Rfc1874
TitleSGML Media Types
AuthorE. Levinson
DateDecember 1995
Format:TXT, HTML
Status:EXPERIMENTAL






Network Working Group                                        E. Levinson
Request for Comments: 1874            Accurate Information Systems, Inc.
Category: Experimental                                     December 1995


                            SGML Media Types

Status of this Memo

   This memo defines an Experimental Protocol for the Internet
   community.  This memo does not specify an Internet standard of any
   kind.  Discussion and suggestions for improvement are requested.
   Distribution of this memo is unlimited.

Abstract

   This document proposes new media sub-types of Text/SGML and
   Application/SGML.  These media types can be used in the exchange of
   SGML documents and their entities.  Specific details for the exchange
   or encapsulation of groups of related SGML entities using MIME are
   currently being considered by the mimesgml Working Group <sgml-
   internet@ebt.com>.

1.      Introduction

   A need exists for the transfer the elements of documents constructed
   using the Standard Generalized Markup Language (SGML) [ISO-8879].
   While the specific details of such transfers are being considered
   general agreement exists on the need to register basic media types
   for the SGML entities not covered by existing types.

   The Standard Generalized Markup Language (SGML) is used to encode
   document structure and a rigorous description of it is left to [ISO-
   8879].  The terms used in the present document attempt to be
   consistent with SGML terminology and usage.

2.       The SGML Media-Types

   There are two media-types for SGML parsable entities, Text/SGML and
   Application/SGML.  Both have the same optional parameters.  Text/SGML
   provides a fallback to Text/Plain for those without SGML capability.
   Senders should base the choice between text and application media-
   types on the entity's content.  Text is suggested for entities that
   would be meaningful to a human being without SGML processing.
   Application/SGML is recommended for all others.






RFC 1874                    SGML Media Types               December 1995


2.1.  Text/SGML

         MIME type name:          Text
         MIME subtype name:       SGML
         Required parameters:     none
         Optional parameters:     charset, SGML-bctf, SGML-boot
         Encoding considerations: may be encoded
         Security considerations: see section 4 below
         Published specification: ISO 8879:1986
         Person and email address to contact for further information:
                                  E. Levinson <ELevinson@Accurate.com>

   The Text/SGML media-type can be employed when the contents of the
   SGML entity is intended to be read by a human and is in a readily
   comprehensible form.  That is the content can be easily discerned by
   someone without SGML display software.  Each record in the SGML
   entity, delimited by record start (RS) and record end (RE) codes,
   must correspond to a line in the Text/SGML body part.

   SGML entities that do not meet the above requirements should use the
   Application/SGML media-type.

   See section 2.3 for a description of the parameters.

2.2.    Application/SGML

         MIME type name:          Application
         MIME subtype name:       SGML
         Required parameters:     none
         Optional parameters:     SGML-bctf, SGML-boot
         Encoding considerations: may be encoded
         Security considerations: see section 4 below
         Published specification: ISO-8879
         Person and email address to contact for further information:
                                  E. Levinson <ELevinson@Accurate.com>

   Use the Application/SGML media-type for SGML text entities that are
   not appropriate for Text/SGML.  When used, each record start (RS) and
   record end (RE) character shall be explicitly represented by the bit
   combination specified in the SGML declaration.

   The parameters are described in the next section.









RFC 1874                    SGML Media Types               December 1995


2.3.    SGML Sub-type Parameters

   The parameters for the Text/ and Application/SGML subtypes are
   defined below.

       charset     The charset parameter for Text/SGML is defined in
                   [RFC-1521], the valid values and their meaning are
                   registered by the Internet Assigned Numbers
                   Authority (IANA) [RFC-1590].  The default charset
                   value for all Text content-types is "us-ascii"
                   [RFC-1521].

                   The charset parameter is provided to permit non-
                   SGML capable systems to provide reasonable
                   behavior when Text/SGML defaults to Text/Plain.
                   SGML capable systems will use the SGML-bctf param-
                   eter.

       SGML-bctf   The SGML-bctf (SGML bit combination transformation
                   format) parameter describes the method used to
                   transform the entity's sequence of constant width
                   binary numbers (called "bit combinations" in [ISO
                   8879, 4.24]) into the octet stream contained in
                   the MIME body part.

                   Valid values for SGML-bctf are the BCTF notation
                   names defined in Annex C of [ISO-10744] and are
                   reproduced for convenience in the Appendix.  The
                   default value is "identity", i.e. perform no
                   transformation.

       SGML-boot   The SGML-boot parameter value is the content-ID of
                   a MIME body part (Application/Octet-stream) that
                   satisfies the requirements of the boot attribute
                   in [ISO-10744].  The Appendix contains a summary
                   of those requirements.  The SGML-boot parameter is
                   only applicable if the SGML entity is a document
                   entity.

3.      Security Considerations

   SGML entities contain information to be parsed and processed by the
   recipient's SGML system.  Those entities may contain and such systems
   may permit explicit system level commands to be execute while
   processing the data.  To the extent that an SGML system will execute
   arbitrary command strings recipients of SGML entities may be at risk.





