Identifies the name of a department.",
        "required" : false,
        "caseExact" : false,
        "mutability" : "readWrite",
        "returned" : "default",
        "uniqueness" : "none"
      },
      {
        "name" : "manager",
        "type" : "complex",
        "multiValued" : false,
        "description" : "The User's manager.  A complex type that
optionally allows service providers to represent organizational
hierarchy by referencing the 'id' attribute of another User.",
        "required" : false,
        "subAttributes" : [
          {
            "name" : "value",
            "type" : "string",
            "multiValued" : false,
            "description" : "The id of the SCIM resource representing
the User's manager.  REQUIRED.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },








RFC 7643                    SCIM Core Schema              September 2015


          {
            "name" : "$ref",
            "type" : "reference",
            "referenceTypes" : [
              "User"
            ],
            "multiValued" : false,
            "description" : "The URI of the SCIM resource
representing the User's manager.  REQUIRED.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readWrite",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "displayName",
            "type" : "string",
            "multiValued" : false,
            "description" : "The displayName of the User's manager.
OPTIONAL and READ-ONLY.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readOnly",
            "returned" : "default",
            "uniqueness" : "none"
          }
        ],
        "mutability" : "readWrite",
        "returned" : "default"
      }
    ],
    "meta" : {
      "resourceType" : "Schema",
      "location" :
"/v2/Schemas/urn:ietf:params:scim:schemas:extension:enterprise:2.0:User"
    }
  }
]

         Figure 9: Example JSON Representation for Resource Schema










RFC 7643                    SCIM Core Schema              September 2015


8.7.2.  Service Provider Schema Representation

   The following is a representation of the SCIM schema for the fixed
   service provider schemas: ServiceProviderConfig, ResourceType, and
   Schema.

[
  {
    "id" :
      "urn:ietf:params:scim:schemas:core:2.0:ServiceProviderConfig",
    "name" : "Service Provider Configuration",
    "description" : "Schema for representing the service provider's
      configuration",
    "attributes" : [
      {
        "name" : "documentationUri",
        "type" : "reference",
        "referenceTypes" : ["external"],
        "multiValued" : false,
        "description" : "An HTTP-addressable URL pointing to the
          service provider's human-consumable help documentation.",
        "required" : false,
        "caseExact" : false,
        "mutability" : "readOnly",
        "returned" : "default",
        "uniqueness" : "none"
      },
























RFC 7643                    SCIM Core Schema              September 2015


      {
        "name" : "patch",
        "type" : "complex",
        "multiValued" : false,
        "description" : "A complex type that specifies PATCH
          configuration options.",
        "required" : true,
        "returned" : "default",
        "mutability" : "readOnly",
        "subAttributes" : [
          {
            "name" : "supported",
            "type" : "boolean",
            "multiValued" : false,
            "description" : "A Boolean value specifying whether or not
              the operation is supported.",
            "required" : true,
            "mutability" : "readOnly",
            "returned" : "default"
          }
        ]
      },
      {
        "name" : "bulk",
        "type" : "complex",
        "multiValued" : false,
        "description" : "A complex type that specifies bulk
          configuration options.",
        "required" : true,
        "returned" : "default",
        "mutability" : "readOnly",
        "subAttributes" : [
          {
            "name" : "supported",
            "type" : "boolean",
            "multiValued" : false,
            "description" : "A Boolean value specifying whether or not
              the operation is supported.",
            "required" : true,
            "mutability" : "readOnly",
            "returned" : "default"
          },









RFC 7643                    SCIM Core Schema              September 2015


          {
            "name" : "maxOperations",
            "type" : "integer",
            "multiValued" : false,
            "description" : "An integer value specifying the maximum
              number of operations.",
            "required" : true,
            "mutability" : "readOnly",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "maxPayloadSize",
            "type" : "integer",
            "multiValued" : false,
            "description" : "An integer value specifying the maximum
              payload size in bytes.",
            "required" : true,
            "mutability" : "readOnly",
            "returned" : "default",
            "uniqueness" : "none"
          }
        ]
      },
      {
        "name" : "filter",
        "type" : "complex",
        "multiValued" : false,
        "description" : "A complex type that specifies
          FILTER options.",
        "required" : true,
        "returned" : "default",
        "mutability" : "readOnly",
        "subAttributes" : [
          {
            "name" : "supported",
            "type" : "boolean",
            "multiValued" : false,
            "description" : "A Boolean value specifying whether or not
              the operation is supported.",
            "required" : true,
            "mutability" : "readOnly",
            "returned" : "default"
          },







RFC 7643                    SCIM Core Schema              September 2015


          {
            "name" : "maxResults",
            "type" : "integer",
            "multiValued" : false,
            "description" : "An integer value specifying the maximum
              number of resources returned in a response.",
            "required" : true,
            "mutability" : "readOnly",
            "returned" : "default",
            "uniqueness" : "none"
          }
        ]
      },
      {
        "name" : "changePassword",
        "type" : "complex",
        "multiValued" : false,
        "description" : "A complex type that specifies configuration
          options related to changing a password.",
        "required" : true,
        "returned" : "default",
        "mutability" : "readOnly",
        "subAttributes" : [
          {
            "name" : "supported",
            "type" : "boolean",
            "multiValued" : false,
            "description" : "A Boolean value specifying whether or not
              the operation is supported.",
            "required" : true,
            "mutability" : "readOnly",
            "returned" : "default"
          }
        ]
      },
















