Rfc7482
TitleRegistration Data Access Protocol (RDAP) Query Format
AuthorA. Newton, S. Hollenbeck
DateMarch 2015
Format:TXT, HTML
Obsoleted byRFC9082
Status:PROPOSED STANDARD






Internet Engineering Task Force (IETF)                         A. Newton
Request for Comments: 7482                                          ARIN
Category: Standards Track                                  S. Hollenbeck
ISSN: 2070-1721                                            Verisign Labs
                                                              March 2015


         Registration Data Access Protocol (RDAP) Query Format

Abstract

   This document describes uniform patterns to construct HTTP URLs that
   may be used to retrieve registration information from registries
   (including both Regional Internet Registries (RIRs) and Domain Name
   Registries (DNRs)) using "RESTful" web access patterns.  These
   uniform patterns define the query syntax for the Registration Data
   Access Protocol (RDAP).

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 5741.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   http://www.rfc-editor.org/info/rfc7482.

Copyright Notice

   Copyright (c) 2015 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.





RFC 7482                    RDAP Query Format                 March 2015


Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Conventions Used in This Document . . . . . . . . . . . . . .   4
     2.1.  Acronyms and Abbreviations  . . . . . . . . . . . . . . .   4
   3.  Path Segment Specification  . . . . . . . . . . . . . . . . .   4
     3.1.  Lookup Path Segment Specification . . . . . . . . . . . .   5
       3.1.1.  IP Network Path Segment Specification . . . . . . . .   6
       3.1.2.  Autonomous System Path Segment Specification  . . . .   7
       3.1.3.  Domain Path Segment Specification . . . . . . . . . .   7
       3.1.4.  Nameserver Path Segment Specification . . . . . . . .   8
       3.1.5.  Entity Path Segment Specification . . . . . . . . . .   9
       3.1.6.  Help Path Segment Specification . . . . . . . . . . .   9
     3.2.  Search Path Segment Specification . . . . . . . . . . . .   9
       3.2.1.  Domain Search . . . . . . . . . . . . . . . . . . . .  10
       3.2.2.  Nameserver Search . . . . . . . . . . . . . . . . . .  11
       3.2.3.  Entity Search . . . . . . . . . . . . . . . . . . . .  12
   4.  Query Processing  . . . . . . . . . . . . . . . . . . . . . .  13
     4.1.  Partial String Searching  . . . . . . . . . . . . . . . .  13
     4.2.  Associated Records  . . . . . . . . . . . . . . . . . . .  14
   5.  Extensibility . . . . . . . . . . . . . . . . . . . . . . . .  14
   6.  Internationalization Considerations . . . . . . . . . . . . .  15
     6.1.  Character Encoding Considerations . . . . . . . . . . . .  15
   7.  Security Considerations . . . . . . . . . . . . . . . . . . .  16
   8.  References  . . . . . . . . . . . . . . . . . . . . . . . . .  17
     8.1.  Normative References  . . . . . . . . . . . . . . . . . .  17
     8.2.  Informative References  . . . . . . . . . . . . . . . . .  19
   Acknowledgements  . . . . . . . . . . . . . . . . . . . . . . . .  19
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  20

1.  Introduction

   This document describes a specification for querying registration
   data using a RESTful web service and uniform query patterns.  The
   service is implemented using the Hypertext Transfer Protocol (HTTP)
   [RFC7230] and the conventions described in [RFC7480].  These uniform
   patterns define the query syntax for the Registration Data Access
   Protocol (RDAP).

   The protocol described in this specification is intended to address
   deficiencies with the WHOIS protocol [RFC3912] that have been
   identified over time, including:

   o  lack of standardized command structures;

   o  lack of standardized output and error structures;

   o  lack of support for internationalization and localization; and



RFC 7482                    RDAP Query Format                 March 2015


   o  lack of support for user identification, authentication, and
      access control.

   The patterns described in this document purposefully do not encompass
   all of the methods employed in the WHOIS and other RESTful web
   services used by the RIRs and DNRs.  The intent of the patterns
   described here are to enable queries of:

   o  networks by IP address;

   o  Autonomous System (AS) numbers by number;

   o  reverse DNS metadata by domain;

   o  nameservers by name;

   o  registrars by name; and

   o  entities (such as contacts) by identifier.

   Server implementations are free to support only a subset of these
   features depending on local requirements.  Servers MUST return an
   HTTP 501 (Not Implemented) [RFC7231] response to inform clients of
   unsupported query types.  It is also envisioned that each registry
   will continue to maintain WHOIS and/or other RESTful web services
   specific to their needs and those of their constituencies, and the
   information retrieved through the patterns described here may
   reference such services.