RFC 1874                    SGML Media Types               December 1995


   Parsable SGML entities may also contain explicit processing
   instructions for a presentation or composition system; use of such
   instructions present concerns similar to those of
   Application/PostScript.

4.      References

       [ISO-8879]
            Information processing -- 8-bit Single-Byte Coded Graphic
            Character Sets -- Part 1: Latin Alphabet No. 1, ISO
            8859-1:1987.

       [ISO-8879]
            ISO 8879:1986, Information processing -- Text and office
            systems -- Standard Generalized Markup Language (SGML).

       [ISO-10744]
            ISO/IEC 10744:1992, Information technology --
            Hypermedia/Time-based Structuring Language (HyTime) (as
            modified by First Proposed Technical Corrigendum, ISO/IEC
            JTC1/SC18 N5027)

       [RFC-1521]
            Borenstein, N., and N. Freed, "MIME (Multipurpose Internet
            Mail Extensions) Part One:  Mechanisms for Specifying and
            Describing the Format of Internet Message Bodies", RFC
            1521, Bellcore, Innosoft, September 1993.

       [RFC-1590]
            Postel, J., "Media Type Registration Procedure", RFC 1590,
            USC/Information Sciences Institute, March 1994.

       [RFC-1642]
            Goldsmith, D., and M. Davis, "UTF-7, A Mail-Safe
            Transformation Format of UNICODE", RFC 1642, Taligent,
            Inc., July 1994.

5.      Author's Address

   Ed Levinson
   Accurate Information Systems, Inc.
   2 Industrial Way
   Eatontown, NJ  07724

   EMail: ELevinson@Accurate.com






RFC 1874                    SGML Media Types               December 1995


APPENDIX

ISO-10744 BCTF Values and Boot Attribute

A.1.    Bit Combination Transformation Format (BCTF) Values

   The following list of Bit Combination Transformation Format (BCTF)
   values is provided as a convenience.  The authoritative source is
   [ISO-10744].

       identity  Each bit combination is represented by a single
                 octet; this BCTF can be used only for entities all
                 of whose bit combinations have a value not exceeding
                 255.

       fixed-2   Each bit combination is represented by exactly 2
                 octets, with the more significant octet first; this
                 BCTF can be used only for entities all of whose bit
                 combinations have a value not exceeding 65535.

       fixed-3   Each bit combination is represented by exactly 3
                 octets, with a more significant octet preceding any
                 less significant octets; this BCTF can be used only
                 for entities all of whose bit combinations have a
                 value not exceeding 16777215.

       fixed-4   Each bit combination is represented by exactly 4
                 octets, with a more significant octet preceding any
                 less significant octets.

       utf-8     Each bit combination is represented by a variable
                 number of octets according to UCS Transformation
                 Format 8 defined in Annex P to be added by the first
                 proposed drafted amendment (PDAM 1) to ISO/IEC
                 10646-1:1993.

       utf-7     Each bit combination is represented by a variable
                 number of octets in the range 0 through 127 as
                 described in [RFC-1642]; this BCTF can be used only
                 for entities all of whose bit combinations have a
                 value not exceeding 65535.

       euc-jp    Each bit combination is treated as a pair of octets,
                 most significant octet first, encoding a character
                 using the
                 Extended_UNIX_Code_Fixed_Width_for_Japanese charset,
                 and is transformed into the variable length sequence
                 of octets that would encode that character using the



RFC 1874                    SGML Media Types               December 1995


                 Extended_UNIX_Code_Packed_Format_for_Japanese char-
                 set.

       sjis      Each bit combination is treated as a pair of octets,
                 most significant octet first, encoding a character
                 using the
                 Extended_UNIX_Code_Fixed_Width_for_Japanese charset,
                 and is transformed into the variable length sequence
                 of octets that would encode that character using the
                 Shift_JIS charset.

A.2.    The Boot Attribute

   The body part specified by the SGML-boot parameter contains a
   sequence of triplets of positive integers separated by white space.
   The triplets correspond to the described character set portion [IS0-
   8879, 13.1.1.2] of the SGML declaration.  SGML-boot provides the
   capability to identify the character set of the document's SGML
   declaration when it uses significant SGML characters [ibid., 4.298]
   in the SGML reference concrete syntax [ibid., 13.4] that have a
   character number [ibid., 4.44] in the document's character set that
   differs from us-ascii.  The default value is "0 128 0", all
   characters are us-ascii.

   Notes: (1) The triplet, <dscn noc bscn> has the following meaning.
   Starting with character number dscn in the us-ascii character set,
   renumber noc characters starting at bscn and incrementing by one.
   Thus, 0 128 0, represents the identity mapping.  (2) The document's
   declaration itself may also redefine the significant SGML characters;
   the boot attribute is intended to bootstrap the SGML system's parse
   of the declaration.