RFC 7643                    SCIM Core Schema              September 2015


      {
        "name" : "sort",
        "type" : "complex",
        "multiValued" : false,
        "description" : "A complex type that specifies sort result
          options.",
        "required" : true,
        "returned" : "default",
        "mutability" : "readOnly",
        "subAttributes" : [
          {
            "name" : "supported",
            "type" : "boolean",
            "multiValued" : false,
            "description" : "A Boolean value specifying whether or not
              the operation is supported.",
            "required" : true,
            "mutability" : "readOnly",
            "returned" : "default"
          }
        ]
      },
      {
        "name" : "authenticationSchemes",
        "type" : "complex",
        "multiValued" : true,
        "description" : "A complex type that specifies supported
          authentication scheme properties.",
        "required" : true,
        "returned" : "default",
        "mutability" : "readOnly",
        "subAttributes" : [
          {
            "name" : "name",
            "type" : "string",
            "multiValued" : false,
            "description" : "The common authentication scheme name,
              e.g., HTTP Basic.",
            "required" : true,
            "caseExact" : false,
            "mutability" : "readOnly",
            "returned" : "default",
            "uniqueness" : "none"
          },







RFC 7643                    SCIM Core Schema              September 2015


          {
            "name" : "description",
            "type" : "string",
            "multiValued" : false,
            "description" : "A description of the authentication
              scheme.",
            "required" : true,
            "caseExact" : false,
            "mutability" : "readOnly",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "specUri",
            "type" : "reference",
            "referenceTypes" : ["external"],
            "multiValued" : false,
            "description" : "An HTTP-addressable URL pointing to the
              authentication scheme's specification.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readOnly",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "documentationUri",
            "type" : "reference",
            "referenceTypes" : ["external"],
            "multiValued" : false,
            "description" : "An HTTP-addressable URL pointing to the
              authentication scheme's usage documentation.",
            "required" : false,
            "caseExact" : false,
            "mutability" : "readOnly",
            "returned" : "default",
            "uniqueness" : "none"
          }
        ]
      }
    ]
  },









RFC 7643                    SCIM Core Schema              September 2015


  {
    "id" : "urn:ietf:params:scim:schemas:core:2.0:ResourceType",
    "name" : "ResourceType",
    "description" : "Specifies the schema that describes a SCIM
      resource type",
    "attributes" : [
      {
        "name" : "id",
        "type" : "string",
        "multiValued" : false,
        "description" : "The resource type's server unique id.
          May be the same as the 'name' attribute.",
        "required" : false,
        "caseExact" : false,
        "mutability" : "readOnly",
        "returned" : "default",
        "uniqueness" : "none"
      },
      {
        "name" : "name",
        "type" : "string",
        "multiValued" : false,
        "description" : "The resource type name.  When applicable,
          service providers MUST specify the name, e.g., 'User'.",
        "required" : true,
        "caseExact" : false,
        "mutability" : "readOnly",
        "returned" : "default",
        "uniqueness" : "none"
      },
      {
        "name" : "description",
        "type" : "string",
        "multiValued" : false,
        "description" : "The resource type's human-readable
          description.  When applicable, service providers MUST
          specify the description.",
        "required" : false,
        "caseExact" : false,
        "mutability" : "readOnly",
        "returned" : "default",
        "uniqueness" : "none"
      },








RFC 7643                    SCIM Core Schema              September 2015


      {
        "name" : "endpoint",
        "type" : "reference",
        "referenceTypes" : ["uri"],
        "multiValued" : false,
        "description" : "The resource type's HTTP-addressable
          endpoint relative to the Base URL, e.g., '/Users'.",
        "required" : true,
        "caseExact" : false,
        "mutability" : "readOnly",
        "returned" : "default",
        "uniqueness" : "none"
      },
      {
        "name" : "schema",
        "type" : "reference",
        "referenceTypes" : ["uri"],
        "multiValued" : false,
        "description" : "The resource type's primary/base schema
          URI.",
        "required" : true,
        "caseExact" : true,
        "mutability" : "readOnly",
        "returned" : "default",
        "uniqueness" : "none"
      },
      {
        "name" : "schemaExtensions",
        "type" : "complex",
        "multiValued" : false,
        "description" : "A list of URIs of the resource type's schema
          extensions.",
        "required" : true,
        "mutability" : "readOnly",
        "returned" : "default",
        "subAttributes" : [
          {
            "name" : "schema",
            "type" : "reference",
            "referenceTypes" : ["uri"],
            "multiValued" : false,
            "description" : "The URI of a schema extension.",
            "required" : true,
            "caseExact" : true,
            "mutability" : "readOnly",
            "returned" : "default",
            "uniqueness" : "none"
          },