   Likewise, future IETF standards may add additional patterns for
   additional query types.  A simple pattern namespacing scheme is
   described in Section 5 to accommodate custom extensions that will not
   interfere with the patterns defined in this document or patterns
   defined in future IETF standards.

   WHOIS services, in general, are read-only services.  Therefore, URL
   [RFC3986] patterns specified in this document are only applicable to
   the HTTP [RFC7231] GET and HEAD methods.

   This document does not describe the results or entities returned from
   issuing the described URLs with an HTTP GET.  The specification of
   these entities is described in [RFC7483].

   Additionally, resource management, provisioning, and update functions
   are out of scope for this document.  Registries have various and
   divergent methods covering these functions, and it is unlikely a
   uniform approach is needed for interoperability.




RFC 7482                    RDAP Query Format                 March 2015


   HTTP contains mechanisms for servers to authenticate clients and for
   clients to authenticate servers (from which authorization schemes may
   be built), so such mechanisms are not described in this document.
   Policy, provisioning, and processing of authentication and
   authorization are out of scope for this document as deployments will
   have to make choices based on local criteria.  Supported
   authentication mechanisms are described in [RFC7481].

2.  Conventions Used in This Document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

2.1.  Acronyms and Abbreviations

      IDN: Internationalized Domain Name

      IDNA: Internationalized Domain Names in Applications, a protocol
      for the handling of IDNs.

      DNR: Domain Name Registry

      NFC: Unicode Normalization Form C [Unicode-UAX15]

      NFKC: Unicode Normalization Form KC [Unicode-UAX15]

      RDAP: Registration Data Access Protocol

      REST: Representational State Transfer.  The term was first
      described in a doctoral dissertation [REST].

      RESTful: An adjective that describes a service using HTTP and the
      principles of REST.

      RIR: Regional Internet Registry

3.  Path Segment Specification

   The base URLs used to construct RDAP queries are maintained in an
   IANA registry described in [RFC7484].  Queries are formed by
   retrieving an appropriate base URL from the registry and appending a
   path segment specified in either Sections 3.1 or 3.2.  Generally, a
   registry or other service provider will provide a base URL that
   identifies the protocol, host, and port, and this will be used as a
   base URL that the complete URL is resolved against, as per Section 5





RFC 7482                    RDAP Query Format                 March 2015


   of RFC 3986 [RFC3986].  For example, if the base URL is
   "https://example.com/rdap/", all RDAP query URLs will begin with
   "https://example.com/rdap/".

   The bootstrap registry does not contain information for query objects
   that are not part of a global namespace, including entities and help.
   A base URL for an associated object is required to construct a
   complete query.

   For entities, a base URL is retrieved for the service (domain,
   address, etc.) associated with a given entity.  The query URL is
   constructed by concatenating the base URL to the entity path segment
   specified in either Sections 3.1.5 or 3.2.3.

   For help, a base URL is retrieved for any service (domain, address,
   etc.) for which additional information is required.  The query URL is
   constructed by concatenating the base URL to the help path segment
   specified in Section 3.1.6.

3.1.  Lookup Path Segment Specification

   A simple lookup to determine if an object exists (or not) without
   returning RDAP-encoded results can be performed using the HTTP HEAD
   method as described in Section 4.1 of [RFC7480].

   The resource type path segments for exact match lookup are:

   o  'ip': Used to identify IP networks and associated data referenced
      using either an IPv4 or IPv6 address.

   o  'autnum': Used to identify Autonomous System number registrations
      and associated data referenced using an asplain Autonomous System
      number.

   o  'domain': Used to identify reverse DNS (RIR) or domain name (DNR)
      information and associated data referenced using a fully qualified
      domain name.

   o  'nameserver': Used to identify a nameserver information query
      using a host name.

   o  'entity': Used to identify an entity information query using a
      string identifier.








RFC 7482                    RDAP Query Format                 March 2015


3.1.1.  IP Network Path Segment Specification

   Syntax: ip/<IP address> or ip/<CIDR prefix>/<CIDR length>

   Queries for information about IP networks are of the form /ip/XXX/...
   or /ip/XXX/YY/...  where the path segment following 'ip' is either an
   IPv4 dotted decimal or IPv6 [RFC5952] address (i.e., XXX) or an IPv4
   or IPv6 Classless Inter-domain Routing (CIDR) [RFC4632] notation
   address block (i.e., XXX/YY).  Semantically, the simpler form using
   the address can be thought of as a CIDR block with a bitmask length
   of 32 for IPv4 and a bitmask length of 128 for IPv6.  A given
   specific address or CIDR may fall within multiple IP networks in a
   hierarchy of networks; therefore, this query targets the "most-
   specific" or smallest IP network that completely encompasses it in a
   hierarchy of IP networks.

   The IPv4 and IPv6 address formats supported in this query are
   described in Section 3.2.2 of RFC 3986 [RFC3986] as IPv4address and
   IPv6address ABNF definitions.  Any valid IPv6 text address format
   [RFC4291] can be used.  This includes IPv6 addresses written using
   with or without compressed zeros and IPv6 addresses containing
   embedded IPv4 addresses.  The rules to write a text representation of
   an IPv6 address [RFC5952] are RECOMMENDED.  However, the zone_id
   [RFC4007] is not appropriate in this context; therefore, the
   corresponding syntax extension in RFC 6874 [RFC6874] MUST NOT be
   used, and servers are to ignore it if possible.

   For example, the following URL would be used to find information for
   the most specific network containing 192.0.2.0:

   https://example.com/rdap/ip/192.0.2.0

   The following URL would be used to find information for the most
   specific network containing 192.0.2.0/24:

   https://example.com/rdap/ip/192.0.2.0/24

   The following URL would be used to find information for the most
   specific network containing 2001:db8::0:

   https://example.com/rdap/ip/2001:db8::0










RFC 7482                    RDAP Query Format                 March 2015


3.1.2.  Autonomous System Path Segment Specification

   Syntax: autnum/<autonomous system number>

   Queries for information regarding Autonomous System number
   registrations are of the form /autnum/XXX/... where XXX is an asplain
   Autonomous System number [RFC5396].  In some registries, registration
   of Autonomous System numbers is done on an individual number basis,
   while other registries may register blocks of Autonomous System
   numbers.  The semantics of this query are such that if a number falls
   within a range of registered blocks, the target of the query is the
   block registration and that individual number registrations are
   considered a block of numbers with a size of 1.

   For example, the following URL would be used to find information
   describing Autonomous System number 12 (a number within a range of
   registered blocks):

   https://example.com/rdap/autnum/12

   The following URL would be used to find information describing 4-byte
   Autonomous System number 65538:

   https://example.com/rdap/autnum/65538

3.1.3.  Domain Path Segment Specification

   Syntax: domain/<domain name>

   Queries for domain information are of the form /domain/XXXX/...,
   where XXXX is a fully qualified (relative to the root) domain name
   (as specified in [RFC0952] and [RFC1123]) in either the in-addr.arpa
   or ip6.arpa zones (for RIRs) or a fully qualified domain name in a
   zone administered by the server operator (for DNRs).
   Internationalized Domain Names (IDNs) represented in either A-label
   or U-label format [RFC5890] are also valid domain names.  See
   Section 6.1 for information on character encoding for the U-label
   format.

   IDNs SHOULD NOT be represented as a mixture of A-labels and U-labels;
   that is, internationalized labels in an IDN SHOULD be either all
   A-labels or all U-labels.  It is possible for an RDAP client to
   assemble a query string from multiple independent data sources.  Such
   a client might not be able to perform conversions between A-labels
   and U-labels.  An RDAP server that receives a query string with a
   mixture of A-labels and U-labels MAY convert all the U-labels to
   A-labels, perform IDNA processing, and proceed with exact-match




RFC 7482                    RDAP Query Format                 March 2015


   lookup.  In such cases, the response to be returned to the query
   source may not match the input from the query source.  Alternatively,
   the server MAY refuse to process the query.

   The server MAY perform the match using either the A-label or U-label
   form.  Using one consistent form for matching every label is likely
   to be more reliable.

   The following URL would be used to find information describing the
   zone serving the network 192.0.2/24:

   https://example.com/rdap/domain/2.0.192.in-addr.arpa

   The following URL would be used to find information describing the
   zone serving the network 2001:db8:1::/48:

   https://example.com/rdap/domain/1.0.0.0.8.b.d.0.1.0.0.2.ip6.arpa

   The following URL would be used to find information for the
   blah.example.com domain name:

   https://example.com/rdap/domain/blah.example.com

   The following URL would be used to find information for the
   xn--fo-5ja.example IDN:

   https://example.com/rdap/domain/xn--fo-5ja.example

3.1.4.  Nameserver Path Segment Specification

   Syntax: nameserver/<nameserver name>

   The <nameserver name> parameter represents a fully qualified host
   name as specified in [RFC0952] and [RFC1123].  Internationalized
   names represented in either A-label or U-label format [RFC5890] are
   also valid nameserver names.  IDN processing for nameserver names
   uses the domain name processing instructions specified in
   Section 3.1.3.  See Section 6.1 for information on character encoding
   for the U-label format.