RFC 7643                    SCIM Core Schema              September 2015


          {
            "name" : "required",
            "type" : "boolean",
            "multiValued" : false,
            "description" : "A Boolean value that specifies whether
              or not the schema extension is required for the
              resource type.  If true, a resource of this type MUST
              include this schema extension and also include any
              attributes declared as required in this schema extension.
              If false, a resource of this type MAY omit this schema
              extension.",
            "required" : true,
            "mutability" : "readOnly",
            "returned" : "default"
          }
        ]
      }
    ]
  },
  {
    "id" : "urn:ietf:params:scim:schemas:core:2.0:Schema",
    "name" : "Schema",
    "description" : "Specifies the schema that describes a
      SCIM schema",
    "attributes" : [
      {
        "name" : "id",
        "type" : "string",
        "multiValued" : false,
        "description" : "The unique URI of the schema.
          When applicable, service providers MUST specify the URI.",
        "required" : true,
        "caseExact" : false,
        "mutability" : "readOnly",
        "returned" : "default",
        "uniqueness" : "none"
      },














RFC 7643                    SCIM Core Schema              September 2015


      {
        "name" : "name",
        "type" : "string",
        "multiValued" : false,
        "description" : "The schema's human-readable name.  When
          applicable, service providers MUST specify the name,
          e.g., 'User'.",
        "required" : true,
        "caseExact" : false,
        "mutability" : "readOnly",
        "returned" : "default",
        "uniqueness" : "none"
      },
      {
        "name" : "description",
        "type" : "string",
        "multiValued" : false,
        "description" : "The schema's human-readable name.  When
          applicable, service providers MUST specify the name,
          e.g., 'User'.",
        "required" : false,
        "caseExact" : false,
        "mutability" : "readOnly",
        "returned" : "default",
        "uniqueness" : "none"
      },
      {
        "name" : "attributes",
        "type" : "complex",
        "multiValued" : true,
        "description" : "A complex attribute that includes the
          attributes of a schema.",
        "required" : true,
        "mutability" : "readOnly",
        "returned" : "default",
        "subAttributes" : [
          {
            "name" : "name",
            "type" : "string",
            "multiValued" : false,
            "description" : "The attribute's name.",
            "required" : true,
            "caseExact" : true,
            "mutability" : "readOnly",
            "returned" : "default",
            "uniqueness" : "none"
          },




RFC 7643                    SCIM Core Schema              September 2015


          {
            "name" : "type",
            "type" : "string",
            "multiValued" : false,
            "description" : "The attribute's data type.
              Valid values include 'string', 'complex', 'boolean',
              'decimal', 'integer', 'dateTime', 'reference'.",
            "required" : true,
            "canonicalValues" : [
              "string",
              "complex",
              "boolean",
              "decimal",
              "integer",
              "dateTime",
              "reference"
            ],
            "caseExact" : false,
            "mutability" : "readOnly",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "multiValued",
            "type" : "boolean",
            "multiValued" : false,
            "description" : "A Boolean value indicating an
              attribute's plurality.",
            "required" : true,
            "mutability" : "readOnly",
            "returned" : "default"
          },
          {
            "name" : "description",
            "type" : "string",
            "multiValued" : false,
            "description" : "A human-readable description of the
              attribute.",
            "required" : false,
            "caseExact" : true,
            "mutability" : "readOnly",
            "returned" : "default",
            "uniqueness" : "none"
          },







RFC 7643                    SCIM Core Schema              September 2015


          {
            "name" : "required",
            "type" : "boolean",
            "multiValued" : false,
            "description" : "A boolean value indicating whether or
              not the attribute is required.",
            "required" : false,
            "mutability" : "readOnly",
            "returned" : "default"
          },
          {
            "name" : "canonicalValues",
            "type" : "string",
            "multiValued" : true,
            "description" : "A collection of canonical values.  When
              applicable, service providers MUST specify the
              canonical types, e.g., 'work', 'home'.",
            "required" : false,
            "caseExact" : true,
            "mutability" : "readOnly",
            "returned" : "default",
            "uniqueness" : "none"
          },
          {
            "name" : "caseExact",
            "type" : "boolean",
            "multiValued" : false,
            "description" : "A Boolean value indicating whether or
              not a string attribute is case sensitive.",
            "required" : false,
            "mutability" : "readOnly",
            "returned" : "default"
          },


















RFC 7643                    SCIM Core Schema              September 2015


          {
            "name" : "mutability",
            "type" : "string",
            "multiValued" : false,
            "description" : "Indicates whether or not an attribute
              is modifiable.",
            "required" : false,
            "caseExact" : true,
            "mutability" : "readOnly",
            "returned" : "default",
            "uniqueness" : "none",
            "canonicalValues" : [
              "readOnly",
              "readWrite",
              "immutable",
              "writeOnly"
            ]
          },
          {
            "name" : "returned",
            "type" : "string",
            "multiValued" : false,
            "description" : "Indicates when an attribute is returned
              in a response (e.g., to a query).",
            "required" : false,
            "caseExact" : true,
            "mutability" : "readOnly",
            "returned" : "default",
            "uniqueness" : "none",
            "canonicalValues" : [
              "always",
              "never",
              "default",
              "request"
            ]
          },