   The following URL would be used to find information for the
   ns1.example.com nameserver:

   https://example.com/rdap/nameserver/ns1.example.com







RFC 7482                    RDAP Query Format                 March 2015


   The following URL would be used to find information for the
   ns1.xn--fo-5ja.example nameserver:

   https://example.com/rdap/nameserver/ns1.xn--fo-5ja.example

3.1.5.  Entity Path Segment Specification

   Syntax: entity/<handle>

   The <handle> parameter represents an entity (such as a contact,
   registrant, or registrar) identifier whose syntax is specific to the
   registration provider.  For example, for some DNRs, contact
   identifiers are specified in [RFC5730] and [RFC5733].

   The following URL would be used to find information for the entity
   associated with handle XXXX:

   https://example.com/rdap/entity/XXXX

3.1.6.  Help Path Segment Specification

   Syntax: help

   The help path segment can be used to request helpful information
   (command syntax, terms of service, privacy policy, rate-limiting
   policy, supported authentication methods, supported extensions,
   technical support contact, etc.) from an RDAP server.  The response
   to "help" should provide basic information that a client needs to
   successfully use the service.  The following URL would be used to
   return "help" information:

   https://example.com/rdap/help

3.2.  Search Path Segment Specification

   Pattern matching semantics are described in Section 4.1.  The
   resource type path segments for search are:

   o  'domains': Used to identify a domain name information search using
      a pattern to match a fully qualified domain name.

   o  'nameservers': Used to identify a nameserver information search
      using a pattern to match a host name.

   o  'entities': Used to identify an entity information search using a
      pattern to match a string identifier.





RFC 7482                    RDAP Query Format                 March 2015


   RDAP search path segments are formed using a concatenation of the
   plural form of the object being searched for and an HTTP query
   string.  The HTTP query string is formed using a concatenation of the
   question mark character ('?', US-ASCII value 0x003F), the JSON object
   value associated with the object being searched for, the equal sign
   character ('=', US-ASCII value 0x003D), and the search pattern.
   Search pattern query processing is described more fully in Section 4.
   For the domain, nameserver, and entity objects described in this
   document, the plural object forms are "domains", "nameservers", and
   "entities".

   Detailed results can be retrieved using the HTTP GET method and the
   path segments specified here.

3.2.1.  Domain Search

   Syntax: domains?name=<domain search pattern>

   Syntax: domains?nsLdhName=<domain search pattern>

   Syntax: domains?nsIp=<domain search pattern>

   Searches for domain information by name are specified using this
   form:

   domains?name=XXXX

   XXXX is a search pattern representing a domain name in "letters,
   digits, hyphen" (LDH) format [RFC5890] in a zone administered by the
   server operator of a DNR.  The following URL would be used to find
   DNR information for domain names matching the "example*.com" pattern:

   https://example.com/rdap/domains?name=example*.com

   IDNs in U-label format [RFC5890] can also be used as search patterns
   (see Section 4).  Searches for these names are of the form
   /domains?name=XXXX, where XXXX is a search pattern representing a
   domain name in U-label format [RFC5890].  See Section 6.1 for
   information on character encoding for the U-label format.

   Searches for domain information by nameserver name are specified
   using this form:

   domains?nsLdhName=YYYY







RFC 7482                    RDAP Query Format                 March 2015


   YYYY is a search pattern representing a host name in "letters,
   digits, hyphen" format [RFC5890] in a zone administered by the server
   operator of a DNR.  The following URL would be used to search for
   domains delegated to nameservers matching the "ns1.example*.com"
   pattern:

   https://example.com/rdap/domains?nsLdhName=ns1.example*.com

   Searches for domain information by nameserver IP address are
   specified using this form:

   domains?nsIp=ZZZZ

   ZZZZ is a search pattern representing an IPv4 [RFC1166] or IPv6
   [RFC5952] address.  The following URL would be used to search for
   domains that have been delegated to nameservers that resolve to the
   "192.0.2.0" address:

   https://example.com/rdap/domains?nsIp=192.0.2.0

3.2.2.  Nameserver Search

   Syntax: nameservers?name=<nameserver search pattern>

   Syntax: nameservers?ip=<nameserver search pattern>

   Searches for nameserver information by nameserver name are specified
   using this form:

   nameservers?name=XXXX

   XXXX is a search pattern representing a host name in "letters,
   digits, hyphen" format [RFC5890] in a zone administered by the server
   operator of a DNR.  The following URL would be used to find DNR
   information for nameserver names matching the "ns1.example*.com"
   pattern:

   https://example.com/rdap/nameservers?name=ns1.example*.com

   Internationalized nameserver names in U-label format [RFC5890] can
   also be used as search patterns (see Section 4).  Searches for these
   names are of the form /nameservers?name=XXXX, where XXXX is a search
   pattern representing a nameserver name in U-label format [RFC5890].
   See Section 6.1 for information on character encoding for the U-label
   format.






RFC 7482                    RDAP Query Format                 March 2015


   Searches for nameserver information by nameserver IP address are
   specified using this form:

   nameservers?ip=YYYY

   YYYY is a search pattern representing an IPv4 [RFC1166] or IPv6
   [RFC5952] address.  The following URL would be used to search for
   nameserver names that resolve to the "192.0.2.0" address:

   https://example.com/rdap/nameservers?ip=192.0.2.0

3.2.3.  Entity Search

   Syntax: entities?fn=<entity name search pattern>

   Syntax: entities?handle=<entity handle search pattern>

   Searches for entity information by name are specified using this
   form:

   entities?fn=XXXX

   XXXX is a search pattern representing the "FN" property of an entity
   (such as a contact, registrant, or registrar) name as specified in
   Section 5.1 of [RFC7483].  The following URL would be used to find
   information for entity names matching the "Bobby Joe*" pattern:

   https://example.com/rdap/entities?fn=Bobby%20Joe*

   Searches for entity information by handle are specified using this
   form:

   entities?handle=XXXX

   XXXX is a search pattern representing an entity (such as a contact,
   registrant, or registrar) identifier whose syntax is specific to the
   registration provider.  The following URL would be used to find
   information for entity handles matching the "CID-40*" pattern:

   https://example.com/rdap/entities?handle=CID-40*

   URLs MUST be properly encoded according to the rules of [RFC3986].
   In the example above, "Bobby Joe*" is encoded to "Bobby%20Joe*".








RFC 7482                    RDAP Query Format                 March 2015


4.  Query Processing

   Servers indicate the success or failure of query processing by
   returning an appropriate HTTP response code to the client.  Response
   codes not specifically identified in this document are described in
   [RFC7480].

4.1.  Partial String Searching

   Partial string searching uses the asterisk ('*', US-ASCII value
   0x002A) character to match zero or more trailing characters.  A
   character string representing multiple domain name labels MAY be
   concatenated to the end of the search pattern to limit the scope of
   the search.  For example, the search pattern "exam*" will match
   "example.com" and "example.net".  The search pattern "exam*.com" will
   match "example.com".  If an asterisk appears in a search string, any
   label that contains the non-asterisk characters in sequence plus zero
   or more characters in sequence in place of the asterisk would match.
   Additional pattern matching processing is beyond the scope of this
   specification.

   If a server receives a search request but cannot process the request
   because it does not support a particular style of partial match
   searching, it SHOULD return an HTTP 422 (Unprocessable Entity)
   [RFC4918] response.  When returning a 422 error, the server MAY also
   return an error response body as specified in Section 6 of [RFC7483]
   if the requested media type is one that is specified in [RFC7480].

   Partial matching is not feasible across combinations of Unicode
   characters because Unicode characters can be combined with each
   other.  Servers SHOULD NOT partially match combinations of Unicode
   characters where a legal combination is possible.  It should be
   noted, though, that it may not always be possible to detect cases
   where a character could have been combined with another character,
   but was not, because characters can be combined in many different
   ways.

   Clients should avoid submitting a partial match search of Unicode
   characters where a Unicode character may be legally combined with
   another Unicode character or characters.  Partial match searches with
   incomplete combinations of characters where a character must be
   combined with another character or characters are invalid.  Partial
   match searches with characters that may be combined with another
   character or characters are to be considered non-combined characters
   (that is, if character x may be combined with character y but
   character y is not submitted in the search string, then character x
   is a complete character and no combinations of character x are to be
   searched).



RFC 7482                    RDAP Query Format                 March 2015


4.2.  Associated Records

   Conceptually, any query-matching record in a server's database might
   be a member of a set of related records, related in some fashion as
   defined by the server -- for example, variants of an IDN.  The entire
   set ought to be considered as candidates for inclusion when
   constructing the response.  However, the construction of the final
   response needs to be mindful of privacy and other data-releasing
   policies when assembling the RDAP response set.