RFC 7643                    SCIM Core Schema              September 2015


          {
            "name" : "uniqueness",
            "type" : "string",
            "multiValued" : false,
            "description" : "Indicates how unique a value must be.",
            "required" : false,
            "caseExact" : true,
            "mutability" : "readOnly",
            "returned" : "default",
            "uniqueness" : "none",
            "canonicalValues" : [
              "none",
              "server",
              "global"
            ]
          },
          {
            "name" : "referenceTypes",
            "type" : "string",
            "multiValued" : true,
            "description" : "Used only with an attribute of type
              'reference'.  Specifies a SCIM resourceType that a
              reference attribute MAY refer to, e.g., 'User'.",
            "required" : false,
            "caseExact" : true,
            "mutability" : "readOnly",
            "returned" : "default",
            "uniqueness" : "none"
          },






















RFC 7643                    SCIM Core Schema              September 2015


          {
            "name" : "subAttributes",
            "type" : "complex",
            "multiValued" : true,
            "description" : "Used to define the sub-attributes of a
              complex attribute.",
            "required" : false,
            "mutability" : "readOnly",
            "returned" : "default",
            "subAttributes" : [
              {
                "name" : "name",
                "type" : "string",
                "multiValued" : false,
                "description" : "The attribute's name.",
                "required" : true,
                "caseExact" : true,
                "mutability" : "readOnly",
                "returned" : "default",
                "uniqueness" : "none"
              },
              {
                "name" : "type",
                "type" : "string",
                "multiValued" : false,
                "description" : "The attribute's data type.
                  Valid values include 'string', 'complex', 'boolean',
                  'decimal', 'integer', 'dateTime', 'reference'.",
                "required" : true,
                "caseExact" : false,
                "mutability" : "readOnly",
                "returned" : "default",
                "uniqueness" : "none",
                "canonicalValues" : [
                  "string",
                  "complex",
                  "boolean",
                  "decimal",
                  "integer",
                  "dateTime",
                  "reference"
                ]
              },








RFC 7643                    SCIM Core Schema              September 2015


              {
                "name" : "multiValued",
                "type" : "boolean",
                "multiValued" : false,
                "description" : "A Boolean value indicating an
                  attribute's plurality.",
                "required" : true,
                "mutability" : "readOnly",
                "returned" : "default"
              },
              {
                "name" : "description",
                "type" : "string",
                "multiValued" : false,
                "description" : "A human-readable description of the
                  attribute.",
                "required" : false,
                "caseExact" : true,
                "mutability" : "readOnly",
                "returned" : "default",
                "uniqueness" : "none"
              },
              {
                "name" : "required",
                "type" : "boolean",
                "multiValued" : false,
                "description" : "A boolean value indicating whether or
                  not the attribute is required.",
                "required" : false,
                "mutability" : "readOnly",
                "returned" : "default"
              },
              {
                "name" : "canonicalValues",
                "type" : "string",
                "multiValued" : true,
                "description" : "A collection of canonical values.  When
                  applicable, service providers MUST specify the
                  canonical types, e.g., 'work', 'home'.",
                "required" : false,
                "caseExact" : true,
                "mutability" : "readOnly",
                "returned" : "default",
                "uniqueness" : "none"
              },






RFC 7643                    SCIM Core Schema              September 2015


              {
                "name" : "caseExact",
                "type" : "boolean",
                "multiValued" : false,
                "description" : "A Boolean value indicating whether or
                  not a string attribute is case sensitive.",
                "required" : false,
                "mutability" : "readOnly",
                "returned" : "default"
              },
              {
                "name" : "mutability",
                "type" : "string",
                "multiValued" : false,
                "description" : "Indicates whether or not an
                  attribute is modifiable.",
                "required" : false,
                "caseExact" : true,
                "mutability" : "readOnly",
                "returned" : "default",
                "uniqueness" : "none",
                "canonicalValues" : [
                  "readOnly",
                  "readWrite",
                  "immutable",
                  "writeOnly"
                ]
              },
              {
                "name" : "returned",
                "type" : "string",
                "multiValued" : false,
                "description" : "Indicates when an attribute is
                  returned in a response (e.g., to a query).",
                "required" : false,
                "caseExact" : true,
                "mutability" : "readOnly",
                "returned" : "default",
                "uniqueness" : "none",
                "canonicalValues" : [
                  "always",
                  "never",
                  "default",
                  "request"
                ]
              },





RFC 7643                    SCIM Core Schema              September 2015


              {
                "name" : "uniqueness",
                "type" : "string",
                "multiValued" : false,
                "description" : "Indicates how unique a value must be.",
                "required" : false,
                "caseExact" : true,
                "mutability" : "readOnly",
                "returned" : "default",
                "uniqueness" : "none",
                "canonicalValues" : [
                  "none",
                  "server",
                  "global"
                ]
              },
              {
                "name" : "referenceTypes",
                "type" : "string",
                "multiValued" : false,
                "description" : "Used only with an attribute of type
                  'reference'.  Specifies a SCIM resourceType that a
                  reference attribute MAY refer to, e.g., 'User'.",
                "required" : false,
                "caseExact" : true,
                "mutability" : "readOnly",
                "returned" : "default",
                "uniqueness" : "none"
              }
            ]
          }
        ]
      }
    ]
  }
]

   Figure 10: Representation of Fixed Service Provider Endpoint Schemas













RFC 7643                    SCIM Core Schema              September 2015


9.  Security Considerations

9.1.  Protocol

   SCIM data is intended to be exchanged using the SCIM protocol.  It is
   important when handling data to implement the security considerations
   outlined in Section 7 of [RFC7644].

9.2.  Passwords and Other Sensitive Security Data

   Passwords and other attributes related to security credentials are of
   an extremely sensitive nature and require special handling when
   transmitted or stored.  While the SCIM protocol uses cleartext
   passwords for value assignment and equality-testing purposes,
   password values MUST NOT be stored in cleartext form.

   Administrators should undertake industry best practices to protect
   the storage of credentials and in particular SHOULD follow
   recommendations outlined in Section 5.1.4.1 of [RFC6819].  These
   requirements include, but are not limited to, the following:

   o  Provide injection attack countermeasures (e.g., by validating all
      inputs and parameters);

   o  Credentials should not be stored in cleartext form;

   o  Store credentials using an encrypted protection mechanism (e.g.,
      hashing); and

   o  Where possible, avoid passwords as the sole form of
      authentication, and consider using credentials that are based on
      asymmetric cryptography.

9.3.  Privacy

   The SCIM core schema defines attributes that are sensitive and may be
   considered personally identifying information (PII).  These privacy
   considerations should be considered for extensions as well as the
   schema defined in this specification.

   For the purposes of this specification, PII is defined as any
   attribute that may be used as a unique key to identify a person
   (e.g., "User").  Since other information may be used in combination
   to identify an individual, all attributes in SCIM are considered
   "sensitive" personal information.  Consult regional jurisdictions to
   see if there are special considerations for the handling of personal
   information (e.g., PII).




RFC 7643                    SCIM Core Schema              September 2015


   Information should be shared on an as-needed basis.  A SCIM client
   should limit information to what it believes a service provider
   requires, and a SCIM service provider should only accept information
   it needs.  Clients and service providers should take into
   consideration that personal information is being conveyed across
   technical (e.g., protocol and applications), administrative (e.g.,
   organizational, corporate), and jurisdictional boundaries.  In
   particular, information security and privacy must be considered.

   Security service level agreements for the handling of these
   attributes are beyond the scope of this document but are to be
   carefully considered by implementers and deploying organizations.

   Please see the Privacy Considerations section of [RFC7644] for more
   protocol-specific considerations regarding the handling of SCIM
   information.

   SCIM defines attributes such as "id", "externalId", and SCIM resource
   URIs, which cause new PII to be generated; this information is
   important to the way that the SCIM protocol identifies and locates
   resources.  Where possible, it is suggested that service providers
   take the following remediations:

   o  Where possible, assign and bind identifiers to specific tenants
      and/or clients.  When multiple tenants are able to reference the
      same resource, they should do so via separate identifiers (id or
      externalId).  This ensures that separate domains linked to the
      same information cannot perform identifier correlation.

   o  In the case of "externalId", if multiple values are supported, use
      access control to restrict access to the client domain that
      assigned the "externalId" value.

   o  Ensure that access to data is appropriately restricted to
      authorized parties with a "need to know".

   o  When persisted, ensure that the appropriate protection mechanisms
      are in place to restrict access by unauthorized parties, including
      administrators or parties with access to backup data.












RFC 7643                    SCIM Core Schema              September 2015


10.  IANA Considerations

10.1.  Registration of SCIM URN Sub-namespace and SCIM Registry

   IANA has added an entry to the "IETF URN Sub-namespace for Registered
   Protocol Parameter Identifiers" registry and created a sub-namespace
   for the Registered Parameter Identifier as per [RFC3553]:
   "urn:ietf:params:scim".

   To manage this sub-namespace, IANA has created the "System for
   Cross-domain Identity Management (SCIM) Schema URIs" registry, which
   is used to manage entries within the "urn:ietf:params:scim"
   namespace.  The registry description is as follows:

   o  Registry name: SCIM

   o  Specification: this document (RFC 7643)

   o  Repository: See Section 10.2

   o  Index value: See Section 10.2

10.2.  URN Sub-namespace for SCIM

   SCIM schemas and SCIM messages utilize URIs to identify the schema in
   use or other relevant context.  This section creates and registers an
   IETF URN Sub-namespace for use in the SCIM specifications and future
   extensions.























RFC 7643                    SCIM Core Schema              September 2015


10.2.1.  Specification Template

   Namespace ID:

      The Namespace ID "scim" has been assigned.

   Registration Information:

      Version: 1

      Date: 2015-06-22

   Declared registrant of the namespace:

      Registering organization
         The Internet Engineering Task Force

      Designated contact
         A designated expert will monitor the SCIM public mailing list,
         "scim@ietf.org".

   Declaration of Syntactic Structure:

      The Namespace Specific String (NSS) of all URNs that use the
      "scim" Namespace ID shall have the following structure:

   urn:ietf:params:scim:{type}:{name}{:other}

      The keywords have the following meaning:

      type
         The entity type, which is either "schemas" or "api".

      name
         A required US-ASCII string that conforms to the URN syntax
         requirements (see [RFC2141]) and defines a major namespace of a
         schema used within SCIM (e.g., "core", which is reserved for
         SCIM specifications).  The value MAY also be an industry name
         or organization name.

      other
         Any US-ASCII string that conforms to the URN syntax
         requirements (see [RFC2141]) and defines the sub-namespace
         (which MAY be further broken down in namespaces delimited by
         colons) as needed to uniquely identify a schema.