   Note too that due to the nature of searching, there may be a list of
   query-matching records.  Each one of those is subject to being a
   member of a set as described in the previous paragraph.  What is
   ultimately returned in a response will be the union of all the sets
   that has been filtered by whatever policies are in place.

   Note that this model includes arrangements for associated names,
   including those that are linked by policy mechanisms and names bound
   together for some other purposes.  Note also that returning
   information that was not explicitly selected by an exact-match
   lookup, including additional names that match a relatively fuzzy
   search as well as lists of names that are linked together, may cause
   privacy issues.

   Note that there might not be a single, static information return
   policy that applies to all clients equally.  Client identity and
   associated authorizations can be a relevant factor in determining how
   broad the response set will be for any particular query.

5.  Extensibility

   This document describes path segment specifications for a limited
   number of objects commonly registered in both RIRs and DNRs.  It does
   not attempt to describe path segments for all of the objects
   registered in all registries.  Custom path segments can be created
   for objects not specified here using the process described in
   Section 6 of "HTTP Usage in the Registration Data Access Protocol
   (RDAP)" [RFC7480].

   Custom path segments can be created by prefixing the segment with a
   unique identifier followed by an underscore character (0x5F).  For
   example, a custom entity path segment could be created by prefixing
   "entity" with "custom_", producing "custom_entity".  Servers MUST
   return an appropriate failure status code for a request with an
   unrecognized path segment.






RFC 7482                    RDAP Query Format                 March 2015


6.  Internationalization Considerations

   There is value in supporting the ability to submit either a U-label
   (Unicode form of an IDN label) or an A-label (US-ASCII form of an IDN
   label) as a query argument to an RDAP service.  Clients capable of
   processing non-US-ASCII characters may prefer a U-label since this is
   more visually recognizable and familiar than A-label strings, but
   clients using programmatic interfaces might find it easier to submit
   and display A-labels if they are unable to input U-labels with their
   keyboard configuration.  Both query forms are acceptable.

   Internationalized domain and nameserver names can contain character
   variants and variant labels as described in [RFC4290].  Clients that
   support queries for internationalized domain and nameserver names
   MUST accept service provider responses that describe variants as
   specified in "JSON Responses for the Registration Data Access
   Protocol (RDAP)" [RFC7483].

6.1.  Character Encoding Considerations

   Servers can expect to receive search patterns from clients that
   contain character strings encoded in different forms supported by
   HTTP.  It is entirely possible to apply filters and normalization
   rules to search patterns prior to making character comparisons, but
   this type of processing is more typically needed to determine the
   validity of registered strings than to match patterns.

   An RDAP client submitting a query string containing non-US-ASCII
   characters converts such strings into Unicode in UTF-8 encoding.  It
   then performs any local case mapping deemed necessary.  Strings are
   normalized using Normalization Form C (NFC) [Unicode-UAX15]; note
   that clients might not be able to do this reliably.  UTF-8 encoded
   strings are then appropriately percent-encoded [RFC3986] in the query
   URL.

   After parsing any percent-encoding, an RDAP server treats each query
   string as Unicode in UTF-8 encoding.  If a string is not valid UTF-8,
   the server can immediately stop processing the query and return an
   HTTP 400 (Bad Request) response.

   When processing queries, there is a difference in handling DNS names,
   including those with putative U-labels, and everything else.  DNS
   names are treated according to the DNS matching rules as described in
   Section 3.1 of RFC 1035 [RFC1035] for Non-Reserved LDH (NR-LDH)
   labels and the matching rules described in Section 5.4 of RFC 5891
   [RFC5891] for U-labels.  Matching of DNS names proceeds one label at
   a time because it is possible for a combination of U-labels and
   NR-LDH labels to be found in a single domain or host name.  The



RFC 7482                    RDAP Query Format                 March 2015


   determination of whether a label is a U-label or an NR-LDH label is
   based on whether the label contains any characters outside of the
   US-ASCII letters, digits, or hyphen (the so-called LDH rule).

   For everything else, servers map fullwidth and halfwidth characters
   to their decomposition equivalents.  Servers convert strings to the
   same coded character set of the target data that is to be looked up
   or searched, and each string is normalized using the same
   normalization that was used on the target data.  In general, storage
   of strings as Unicode is RECOMMENDED.  For the purposes of
   comparison, Normalization Form KC (NFKC) [Unicode-UAX15] with case
   folding is used to maximize predictability and the number of matches.
   Note the use of case-folded NFKC as opposed to NFC in this case.

7.  Security Considerations

   Security services for the operations specified in this document are
   described in "Security Services for the Registration Data Access
   Protocol (RDAP)" [RFC7481].

   Search functionality typically requires more server resources (such
   as memory, CPU cycles, and network bandwidth) when compared to basic
   lookup functionality.  This increases the risk of server resource
   exhaustion and subsequent denial of service due to abuse.  This risk
   can be mitigated by developing and implementing controls to restrict
   search functionality to identified and authorized clients.  If those
   clients behave badly, their search privileges can be suspended or
   revoked.  Rate limiting as described in Section 5.5 of "HTTP Usage in
   the Registration Data Access Protocol (RDAP)" [RFC7480] can also be
   used to control the rate of received search requests.  Server
   operators can also reduce their risk by restricting the amount of
   information returned in response to a search request.

   Search functionality also increases the privacy risk of disclosing
   object relationships that might not otherwise be obvious.  For
   example, a search that returns IDN variants [RFC6927] that do not
   explicitly match a client-provided search pattern can disclose
   information about registered domain names that might not be otherwise
   available.  Implementers need to consider the policy and privacy
   implications of returning information that was not explicitly
   requested.

   Note that there might not be a single, static information return
   policy that applies to all clients equally.  Client identity and
   associated authorizations can be a relevant factor in determining how
   broad the response set will be for any particular query.





RFC 7482                    RDAP Query Format                 March 2015


8.  References

8.1.  Normative References

   [RFC0952]  Harrenstien, K., Stahl, M., and E. Feinler, "DoD Internet
              host table specification", RFC 952, October 1985,
              <http://www.rfc-editor.org/info/rfc952>.

   [RFC1035]  Mockapetris, P., "Domain names - implementation and
              specification", STD 13, RFC 1035, November 1987,
              <http://www.rfc-editor.org/info/rfc1035>.

   [RFC1123]  Braden, R., Ed., "Requirements for Internet Hosts -
              Application and Support", STD 3, RFC 1123, October 1989,
              <http://www.rfc-editor.org/info/rfc1123>.

   [RFC1166]  Kirkpatrick, S., Stahl, M., and M. Recker, "Internet
              numbers", RFC 1166, July 1990,
              <http://www.rfc-editor.org/info/rfc1166>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997,
              <http://www.rfc-editor.org/info/rfc2119>.

   [RFC3986]  Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
              Resource Identifier (URI): Generic Syntax", STD 66, RFC
              3986, January 2005,
              <http://www.rfc-editor.org/info/rfc3986>.

   [RFC4291]  Hinden, R. and S. Deering, "IP Version 6 Addressing
              Architecture", RFC 4291, February 2006,
              <http://www.rfc-editor.org/info/rfc4291>.

   [RFC4632]  Fuller, V. and T. Li, "Classless Inter-domain Routing
              (CIDR): The Internet Address Assignment and Aggregation
              Plan", BCP 122, RFC 4632, August 2006,
              <http://www.rfc-editor.org/info/rfc4632>.

   [RFC4918]  Dusseault, L., Ed., "HTTP Extensions for Web Distributed
              Authoring and Versioning (WebDAV)", RFC 4918, June 2007,
              <http://www.rfc-editor.org/info/rfc4918>.

   [RFC5396]  Huston, G. and G. Michaelson, "Textual Representation of
              Autonomous System (AS) Numbers", RFC 5396, December 2008,
              <http://www.rfc-editor.org/info/rfc5396>.






RFC 7482                    RDAP Query Format                 March 2015


   [RFC5730]  Hollenbeck, S., "Extensible Provisioning Protocol (EPP)",
              STD 69, RFC 5730, August 2009,
              <http://www.rfc-editor.org/info/rfc5730>.

   [RFC5733]  Hollenbeck, S., "Extensible Provisioning Protocol (EPP)
              Contact Mapping", STD 69, RFC 5733, August 2009,
              <http://www.rfc-editor.org/info/rfc5733>.

   [RFC5890]  Klensin, J., "Internationalized Domain Names for
              Applications (IDNA): Definitions and Document Framework",
              RFC 5890, August 2010,
              <http://www.rfc-editor.org/info/rfc5890>.

   [RFC5891]  Klensin, J., "Internationalized Domain Names in
              Applications (IDNA): Protocol", RFC 5891, August 2010,
              <http://www.rfc-editor.org/info/rfc5891>.