RFC 7643                    SCIM Core Schema              September 2015


   Relevant Ancillary Documentation:

      None

   Identifier Uniqueness Considerations:

      The designated contact shall be responsible for reviewing and
      enforcing uniqueness.

   Identifier Persistence Considerations:

      Once a name has been allocated, it MUST NOT be reallocated for a
      different purpose.  The rules provided for assignments of values
      within a sub-namespace MUST be constructed so that the meanings of
      values cannot change.  This registration mechanism is not
      appropriate for naming values whose meanings may change over time.

      As the SCIM specifications are updated and the SCIM protocol
      version is adjusted, a new registration will be made when
      significant changes are made -- for example,
      "urn:ietf:params:scim:schemas:core:1.0 (externally defined, not
      previously registered)" and
      "urn:ietf:params:scim:schemas:core:2.0".

   Process of Identifier Assignment:

      Identifiers with namespace type "schema" (e.g.,
      "urn:ietf:params:scim:schemas") are assigned after the review of
      the assigned contact via the SCIM public mailing list,
      "scim@ietf.org", as documented in Section 10.3.

      Namespaces with type "api" (e.g., "urn:ietf:params:scim:api") and
      "param" (e.g., "urn:ietf:params:scim:param") are reserved for
      IETF-approved SCIM specifications.

   Process of Identifier Resolution:

      The namespace is not currently listed with a Resolution Discovery
      System (RDS), but nothing about the namespace prohibits the future
      definition of appropriate resolution methods or listing with an
      RDS.

   Rules for Lexical Equivalence:

      No special considerations; the rules for lexical equivalence
      specified in [RFC2141] apply.





RFC 7643                    SCIM Core Schema              September 2015


   Conformance with URN Syntax:

      No special considerations.

   Validation Mechanism:

      None specified.

   Scope:

      Global.

10.3.  Registering SCIM Schemas

   This section defines the process for registering new SCIM schemas
   with IANA in the "System for Cross-domain Identity Management (SCIM)
   Schema URIs" registry (see Section 10.1).  A schema URI is used as a
   value in the "schemas" attribute (Section 3) for the purpose of
   distinguishing extensions used in a SCIM resource.

10.3.1.  Registration Procedure

   The IETF has created a mailing list, scim@ietf.org, which can be used
   for public discussion of SCIM schema proposals prior to registration.
   Use of the mailing list is strongly encouraged.  The IESG has
   appointed a designated expert [RFC5226] who will monitor the
   scim@ietf.org mailing list and review registrations.

   Registration of new "core" schemas (e.g., in the namespace
   "urn:ietf:params:scim:schemas:core") and "API" schemas (e.g., in the
   namespace "urn:ietf:params:scim:api") MUST be reviewed by the
   designated expert and published in an RFC.  An RFC is REQUIRED for
   the registration of new value data types that modify existing
   properties.  An RFC is also REQUIRED for registration of SCIM schema
   URIs that modify SCIM schema previously documented in an existing
   RFC.  URNs within "urn:ietf:params:scim" but outside the above
   namespaces MAY be registered with a simple review (e.g., check for
   spam) by the designated expert on a first-come-first-served basis.

   The registration procedure begins when a completed registration
   template, defined in the sections below, is sent to scim@ietf.org and
   iana@iana.org.  Within two weeks, the designated expert is expected
   to tell IANA and the submitter of the registration whether the
   registration is approved, approved with minor changes, or rejected
   with cause.  When a registration is rejected with cause, it can be
   resubmitted if the concerns listed in the cause are addressed.





RFC 7643                    SCIM Core Schema              September 2015


   Decisions made by the designated expert can be appealed to the IESG
   Applications Area Director, then to the IESG.  They follow the normal
   appeals procedure for IESG decisions.

   Once the registration procedure concludes successfully, IANA creates
   or modifies the corresponding record in the SCIM schema registry.
   The completed registration template is discarded.

   An RFC specifying one or more new schema URIs MUST include the
   completed registration templates, which MAY be expanded with
   additional information.  These completed templates are intended to go
   in the body of the document, not in the IANA Considerations section.
   The RFC SHOULD include any attributes defined.

10.3.2.  Schema Registration Template

   A SCIM schema URI is defined by completing the following template:

   Schema URI:  A unique URI for the SCIM schema extension.

   Schema Name:  A descriptive name of the schema extension (e.g.,
      "Generic Device").

   Intended or Associated Resource Type:  A value defining the resource
      type (e.g., "Device").

   Purpose:  A description of the purpose of the extension and/or its
      intended use.

   Single-value Attributes:  A list and description of single-valued
      attributes defined, including complex attributes.

   Multi-valued Attributes:  A list and description of multi-valued
      attributes defined, including complex attributes.

