   [RFC5952]  Kawamura, S. and M. Kawashima, "A Recommendation for IPv6
              Address Text Representation", RFC 5952, August 2010,
              <http://www.rfc-editor.org/info/rfc5952>.

   [RFC7230]  Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer
              Protocol (HTTP/1.1): Message Syntax and Routing", RFC
              7230, June 2014, <http://www.rfc-editor.org/info/rfc7230>.

   [RFC7231]  Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer
              Protocol (HTTP/1.1): Semantics and Content", RFC 7231,
              June 2014, <http://www.rfc-editor.org/info/rfc7231>.

   [RFC7480]  Newton, A., Ellacott, B., and N. Kong, "HTTP Usage in the
              Registration Data Access Protocol (RDAP)", RFC 7480, March
              2015, <http://www.rfc-editor.org/info/rfC7480>.

   [RFC7481]  Hollenbeck, S. and N. Kong, "Security Services for the
              Registration Data Access Protocol (RDAP)", RFC 7481, March
              2015, <http://www.rfc-editor.org/info/rfc7481>.

   [RFC7483]  Newton, A. and S. Hollenbeck, "JSON Responses for the
              Registration Data Access Protocol (RDAP)", RFC 7483, March
              2015, <http://www.rfc-editor.org/info/rfc7483>.

   [RFC7484]  Blanchet, M., "Finding the Authoritative Registration Data
              (RDAP) Service", RFC 7484, March 2015,
              <http://www.rfc-editor.org/info/rfc7484>.







RFC 7482                    RDAP Query Format                 March 2015


   [Unicode-UAX15]
              The Unicode Consortium, "Unicode Standard Annex #15:
              Unicode Normalization Forms", September 2013,
              <http://www.unicode.org/reports/tr15/>.

8.2.  Informative References

   [REST]     Fielding, R., "Architectural Styles and the Design of
              Network-based Software Architectures", Ph.D. Dissertation,
              University of California, Irvine, 2000,
              <http://www.ics.uci.edu/~fielding/pubs/dissertation/
              fielding_dissertation.pdf>.

   [RFC3912]  Daigle, L., "WHOIS Protocol Specification", RFC 3912,
              September 2004, <http://www.rfc-editor.org/info/rfc3912>.

   [RFC4007]  Deering, S., Haberman, B., Jinmei, T., Nordmark, E., and
              B. Zill, "IPv6 Scoped Address Architecture", RFC 4007,
              March 2005, <http://www.rfc-editor.org/info/rfc4007>.

   [RFC4290]  Klensin, J., "Suggested Practices for Registration of
              Internationalized Domain Names (IDN)", RFC 4290, December
              2005, <http://www.rfc-editor.org/info/rfc4290>.

   [RFC6874]  Carpenter, B., Cheshire, S., and R. Hinden, "Representing
              IPv6 Zone Identifiers in Address Literals and Uniform
              Resource Identifiers", RFC 6874, February 2013,
              <http://www.rfc-editor.org/info/rfc6874>.

   [RFC6927]  Levine, J. and P. Hoffman, "Variants in Second-Level Names
              Registered in Top-Level Domains", RFC 6927, May 2013,
              <http://www.rfc-editor.org/info/rfc6927>.

Acknowledgements

   This document is derived from original work on RIR query formats
   developed by Byron J. Ellacott of APNIC, Arturo L. Servin of LACNIC,
   Kaveh Ranjbar of the RIPE NCC, and Andrew L. Newton of ARIN.
   Additionally, this document incorporates DNR query formats originally
   described by Francisco Arias and Steve Sheng of ICANN and Scott
   Hollenbeck of Verisign Labs.

   The authors would like to acknowledge the following individuals for
   their contributions to this document: Francisco Arias, Marc Blanchet,
   Ernie Dainow, Jean-Philippe Dionne, Byron J. Ellacott, Behnam
   Esfahbod, John Klensin, John Levine, Edward Lewis, Mark Nottingham,
   Kaveh Ranjbar, Arturo L. Servin, Steve Sheng, and Andrew Sullivan.




RFC 7482                    RDAP Query Format                 March 2015


Authors' Addresses

   Andrew Lee Newton
   American Registry for Internet Numbers
   3635 Concorde Parkway
   Chantilly, VA  20151
   United States

   EMail: andy@arin.net
   URI:   http://www.arin.net


   Scott Hollenbeck
   Verisign Labs
   12061 Bluemont Way
   Reston, VA  20190
   United States

   EMail: shollenbeck@verisign.com
   URI:   http://www.verisignlabs.com/