RFC 7643                    SCIM Core Schema              September 2015


10.4.  Initial SCIM Schema Registry

   The IANA has populated the "System for Cross-domain Identity
   Management (SCIM) Schema URIs" registry with the following registries
   for SCIM schema URIs, with pointers to appropriate reference
   documents.  Note: The schema URIs listed below are broken into two
   lines for readability.

   +-----------------------------------+-----------------+-------------+
   | Schema URI                        | Name            | Reference   |
   +-----------------------------------+-----------------+-------------+
   | urn:ietf:params:scim:schemas:     | User Resource   | See Section |
   | core:2.0:User                     |                 | 4.1         |
   |                                   |                 |             |
   | urn:ietf:params:scim:schemas:     | Enterprise User | See Section |
   | extension:enterprise:2.0:User     | Extension       | 4.3         |
   |                                   |                 |             |
   | urn:ietf:params:scim:schemas:     | Group Resource  | See Section |
   | core:2.0:Group                    |                 | 4.2         |
   +-----------------------------------+-----------------+-------------+

                    SCIM Schema URIs for Data Resources

   +-----------------------------------+-------------------+-----------+
   | Schema URI                        | Name              | Reference |
   +-----------------------------------+-------------------+-----------+
   | urn:ietf:params:scim:schemas:     | Service Provider  | See       |
   | core:2.0:ServiceProviderConfig    | Configuration     | Section 5 |
   |                                   | Schema            |           |
   |                                   |                   |           |
   | urn:ietf:params:scim:schemas:     | Resource Type     | See       |
   | core:2.0:ResourceType             | Configuration     | Section 6 |
   |                                   |                   |           |
   | urn:ietf:params:scim:schemas:     | Schema            | See       |
   | core:2.0:Schema                   | Definitions       | Section 7 |
   |                                   | Schema            |           |
   +-----------------------------------+-------------------+-----------+

                      SCIM Server-Related Schema URIs












RFC 7643                    SCIM Core Schema              September 2015


11.  References

11.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <http://www.rfc-editor.org/info/rfc2119>.

   [RFC2141]  Moats, R., "URN Syntax", RFC 2141, DOI 10.17487/RFC2141,
              May 1997, <http://www.rfc-editor.org/info/rfc2141>.

   [RFC3553]  Mealling, M., Masinter, L., Hardie, T., and G. Klyne,
              "An IETF URN Sub-namespace for Registered Protocol
              Parameters", BCP 73, RFC 3553, DOI 10.17487/RFC3553,
              June 2003, <http://www.rfc-editor.org/info/rfc3553>.

   [RFC3629]  Yergeau, F., "UTF-8, a transformation format of
              ISO 10646", STD 63, RFC 3629, DOI 10.17487/RFC3629,
              November 2003, <http://www.rfc-editor.org/info/rfc3629>.

   [RFC3966]  Schulzrinne, H., "The tel URI for Telephone Numbers",
              RFC 3966, DOI 10.17487/RFC3966, December 2004,
              <http://www.rfc-editor.org/info/rfc3966>.

   [RFC3986]  Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
              Resource Identifier (URI): Generic Syntax", STD 66,
              RFC 3986, DOI 10.17487/RFC3986, January 2005,
              <http://www.rfc-editor.org/info/rfc3986>.

   [RFC4647]  Phillips, A. and M. Davis, "Matching of Language Tags",
              BCP 47, RFC 4647, DOI 10.17487/RFC4647, September 2006,
              <http://www.rfc-editor.org/info/rfc4647>.

   [RFC4648]  Josefsson, S., "The Base16, Base32, and Base64 Data
              Encodings", RFC 4648, DOI 10.17487/RFC4648, October 2006,
              <http://www.rfc-editor.org/info/rfc4648>.

   [RFC5234]  Crocker, D., Ed., and P. Overell, "Augmented BNF for
              Syntax Specifications: ABNF", STD 68, RFC 5234,
              DOI 10.17487/ RFC5234, January 2008,
              <http://www.rfc-editor.org/info/rfc5234>.

   [RFC5280]  Cooper, D., Santesson, S., Farrell, S., Boeyen, S.,
              Housley, R., and W. Polk, "Internet X.509 Public Key
              Infrastructure Certificate and Certificate Revocation List
              (CRL) Profile", RFC 5280, DOI 10.17487/RFC5280, May 2008,
              <http://www.rfc-editor.org/info/rfc5280>.



RFC 7643                    SCIM Core Schema              September 2015


   [RFC5321]  Klensin, J., "Simple Mail Transfer Protocol", RFC 5321,
              DOI 10.17487/RFC5321, October 2008,
              <http://www.rfc-editor.org/info/rfc5321>.

   [RFC5646]  Phillips, A., Ed., and M. Davis, Ed., "Tags for
              Identifying Languages", BCP 47, RFC 5646,
              DOI 10.17487/RFC5646, September 2009,
              <http://www.rfc-editor.org/info/rfc5646>.

   [RFC6557]  Lear, E. and P. Eggert, "Procedures for Maintaining the
              Time Zone Database", BCP 175, RFC 6557,
              DOI 10.17487/RFC6557, February 2012,
              <http://www.rfc-editor.org/info/rfc6557>.

   [RFC7159]  Bray, T., Ed., "The JavaScript Object Notation (JSON) Data
              Interchange Format", RFC 7159, DOI 10.17487/RFC7159,
              March 2014, <http://www.rfc-editor.org/info/rfc7159>.

   [RFC7231]  Fielding, R., Ed., and J. Reschke, Ed., "Hypertext
              Transfer Protocol (HTTP/1.1): Semantics and Content",
              RFC 7231, DOI 10.17487/RFC7231, June 2014,
              <http://www.rfc-editor.org/info/rfc7231>.

   [RFC7232]  Fielding, R., Ed., and J. Reschke, Ed., "Hypertext
              Transfer Protocol (HTTP/1.1): Conditional Requests",
              RFC 7232, DOI 10.17487/RFC7232, June 2014,
              <http://www.rfc-editor.org/info/rfc7232>.

   [RFC7644]  Hunt, P., Ed., Grizzle, K., Ansari, M., Wahlstroem, E.,
              and C. Mortimore, "System for Cross-domain Identity
              Management: Protocol", RFC 7644, DOI 10.17487/RFC7644,
              September 2015, <http://www.rfc-editor.org/info/rfc7644>.

11.2.  Informative References

   [ISO3166]  International Organization for Standardization, "Codes for
              the representation of names of countries and their
              subdivisions - Part 1: Country codes", ISO 3166-1:2013,
              November 2013, <http://www.iso.org>.

   [Olson-TZ] Internet Assigned Numbers Authority, "IANA Time Zone
              Database", <https://www.iana.org/time-zones>.

   [PortableContacts]
              Smarr, J., "Portable Contacts 1.0 Draft C - Schema Only",
              August 2008,
              <http://www.portablecontacts.net/draft-spec.html>.




RFC 7643                    SCIM Core Schema              September 2015


   [RFC2277]  Alvestrand, H., "IETF Policy on Character Sets and
              Languages", BCP 18, RFC 2277, DOI 10.17487/RFC2277,
              January 1998, <http://www.rfc-editor.org/info/rfc2277>.

   [RFC4512]  Zeilenga, K., Ed., "Lightweight Directory Access Protocol
              (LDAP): Directory Information Models", RFC 4512,
              DOI 10.17487/RFC4512, June 2006,
              <http://www.rfc-editor.org/info/rfc4512>.

   [RFC5226]  Narten, T. and H. Alvestrand, "Guidelines for Writing an
              IANA Considerations Section in RFCs", BCP 26, RFC 5226,
              DOI 10.17487/RFC5226, May 2008,
              <http://www.rfc-editor.org/info/rfc5226>.

   [RFC6350]  Perreault, S., "vCard Format Specification", RFC 6350,
              DOI 10.17487/RFC6350, August 2011,
              <http://www.rfc-editor.org/info/rfc6350>.

   [RFC6749]  Hardt, D., Ed., "The OAuth 2.0 Authorization Framework",
              RFC 6749, DOI 10.17487/RFC6749, October 2012,
              <http://www.rfc-editor.org/info/rfc6749>.

   [RFC6819]  Lodderstedt, T., Ed., McGloin, M., and P. Hunt, "OAuth 2.0
              Threat Model and Security Considerations", RFC 6819,
              DOI 10.17487/RFC6819, January 2013,
              <http://www.rfc-editor.org/info/rfc6819>.

   [XML-Schema]
              Peterson, D., Gao, S., Malhotra, A., Sperberg-McQueen, C.,
              and H. Thompson, "XML Schema Definition Language (XSD) 1.1
              Part 2: Datatypes", April 2012,
              <http://www.w3.org/TR/xmlschema11-2/>.



















RFC 7643                    SCIM Core Schema              September 2015


Acknowledgements

   The editor would like to acknowledge the contribution and work of the
   editors of draft versions of this document:

      Chuck Mortimore, Salesforce

      Patrick Harding, Ping

      Paul Madsen, Ping

      Trey Drake, UnboundID

   The SCIM Community would like to thank the following people for the
   work they've done in the research, formulation, drafting, editing,
   and support of this specification.

      Morteza Ansari (morteza.ansari@cisco.com)

      Sidharth Choudhury (schoudhury@salesforce.com)

      Samuel Erdtman (samuel@erdtman.se)

      Kelly Grizzle (kelly.grizzle@sailpoint.com)

      Chris Phillips (cjphillips@gmail.com)

      Erik Wahlstroem (erik.wahlstrom@nexusgroup.com)

      Phil Hunt (phil.hunt@yahoo.com)

   Special thanks to Joseph Smarr, whose excellent work on the Portable
   Contacts Specification [PortableContacts] provided a basis for the
   SCIM schema structure and text.

















RFC 7643                    SCIM Core Schema              September 2015


Authors' Addresses

   Phil Hunt (editor)
   Oracle Corporation

   Email: phil.hunt@yahoo.com


   Kelly Grizzle
   SailPoint

   Email: kelly.grizzle@sailpoint.com


   Erik Wahlstroem
   Nexus Technology

   Email: erik.wahlstrom@nexusgroup.com


   Chuck Mortimore
   Salesforce.com

   Email: cmortimore@salesforce.com